Apart from it being fun all the ebike stuff I expect is a very good interest and educating for the boys getting to know how it all works. Shopping for a light now and that one looks like a goody
I got mine today from another brand just wanted to check but yeah same its amazing also got a fantastic rear light with this one for £21 all in from Azon love the instructions showing the different features see when your on the 4th click the flashing hold the button for couple seconds and the daylight leds come on its a nice thin strip of light at the bottom just like the way new car lights are designed I love this and the fact it's in a deal With a rear red light just now also great features is amazing value cherrs for the review!
Nice, going to look into this model for the wider, brighter the better of feeling safe because yeah, them dam potholes do serious major damage if you ride thru, in, and even long cracks which will get tire in ditch of falling in or thru and tilt bike over to ground. Ive had this experience with them long crack dips and even the onramp curbs of a high lift( from street I turned towards the onramp shoulder but went too sideways and took me on a side fall, not cool but I had my helmet of just a dinging noise ). Oh EBG, I mounted my front motor on my new Fat Tire EBike. They seemed easier of fitting in the disc rotors than the regular 2 inch 26inch tires due to the wide center of having this space of not rubbing disc house. I needed to do the dual for 1 specific reason of balancing the bike out for extreme control and handling of handlebars. Ive learned when having extra weight in back, it throws off my handling of handlebars and moments on bumps of the fly off or lift besides the extra need for gripping handlebars like holding weight.
I just mounted on another 1000watt front gearless to use for Turbo Booster. This latest set up worked out extremely well for the 2nd throttle bar is on right side as the same side as my base gear 1000watt throttle for it was a stock THUMB Throttle which gave me space to use both throttles on same side of right sides over my past builds of throttles on both sides. Bike is now just 2000 to 2500 watts of 36mph tops ( the speed limit I wont exceed over due to my preferred use for safety) Bike works great when uphill excellerating no matter the degree angle but tha BALANCING OF WEIGHT of back to front has given the suspension and handling like a Mercedes, lol..
This light is really good for the money, and the way you can use it as a power bank is a nice touch, and the main thing for any ride at night is to be seen by other road users. Had this light for a while now, and it hasn't let me down, plus I feel safer. Compared to some lights that they are bringing out for crazy money, this light seems to hold its own. Good review on the Newbola light. Be safe and keep up the good work. Take care 👍
I have that same bike light. I love it. Everyone asks me where did I get it. It's a very good and bright light. My only negative comment is that it doesn't last long. I charge it every other ride.
@@E-bikeguy You won't be disappointed. When you're using it, place your hand over the light. It gets very hot. It's using a lot of energy, which is why it has to be charged often. I bet you could design and build an excellent light. You're very talented.
I think for my bike lights I am gonna attach this small usb solar battery bank I have somewhere on my bike and have my lights wired up to it so they never need charged. We will see if I can run the cables clean enough. There is already and extra brake cable running to the trailer, and turn signal / brake light wires too.
I used this one time during a rain, water entered. There is absolutely no waterproofing. I had to take apart and dry for hours before it worked again. The heatsink groves are like a water collector and it slowly works itself in. The front screen is losely fitted water definitely get in. This will on be safe on good weather. Even cold damp days condensation creeps in.
@andyfumo8931 The moment I replied that it was a very nice light. Battery completely stopped working and refused to charge. I suspect water shorted the circuit panel. It works with external battery. You can try silicone seal the two end. But the lens is questionable; doesnt appear to be sealed. Taking it apart is extremely difficult as it sandwiched in. Moving anything risk breaking the internal plastic housing or breaking circuit panel that sandwich between aluminum frame and led housing. If they manufactured two o rings at the end and a sealed lens this would have been perfect.
Seems to be a good selection of cheap bright led strips out there. I have people flashing their brights at me often. Lol. Love that bracket on that one!
That's because it has no cut off and you're blinding them as you essentially are running a high beam. Can get something like a King kong 6 series ray which has a legit low beam and a high beam via remote Low beam on the street, high beam for the single track for about $35
I saw a man doing a Yamaha 250 Dual Sport build use this brand. I just happened to remember the name but now I'm curious if it held up on his bike? Lights have come an awful long way, smaller yet more powerful/brighter. What was the cost of this & does it just have it's own battery that you must charge or does it have a way to hook into your bikes battery system? You may have told us all of this, I miss stuff all the time getting in a hurry, if so, My Bad. Thanks for the UnBoxing. MC
I need a lightbar style one for my bicycle camper...I will check this one out. I already got lights on my ebike. I just ordered the first time on Temu too and they sent some discounts for next purchases so maybe I will make use of em on a couple of these.
This was both an informative and wholesome video at the same time 😊The light looks very bright. Do you know if you can charge it while using it at the same time? I want to be able to use the light fully charged while it's being powered by a power bank at the same time and not necessarily use the light as the power bank feature.
Hey, I am building an Ebike with an NB power kit, but I am really worried about it getting stolen. Is the any way I can install a kill switch on the bike that requires a key for it to start? Also do you recommend any tracking devices to locate the bike. I do not have an iPhone so I cannot use air tags. I am just generally worried about theft, and would like to have some piece of mind. Thanks, your content is an inspiration to us all.
Thread tap / chaser in proper size. If it is stripped and you cannot get nut off, it is basically buggered. You"ll have to still get the nut off, but the threads will be gone.
i want to re thread it but im not very experienced worst part is the build was almost finished the torque arm i had was supplied by the shipper as a conversion kit and it broke straight snapped off so ive bought 3 of them+ a box of jubilee clips hopfully to support it with 2 jubilee clips instead of 1 for eachj torque arm meaning double the normal durability@@E-bikeguy
so the nut isnt on its just the first bit of the thread as tyou put the nut on its a bit damaged ish i just need the axle threaded a bit near the end but i dont really have the experience or know how to do it @@AaronHendu
Does it come with a rear light? I saw your rear light on the video and it seems bright. I’ve been looking for a bright rear light. Could you link me your one or suggest me some bright ones?
@@E-bikeguy Right on Hit me up when you're ready that's all I do On social media is help people build razors for years. I'll definitely try to get you my cost on everything or even lose some money if you do a video about the product And you're honest opinion 🤷🏻♂️ appreciate you bro
Gotta ask but do you guys have so kind of unnatural aversion to wearing helmets? Or is it case that wearing a helmet doesn’t make you look “manly”? Either child to allow kids to ride an e-bike at night without wearing a helmet must be one of the most dangerous and stupid things I’ve ever seen broadcast on TH-cam. BTW: I’ve got the same light but it didn’t come shipped with the extra Go Pro mounting gear. Cracking bit of kit, I must agree.
nah iam not a fan of these... add up extra weight in the front and the batt. degrades fast on these... i have separate 12V pack for my Bomber bike, and on the small bikes i hook it up to the main power... no more running out of light :)
Hi , was wondering if you could do a FaceTime for 30 minutes and walk me through sabvoton settings to my Ariel Ryder, I’m in Brooklyn and it’s not not worth the cost . Please Help . I can send a contribution to your channel. Big Fan learned a lot from watching it’s my first time with the new hardware. Stay safe everyone-Ebros.
Looks like you are doing a good job with them kids
A good Dad is a rare thing now days...
Lol yes, 💯 and your right, it's sad to say but most dads that do have kids are either in jail or just not in the kids life
It’s kinda sad I need a battery built by you fr
Apart from it being fun all the ebike stuff I expect is a very good interest and educating for the boys getting to know how it all works. Shopping for a light now and that one looks like a goody
I love that yall are riding together as a group. Seems like so much fun- a group night ride.
I got mine today from another brand just wanted to check but yeah same its amazing also got a fantastic rear light with this one for £21 all in from Azon love the instructions showing the different features see when your on the 4th click the flashing hold the button for couple seconds and the daylight leds come on its a nice thin strip of light at the bottom just like the way new car lights are designed I love this and the fact it's in a deal
With a rear red light just now also great features is amazing value cherrs for the review!
Thanks for actually going on a trail to show it off, some reviewers won't even test it on their backyards haha
@Cosmic-Bear. lol yes i know I'll be doing another test on a different list soon
Nice, going to look into this model for the wider, brighter the better of feeling safe because yeah, them dam potholes do serious major damage if you ride thru, in, and even long cracks which will get tire in ditch of falling in or thru and tilt bike over to ground. Ive had this experience with them long crack dips and even the onramp curbs of a high lift( from street I turned towards the onramp shoulder but went too sideways and took me on a side fall, not cool but I had my helmet of just a dinging noise ). Oh EBG, I mounted my front motor on my new Fat Tire EBike. They seemed easier of fitting in the disc rotors than the regular 2 inch 26inch tires due to the wide center of having this space of not rubbing disc house. I needed to do the dual for 1 specific reason of balancing the bike out for extreme control and handling of handlebars. Ive learned when having extra weight in back, it throws off my handling of handlebars and moments on bumps of the fly off or lift besides the extra need for gripping handlebars like holding weight.
I just mounted on another 1000watt front gearless to use for Turbo Booster. This latest set up worked out extremely well for the 2nd throttle bar is on right side as the same side as my base gear 1000watt throttle for it was a stock THUMB Throttle which gave me space to use both throttles on same side of right sides over my past builds of throttles on both sides. Bike is now just 2000 to 2500 watts of 36mph tops ( the speed limit I wont exceed over due to my preferred use for safety) Bike works great when uphill excellerating no matter the degree angle but tha BALANCING OF WEIGHT of back to front has given the suspension and handling like a Mercedes, lol..
@@user619tlsdca5yo bro you in San Diego? I need advice on customizing a chopper ebike
This light is really good for the money, and the way you can use it as a power bank is a nice touch, and the main thing for any ride at night is to be seen by other road users. Had this light for a while now, and it hasn't let me down, plus I feel safer. Compared to some lights that they are bringing out for crazy money, this light seems to hold its own. Good review on the Newbola light. Be safe and keep up the good work. Take care 👍
Yes lol, I'm thinking about get them for my kids bike!
Definitely the brightest light oit there! I love it.
I have that same bike light. I love it. Everyone asks me where did I get it. It's a very good and bright light. My only negative comment is that it doesn't last long. I charge it every other ride.
Oh ok I haven't ran it down as of yet but it's definitely bright!!!
@@E-bikeguy You won't be disappointed. When you're using it, place your hand over the light. It gets very hot. It's using a lot of energy, which is why it has to be charged often. I bet you could design and build an excellent light. You're very talented.
@@ProfessorStephon I agree, i seen videos of guys making batteries, i think EBG could find a great bulb and build a power source around it
I think for my bike lights I am gonna attach this small usb solar battery bank I have somewhere on my bike and have my lights wired up to it so they never need charged. We will see if I can run the cables clean enough. There is already and extra brake cable running to the trailer, and turn signal / brake light wires too.
Just power the light off the bike directly..small solar panels will take a while charging this big ass light
Hey, I appreciate your videos. I have the new bowler.
Half the length.
But I double up quality stuff. It holds product good job brother
We bought same similar light but from Aliexpress....very bright!
Nice video. Great job guiding all of them young ones. 😁
Thank you they love it more than me lol
I used this one time during a rain, water entered. There is absolutely no waterproofing. I had to take apart and dry for hours before it worked again. The heatsink groves are like a water collector and it slowly works itself in. The front screen is losely fitted water definitely get in. This will on be safe on good weather. Even cold damp days condensation creeps in.
Oh wow 😳 thanks for the good info!!
@@E-bikeguy it is a very nice light at this price point.
Have you tried to waterproof it?
@andyfumo8931 The moment I replied that it was a very nice light. Battery completely stopped working and refused to charge. I suspect water shorted the circuit panel. It works with external battery. You can try silicone seal the two end. But the lens is questionable; doesnt appear to be sealed. Taking it apart is extremely difficult as it sandwiched in. Moving anything risk breaking the internal plastic housing or breaking circuit panel that sandwich between aluminum frame and led housing. If they manufactured two o rings at the end and a sealed lens this would have been perfect.
All the best for 2024 man! Im seeing 20k subscribers buy the end of 2024💥💣 🎉
Ye ebike guy it's deffo a great light I like the wide angle it gives out unlike mine is just a circle on the floor deffo getting one,
Great video 👍🏻👊
Yes, that us one thing I like about this light.
It looks as bright as a good automobile LED headlight.
Seems to be a good selection of cheap bright led strips out there. I have people flashing their brights at me often. Lol. Love that bracket on that one!
That's because it has no cut off and you're blinding them as you essentially are running a high beam.
Can get something like a King kong 6 series ray which has a legit low beam and a high beam via remote
Low beam on the street, high beam for the single track for about $35
Nice! I got one of those lights from Aliexpress a while back
That is EOS 640 in Indonesian market.. so bright it almost like a car's headlight 😂
Great video, nice family too 👍🏾
Thank you very much 💯
Such an awesome person. Thank you for all your help with my setup
No problem at all!!!
Couple different names for them now but same light one is greenlance there easier to find but exactly the same light and the smaller one there amazing
Hope you had a great Christmas and have a great new year from over here in the UK
Oh yes, I did merry Christmas to you and your family!!
I saw a man doing a Yamaha 250 Dual Sport build use this brand. I just happened to remember the name but now I'm curious
if it held up on his bike? Lights have come an awful long way, smaller yet more powerful/brighter. What was the cost of this
& does it just have it's own battery that you must charge or does it have a way to hook into your bikes battery system? You
may have told us all of this, I miss stuff all the time getting in a hurry, if so, My Bad. Thanks for the UnBoxing. MC
All that light back on a wooded trail might get a glimpse of a skunk-ape(aka BigFoot)? Nothing would surprise me.
🤣🤣🤣🤣 right!!!! Skunk
Yeah look after yourselves out there in winter, bad lighting can cause accidents, stay visible and see 😊
Yiii nice its very solid too 😃👍
You're the only one i found to do an actual review. Thanks man! Do you know if it will fit on a 1.2-inch handle bar?
I believe so, 🙏
I like the ebike crew. Sounds like a t-shirt idea.
Yes,, I agree
love your videos
I have a question after buying one. Ever notice any random beeping when unit is off in daylight? I mean randomly(seems to me) 3 beeps in a row.
@@RickStamler no. I haven't noticed anything like what you had mentioned
I got the same light different brand. It's bright but gets very hot
I definitely can feel the heat off the bad boy
Not bashing it but it’s a copy of the acrunu lights on Amazon and they’re 45.99 right now. Me and my neighbor have been using them on every bike
I see after the fact lol but still bright tho
@@E-bikeguy definitely. Most likely an exact copy form the same factory. Absolutely love mine
I have a comtroller with no ligjt conmectors how do i go about connecting a light bar to it?
yea buddy upgrades is always cool.
Oh heck yeah, plus it look cool too
Thanks for sharing your videos
No problem at all,👊🏿
Ima get 1 my m8 has 1 . We use him up front wen we ride through dark trails cause its so bright 😂😂
I need a lightbar style one for my bicycle camper...I will check this one out. I already got lights on my ebike. I just ordered the first time on Temu too and they sent some discounts for next purchases so maybe I will make use of em on a couple of these.
What's the best battery I can get for my happy run
Would this headlight be good on a fucare gemini x? Been wanting to upgrade the light on mine.
@@kireacts6026 of course! Very bright also
@@E-bikeguy thanks man
@@E-bikeguy should I get a large or medium?
wish you well Merry Christmas and Happy new year!
Thank you bro!!!!
This was both an informative and wholesome video at the same time 😊The light looks very bright.
Do you know if you can charge it while using it at the same time? I want to be able to use the light fully charged while it's being powered by a power bank at the same time and not necessarily use the light as the power bank feature.
Hum, I never tried to use it like I bet it l will last all night I'll definitely look in to it tho because that will be very nice
I see a guy on TH-cam that had brush cutters mounted to his front fork.
Hey, I am building an Ebike with an NB power kit, but I am really worried about it getting stolen. Is the any way I can install a kill switch on the bike that requires a key for it to start? Also do you recommend any tracking devices to locate the bike. I do not have an iPhone so I cannot use air tags. I am just generally worried about theft, and would like to have some piece of mind. Thanks, your content is an inspiration to us all.
You can add a hidden switch to your bike also add a tracker to your bike is a very good investment
How long did it last? Hours?
@@Motor_mysticz on the high setting. 4 hours
Hi what up EBG thats a good headlight and i just wanted to know are you still customizing bikes because i emailed you twice and you never responded?
I thought I emailed you because I do answer all my emails 💯 but yes I still do customize ebikes
If you did I never received it or I got the email wrong and have been emailing someone else lol
@@sdot689 theebikeguy08@gmail.com
TMoo....😂
New sub!
Ty bub!
Thank you 💯 👊🏿👊🏿
bad experience with that headlight from newboler. i did a review on it
I waited and I rode it for a while and yet have no problems so far if I do i will do a nother review on it.💯💯💯
This looks exactly the same as the one I got on Amazon for 40$..except the name is different, the packaging is even the same
The one I got has WSCXSC written on it. It’s on Amazon listed at 3000 lumens..same exact settings
I have one for my electric. Bike and that light is super super bright its like having a light bar
My thread is cross threaded on the axle any tips to fix it
You can re thead it or buy a new axle, my son's is messed up also IL going to do a video on how to replace the axle.
Thread tap / chaser in proper size. If it is stripped and you cannot get nut off, it is basically buggered. You"ll have to still get the nut off, but the threads will be gone.
i want to re thread it but im not very experienced worst part is the build was almost finished the torque arm i had was supplied by the shipper as a conversion kit and it broke straight snapped off so ive bought 3 of them+ a box of jubilee clips hopfully to support it with 2 jubilee clips instead of 1 for eachj torque arm meaning double the normal durability@@E-bikeguy
so the nut isnt on its just the first bit of the thread as tyou put the nut on its a bit damaged ish i just need the axle threaded a bit near the end but i dont really have the experience or know how to do it
@@AaronHendu
does anyone elses only charge to 2 bars?
Hey EBG .. You know of any 12v battery turn signal sets ? Thanks
I'm actually doing some research for a customer
Does it come with a rear light? I saw your rear light on the video and it seems bright. I’ve been looking for a bright rear light. Could you link me your one or suggest me some bright ones?
@wariframadan1146 they are separate, the rear light is a magicshine seemee 200
@@E-bikeguy appreciate it
Temu got spot welders half price compared to aliexpress
Dang that's nice to know!!!
Yo yo yo yo yo yo
👀🏴
Where are you located? Id like you to build me a bike!
I'm in central Florida 👊🏿
How much is your e-bikes cost for 8000 w
5,980 for one
alliexpress has them cheaper i got 2 on sale for 10.00 each
Wow I need to check it out
I got to get 3
Yo brother ebike guy can you tell me what gauge spoke do you use
I believe 12awg spokes
@@E-bikeguy do you know where to buy it, because I'm from Malaysia
@@zore9297 ND Ebike Factory Store
a.aliexpress.com/_mLxLgOu
Hey do you do battery repairs
I can do repairs on battery
@@E-bikeguy is there a way I could reach out to you for more info.
@@E-bikeguy I know people hate repairing packs but thought I’d ask. Your work looks very promising
You ever thinking about building a razor?? Emf Will hook you up with the best price I can if you ever do hit me up before you start anything 🤙
Ok yes I do want to build one for sure
@@E-bikeguy Right on Hit me up when you're ready that's all I do On social media is help people build razors for years. I'll definitely try to get you my cost on everything or even lose some money if you do a video about the product And you're honest opinion 🤷🏻♂️ appreciate you bro
Amazon better price
Gotta ask but do you guys have so kind of unnatural aversion to wearing helmets? Or is it case that wearing a helmet doesn’t make you look “manly”? Either child to allow kids to ride an e-bike at night without wearing a helmet must be one of the most dangerous and stupid things I’ve ever seen broadcast on TH-cam.
BTW: I’ve got the same light but it didn’t come shipped with the extra Go Pro mounting gear. Cracking bit of kit, I must agree.
nah iam not a fan of these... add up extra weight in the front and the batt. degrades fast on these... i have separate 12V pack for my Bomber bike, and on the small bikes i hook it up to the main power... no more running out of light :)
Hi , was wondering if you could do a FaceTime for 30 minutes and walk me through sabvoton settings to my Ariel Ryder, I’m in Brooklyn and it’s not not worth the cost . Please Help . I can send a contribution to your channel. Big Fan learned a lot from watching it’s my first time with the new hardware. Stay safe everyone-Ebros.
I don't have a iPhone but if you have a Facebook account you can message me there on ebike life east coast
Are you available for a walkthrough the parameters settings, I can donate something, LMK