ไม่สามารถเล่นวิดีโอนี้
ขออภัยในความไม่สะดวก
WIPERS WON'T TURN OFF? THIS IS THE FIX!
ฝัง
- เผยแพร่เมื่อ 2 ธ.ค. 2017
- Wiper Pulse Board: amzn.to/2jGMMbt
In this video I show how I was able to fix my intermittent wipers on my 2003 Chevy Suburban. This should be the same or very similar process for most gm vehicles of this era.
**This channel is for entertainment purposes only! Do not do what I do. Do not take my advice. I am not a professional. The methods I use may be completely wrong and/or dangerous. Please seek professional help with anything and everything and do your own due diligence (research). Working on cars is extremely dangerous. I am not responsible for any loss of life or limb or property. DO YOUR OWN RESEARCH. THIS CHANNEL IS FOR ENTERTAINMENT PURPOSES ONLY!**
FTC Disclaimer: I am an Amazon affiliate. As such, I earn a percentage of sales made through Amazon Affiliate links found in the description of my videos and on my website and other places.
![[TH]FFWS SEA 2024 Fall - Knockout Stage Day 1](http://i.ytimg.com/vi/nsDmUQdWVtg/mqdefault.jpg)
The grease on top of the round gear should be dielectric grease (bulb grease).. Thre are two contacts on that wheel which those two fingers contact with. If you get a big wad of grease in between them, you might see some issues come up.. Those contacts are the timing circuity sensor for knowing that the wipers made it back home position again...
Great video here. I would have liked to see inside the box though (gear part and how it was greased)..
thanks!
My 1997 Silverado had the same issue many years ago. It was a cold solder joint issue. It took longer to heat the soldering iron up then it was to fix it. The broken solder joint just needed to be reheated. The issue was with one of the three solder connections located top left of the image at the 5:30 mark of this video. If you use a magnifying glass you should be able to spot the broken one. Thin crack that encircles the soldered post. Or just reheat all three.
The issue I had and repaired was 20 years ago. No problems since . . . with the wipers that is 🙂
your videos are actually entertaining to watch , i dont know why but i really like them , short , great quality , and most important working on an old everyone got one cars . keep them up , great work .
+Eyad Jam Thanks!!
on point instructions,,n nice add
Stan,, I wish to add,,that before you remove the wiper arms, mark or scribe a reference line for reference /re assembly
Thank you. Although mine is an ‘04 Silverado, the process was very similar. A couple of minor differences but those made mine slightly easier. I received the wrong part, so I’ll have to wait til Sunday to reinstall the new one. I wouldn’t have even attempted this project except for your excellent detailed video. Thanks again.
Love to hear stuff like this. Good luck on your fix!
Good job, Jimmy. I have watched you do a lot of car repairs over the years of following you on TH-cam. I believe the first one was the brake job on the Mercedes back in California....
+VanisleNSX nice! Thanks for keeping up!! Seriously appreciate.
2000 suburban. Changed out the transmission assembly and found out about this part. Thought it was all in the knob on the column. Not on the motor...
I'm glad because column disassembly is a tougher job. Hope it works.
sometimes its the multi switch on the steering column
Excellent, very well described, with good clear instruction and filming. My problem is that the wiper's won't turn off, from any speed, but this vid gives me the confidence to give it a go.
Philip Croft same here. Thanks for the instruction.
Chris Farley yes it was the wiper module. Replaced and working
FYI-The board needs to be pulled out of the enclosure and flipped over to see the failed solder joints. It usually fails around the plug area due to flexing of the board.
Needs to be?
@@CbrF4i600cc If you want to fix it to access the solder joints that fail
Gotta send a big thank you! to 1Road for this post. I just fixed my 2003 suburban wiper issue with this very fix. Much appreciated!!!!!
My wipers can be turned on but not off also. i will be doing the pulse board when it arrives. Thx for the vid!!
It’s been 4 years. Are you gonna upload the video taking the pulse board apart and seeing what was wrong with it? You said “stay tuned to see what was wrong with it” and I’m getting old bro. Hurry up 😂😂😂
Yea, if you are going to promise tu do a vid on why it failed to your loyal viewers, you better follow through. 😮
😂😂😂😂😂😂 you jazzed me
5years and still waiting
6 years still waiting
What a day in age we live in. Just to imagine having this much information when I used to work at a Chevy dealer. Do people use service manuals anymore? LoL Great video btw.
I have the exact same truck except mines a 2004 and my windshield wipers are crazy please get back to me thank you love your videos brother
Nice job! Repair well done. Much appreciated, your sharing this experience.
Hi, it is not wise to use silastic to seal electrical enclosures unless it is the special ammonia free type ... ammonia corrodes copper and brass and will destroy electrical equipment when utilised in gaskets.
I had this same problem. Do NOT buy anything but AC Delco parts. I foolishly bought an aftermarket ~ Dorman circuit board, it lasted three weeks, and my wipers stay on.
This just happened to my 2003 tahoe. I realized my foglights weren't working the other day and suspected it might be the relay so I swapped the relay with wiper relay of the same part number. My lights still didn't work and it ended up being bad bulbs. It just found it odd that both bulbs would be out simultaneously. Anyway, the next day I have this wiper issue. I think my disturbing the relay may have been just enough to irritate my pulse board enough to cause the solder to fail.
I took out the fuse for the wiper put it back in and haven't had the problem anymore don't know how long it will last.
Good for u. I did same and they are still on
@@baddabingbaddaboo100 There still working. Maybe the wiper motor is bad. Take out the fuse and disconnect they battery then hook everything back up and see if that work, just a suggestion.
You may want to check if there was a recall for this and get your money back. GM issued one for a huge number of trucks back then.
Bad Drivers of North Texas yeah my 95 is included in that. never been done either.
Kyle P Same here. I just did it myself years ago. GM owes me a few hundred bucks
I have a simular problem in my vw polo 6n! The wipers have a life of their own! Sometimes they turn on while using the blinkers and sometimes they just turn on from nowhere! it effort from you moving the breaker to the on and off position back and fourth until they stop and then start 2 minutes later
Great advice. Worked perfectly.
Get out and smack module they usually start working
Thank you much for this great vidio.
Good information but can't get the wipers arm's off what I need to do?
Thank you for the help!!!!!!!!!!!!!
My 95 has a incomplete recall for this. Not sure if my local dealer with want to fix a 20 year old recall.
thanks for the video.
Could it be the same issue on a 87 Chevy Caprice? Seems to stop sometimes, but always goes crazy somewhere along the way
I got an 88 caprice , Did you get your issue fixed ?
Great info bro !!!!!! STRAIGHT forward and to the the POINT... thank you my friend.
Im having issues with wipers not turning off. The wipers cycle threw the speed when you turn the switch but wont turn off. I currently have the fuse off to stop the wipers. Any suggestions?
Replaced motor,board still had issue,before spending or wasting money,pop the hood and disconnect the plug to the wiper washer. If the blades shut off than your washer motor is bad not the wiper motor
I got a pontiac vibe and i had that problem thank u i unplugged the washer fluid connection and then stop working on there own back to normal thank you lol from tearing everything apart
Thanks good video
Thanks
Hey I'm having the same issue with my 02 sls seville cadillac. Any suggestions on problem solving?
Do you know where the wiper relay is located? I think he is the problem, won't my windshield wipers turn off?
I thought I had the same problem...windshield wipers wouldn't turn off. They ran at fast speed until I turn the key off (strangely enough they sometimes turned off when my revs were low but when I stepped on the gas they would start up again - full speed)...
Sooo... before I could change the motor it burned out from being on for a week. Whoops!
I switched out the motor which came with a new pulse regulator onboard but... they are still running.
Seem to have two speeds this time but they are still not turning off.
Steering Column switch?
Need same for rear wiper staying on
Hi, my peugeot 308 headlights and wipers are always running even ignition switch off.
I checked fuses relys all good. Changed front fuse box but still same. Can you help please what could be thank you.
I have a 2004 Colorado when the key is off the wipers will still work help me sir
I'm about to lose my mind. Why won't this just turn off with the switch?
Gm products are the worst on the planet
I have a 03 Monte Carlo SS, I cut my car in this morning to warm it up and all of a sudden my wipers turned on and went full speed, it did it multiple times but would cut off if I used the button. Now they won’t go down in their cubby when they’re not in use. Is it the pulse board???
I have a 1998 Chevy Cavalier. The wipers won't turn off when I turn them off. They'll only turn off when I turn the car off.
The problem is it's a cavalier. Cavalier is a piece of shit. Sell it to someone that doesn't know any better
What abt the rear wipers?
Btw I don't have a new body style yukon or tahoe but I've seen a few issues with the 5.3 engines. There's a oring on the oil pick up screen that can go bad and you loose oil pressure. Just letting you know if you don't keep an eye on it.
+sneakysnakepie1 👍👍
Did GM fix the o-ring oil pan pickup issue in the 5.3?
@@PrimalMiltos I think it all depends on age of the gasket if it hasn't been changed.
@@sneakysnakepie1 No, it all depends on the material and the design of such a critical system. The engine's oil pickup should not be a concern for at least 500000 miles unless there is a flaw. Hopefully GM improved its reliability in later versions of the LS motor.
@@PrimalMiltos then dont buy one then
hello I have a 2005 navigator and i'm getting pretty pissed because one shop told me that my wipers quit because I needed a fusebox i'm not a mechanic but everything else worked so why would I need a fuse box another shop tested for power at the wiper motor he says it's getting power but not from the fuse box so I replaced the fuse box still no wipers any suggestions? this is very dangerous. any help would be greatly appreciated.
Why does my rear wiper only do interval even on regular speed. Please help
you forgot about mention that they need to be tourqed correctly
I have the some problem only that mine the water washer do not spray on the window it does it only when he wants to
92 jeep cherokee wiper wont shut off. thanks
Mine is a new fuse block
What was that part number
What I'f mine only works on low and high but won't turn off
So I have a 2006 Infiniti g35, my wipers are going crazy they won’t turn off but they do sometimes then they start back up turn on and off and also it stays on the same speed can this be the same issue or the motor? I opened up and heard the motor it made a sound almost like if it didn’t want to give much power but now I’m wondering if it could be this. Any help would be greatly appreciated.
I have the same problem on my 2008 Nissan Frontier. There doesn’t seem to be pulse board on the motor, I don’t know if it’s built into the motor. In that case replacing the motor might fix it.Any luck finding a solution on your Infiniti?
I already replaced my wiper motor and it worked a few days and now I replaced my wiper/signal switch in my 5.0 2011 mustang and it's still doing the same stuff. What else could it be?
Did you ever figure out your issue? My SN95 GT wipers stay on medium no matter what they’re set to except for max speed. When they’re set to max, they go fast af. The wiper fuckery is the last thing I need to figure out so I can get my car legal, it’s been like 6 months 😭
Is this process the same on a 03 tahoe
I Think, You Need Sealant on New board??....I May be Wrong!!
there is not a single dust atom on that car , where do you keep that car ! in a well sealed vacuumed underground nuce shelter !!
Jimmy, where are the Vlogs? It's been a while..
Sorry, they're coming soon. Been sick!
wold this make blinkers not work
My wiper doesn’t stop even i turn of the car 😂😂😂
I have to use hand from outside to stop
Hey same situation. What you do to stop it ?
Great, another DIY, I will not be able to perform, ugh.
It was raining outside? Lol
I had to change a windshield wiper motor on a 1994 Chevy Blazer because it stop working
Dumb shit.I think im going to buy a old school again.
If your having this is push them down In the off position
Push them down ?
Push what down ? Wtf
They used SMD electrolytic capacitors. I'd put my money on that being the culprit.
why dount you work on the 1995 eny more
+Juan Silerio I do and will, just had to get these bugs worked out of the 03 for the family.
1 Road ya man thats good
Hi scotty i have a wiper that keeps on going even when i switch it off. I hope you can help me
I'm having the same problem on my 95 Silverado.
I'm having a problem with my wipers got the new multi switch 2003 ford ranger edge my wipers stay on now help please
Thanks