Cleaning the depressor/connection brass tip with a Q-Tip has saved me many times when I get atomizer error messages. Using alcohol also removes ALL oil off the surface.
I took my vape into the store where I bought it, they put the wrong coil in, I got the right coil it's working great now thank you for this very informative video it saved me from a bad anxiety filled day.
I had just changed out my coil and got the message. Too bad I had filled it up all the way with juice before I saw the error message. Had to dump out the oil and clean out the internal connectors like you said and that fixed it for me. Thanks a million!
Thanks bro...my vape fell down while charging and it was not working..I was planning to visit a repairing shop but I checked on TH-cam to get some clue and I found you...5 time clicking button worked and now i can enjoy my vape again✌️♥️....thank you
Thank you so much before you even say anything about taking the little tiny piece out and wiggling it out I started messing with it and it started to work so thank you
i cant get the whole thing off my vaperesso, i get the tank, and coil out, but the threaded rod is destroyed or something, because it keeps spinning around when i try to take it out. What can i do?
@andreashelledahle6718, in this case unfortunatley you might just have toi use pliers, to try and get a good grip on the bottom and apply outward pressure as you twist so it catches.
@@danhoff6890 okay thank you so much, its one of the older versions but it’s sad to lose it because of that you know:), I will try that today or tomorrow and see what happens👍
@@danhoff6890 Works for me! It's still going strong, haha. Thank you for the very informative video, btw! I might not need it now but eventually I'm sure I will
@muhammadriskialimaulana4477, so Temp to high, when you are running your mod can be a few things, the message is supposed to correctly work when the mod overheats and is running a dangerous level to the internal components of the mod,..it is a safety feature so you dont damage the mod from overusing it. however many times you can get this message in error, and you might have to switch the internal battery, the Coil, clean the mod connection ( to tank) or switch the tank itself, because the sensor is getting a faulty signal from one of those components. I hope this helps. If not call the manufacturer.
Faulty coil was the problem for me. If the mod was workin before the coil change then it’s probably the coil for everyone else who’s having similar issues
shouldve led with wiping ur contact pins as its a more widespread issue then in the chip or battery. sometimes the tanks just not making a good connection to the 510 pins and the pin needs to be lowered. this is especially true if ur plagued with ohms too low as well.
This helped so much turned out my coil wasn't turned correctly and didn't fall into the slot inside the tank twisted it into place and my z-tank works amazingly on my geekvape e100
When I get this message… twice now… it’s because something was just a tad too tight. I have a geek vape Zeus aegis. The coils go in the bottom of the tank and when you take that bottom part off- don’t tighten it all the way or it will throw you the “protection atomizer short” error.
I was in the same boat, I've been using disposables for over 6 months and my mod has been sitting (and leaking). Alot of cleaning and pushing the pin down to let it bounced back seems to be what worked best
Hello, im new into vaping and your video helped a lot ! you got a new subscirbe , i had to change the coil even tho it was new and just placed it , do you know why this happens ?
@Vasillis Anastansiadis, Hi Thank you for watching, and glad we could help. The most common reasons can be that the coil got hit with too much wattage too fast.... like a car ideally a coil needs to get broken in to heat up and cool down to heat up instantly again, With high watt devices when people first get a coil , they stage it where they start off using it at the minimal reccomended wattage then work their way higher every few inhales...this gets the vapor flowing and allows the tank gaskets to set in properly. Sometimes it can be as simple as a defective coil or in a more complex case that the wattage regulator in the mod is bad and shoots out more wattage than indicated.
First short atomizer message ever... Cleaned tank and everything, restarted device, changed coil (two new ones), the message is always there. Did all the gentle clicks&clucks you recommend on the mod and the tank (where they meet), but nada. And yes, the message appeared with one coil and remained after I replaced it, sounds like a mod issue right :( r.i.p?
@Hound Underground, yes seams like a connection issue inside the mod, probably within the chip circuitry, I would see if you can file a warranty claim with the manufacturer, other than that it wsounds like it can be sent off to its final resting place.
Great… I’m was the two tiny little screws at the base where you charge it up they became lose barley noticeable but there was some play so a quick tighten with a knife job done…
I have a fix....Use a seal (O'Ring or flat O'ring) off an old tank kit to put between mod and tank, they leak out the breather then under the tank in most mods, then into the 510 connection which causes problems and then into the inner casing which kills the mod....
for the it was the underside of the pod. it had a little screw what made connection to the actual vaping device, howerver, this screw was a little loose. I tightened this thing and was good to go
Voopoo Drag 2 with a Wasp Nano RDA has started firing but ohms drop from 0.25ohm to 0.1ohm. Cleaned everything tried new coil no joy. No error messages. Thinking of tearing down and cleaning next. Any ideas ?
@ Ah yeah good idea. I think my charger has a recalibration mode, discharge and recharge to test capacity and other things. I will try that first and report back. Thanks 🙏
@@danhoff6890 Yeah baby it was the batteries. You are a legend X. Two Sony VTC 5A’s that have always been paired together. My charger is an Opus BT-C3100 v2.2. I did a full “TEST MODE “ which discharges and checks capacity and it worked. They must have got out of sync or something. I do run them down not just topping up. I am doing a “REFRESH MODE” now which goes through 3 full discharge/recharge cycles and can take “10’s of hours or even days before complete” gulp 😳. Props to Sony and Voopoo safety though. Glad it was on a regulated mod and not my mech. Hope it helps someone. Thanks again 🙏❤️🙏
@@marylewis3311 Anytime, glad we could troubleshoot it together, I know that Voppoo has sophisticated software so sometimes, running thru the exercise will get you back in the game. cheers! and my pleasure
I have smok nord 4. The display is showing no atomizer constantly from past few days. No buttons are working. The display is stuck at No Atomizer message. Even when the pod is not connected. Waiting for the battery to drain so that the display goes away. Is there a way to do hard reset? It has fixed battery
@Rahulsinha9031 - I dont know of a hard reset for that model. Probably best to let the battery drain as you thought and see if it resets the frozen Screen.
I got this problem my vape was fine I changed the coil let it sit for about 20 minutes then was vaping away for about an hour or 2 then all of a sudden I got this problem could I have a faulty coil ?
@nightfury1348, yes it could be a faulty coil, also it is best to stage the coil where you kind of break it in before hitting it with any high wattage because then it prolongs the life of the coil... also in rare cases the mode may be exerting more power than it displays.
@@danhoff6890 it’s all good thank you for your help I changed they coil and it’s back working fine now thank you for your help and taking your time to respond
Thanks man! my spring pin wasnt connecting properly. I just pushed and moved it a little bit and bam! works! still going to replace it since my mod is a couple years old but this will do!
I just got a new vape mod geek mod S100 I clean the tank then primed coil before vaping got short automizer signal with new battery.still can't set up.please help me get it vaping again
I am using Cigpet Capo Mod.Just now I change my coil and do all the steps. But my mod says "!SHORTED" after fire testing 1st time. How do I fix my "!SHORTED" problem? 😮💨😔
@jadentual, for this one it sounds like a circuitry problem with the mod, if you did all the steps I. This video in addition to changing the coil… clean connection area, check the cart pin connection. I would contact the manufacturer.
I have a Voopoo Doric and I can't take my Doric apart so I cleaned it the best that I could and changed my coil and still nothing oh also I've changed my coil 3 xs and the first 2 coils somehow got broke because I have another tank and tried them in that one and they aren't working so whatever my problem is it's breaking my coils as well so do you have any ideas on what this could be I've even used the pod from my other atomizer and I know its my tank because my other pod that's the same as the one that the Doric has on it isn't working on my Doric either . Please help
@Kim Baum, it sounds like you have a pretty complex case but you did everything for that Mod to get it running, i think it has a problem with the wattage regulator and it is frying your coils by letting too much thru and masically ruining everything you have on there, I have seen batteries you have turned down to 2 or 3 watts and you hook it up to a Watt tester and it is pumping out 40 watts. Basically if thats happening you have to call the manufacturer or the shop that sold it to you to see if they can swap it or take it apart and replace the circuit board.
i just bought new coil and i got this message check atomizer i tried everything even change atomizer and i had melted coil and she was working but new doesnt wtf ?
@arrowDeath_tv, the mod might be outputting higher voltage Than it is indicating and burning thru the coils. I would contact the battery manufacturer. I have seen this happen.
@princeNinoCabug-It5bw, so in the video I talk about determining if the issue is in the battery or the tank. if you try a different tank and it still is an issue the connector in your mode could be either dirty or not making contact with the tank pin. If you clean this area and still nothing you should call the battery manufacturer and see if they will swap it for you. Hope it helps.
geek vape error 'atomizer short'. so far there has been no way to fix it. i already tried all the stuff youre banging on about, ie you havent told us anything that i hadnt already worked out via plain old logic .... lol .... any other suggestions?
@YobboCat, yea the plain logic is all I got lol, if that doesnt work get in touch with the store or the manufacturer and poke at them as it comes down to the specific programing of the device as this is probably an internal error on the motherboard. Rarely if you take the casing of the device apart, you can see the wire going up to the connector detached where the soldering failed giving you that signal.
my batterys a bit fucked so it only really works above like 50 percent but i got the drag for free so i cant complain, this video was entertaining while watching the ecig charge
@user-Jay-C, well thank you for watching! if your unit has a replaceable 18650 battery if you swap it, should be good as new. If it has a built in battery component then just enjoy it as it is. You cant beat FREE, lol!
I have got an argus pod. Was using it since a year. Had stopped using it for a couple of months and now when I tried to use it, it shows check atomizer. I was using an older coil so maybe it is a coil issue. Anyone got any idea?
Nah. See none of that worked and to get to the point of taking it apart is not realistic because every thing I've ever taken apart turns to garbage right away. Just throw it away and go buy a new one - like they're cheap or I'm super rich and it doesn't financially phase me.
So I have a problem with someone who might be able to help me. I replaced my coil twice, and from time to time, I get an air hit. I've tried clearing the puff counter, and that didn't help. I have a morph3 using 0.4 ohm coils Thanks in advance
@user-gz7oc9bz6c, so if the lights come on and the counter starts and the hit is dry it sounds like a contact issue, the contact issue can be you need to clean where the coil goes into the tank base good and make sure the connection points are solid, or you need the check where the tank screws into the battery to make sure the tank lower 510 contact and the battery are clean and making a good connection. If you take your tank and use it with a buddies battery and it works flawlessly you know you have to check the battery you have, however if it is the same issue with another battery you know if is within the tank contact. Hope it helps Cheers.
Thanks. I can't drive right now due to medical issue. The only vape shop close to me only sells these and VooPoo. All are crap. I have several broken ones here. I knew that it's something stupid with all of them that can fixed. The Aegis X is possibly one of the worst cases of bad engineering that I have ever seen
@Marino Nikic, if you tried everything in the video, even took it apart to check for contact issues and it still shows, you need to contact the manufacrturer as the actual circutry / microchip in there is damaged.
@youtubecommenter2527, never seen that one before, but could be that it is running too hot and the unit needs time to cool down before you can hit it againl.
I js used my ps4 controller n smacked it on my kodo pro battery and it works perfectly at first it said shorted and after i smacked it twice it said no atomizer n i connected my cart n it worked after
@Alex maine, check the bottom connector pin in the mod battery and & the Kylin, and make sure when you screw them in they are touching. Most of the time your symtoms are caused by a recessed connector pin ewither in the mod or tank. Cheers and hope it helps./
@@danhoff6890 So i solved the problem, problem was that pin is too short to touch the connector, so i decided to put a small steel piece between connector and pin, then it worked now my drag recongizes it.
I found after heavy inspection that my coil was not touching my atomizer base, so I have to use a Piler and forced it to close shut. Problem solved and MY DRAG MINI survived.
I was getting "atomizer low" on my e-cig... after i changed to a new coil and let it sit/soak up the liquid for 30 minutes. I'd never seen that before.... it's been 12 years since i switched to this and i've never seen that. I spend an hour looking through crap, find a YT vid, first thing he says is to reboot the stick like a pc and i was like shit i hadn't tried turning it off.... i go in the bathroom where i left it, hit the button 1/5 times to turn it off and heard it actually work..... of COURSE.... hadn't done a thing it just decides to stop screwing up.
I had the same error. After I tried everything suggested in 2 videos I watched I put back the old coil I just took out and all was good. So I determined it was the new coil. I got another new coil and all was good again. Thanks God 😅
You don't even understand how much of a headache you just took away from me. Thank you Sir!!!!!
@Clay Sutton, appreciate the kind words! and thank you for watching! glad to help.
Just wasted £80 of DMT 🥲
I've had this problem on and off for 2 years and today you helped solving it. Thank you for getting me out of my misery. 😭
@Meknassih, very glad we could help you! thank you for watching.
Cleaning the depressor/connection brass tip with a Q-Tip has saved me many times when I get atomizer error messages. Using alcohol also removes ALL oil off the surface.
@JeanLeite-d1e, Amazing! yes Alcohol is the go-to for sure when cleaning vape components.
Watch in 1.25x speed and it's a bit of a better watch 😂
Oh thank you man it's way much better 😂
Q-tips worked! Even if you don't visibly see dirt or grime surrounding your connection, I'd recommend still using the Q-tips for a nice clean-up.
@ComradeZBunch, yes that is very true.
Voopoo Argus user, here! Thanks for this info! My spring pin was stuck down! 🙌
@Onyx Crystal,. Glad to help! thank you for watching, yes Voopoos are notorious for this happening after lots of use/ cheers.
I had a same issue and I changed the coil and it’s fixed
I took my vape into the store where I bought it, they put the wrong coil in, I got the right coil it's working great now thank you for this very informative video it saved me from a bad anxiety filled day.
@sherrykington2613, that awesome very glad we could help!!
I had just changed out my coil and got the message. Too bad I had filled it up all the way with juice before I saw the error message. Had to dump out the oil and clean out the internal connectors like you said and that fixed it for me. Thanks a million!
@robbiesvids1069, glad we could help! Cheers and thx for watching.
Had this issue hence being here, simple wipe of the tank and inside the actual vape (underneith) and back to vaping! thanks man.
@ryankelly5524, glad we could help get you up and running again! Cheers.
I pried the pin and it fixed the ''no vaporizer '' error on my caliburn. Thank you so much ;- )
@bloodcanadian, Awesome! very glad we could help!
Love it! It’s always been the coil change for me and then work backwards. 9/10 it’s the bloody coil or a good ole clean
Thanks bro...my vape fell down while charging and it was not working..I was planning to visit a repairing shop but I checked on TH-cam to get some clue and I found you...5 time clicking button worked and now i can enjoy my vape again✌️♥️....thank you
@Somraj634, our pleasure! Very glad we could help you fix your problem!
You thank you
You the dog Boss
I cleaned the connection like you recommended and the No Atomizer Check Atomizer message gone. Boss you saved me $50
@B Doon, awesome, very glad to help! cheers and thanks for watchihg.
Ty I had to restart now working
@gwenannblondie1, Awesome! glad to hear it worked!
I followed your instructions and my vape is working 💯 thank you
@leratokomako8970, Really glad to hear we could help! thank you for watching!
Thanks dude. It was the trip that resolved the problem
@Jeff-tv2qs, Awesome, glad we could help!
BROOOO THANK U!!! I did all the steps and the last one worked!!!! Thank u!!!!!
@jujulacora, Very glad I could help! cheers and thx for watching!
Thank you so much before you even say anything about taking the little tiny piece out and wiggling it out I started messing with it and it started to work so thank you
@SageAmethysst, really glad we could help! thank you for watching!
Thank you!
@redrum, our pleasure, thank you for watching!
i cant get the whole thing off my vaperesso, i get the tank, and coil out, but the threaded rod is destroyed or something, because it keeps spinning around when i try to take it out. What can i do?
@andreashelledahle6718, in this case unfortunatley you might just have toi use pliers, to try and get a good grip on the bottom and apply outward pressure as you twist so it catches.
@@danhoff6890 okay thank you so much, its one of the older versions but it’s sad to lose it because of that you know:), I will try that today or tomorrow and see what happens👍
@@andreashelledahle6718 Sounds good, fingers crossed for you!
thanks mate!! have had the message for days.. wish i knew it was as simple as changing your coil haha, Subscribed
@DDUBS GAMING, my pleasure, very glad we could help!!
Thanks sir fixed
@Sasaif1919rash, Awesome!, Glad we could help
Wtf I restarted the vape, it still didn't work and then I 'accidentally' dropped it and now it works like a charm lmao
@e'rekt Zorah, looks like it was an internal contact issue, that fixed itself on impact. Thx for watching.
@@danhoff6890 Works for me! It's still going strong, haha. Thank you for the very informative video, btw! I might not need it now but eventually I'm sure I will
@@fragrooster375 My Pleasure and glad to help! I did that with a computer once and it is still going too 2 years later.
@@danhoff6890 Amazing how that works haha. Even more comprehensible and turning it off and on :D
This has happened to me a lot! I fixed a pond pump once by slamming it on a rock! It started pumping water😉
How do I fix oxvn when the temperature is high, bro 🙏
@muhammadriskialimaulana4477, so Temp to high, when you are running your mod can be a few things, the message is supposed to correctly work when the mod overheats and is running a dangerous level to the internal components of the mod,..it is a safety feature so you dont damage the mod from overusing it. however many times you can get this message in error, and you might have to switch the internal battery, the Coil, clean the mod connection ( to tank) or switch the tank itself, because the sensor is getting a faulty signal from one of those components. I hope this helps. If not call the manufacturer.
Faulty coil was the problem for me. If the mod was workin before the coil change then it’s probably the coil for everyone else who’s having similar issues
Changed my coil too that was the issue
shouldve led with wiping ur contact pins as its a more widespread issue then in the chip or battery.
sometimes the tanks just not making a good connection to the 510 pins and the pin needs to be lowered.
this is especially true if ur plagued with ohms too low as well.
@Azra Sashima, great suggestions!! thank you for watching.
Your video helped me a lot thank you ☺️
@bunny_ricklee, Glad we could help! thank you for watching.
Thanks this video sorted my problem had it working in 5 mins thanks
@adammcauley421, Awesome! glad we could help!
I did what you said and changed the coil and it worked like a charm. Thank you 🎉
@Richard C, very glad we could help resolve the issue! cheers! & thx for watching.
This helped so much turned out my coil wasn't turned correctly and didn't fall into the slot inside the tank twisted it into place and my z-tank works amazingly on my geekvape e100
@maryjane126985, thats Awesome, we are very glad the video got your unit running like a champ! awesome combo byt the way for big clouds! Cheers.
This video is very helpful!! Thank you!! New subscriber here🎉
@Deana Brown, So glad we could help! and thank you for watching 🙂
When I get this message… twice now… it’s because something was just a tad too tight. I have a geek vape Zeus aegis. The coils go in the bottom of the tank and when you take that bottom part off- don’t tighten it all the way or it will throw you the “protection atomizer short” error.
Thanks man fixed it with ur help 🙏 👍 😊
@Mrorano, appreciate the kind words! glad the video helped resolve the issue! cheers,
Thanks my mod works again 😁
@elliedean2431, Glad to help, thank you for watching!
You fixed my vape. Thanks! Faulty coil😂
@Lizanicole8410, Awesome! Glad we could help!
I just laughed my ass off but I can't believe he was about to put that battery in wrong that would have fried the whole mod😊 thanks for the video
thank you you helped a lot😁❤️
@usernnaammee Password, glad to help! thank you for watching!
Thanks bro.. had a mod sitting for a long period of time. Used isopropyl and pressed and cleaned all the pins where the tank goes! Works like a charm
@kyle mynes, thats awesome! super glad the video could help you get running again and thak you for watching!
I was in the same boat, I've been using disposables for over 6 months and my mod has been sitting (and leaking). Alot of cleaning and pushing the pin down to let it bounced back seems to be what worked best
Hello, im new into vaping and your video helped a lot ! you got a new subscirbe , i had to change the coil even tho it was new and just placed it , do you know why this happens ?
@Vasillis Anastansiadis, Hi Thank you for watching, and glad we could help. The most common reasons can be that the coil got hit with too much wattage too fast.... like a car ideally a coil needs to get broken in to heat up and cool down to heat up instantly again, With high watt devices when people first get a coil , they stage it where they start off using it at the minimal reccomended wattage then work their way higher every few inhales...this gets the vapor flowing and allows the tank gaskets to set in properly. Sometimes it can be as simple as a defective coil or in a more complex case that the wattage regulator in the mod is bad and shoots out more wattage than indicated.
Thank you so much your video was helpful for me 😊
@Sameer Shaikh, very glad to help, and thank you for watching.
Thanks dude. It was when I did my coil change. It wasn't screw on properly lol. U Rock!
@Misty Hi, Glad the video Helped! thank you so much for watching.
you've been very helpful, thanks
@Rabia Marashdeh, anytime, glad to help.
Thanx bud.
Helped alot
Great vid
@Rudy Maritz, very glad to help and thank you for watching+ the kind words! cheers.
Thank you 🤩😍 This helped me a lot
@MAGEDOK, Glad we were able to Help.
lifesaver video for smokers
@maxime holtzinger, appreciate it! thank you for watching.
First short atomizer message ever... Cleaned tank and everything, restarted device, changed coil (two new ones), the message is always there. Did all the gentle clicks&clucks you recommend on the mod and the tank (where they meet), but nada. And yes, the message appeared with one coil and remained after I replaced it, sounds like a mod issue right :( r.i.p?
@Hound Underground, yes seams like a connection issue inside the mod, probably within the chip circuitry, I would see if you can file a warranty claim with the manufacturer, other than that it wsounds like it can be sent off to its final resting place.
Great… I’m was the two tiny little screws at the base where you charge it up they became lose barley noticeable but there was some play so a quick tighten with a knife job done…
@Oak Ash Thorn, thats awesome, glad it helped and thank you for watching!
I have a fix....Use a seal (O'Ring or flat O'ring) off an old tank kit to put between mod and tank, they leak out the breather then under the tank in most mods, then into the 510 connection which causes problems and then into the inner casing which kills the mod....
@Namdor2012, thats a fantastic tip.
What do you call that in your atomizer? what brand?
@markperante4115, the tanks I use in the video are made by our brand HoneyStick,
Fired after cleaning the connectors🤝🏻
I just had to take the battery out thank you didn’t know it even came out till u said that
@Seth Janssen, Glad the video helped get your vape back in the game! thank you for watching.
Thanks it was my battery luckily my pod mod has replaceable batteries.
Cemetery665_TOAO very glad we can help, and with external batteries this is the most common issue.
@@danhoff6890 My old battery also started working after I stopped using for awhile so everything is good.
@@cemetery895 Perfect, do you are back in business :-)
Thanks, I pressed the pin as you suggested and it works. Thanks bro!
@Robbie Orbit, Glad to help! thx for watching.
Thank you 🥰
@jodyspower8565, glad to help! thank you for watching!
what is the problem with my vape when I checked the atomizer?
Very helpful. Thanks for the information!
@Fernanda Merino., My Pleasure and thank you for watching!
hi i have tesla cigar punk 86w and none of those worked is there any thine other i could do
Thanks bro, u save my life hehe
for the it was the underside of the pod. it had a little screw what made connection to the actual vaping device, howerver, this screw was a little loose. I tightened this thing and was good to go
Voopoo Drag 2 with a Wasp Nano RDA has started firing but ohms drop from 0.25ohm to 0.1ohm. Cleaned everything tried new coil no joy. No error messages. Thinking of tearing down and cleaning next. Any ideas ?
@marylewis3311, Full Teardown and cleaning / reassembly is probably a good idea. if that doesnt work its the battery/
@ Ah yeah good idea. I think my charger has a recalibration mode, discharge and recharge to test capacity and other things. I will try that first and report back. Thanks 🙏
@@danhoff6890 Yeah baby it was the batteries. You are a legend X. Two Sony VTC 5A’s that have always been paired together. My charger is an Opus BT-C3100 v2.2. I did a full “TEST MODE “ which discharges and checks capacity and it worked. They must have got out of sync or something. I do run them down not just topping up. I am doing a “REFRESH MODE” now which goes through 3 full discharge/recharge cycles and can take “10’s of hours or even days before complete” gulp 😳. Props to Sony and Voopoo safety though. Glad it was on a regulated mod and not my mech. Hope it helps someone. Thanks again 🙏❤️🙏
@@marylewis3311 Anytime, glad we could troubleshoot it together, I know that Voppoo has sophisticated software so sometimes, running thru the exercise will get you back in the game. cheers! and my pleasure
thank you so much!!
@Teletubis, Glad we can help! Thank you for watching.!
I have smok nord 4. The display is showing no atomizer constantly from past few days. No buttons are working. The display is stuck at No Atomizer message. Even when the pod is not connected. Waiting for the battery to drain so that the display goes away. Is there a way to do hard reset? It has fixed battery
@Rahulsinha9031 - I dont know of a hard reset for that model. Probably best to let the battery drain as you thought and see if it resets the frozen Screen.
i need a vape with the coils where u put cotton in them where do i buh for like 30 dollars?
@Noah, are you looking for a dripper mod / RDA? if so, there is several places online that close them out.
I got this problem my vape was fine I changed the coil let it sit for about 20 minutes then was vaping away for about an hour or 2 then all of a sudden I got this problem could I have a faulty coil ?
@nightfury1348, yes it could be a faulty coil, also it is best to stage the coil where you kind of break it in before hitting it with any high wattage because then it prolongs the life of the coil... also in rare cases the mode may be exerting more power than it displays.
@@danhoff6890 it’s all good thank you for your help I changed they coil and it’s back working fine now thank you for your help and taking your time to respond
@@nightfury1348 Sure thing, Anytime! glad its all good now. Cheers.
Thank u so much u help me a lot
@olixia podsiadlo, my pleasure! and thank you for watching.
Thanks man! my spring pin wasnt connecting properly. I just pushed and moved it a little bit and bam! works! still going to replace it since my mod is a couple years old but this will do!
@Phantom_Cards, really glad I was able to help! thank you for watching!
Are you able to get add revenue for this video or is it demonetized and or rated as 18+?
I just got a new vape mod geek mod S100 I clean the tank then primed coil before vaping got short automizer signal with new battery.still can't set up.please help me get it vaping again
I have the fix, don’t buy Geekvape products
Just bought a vape and already have this problem…. It is brand new
I am using Cigpet Capo Mod.Just now I change my coil and do all the steps. But my mod says "!SHORTED" after fire testing 1st time. How do I fix my "!SHORTED" problem? 😮💨😔
@jadentual, for this one it sounds like a circuitry problem with the mod, if you did all the steps I. This video in addition to changing the coil… clean connection area, check the cart pin connection. I would contact the manufacturer.
Screw in the bottom coil before the top spent 20 min to find out the order matters
O meu veper só ficará check- atomizer, oque eu faço?
I found the problem, it was a dirty coil. Thank you for this video.
@1matsg, awesome! glad we could help!
I have a Voopoo Doric and I can't take my Doric apart so I cleaned it the best that I could and changed my coil and still nothing oh also I've changed my coil 3 xs and the first 2 coils somehow got broke because I have another tank and tried them in that one and they aren't working so whatever my problem is it's breaking my coils as well so do you have any ideas on what this could be I've even used the pod from my other atomizer and I know its my tank because my other pod that's the same as the one that the Doric has on it isn't working on my Doric either . Please help
@Kim Baum, it sounds like you have a pretty complex case but you did everything for that Mod to get it running, i think it has a problem with the wattage regulator and it is frying your coils by letting too much thru and masically ruining everything you have on there, I have seen batteries you have turned down to 2 or 3 watts and you hook it up to a Watt tester and it is pumping out 40 watts. Basically if thats happening you have to call the manufacturer or the shop that sold it to you to see if they can swap it or take it apart and replace the circuit board.
@@danhoff6890 thanks for the feedback I appreciate it so much Thank you
@@KimBaum-l1c Anytime! Cheers, and thank you for watching.
My 510 connections spring is not going up far enough and i cant fix it
@rhydengan348, if you cannot put a little spacer in there, then you should call the manufacturer to see if they can help you.
how do i do, pls. help my vape just say battery low! my battery brand new why, and when i open we just say" it short"?😓
@alleypog, does your mod have replaceable 18650 bateries or is it a "built -in-battery" ?
i just bought new coil and i got this message check atomizer i tried everything even change atomizer and i had melted coil and she was working but new doesnt wtf ?
@arrowDeath_tv, the mod might be outputting higher voltage Than it is indicating and burning thru the coils. I would contact the battery manufacturer. I have seen this happen.
still no coil even in new atomizer ,how to fix
@princeNinoCabug-It5bw, so in the video I talk about determining if the issue is in the battery or the tank. if you try a different tank and it still is an issue the connector in your mode could be either dirty or not making contact with the tank pin. If you clean this area and still nothing you should call the battery manufacturer and see if they will swap it for you. Hope it helps.
geek vape error 'atomizer short'. so far there has been no way to fix it. i already tried all the stuff youre banging on about, ie you havent told us anything that i hadnt already worked out via plain old logic .... lol .... any other suggestions?
@YobboCat, yea the plain logic is all I got lol, if that doesnt work get in touch with the store or the manufacturer and poke at them as it comes down to the specific programing of the device as this is probably an internal error on the motherboard. Rarely if you take the casing of the device apart, you can see the wire going up to the connector detached where the soldering failed giving you that signal.
i have find something i remove all the screw , clean & that's it zeus x mesh problem short or no coil now fixed
@Visual Deep Mix. great suggestion!. E juice residue must have gotten into your Mod.
@@danhoff6890 it do that a lot of time zeus are the best but sometimes still boring
😅
@@danhoff6890 For my liquid i use only 20 pg 80 vg
@@visualdeepmix4960 Well that is thicker juice so i can see how it would need to be cleaned more often.
@@danhoff6890 ok thanks for your answer
Still does not work I have hade this problem now for 3 days i have changed the battery,coil and cleaned it still get the Message
@serectos, if you tried that and still getting issues it must be the base of the tank has a contact or electronic issue.
Soooooo I ended up taking wire cutters and tightening the tank to the mod so the connectors touch. It worked. 😅
@missurbanxplorer, thats awesome!!
my batterys a bit fucked so it only really works above like 50 percent but i got the drag for free so i cant complain, this video was entertaining while watching the ecig charge
@user-Jay-C, well thank you for watching! if your unit has a replaceable 18650 battery if you swap it, should be good as new. If it has a built in battery component then just enjoy it as it is. You cant beat FREE, lol!
I have got an argus pod. Was using it since a year. Had stopped using it for a couple of months and now when I tried to use it, it shows check atomizer. I was using an older coil so maybe it is a coil issue. Anyone got any idea?
@Seasonpathak7000, most common is a coil replacement or cleaning the connection area in most cases.
Nah. See none of that worked and to get to the point of taking it apart is not realistic because every thing I've ever taken apart turns to garbage right away. Just throw it away and go buy a new one - like they're cheap or I'm super rich and it doesn't financially phase me.
I just dont want to waste the 120$ I put into it 💀
So I have a problem with someone who might be able to help me. I replaced my coil twice, and from time to time, I get an air hit. I've tried clearing the puff counter, and that didn't help. I have a morph3 using 0.4 ohm coils
Thanks in advance
@user-gz7oc9bz6c, so if the lights come on and the counter starts and the hit is dry it sounds like a contact issue, the contact issue can be you need to clean where the coil goes into the tank base good and make sure the connection points are solid, or you need the check where the tank screws into the battery to make sure the tank lower 510 contact and the battery are clean and making a good connection. If you take your tank and use it with a buddies battery and it works flawlessly you know you have to check the battery you have, however if it is the same issue with another battery you know if is within the tank contact. Hope it helps Cheers.
Thanks. I can't drive right now due to medical issue. The only vape shop close to me only sells these and VooPoo. All are crap. I have several broken ones here. I knew that it's something stupid with all of them that can fixed. The Aegis X is possibly one of the worst cases of bad engineering that I have ever seen
@Kattz, Aegis from Geekvape is notorious for connection issues for sure, I personally have had so many of them.
you=shill
@@danhoff6890
my rta fires 10times then just saying ”check atomizer” what i need to do i tight screws
@mikkakoskinen366, you might be giving it too much power, or when you give it power the Screws and wire go out of place and make a contact issue.
@@danhoff6890 i do new build and still not working
Can u help.me it says no amotizer and ive tried evrything took it all out and put back the same way and nothing happens
@Marino Nikic, if you tried everything in the video, even took it apart to check for contact issues and it still shows, you need to contact the manufacrturer as the actual circutry / microchip in there is damaged.
NO ATOMIZER HOW TO BYE THIS IN DOHA QATAR CAN YOU HELP ME PLZZZ
Smok Nord 5 atomizer short, how to fix guys
🚨 Q tip and alcohol……nice 🚨
What is High Atomizer?
@youtubecommenter2527, never seen that one before, but could be that it is running too hot and the unit needs time to cool down before you can hit it againl.
you are a goddamn Genius
I js used my ps4 controller n smacked it on my kodo pro battery and it works perfectly at first it said shorted and after i smacked it twice it said no atomizer n i connected my cart n it worked after
@14K_vibes00, same thing with my computer monitor lol, amazing what the old smack twice can fix.
My drag 1 doesn't recognize Kylin Mpro RTA, but it recognizes Reload s( maybe kylin mpro too big)
@Alex maine, check the bottom connector pin in the mod battery and & the Kylin, and make sure when you screw them in they are touching. Most of the time your symtoms are caused by a recessed connector pin ewither in the mod or tank. Cheers and hope it helps./
@@danhoff6890 So i solved the problem, problem was that pin is too short to touch the connector, so i decided to put a small steel piece between connector and pin, then it worked now my drag recongizes it.
@@alexmaine2922 Awesome! Glad that worked, I figured the issue had to be there based on the symptoms, thank you for watching!
I found after heavy inspection that my coil was not touching my atomizer base, so I have to use a Piler and forced it to close shut. Problem solved and MY DRAG MINI survived.
@MegaRockfever, glad you are up and running again!
I was getting "atomizer low" on my e-cig... after i changed to a new coil and let it sit/soak up the liquid for 30 minutes. I'd never seen that before.... it's been 12 years since i switched to this and i've never seen that. I spend an hour looking through crap, find a YT vid, first thing he says is to reboot the stick like a pc and i was like shit i hadn't tried turning it off.... i go in the bathroom where i left it, hit the button 1/5 times to turn it off and heard it actually work..... of COURSE.... hadn't done a thing it just decides to stop screwing up.
@Ahzhrei2000, thats great very glad we could help, with electronics sometimes they need to be reset as you get a bug in the programming.
I had the same error. After I tried everything suggested in 2 videos I watched I put back the old coil I just took out and all was good. So I determined it was the new coil. I got another new coil and all was good again. Thanks God 😅
@felypc7325. great to hear that you were able to fix it after some trial and error. ! thx for watching.