Homemade Mini Lathe DIY Metal Lathe Machine Homemade Lathe Machine for Metal If you want to support the project - www.donational... #Lathe #LatheMachine #HomemadeLathe #DIY
I love this video series and your ingenuity. One piece of advice though. If you're going to use the VFD to slow your motor that rapidly, you need a braking resistor. They're pretty cheap and it'll keep from overheating your VFD.
Impressive drilling performance. When you want to use a larger drill, try drilling a pilot hole, with the diameter of the drill bit tip, first. It will greatly reduce the cutting pressure you have to produce with the tailstock and maybe will let you push a larger diameter
Bravo!👏👏 By far the best lathe-building series on You-tube! Your craftsmanship and ingenuity are truly amazing! I can't wait to see the completion of the series!
I love this video series and your ingenuity. One piece of advice though. If you're going to use the VFD to slow your motor that rapidly, you need a braking resistor. They're pretty cheap and it'll keep from overheating your VFD.
That machine cuts really great! Good job!
Thanks!
Impressive drilling performance. When you want to use a larger drill, try drilling a pilot hole, with the diameter of the drill bit tip, first. It will greatly reduce the cutting pressure you have to produce with the tailstock and maybe will let you push a larger diameter
Will have to try, thanks a lot
Its just a demonstration to show how much power it has, obviously someone who knows how to build a lathe from scratch knows how to drill properly....
Bravo!👏👏 By far the best lathe-building series on You-tube! Your craftsmanship and ingenuity are truly amazing! I can't wait to see the completion of the series!
Thank you very much!
Great video man, I've got a 3 phase 20 hp that would get you drilling, lol..
Put ca glue on the wood to harden
Thanks a lot for the good advice.
Great :) One question: have you found a choice, in inverter, to stop immeditelly the motor, as emergercy stop? Thanks in advance :)
Haven't found it yet, but if I find it I'll show it in the video
😍
Огонь хреначит.
Excellent job.
Thanks
Wow, what an amazing motor you have there
I love it too, thanks :)
👍👍👍👍👍👍👍
🤝
great! 🥳
Breathtaking lathe episodes
Thanks
Really great stuff. I’ve always wondered if some clever fellow could make a lathe using common railroad track. Now I know 😉
🤔👍👍
как нарезать резьбу спираль на токарном сделайте пожалуйста видео
Where are you?
На подходе)
@@firstchip4349 I've already seen new series)
Do you know that users on this channel are the same like another one?
Да, к сожалению, часть аудитории та же) Это как раз причина, по которой я не говорю на Первой Стружке об этом канале)
@@firstchip4349 Можно запретить просмотр этого канала пользователям из России.
Молодцы!
Спасибо