Carnage - We Finish Building Our 1UZ... And Now It Doesn't Fit!
ฝัง
- เผยแพร่เมื่อ 3 ต.ค. 2024
- Our 1UZ-FE engine is throwing all kinds of curve balls at us, and now that it is all together it doesn't actually fit into the engine bay!
Street Machine Carnage is all about having fun with cars. Sometimes it's serious performance, sometimes it's crazy fun, but it always interesting and done on a budget.
If you wish to send the Carnage team fan mail, mail to:
Street Machine Carnage
Unit 9/3-5 Gilda Ct, Mulgrave VIC 3170
Subscribe to Street Machine for V8-powered good times
secure.whichca....
Street Machine is Australia’s number-one modified car magazine, bringing V8 and six-cylinder powered good times since 1981.
We live for tough street cars, and the guys and girls who use them. Our channel features event coverage from all over Australia, including burnouts, drag racing, dyno competitions, show ’n’ shines and high-quality technical videos.
So follow along as we bring the magazine to life, and remember to check back regularly for new videos. www.streetmachine.com.au
Sign up to our free newsletter: www.whichcar.c....
Facebook | streetma...
Twitter | / streetmachine1
Instagram | / streetmachinemag
TikTok / streetmachinemag
Join the conversation: #streetmachinemag #streetmachinetv - ยานยนต์และพาหนะ
19:46 Scotty needs a shoe sponsor!
I like the idea of the Lexen being a registered street driven car. Luv the challenges you tackle Scotty with your builds.❤
Well done scotty. Would love to see more aussie collabs with bcw, skid factory, mcm, haltech etc take something to the yanks get the Cleeter crew onto it and have an aussie vs yanks in something haha
Because they stop the Mexicans at the border wall?
I’d love to see Cleeter and crew build a 1uz skid car
Honda K24 swapped Holden Camira with Boostedboiz Kyle and Wyatt
Huge respect Scottie ! Building your own engines and doing your own conversions!
Hi Scotty, I put a twin turbo 1UZ in my VK about 16 years ago and modified my rocker cover to clear the booster. Slightly cut it down and welded on some alloy plate to make it step down for the clearance I needed. Just another option for you. Cheers.
That's actually what we're going to do. After looking at every option it actually seemed to the simplest way of solving the issue.
Good option. Was thinking the same...
@@STREETMACHINETV Another option is a hydro booster, they are expensive though. I had the same issue with a VVTi in a 90 series prado, just accepted the fact I have to remove booster and master to change #8 spark plug.
@@Degekoify ouch!
@@STREETMACHINETV Obviously a solution would present itself eventually, but I'm relieved and stoked that you've found it! This thing is going to be bloody ace when she's done! I can't wait. Cheers Scotty, rock on mate "-)
If I remember correctly Al from the skid factory ran into a similar issue and used a Subaru booster and master cylinder to solve it. The booster pushed the master cylinder out farther from the firewall but was several inches smaller in diameter.
Yeah i was going to comment this, i remember seeing that and seemed like a good solution.
Al has a wealth of knowledge.
Booster issue aside... HOW BLOODY GOOD DOES IT LOOK IN THERE! Great stuff mate, this is going to be such a cool car.
Looks great doesn't it.
I think this is my favourite project yet. Something hilariously cool about an all ‘Yota V8 Commy. Great donk in a classic Aussie family wagon.
Fantastic build, loving it.
Take care of yourself Scotty, you didn't sound 100% when the new pump showed up.
Scotty you'll get it.on that note cars or combustion engines been around since 1886 and its still Chuck's a spanner in the works thats why we do it all for sense of accomplishment.peace
Bit of carnage to start ya Friday morning 🤘🏻
This is always the best way to start my Friday morning.
Always a Challenge.
Keep up the good work Scotty.
Retro power in the UK recently made some billet Valve covers for a 1UZ they fitted to a BJ / FJ45 Landcruiser - maybe they might send you the file so you could adjust it to fit around the booster and also accommodate the coil on plug conversion - worth a try.
Sounds cool but expensive
Look at shifting engine over to the side a bit. As Al from Skid Factory explained, Holden did that when they put the LS into the VT - VZ.
Good stuff as always Scotty! Keep at it, it's going to turn out awesome, I know it! Love the work you're doing mate!
U could use a booster out of a Gemini mate there pretty small would obviously have to mod the bolt holes to fit it properly
Haha, perfect description for being "on the piss". You cracked us up last episode with that phrase though, wouldn't be Carnage, without dramas
Blood donation and carnage day! Love your vid Scotty! Plus 1 for the shoe sponsor
Uppp the Lexan..... Wow thought ild never say that 😂😂😅 recently picked up a factory 5 speed vn shell tossing up what to throw in it
You need a VS V6 plastic booster, much smaller than the big dual metal one
Just thinking scotty mate the rocker cover on the brake booster side, if internally you have enough room, then cut away enough space for the rocker cover to move around while the engine is running and clear the brake booster as well, easier than replacing the brake booster i would think IMO. 👌👌👍👍🚗🚗😀😀😎😎
At the 15minute mark the engine looked sick with exposed timing belts and massive plenum, keep up the good work
Looks like you could use a v6 plastic booster set up they sit closer to the fire wall but r bigger
Looks like you could use a v6 plastic booster set up they sit closer to the fire wall but r bigger
I was waiting for some quality Scotty clearancing just for the heck of it 😂
You won't have to wait long
@@STREETMACHINETV yeah yeah that’s what we like to see!! Cheers Scotty !!
This is going to be an amazing build I can't wait to see the start up video
I would not change a part because of a bad thread. Instead I wold give it a try to fix it with heli-coil insert. They are stronger than original threads in aluminium and you save money and time for ordering parts.
By memory a fella out on Barry St Bayswater converted a VN and he had same issue ,mods to sump and engine mounts to drop it a inch or two to clear booster and manifold /header issues ,good luck bud im sure you will sort it ,not a huge issue
you need Brett Battersbey to help out ,who can forget hes lil Fiat Niki ,GETNCKD
HydroBoost for the brake MC maybe? Looking good though Scotty. Such a pain when you have to wait for parts that you didn't think would be required. Good thing it's not a daily driver cos then that'd really suck!!!
Quickest fix is a booster delete, then you have a consistent brake pedal no matter what manifold pressure.
Awesome work as always Scotty. Have a 1UZ in a Commodore with the VS plastic brake booster, still hit but there's room to clearance the corner of the valve cover.
Nice, new carnage stuff on thursday evening. 👍
I forget that it's still Thursday on that side of the world :)
@@STREETMACHINETV seems Aussies are always faster than Europe 🙃
willwood master cylinder booster delete kit OR
cal custom black single 7 booster which is way more compact
Good luck mate
Vs plastic booster would be the smaller option
I can remember a old street commodores from the 2000's with the pscyo ute on the cover it had a small article on a 1uz swap in a lexan wagon
Scotty, the K26's are supposed to go over the powerlines not inside the Carnage workshop! Looks like you go through a few pairs, the soles must be soft compound racing rubber.
This is making me "not" on the piss anymore 😂
I had to cut a corner off my rocker cover, and ali weld a plate over to fig my 1uz into VS SS. But then the engine came forward to get the 3" turbo down pipe past the fire wall. To get the mod plate, must have 20mm from the body of the car.
WHERE CAN YOU GET DUNLOP K26's now
Scotty mate like you have always said, Measure first before anything, cutting or putting it on or in. 🚗🚗👌👌🙌🙌😀😀😎😎
Try holden Gemini brake booster there allot smaller then the commodore
cut the mounts and lower the engine as the new intake looks like you will be cutting a hole in the bonnet but then a old school b&m super charger would look nice on the 1uz
Sump doesn't have enough clearance
Good work Scotty. She's looking good. What about a Willwood non boosted setup?
Did homer say something. Dohh 🤦♂️
I’m so glad you are doing this Scotty so I don’t have to 👍👍👍
As other have mentioned, clearance the rocker cover was the most common fix for the issue, its what i did for my 1uz vl
Hi Scotty i have done a commodore 1uz conversion. i Had to run k frame spacers drops the engine down more. But you can run the Willwood kit if needed. But not the best on the street
thanks for the info, because it's a street car I want to keep the booster.
Good investment, hope it pays off in the future
Being a turbo engine would it not be better to just find the smallest booster that bolts up and run a vac can somewhere?
The engine does look good in the bay tho Scotty 👍
the volvo should have room 😅
good Aussie approach to stuff Scotty...................without all the wannabe comedian BS
That engine looks frigging awesome
Engine looks good in the wagon, shame about the bloody booster bro! Hope a smaller one can be found. Personally I’d use that transmission ( 400) out of Trolvo as it has proved it can handle a good hard kicking.
You need that little ~8" Hilux booster - ask Al Butler from The Skid Factory.
Also, for exhaust manifolds, do a pair of logs and run them to the front of the engine so you can fit a single G30-770 turbo for RIDICULOUS boost response and big-block torque output throughout the entire rev range...
That would be way too small, it'll choke the shit out of it, sure it'll have great response but the back pressure in the exhaust housing will be huge and a 4-litre turbo with that boost response will not make for a good streeter.
@@STREETMACHINETV Pshaw just use the 1.21 housing and a big wastegate, she'll be right!
Well done from New Zealand..
They're such good looking motors especially all cleaned up and blasted like that.
Any tips on how you got the front sump? Its been a major hurdle I've had in progressing with my build as the only ones i find have an asking price more than what i paid for my whole 1uz motor and box 😢
We found one reasonably easy, but it wasn't cheap.
Castlemaine rod shop do a willwood master cylinder with a brake booster delete for Vr/vs commodores.
I’m no commo guy but if theskidfactory has taught me anything
Subaru booster 😂
Hi mate
Have made video about your self .. your back ground where you got your skills ,family ?
Just curious be watching for years 👍
Yes I have. It was a Carnage Plus episode called 20 things you didn't know about Scotty, or something like that
This build is definitely giving me inspiration and helping me troubleshoot my own build of a 1995 Lexcen Sedan with a 93 Soarer 1UZFE swap, have both cars waiting to do the swap. While mine wont be a modified engine (just a straight swap over) knowing about these clearance issues and geniune Toyota parts from Dubai really helps!
Can I ask Scotty, what did you source for the front sump swap over and did you get the oil pickup relocator with the front sump parts?
We got the complete set-up, sump, pick-up, baffle, etc. We found it on gumtree, not sure what it was out of.
Very cool! The wagon toyota should have built!
Hey scotty how about fitting a brake master with a VH40 /44 remote booster out of the way as per old Valiants. Surely YOU can sort that shit
Not alot of room for such shenanigans
Good episode Scotty. You're having trouble fitting it in a commo bay? I picked a 91 ls400 for $225 as a donor for my Gemini wags and after buying and setting up a m90 on the 1uz I quickly realised how small the gems bay is in comparison to the 1u. With the 1uz sold the gem's now getting a 253 built to 'street machine's little league' build spec's.
They're a wide engine, that's for sure
These seem like a real no fuss engine that could probably fly you to the moon and back. Wonder how it’d go slotting into a classic Holden. It looks quite wide at the top!
They are wide
Definitely much wider than a pushrod - but not the worst wide load offender for a 32 valve OHC V8, that's for sure.
Can you guys go more in depth with the ice blasting process for the manifold crossovers?
I’ve seen them use dry ice blasting on old Porsche undersides and it brings them up better than new.
We showed the process in an earlier video
Scotty do a willwood booster delete kit
It may not fit, but it looks good in there!
🤣🤣… love watching Scotty… I have a thing 4 train wrecks 🤣
Haha
Proflow catalogue page 318 should work
A compact remote booster will sort all your clearance probs
😂 you love Dubai now Scotty 🤣
WOW I thought The Rod Shop was getting past all the “fitment issues” over the last few years.
What a world wide embarrassment for them. #OneJob
Did CRS mention brake booster issue? maybe the mounts are flipped the wrong way or something easy
So I'm betting that idler bolts not bent an it was just the oil pump housing making it look like it was bent
The idler was bent also, we tested it in the drill
The 1UZ factory haha. Al n Woody have done a couple of 1UZ conversions on the channel plus all the other conversions Al has done in the past. Definitely someone I would ask if I was stuck with a conversion.
I've talked with Al a few times about this conversion.
Al probably defers his Q's to The Hoff.
Scotty ingenuity😁🇭🇲
Wish you stop teasing a girl with taxi in the background !!!! When you gonna run 10's !!! LOL
LOL, I know it needs to be done. The car literally runs and drives
use the plastic VS booster, first, see what room you have left, then do some notching to VC
I havent gone through all the comments, but one of the "old" fixes for problem like this came from a Gemini. Most will be tired by now...but there should be a modern alternative. Or go completely Back to the Future and breach out a remote VH44!!
vl or vn brake boosters are smaller from memory ,
otherwise try and find a old skool vht remote booster
Electric brake and booster system?
Nice job Scotty. Do you have a cold. your voice sounds different 😅
Yeah, I probably did at this stage.
Which Dubai supplier have you guys been using? building my own 1UZ, but Harrop supercharged instead!
PartSouq
Are the mounts offset? Could try swapping left to right?
They're marked driver side and passenger
I own a 3uz 4.3 Crown Majesta and I must ask. How come you ordered from Dubai as opposed to locally? Was it cheaper to get parts from Dubai? genuinely curious.
Couldn't find the parts locally, and they were cheap in Dubai, even with postage
Scotty, proflow make an 8" booster. Shouod be in your vpw catalogue
Not a bolt in though
@STREETMACHINETV I thought I posted a link to the willwood master cylinder that deletes the booster. TH-cam must have taken it down but there is a willwood option
just wait till you try to fit the Hemi 6.4L V8 into the LC Torana lol....
😂😂
Wonder if a new tshirt will come out with " on the piss" on it with a picture of a bent bolt
Scotty do you just find all your torque settings off the net?
Pretty much. I do tend to check multiple sources though
What was the adaptor you were using on the sump studs?
Stud remover, from supercheap auto
The vy had a smaller radius and deeper booster. Such a ball ache
Was the price fair on that oil pump ?
Actually I'd be keen as to see wts been spent on all the carnage cars that would be sick an GD for ppl to grasp what it takes to make things fast
I think it cost us $200 delivered
Source Scott? I have everything but an oil pump for mine so may as well for that price!
@@defcon1ss PartSouq
@@STREETMACHINETV cheers for the speedy reply! Appreciate it man.
Scotty what parts supplier in Dubai did you get you parts from
Part Souq
looks like 2j out the trolvo
Damn, always some thing with engine swaps....maybe sit the engine 25 mm towards the passenger side? like ol mopar v8s...GO 1UZ GO SCOTTY...
🤔 no booster ?
Scotty you got a secret stash of Dunlop kt26 mate?
I wish
Castlemaine rod shop has a boosterless set-up mite solve your problem