This definitely isn't a Midwest car. I had to take a sawzall to the line going into the power steering pump. This way I could put a 18mm socket on it. Even then it took all my strength break it loose. Never would have come off w a stubby. Also I used a 18mm crowsfoot to put that line back on until the very end. Then I used a stubby
+TERRORoftheLORD The part in this video fits your application, and the install should be the same or similar. Buy this part on 1AAuto.com: 1aau.to/m/Shop-TRQ
√ Watch the Video
√ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money
Thank you for posting this video and others like it… just replaced this line on my ‘04 and this video helped out a ton…
I love the surprise in his voice as he says "sometimes it just pops open." I get the feeling that's uncommon.
You guys made this seem so easy it definitely a pain in the rear especially the line that goes into the power steering pump🙄🙄
Thank you for the video! I will be going by this for doing my 2011 ford crown vic police interceptor
This crown vic seen better days
This definitely isn't a Midwest car. I had to take a sawzall to the line going into the power steering pump. This way I could put a 18mm socket on it. Even then it took all my strength break it loose. Never would have come off w a stubby. Also I used a 18mm crowsfoot to put that line back on until the very end. Then I used a stubby
5:00 remove belt, remove pump pully, grab a 11/16 wrench. Grind the 11/16 wrench front, back & sides for easy remove and install.
Thanks, good information,😁🤙,now I know where to look for a leak. And what the mechanic has to do. And to recheck the fluid and oil level.😉👍
Very video, thanks for posting ❤
Are the lines supposed to feel loose at the rack? My bolt is tightened and everything is lined up just both lines wiggle a bit in there.
I can do this! Thank you!
+stizan24 Thanks for watching our video! 1aau.to/m/Shop-TRQ
Need a video for the pump
Is this the same on a 2005 Ford Crown Victoria LX?
+TERRORoftheLORD The part in this video fits your application, and the install should be the same or similar. Buy this part on 1AAuto.com: 1aau.to/m/Shop-TRQ
which is the high pressure port on the rack or does it matter