Nice trick i usually go and feel smell or touch too see whats hot and if its really hot i change it and usually it is my short . I been installing and repairing amps since the 90s i learned a lot but class d is a different beast and you are the best at explaining how it runs and works all together thanks for such a great channel.
Excellent work. I was going to start a channel doing this for old school amps but maybe I won’t now...you’re a lot better at explaining than I think I could be.
I'm going to try this method to fix my JBL PRX718XLF POWERED SUBWOOFER.....The amplifier works fine and the led lights shows there's signal there but no sound...it just cuts in and out if you remember your live video back a few months ago...thanks brother and keep up the good work!
Never trusted those but i end up feeling better because of you teach lol still would rather stay away just like rockville they lack in certain areas now a days it just seems to be better to buy powerful and run at half throttle🙈🙉🙊 with social media these companies and tech people should be able to see these videos and consult people like you it just makes more sense to make them more Unstoppable! #tarampsdead #alpine #kenwood #sherwood #kicker #pioneer #audiopipe #lanzar #amplifierrepair #ampdead #taramps
Hi I have a taramps md8000.1 that turns on normally but When you try to play music At really low volume You can barely hear the speaker It starts clipping and protection And it sounds really distorted This is on really low volume
I having a problem wit my Hd3000 taramp. It burnt the 2 resistors on the speaker output terminals each on negative and positive sides. It say 10r 3watt on board writing where they were. I changed them to 10 ohm 3 watt resistors but it's playing lower I find I used to get more power. It's like when it's turn up I get the kinda power I used to have at half column wen I test it wit jus my phone and a speaker I test it wit when I just came. Can you help I need to know the type resistors as to color code and what else can be the problem besides
I know this is an old video but I decided to try to contact you here through this one out of just not knowing where else to turn I do have a Taramps Big Boss 3 with this problem but that's not necessarily my concern considering how cheap they are to purchase but I have stumbled across some strange acoustic properties in building a box for the subwoofers that this amplifier is powering it's a ported enclosure for 2:15-in subwoofers but when you run a sweep it plays flat from a low pass all the way to subsonic with no EQ rather unusual but when I go back and review the building choices I made are lending itself to this flat response this box plays very loud but because the response is flat the harmonics with the cabin gain are so uniform it's unreal... The box is tuned to 32 Hertz and like I said if you run a sweep from 25 to 70 hz it'll be flat all the way to your subsonic I tried to invert the subs in the same enclosure with results that were ridiculous the tuning changed so dramatically it peaked at 29 hz rolled off sharp above but extended way down into the teens... This is an exceptionally unique box and I know you like acoustics.
@@davidvarner8793 I'm starting to understand this, and it's quite hard to read without punctuation. Sounds like you have something weird going on there though. Perhaps the subs weren't sealed against the wood and when you flip them you made the seal. I don't know, doesn't sound right.
@@barevids The design of the box is rather unique it's on a solid platform every wall is single walled except for the baffle the interior port wall The enclosure is 24 and 1/4 in tall up firing up ports independent chamber independent ports when you drop the subwoofer in this box you get great extension because of the distance from the loading wall but when you invert it it's like hollering down a railway tunnel... The box sounds amazing and the design features lend to a very high SPL it directs pressure to and through the port...
Okay after a little bit more time and testing because this box has independent chambers, I inverted one subwoofer and regular mounted the other. I achieved the results that I would have got with each orientation coming from a single box. Which was a bandwidth that is the sum of the two orientations. It goes from the low pass filter to subsonic with an extremely shallow slope to the upper teens. It is about acoustics and pressure distribution. It is actually quite technical but I know you can understand.
what do you think i fried in my amp earlier whenever i forgot i hadn’t unhooked the power and stuck a screwdriver in the positive terminal on my TS 400x4 and it bumped against the outer frame for a very brief moment and i got a little bity ark and now it won’t power on i’ve checked and i have 12.6 v at the amp and the fuse inside looks good but i’m gonna check it in the morning and hopefully it blew but i don’t believe it did
I have a smart3k and something touched my output terminals well one of them for sure. And now it is making a light rumbling sound when the power comes on. It works ok but it sounds like a ground issue but I know it’s not that because I hooked up another amp to see if it was gana make the same rumbling sound and it was just fine. I think something happened to the output because at first it was making a loud popping sound in all of my 4 subs like really loud. And when I turn it up with a lot of bass it starts acting weird and pops my subs and the amp goes into protect and resets itself but it does come back on. But that light rumbling sound is still there. Could the output to the subs be messed up?
sir good day and thanks for the video , i have trouble for on taramps hd3000 to square wave signal generated input of mosfet driver, at the amplifier section i suspect that the comparator chip with dual output (c16 at the schematic) is damage due to emitting lot of heat , may main problem is i don't know if what is the part number. Sir do you know the part number of this chip or any replacement? thanks
What is the difference between the taramps HD 3000.1 and the MD 3000.1. I found them for the exact price so I need it for a single 12 sub what would be better. I appreciate if you can tell me.thanks
would u be interested in working on 2 of mine old school amp? do u have a email? the earthquake 50 cheater amp 1 Channel not working and same with the zapco amp cant Bridge in the channel as the left channel is not working..
If my taramps is cycling power, clip, and protect is it blown? I heard I can reset it by taking out of car and jumping power and ground? Is that correct?
Hey hope all is well with you i was wondering if you probably know why my hd5000 taramp amplifier passing or leaking voltages on the out circut or should i say terminals?
Do you, or anyone else know if its possible to change the type of low and high pass crossovers? I have a Taramps smart 3, brand new. I waited a while before I installed it and as soon as I tried it I noticed I had a high pitch squeal coming from one of the fans as soon as the amp starts. It'll stop after a few min but nevertheless it's there.... and hella annoying 🙄! I can't return it because I exceeded the return period because I had to wait to install due to all the COVID19 BS. Then after tuning it I noticed that this amp does not like low bass notes... it is very annoying. It would be great if it weren't for that, ohh and worst of all some voice creeps through the filters somehow and that makes me want to smash it with a sledge hammer and stomp it like I was doing a Riverdance/B-walk/C-walk! Anyone that could help? Besides the obvious 🙄 of buying a different amp. I have other amps but one is 900wrms and other is supposedly 1kw. I am pushing 2 subs that can take up to 2kw each.
Awesome debugging skills. Can you please let me know how is the modulation done. What kind of device is used as modulator, a normal opamp with high GBP 15Mhz or some transconductance type opamp? Is it not the self oscillating circuit as even without the Fets being switched, you see drive signals? I'm mostly interested to know the devices close to the red preset inbetween the huge copper jumper and bulk capacitors
Im a newbie and trying to figure out how to do amplifier repair. Im completely lost at what you were explaining. Lool Do you really need an oscilloscope to double check the parameters on the components or can I just check using a multimeter in circuit? What do you use to turn the amp on at home?
Thank for your video very very helpful.....quick question is possible I can mail u an amp so u can fix it an ill pay you ....if is possible please let me know....I like to fix things but I don't have the full equipment an experience...honestly I think I found a new teacher....thanks an I will wait for ur reply....thanks
Scope shares a ground with bench supply negative. There is slight noise as a result but any time I need to read critical low voltage waveforms I attach a local ground clip.
@@Mocredible you can use a multimeter to find dead fets and shorted drive transistors, open gate resistors etc. Amp Repair cannot be carried out without a multimeter. However without a scope you are risking the chance that you missed something and your new fets will blow the second you install them. Without a scope you also can't confirm integrity of the class D circuit once all new parts are fitted. It's possible to get an amp working again with MM only, but only if you are lucky, or already have years of experience with a scope to know what to look for without it.
Hey Sam, I got two stetsom ex 10.5k's I'm tinkering with. One powers on and puts out signal except bass, soon as a bass note hits it goes protect. The other one is a little sketchy.. I'm at a loss with these Brazilians...lol
I've eagerly watched every video of yours I can get my hands on. Ive also search to try find a few books regarding class D operation and amplifier workings. Are there any books you can recommend for me to read? I need to know how the whole thing works and understand that that is a huge undertaking....lol Further regarding oscilloscopes are there any relatively inexpensive ones that you would recommend?
@@barevids thank you!!! I love your vids! I have learned a TON of info and usually need to watch them several times over to retain all the information you are giving!! Thank you again for the awesome vids!!!
Hi i'm new here and really love what you do...I've got a soundstream XBP-10 that turns on and i'm getting no sound out of it,my sub blew along with my amp I've replace my sub and got the amp repaired but no one wants to repair my Bass machine just by looking at it but i want to have a go at it myself any kind of help will be greatly appreciated
I have a ? for you Sam.(barevids) Have you ever worked on an amp that the turn on lead would have a current draw without being triggered? I couldn't find and inbox to send this ? to you personally so I but it here.. Thanks for any help..
They look diffrent than most because they are fullbridged technology. Most Korean an china amps are half bridge designs so it requires alot more components. Brazilian amps are usually full bridge. Few other companys also use it like kicker, jl, a couple amps from ds18 and audiopipe are using fullbridfed designs now. It's not new.
Emf has a video of why brazillian fullbridge amps dont put out as much power in the lowerhz as his half bridged amps. Shady stuff. I hope you watch it and let us know what you think.
Nice trick i usually go and feel smell or touch too see whats hot and if its really hot i change it and usually it is my short . I been installing and repairing amps since the 90s i learned a lot but class d is a different beast and you are the best at explaining how it runs and works all together thanks for such a great channel.
would u be interested in working on mine amps? I got a earthquake cheater and zapco c2k 9.0?
Lmk if u wanna fix my amp ,
Excellent work. I was going to start a channel doing this for old school amps but maybe I won’t now...you’re a lot better at explaining than I think I could be.
Old school amps are mostly class A/B which are different from class d and in my opinion sound better for sq set ups
@@fortheprofit2186 and are easier to repair than class d
Brilliant! I would have never thought about that trick with the thermal imaging camera.
how do you fit all this knowledge inside that noggin I'll never understand. Wish I had 1 day to learn from you. You are totally helpful! Thanks!
GR8T ride along & data dump. Direct, lots of info and fast paced. Nice combination. THANK YOU..
I'm going to try this method to fix my JBL PRX718XLF POWERED SUBWOOFER.....The amplifier works fine and the led lights shows there's signal there but no sound...it just cuts in and out if you remember your live video back a few months ago...thanks brother and keep up the good work!
I'd like to fix car auto amps ... I build cb amp by hand now .. great work bro ..for sure your smart .
Never trusted those but i end up feeling better because of you teach lol still would rather stay away just like rockville they lack in certain areas now a days it just seems to be better to buy powerful and run at half throttle🙈🙉🙊 with social media these companies and tech people should be able to see these videos and consult people like you it just makes more sense to make them more Unstoppable! #tarampsdead #alpine #kenwood #sherwood #kicker #pioneer #audiopipe #lanzar #amplifierrepair #ampdead #taramps
great tip using power supply to heat up shorted component. I learned it from old Louis Rossman.
Absolutely brilliant work!
Hi I have a taramps md8000.1 that turns on normally but When you try to play music At really low volume You can barely hear the speaker It starts clipping and protection And it sounds really distorted This is on really low volume
Great video as always Sam! Keep up the good work.
Will this help with other makes of amps?
Hey can you tell me the voltage of the zeener diode next to the outputs and the wattage.
I have a taramps 2000x4 that protects below 40 degrees lol anything I can fairly easily do?
I having a problem wit my Hd3000 taramp. It burnt the 2 resistors on the speaker output terminals each on negative and positive sides. It say 10r 3watt on board writing where they were. I changed them to 10 ohm 3 watt resistors but it's playing lower I find I used to get more power. It's like when it's turn up I get the kinda power I used to have at half column wen I test it wit jus my phone and a speaker I test it wit when I just came. Can you help I need to know the type resistors as to color code and what else can be the problem besides
Is there any way I could get you to repair a Rockford Fosgate Punch P400x4 for me?
only if you live in the UK brah!
barevids Ah man I'm in the US but thanks for the reply.
hello sir can you help me i have car amplifier mono block brand BUMPER USA.turning on but no sound or no audio out?
I know this is an old video but I decided to try to contact you here through this one out of just not knowing where else to turn I do have a Taramps Big Boss 3 with this problem but that's not necessarily my concern considering how cheap they are to purchase but I have stumbled across some strange acoustic properties in building a box for the subwoofers that this amplifier is powering it's a ported enclosure for 2:15-in subwoofers but when you run a sweep it plays flat from a low pass all the way to subsonic with no EQ rather unusual but when I go back and review the building choices I made are lending itself to this flat response this box plays very loud but because the response is flat the harmonics with the cabin gain are so uniform it's unreal... The box is tuned to 32 Hertz and like I said if you run a sweep from 25 to 70 hz it'll be flat all the way to your subsonic I tried to invert the subs in the same enclosure with results that were ridiculous the tuning changed so dramatically it peaked at 29 hz rolled off sharp above but extended way down into the teens... This is an exceptionally unique box and I know you like acoustics.
@@davidvarner8793 I'm starting to understand this, and it's quite hard to read without punctuation. Sounds like you have something weird going on there though. Perhaps the subs weren't sealed against the wood and when you flip them you made the seal. I don't know, doesn't sound right.
@@barevids The design of the box is rather unique it's on a solid platform every wall is single walled except for the baffle the interior port wall The enclosure is 24 and 1/4 in tall up firing up ports independent chamber independent ports when you drop the subwoofer in this box you get great extension because of the distance from the loading wall but when you invert it it's like hollering down a railway tunnel... The box sounds amazing and the design features lend to a very high SPL it directs pressure to and through the port...
Okay after a little bit more time and testing because this box has independent chambers, I inverted one subwoofer and regular mounted the other. I achieved the results that I would have got with each orientation coming from a single box. Which was a bandwidth that is the sum of the two orientations. It goes from the low pass filter to subsonic with an extremely shallow slope to the upper teens. It is about acoustics and pressure distribution. It is actually quite technical but I know you can understand.
what do you think i fried in my amp earlier whenever i forgot i hadn’t unhooked the power and stuck a screwdriver in the positive terminal on my TS 400x4 and it bumped against the outer frame for a very brief moment and i got a little bity ark and now it won’t power on i’ve checked and i have 12.6 v at the amp and the fuse inside looks good but i’m gonna check it in the morning and hopefully it blew but i don’t believe it did
Maybe a ground trace, but maybe the power supply control circuit.
I need help with a taramps dsp 3000.1 same problem
do the timpano amplifiers have this same problem i had a timpano 800.4 that started clipping on low volume
I'm getting a similar issue but I found the cause of it was a loose terminal block on the negative speaker side. Is there anyway to tighten that?
Resolder
thank you for sharing your vdeo..very details and easy to understand..i need this..thanks.
Muito bom, seu trabalho
Abraços Brasil
Could you help me figure out how to repair the cooling fans on my bass 8k ?
What is the value of the diode that you've change and the wattage
I have a smart3k and something touched my output terminals well one of them for sure. And now it is making a light rumbling sound when the power comes on. It works ok but it sounds like a ground issue but I know it’s not that because I hooked up another amp to see if it was gana make the same rumbling sound and it was just fine. I think something happened to the output because at first it was making a loud popping sound in all of my 4 subs like really loud. And when I turn it up with a lot of bass it starts acting weird and pops my subs and the amp goes into protect and resets itself but it does come back on. But that light rumbling sound is still there. Could the output to the subs be messed up?
Yes definitely, it will need a service!
Can you please tell me the number of output fets
Mine not getting no power at all what could be the problem I gotta Md8000
sir good day and thanks for the video , i have trouble for on taramps hd3000 to square wave signal generated input of mosfet driver, at the amplifier section i suspect that the comparator chip with dual output (c16 at the schematic) is damage due to emitting lot of heat , may main problem is i don't know if what is the part number. Sir do you know the part number of this chip or any replacement? thanks
Can you fix my audiopipe aqx 3000.1d amp... I bought like ten mosfets and one fda24n40f
What is the difference between the taramps HD 3000.1 and the MD 3000.1. I found them for the exact price so I need it for a single 12 sub what would be better. I appreciate if you can tell me.thanks
i personally didn't had any taramps amps but big D has some videos on HD and MD series.
MD
would u be interested in working on 2 of mine old school amp? do u have a email? the earthquake 50 cheater amp 1 Channel not working and same with the zapco amp cant Bridge in the channel as the left channel is not working..
what is model of this amp
If my taramps is cycling power, clip, and protect is it blown? I heard I can reset it by taking out of car and jumping power and ground? Is that correct?
No that's incorrect, sounds like its detecting a short in the output.
Hey hope all is well with you i was wondering if you probably know why my hd5000 taramp amplifier passing or leaking voltages on the out circut or should i say terminals?
What do you mean? All full bridge amplifiers have half rail DC voltage on both speaker terminals by default, this is how they work. It's normal.
Do you, or anyone else know if its possible to change the type of low and high pass crossovers? I have a Taramps smart 3, brand new. I waited a while before I installed it and as soon as I tried it I noticed I had a high pitch squeal coming from one of the fans as soon as the amp starts. It'll stop after a few min but nevertheless it's there.... and hella annoying 🙄! I can't return it because I exceeded the return period because I had to wait to install due to all the COVID19 BS. Then after tuning it I noticed that this amp does not like low bass notes... it is very annoying. It would be great if it weren't for that, ohh and worst of all some voice creeps through the filters somehow and that makes me want to smash it with a sledge hammer and stomp it like I was doing a Riverdance/B-walk/C-walk! Anyone that could help? Besides the obvious 🙄 of buying a different amp. I have other amps but one is 900wrms and other is supposedly 1kw. I am pushing 2 subs that can take up to 2kw each.
What is the correct value for IC comparator TL702c or TL712c?
TL072C
@@barevids sir TL072 is preamps what I mean sir ic driver for Si82xx at the middle there are 2 have 8pins each?
The number of ic Comparator driver for si82xxx
What cuase this user error or manufacturer
Awesome debugging skills. Can you please let me know how is the modulation done. What kind of device is used as modulator, a normal opamp with high GBP 15Mhz or some transconductance type opamp? Is it not the self oscillating circuit as even without the Fets being switched, you see drive signals? I'm mostly interested to know the devices close to the red preset inbetween the huge copper jumper and bulk capacitors
hi Sam, great video, got a couple of taramps MD8K with the same problems, turning on but no sound come out, how much you would charge me to repair it?
Are you in the UK
@@barevids unfortunately not.i am olanning to send direct from USA to your UK adress.if you agree of course.
@@basshead100 no sorry. The shipping is $350 round trip. There are loads of techs in the states that can sort it for ya.
My taramp just done the same thing this past weekend!
Very useful info as always :)
My taramps hd3000 turns on the subs make 5 popping sounds then the amp goes into protect.
That kinda sounds like rca problems either loose connection to the board of the amp or headunit idk I could be wrong
Have you repaired any soun digital amps?
A couple yea.
Im a newbie and trying to figure out how to do amplifier repair. Im completely lost at what you were explaining. Lool Do you really need an oscilloscope to double check the parameters on the components or can I just check using a multimeter in circuit? What do you use to turn the amp on at home?
What is the out rca jack for on the smart3?
Linking multiple amps.
Thank for your video very very helpful.....quick question is possible I can mail u an amp so u can fix it an ill pay you ....if is possible please let me know....I like to fix things but I don't have the full equipment an experience...honestly I think I found a new teacher....thanks an I will wait for ur reply....thanks
I always see you probing but where are you connecting the ground?
Scope shares a ground with bench supply negative. There is slight noise as a result but any time I need to read critical low voltage waveforms I attach a local ground clip.
Can you troubleshoot an amplifier with just a multi-meter?
Not really.
@@barevids Really?? Not even to just check and see if something was blown internally?
@@Mocredible you can use a multimeter to find dead fets and shorted drive transistors, open gate resistors etc. Amp Repair cannot be carried out without a multimeter. However without a scope you are risking the chance that you missed something and your new fets will blow the second you install them. Without a scope you also can't confirm integrity of the class D circuit once all new parts are fitted. It's possible to get an amp working again with MM only, but only if you are lucky, or already have years of experience with a scope to know what to look for without it.
@@barevids Damnn.. Im over here trying to take the most easiest route. Lol Thanks for the info though.
Hey Sam, I got two stetsom ex 10.5k's I'm tinkering with. One powers on and puts out signal except bass, soon as a bass note hits it goes protect. The other one is a little sketchy.. I'm at a loss with these Brazilians...lol
A need to no if my sound is cutting
Need help have a taramps 5k in protecive mood
Hey my taramp stop workin wat can it be
Damn u make me feel like I could fix these things
Excellent work,thank...
I've eagerly watched every video of yours I can get my hands on. Ive also search to try find a few books regarding class D operation and amplifier workings. Are there any books you can recommend for me to read? I need to know how the whole thing works and understand that that is a huge undertaking....lol
Further regarding oscilloscopes are there any relatively inexpensive ones that you would recommend?
the one i use was £150 used! I recommend Perrys repair guide from bcae1.com.
@@barevids thank you!!! I love your vids! I have learned a TON of info and usually need to watch them several times over to retain all the information you are giving!! Thank you again for the awesome vids!!!
@@barevids how much do u charge tofix a amp. It turns on but no soud from tha rca. Every thing looks good except the rca
Can you fix all my broken stuff please?
Hi i'm new here and really love what you do...I've got a soundstream XBP-10 that turns on and i'm getting no sound out of it,my sub blew along with my amp I've replace my sub and got the amp repaired but no one wants to repair my Bass machine just by looking at it but i want to have a go at it myself any kind of help will be greatly appreciated
Thank you, this video really helpful.. Sub 👍🏻
Hey bro what is your opinion on the taramps are they good
the Smart 3 is awesome :)
They quit working after I replaced them an 1 fan got caught on the power wire for the fan itself
Would you repair my amplifier?
@@blakecrutcher4965 if you're in the UK yes
Could you possibly look over a company called nemesis car audio..
I have a ? for you Sam.(barevids) Have you ever worked on an amp that the turn on lead would have a current draw without being triggered? I couldn't find and inbox to send this ? to you personally so I but it here.. Thanks for any help..
i didn't get the last word you said.
Is it just me or does these amp guts look different from other amps?
They look diffrent than most because they are fullbridged technology. Most Korean an china amps are half bridge designs so it requires alot more components.
Brazilian amps are usually full bridge. Few other companys also use it like kicker, jl, a couple amps from ds18 and audiopipe are using fullbridfed designs now. It's not new.
@@150db8 cool thanks
great job
Emf has a video of why brazillian fullbridge amps dont put out as much power in the lowerhz as his half bridged amps. Shady stuff. I hope you watch it and let us know what you think.
Awesome 😎
Can I send u my amp to fix lol it’s my gates they are burnt lol
Very good
Infinity kappa 4.
Speaker terminals shorted with supply ground .
2sc1015
2sc1018
MMMBT 5401
MMBT 5551
All SMD sot23
U is boss
taramps brasil
Funny, you just say to remove the gate resistors ha ha like we know how to do that ha ha
They're the resistors connected to the gates of the output mosfets lol kinda self explanatory