Ok I got a reply from Ricky The details are a bit light on this engine build But I can tell I’ve got Forged rods 77 mm crank Lightweight flywheel with a Tilton twin plate 1300 cc injectors Forged pistons Ferrera 6000 oversized valves Ported Chambered Reversion exh manifold 60 mm throttle body PAC racing titanium retainers Kelford springs TRD DLC coated shimless bucket Billet cam blocks Borg Warner 62/58 On e85 3 fuel pumps 3 inch open exhaust Evo 8 intercooler with spray bar And I used to make 272 at the wheels Now on Link Extreme so next run will be close to 285 at 18 psi This 399 hp at the wheels will have to some trick engine O yeah my block is filled with Embarco Stuff they use at the NASA launch pad for concrete repairs Some details on Ricky s build would be useful To all us low hp people
SURE, I CAN TELL YOU THAT THAT ENGINE WAS RACING FOR 3 CONSECUTIVE YEARS. THEN THE OWNER CHANGED TO A TOYOTA TWIN CAM 1.6 LITER (4AGE) ENGINE IN LOOKING TO GAIN MORE HP
Hi brother will you please tell me which turbo is good for Gypsy 1.3 mpfi i want to turbo my gypsy also i am confuse about turbo please tell me brother if i use 2.4 cc Engine,s turbo like of mahindra that or Mahindra scorpio of tata safari 2.2 turbo please please reply 🙏🏻🙏🏻
Hello,I have seen your engine on the dyno.....very good.I want to install a turbo on my suzuki engine G13B (sohc) for off road race in my country(Belgium).Where can I buy a camshaft for turbo......and wich turbo do you use? thank you very much...John.
@@jayrajkhanna3896 it will...but turbos boost pressure in the engine, so unless you are ready to spend some decent cash and upgrade all the stock internals to performance ones,you shouldn't expect to increase or even retaining the original mileage
@@jayrajkhanna3896 I recommend you to look up turbocharging on TeamBHP forum you'll get answers to all your questions..in short there are many more steps before turbocharging,like parts uograde, ecu remaps, and many steps after turbocharging,like tyres upgrade, suspension upgrade and many more. So while all this turbocharging sounds fun , expect to spend 4-5 Lakhs for this level of performance
Ok 400 hp For how long Unless your on E85 or Meth With 1100 cc inj a massive fuel system 3 inch open exh etc I should know I make 272 whp from a G13 b Suzuki I’ve seen dyno figures all over the internet Some I just don’t believe Better jam an air filter on that sucker or she’ll suck in some plastic bag if the street s
im pretty sure its he's probably running a 1.3L G13A or G13B block with a 1.6L head. depending on the block, those heads have bigger valves and flow overall. im sure he opened up the exhaust ports for that snail he's running too. not hard to get was he has.
Nah dude, 1.6 Vit ( G16A / G16B ) & 1.3 Sierra / Samurai (G13BA / G13A / G13B) all have different injector placement unless this was a custom block. Just watching this thing in action i know for sure that aint a 1.3 or a 1.6 Way to quick even with turbo.
One of the best video I have ever came across on Indian motor TH-cam channel..
What do you mean Indian motor ?
It’s not Indian
400hp from 1.3L engine ! GREAT👌✌️
Ok
I got a reply from Ricky
The details are a bit light on this engine build
But I can tell I’ve got
Forged rods
77 mm crank
Lightweight flywheel with a Tilton twin plate
1300 cc injectors
Forged pistons
Ferrera 6000 oversized valves
Ported
Chambered
Reversion exh manifold
60 mm throttle body
PAC racing titanium retainers
Kelford springs
TRD DLC coated shimless bucket
Billet cam blocks
Borg Warner 62/58
On e85
3 fuel pumps
3 inch open exhaust
Evo 8 intercooler with spray bar
And I used to make 272 at the wheels
Now on Link Extreme so next run will be close to 285 at 18 psi
This 399 hp at the wheels will have to some trick engine
O yeah my block is filled with Embarco
Stuff they use at the NASA launch pad for concrete repairs
Some details on Ricky s build would be useful
To all us low hp people
well i like to know how long this engine will run with that 400hp
SURE, I CAN TELL YOU THAT THAT ENGINE WAS RACING FOR 3 CONSECUTIVE YEARS. THEN THE OWNER CHANGED TO A TOYOTA TWIN CAM 1.6 LITER (4AGE) ENGINE IN LOOKING TO GAIN MORE HP
What ecu, injector and turbo?
Does has stock vitara piston and forge con rod ?
Awesome 👌
Awesome engine sound
which turbo did you put?
which vehicle's ?
Tengo un Suzuki j20a quiero aserle unas modificaciones, donde están ubicados
Holly shit 400 hp hell yeah
Nice bro humming sound of turbo👍
Which turbo was used ? Size / model ?
The real question is what head gasket is he using
engine specs please???
hi i have a 1.3 l 2nz fe corolla am a aa turbo enthusiast what mods do i need to turbo it ?
What Engine is this and what internals ?
We need a tutorial or walk through
Tiene pistones forjados el motor
Hector Barraza tiene original suzuki
Gracias yamil
@@yamilracingvideo y soporta las 40 Lbs del turbo, sin forjar bielas y pistones?
Que relación usan para correr en 100 mts
Ths is what i dream to build
Remember kids...
Lights on for safety 💡💡
Hey, i wanna build a G13BB swift turbo. I wanna get in touch with you guys. Need help
And the 4x4 works?
Luis Villamil yes sir
where is this garage bro
what's the name of the song???
Is this manual gear or automatic gear?
ALQ35 manual gear
Cuando una carrerita mano te estoy esperando soy valiente un suzuki samurai vs toyota tercel de 16 varvulas mas turbo
Motor de que carro es?
Luis Fernando Perez bloque 1.3L (g13) original suzuki samurai con tapa 16 válvulas de suzuki vitara (1994)
Cuantas libras del turbo aguanta? Un saludo desde méxico 🤙🏼
Luis Fernando Perez normalmente le dabamos con 40 lbs
40? Una bestia, tengo un Suzuki y quiero ponerle turbo, pero en méxico no es común, ustedes donde consiguen piezas?
Cúantas RPM sube
Those motor mounts are begging for help
Song track pleaz ?
Hi brother will you please tell me which turbo is good for Gypsy 1.3 mpfi i want to turbo my gypsy also i am confuse about turbo please tell me brother if i use 2.4 cc Engine,s turbo like of mahindra that or Mahindra scorpio of tata safari 2.2 turbo please please reply 🙏🏻🙏🏻
I found out I use 2.2 liters Diesel engine turbo plus Blaow off valve If u want to See Video Visit my Instagram page -- Fateh_Mehkma_07
@@gursharansingh7682 cannot find your insta page
@@suryamehta8249 call me 7900000767 instagram.com/exotic_customs_ldh?igshid=x0sujehiuavu Exotic_Customs_LDH
@@gursharansingh7682 mejora en algo??
Is it effect mileage badly 😂
what type of turbine mounts
Jesus Christ !! 😲😲
how much Horse did it have without the Turbo?
Cameron Lemmeirfest 80Hp.
2
How much does this cost
Ye india me possible nhi hai shayad
@@__invincible97__ kisi logon ne BAleno me turbo lagaya hai
primo come puedo aser eso com mi Sammi¿
Where are u from
Mitesh Choudhary Puerto Rico
Engine G13b ?
Thawatchai Phuyim G13a with soch 16 valve cylinder head of suzuki sidekick/vitara (1994)
Which turbo,injectors and ecu?does it have blockguard?
Hello,I have seen your engine on the dyno.....very good.I want to install a turbo on my suzuki engine G13B (sohc) for off road race in my country(Belgium).Where can I buy a camshaft for turbo......and wich turbo do you use? thank you very much...John.
Dude do you have Jimny's Over there?
Stock camshafts
Scusa ma un 1.3 + turbo = 400 cv ? Mi sembra strano ....CMQ Mi auguro che tu abbia rinforzato bene il telaio visto quanto torce...
Hai ragione
1.3 che fa 400cv ??? Si è strano
No strange there is videos of this car running in the sand I can send you a link and now has way more power
what is song track?
Welcome to Mexico.....
Damn thats wassupp
What country are you in. I have a gypsy 1.3 in India and i want the same kit that you using. Do you sale or any link???
thugbir singh bai mainu call kar lo 7900000767
@@gursharansingh7682 bhai aap ho yeh tuning shop ke owner .
Huzaifa Khan nai bhai par mai lgata hun turbo gypsy or jeep ko
Algo así es lo que yo quiero
Yo tengo uno capota dura también en blanco
If thats a single cam 1300
And you got 400 at the wheels
You better go join formula 1
O yeah
I’m 10.5 to 1
With a MLS 1.1 mm gasket
On ARP with double length helicoil s in block
Donde en pr eso es 1.3. Eso es 1.6 y alomejor cortao a 1.8.
Eso que ves ahi es un motor 1.3 litros (original samurai) con tapa de bloque 16 válvulas de Suzuki Vitara
Yo I'm pretty sure I'm fucking seeing 1.3 liter turbo I know because yo tego un 1.8 rotativo turbo
i highly skeptical about that claim
i only need 300
I have gypsy mpfi 1.3 petrol engine can you turbocharge it ?
Ofc it can be ...but be aware that you'll lose mileage and reliability...so think about it twice
@@ryosuketakahashi1749 won't installing a small turbo would help in mileage ?
@@jayrajkhanna3896 it will...but turbos boost pressure in the engine, so unless you are ready to spend some decent cash and upgrade all the stock internals to performance ones,you shouldn't expect to increase or even retaining the original mileage
@@ryosuketakahashi1749 around how much bhp I would gain and what will be the investment
@@jayrajkhanna3896 I recommend you to look up turbocharging on TeamBHP forum you'll get answers to all your questions..in short there are many more steps before turbocharging,like parts uograde, ecu remaps, and many steps after turbocharging,like tyres upgrade, suspension upgrade and many more. So while all this turbocharging sounds fun , expect to spend 4-5 Lakhs for this level of performance
Transfer case in shock =))
Ok 400 hp
For how long
Unless your on E85 or Meth
With 1100 cc inj a massive fuel system
3 inch open exh etc
I should know
I make 272 whp from a G13 b Suzuki
I’ve seen dyno figures all over the internet
Some I just don’t believe
Better jam an air filter on that sucker or she’ll suck in some plastic bag if the street s
I guess you’ve never been to Puerto Rico
Tirando cambio roliao en el dyno no da resultado real. Eso esta apenas en 300.
🤣🤣🤣 al contrario se suponiese que diera menos lo que cuenta no es la Vuelta de la goma si no la Vuelta del rodillo
That is not a 1.3 i own a 1.3 and it looks nothing like that.
im pretty sure its he's probably running a 1.3L G13A or G13B block with a 1.6L head. depending on the block, those heads have bigger valves and flow overall. im sure he opened up the exhaust ports for that snail he's running too. not hard to get was he has.
Nah dude, 1.6 Vit ( G16A / G16B ) & 1.3 Sierra / Samurai (G13BA / G13A / G13B) all have different injector placement unless this was a custom block. Just watching this thing in action i know for sure that aint a 1.3 or a 1.6 Way to quick even with turbo.
g13b block, g16 vitara head.
1.3 block, 1.6 16valve head... puerto rico bro...