It is amazing how much better it looks with those stupid flares removed. What engineer in Japan, actually THOUGHT those were stylish? GREAT WORK FRED!!
RZR 1000 with a VW Beatle body … or. Can am Beatle , people are doing this as a loophole so they can drive their UTVs on the roads, look it up here on the tube . Your gonna want to make one after you see it. I also told D H Dave
You could use plastic body plugs/christmas tree fasteners to fill in the holes. You can leave them natural color or paint them with a plastic/vinyl dye - black or body color. You can put the square plugs back in the square holes and then put a plug in the center to cover up the hole for the screw.
I learned something interesting about these 80 series and one reason they're still so pricey. If these were traded back in at Toyota dealerships and fit a certain criteria, they yould be sent back to toyota and refurbished and sent over seas to countries in Africa and South America.
4x4 Labs in Grass Valley, CA makes a really nice weld together rear bumper kit for the 80. I have one on mine and love it. Might be a cool episode showing everyone how to weld one together on the Dirty 80
OnX trails saved me on the Poison Spider loop. I followed some tracks, thinking it was an alternate and went way off the trail. It got me back on trail where it wasn't obvious. Flat slickrock rarely has tread marks!
You could use nutcerts in the hole like your sliders on nubesock. Or small fiberglass patches on the inside and Bondo the outside. Also definitely need rattle snake covered seats now.
Good video, I picked up an Lx450 removed the flare’s and side plastic’s a while back it has so many more holes then the Landcruiser’s, still need to fill them holes. Thanks for posting
I almost got a set of land cruiser axles for about $500. Was going to put either the front axle or both under my 91 4runner. Still plan to put a 2uz in it, but solid axles will have to wait until I can get what I'm after.
about 1 min in ' it's kind of old , it's kind of ugly , was cool once , it's been replaced by younger hipper things ' ....... i take that personally ... oh hang on , Fred was talking about that truck wasn't he ?? lol
It is amazing how much better it looks with those stupid flares removed. What engineer in Japan, actually THOUGHT those were stylish? GREAT WORK FRED!!
Band aids. Band aids to cover those holes would work. Use neosporin to heal the holes underneath. Give it a few weeks, good as new.
I appreciate how you call them "pieces of flair"
RZR 1000 with a VW Beatle body … or. Can am Beatle , people are doing this as a loophole so they can drive their UTVs on the roads, look it up here on the tube . Your gonna want to make one after you see it. I also told D H Dave
looking better each time we see it
Hey Fred, thanks for the content.
Out of all the car/truck shows/vids I watch you have, by far the loudest impact gun
Just bed line the bottom half
Always wanted one of these, minus the spiders.
I love the no flares look. I painted my 93 LC white . If I deleted mine, i'd have to paint. bummer.
Yur ol Buddy was just installing a cage and sliders in an fjzlxwhatever it is... Look forward to the next episode!
You could use plastic body plugs/christmas tree fasteners to fill in the holes. You can leave them natural color or paint them with a plastic/vinyl dye - black or body color. You can put the square plugs back in the square holes and then put a plug in the center to cover up the hole for the screw.
Plugged the third brake light hole on the tailgate for my jeep like that.
Done that on a flair delete on a shotgun sport, looked pretty decent esp black plugs on a black car
I learned something interesting about these 80 series and one reason they're still so pricey. If these were traded back in at Toyota dealerships and fit a certain criteria, they yould be sent back to toyota and refurbished and sent over seas to countries in Africa and South America.
Love the tire falling! 😂😂
"Old, a little bit ugly, got a few miles, a few dents" My favorite kind of 4wd
4x4 Labs in Grass Valley, CA makes a really nice weld together rear bumper kit for the 80. I have one on mine and love it. Might be a cool episode showing everyone how to weld one together on the Dirty 80
Fill the round holes w/ the appropriate sized pop rivets.
thanks Fred
About threw my coffee across the room when the "rattle snake" came out--THANKS FRED😅
Cool video Fred, thanks
OnX trails saved me on the Poison Spider loop. I followed some tracks, thinking it was an alternate and went way off the trail. It got me back on trail where it wasn't obvious. Flat slickrock rarely has tread marks!
You could use nutcerts in the hole like your sliders on nubesock. Or small fiberglass patches on the inside and Bondo the outside.
Also definitely need rattle snake covered seats now.
Sweet rig, Fred. Looking forward to the ongoing build. Hopefully you'll remember to leave room for a gal pal.
Love the Dirty 80! Can’t wait to see the OME suspension and other details you will complete. You da man Fred!
Love your enthusiasm Fred
Good video,
I picked up an Lx450 removed the flare’s and side plastic’s a while back it has so many more holes then the Landcruiser’s, still need to fill them holes.
Thanks for posting
One of the greatest 4x4 ever build especially the diesel, mine has 612000km on the clock and still strong
I almost got a set of land cruiser axles for about $500. Was going to put either the front axle or both under my 91 4runner. Still plan to put a 2uz in it, but solid axles will have to wait until I can get what I'm after.
Looking good 👍👍
Regarding the holes left in the body, get some rubber bumper plugs and just push them in. :)
You could tape over the hole on the outside an get some black RTV on the inside let it dry an peel the tape👍🏼
Nutcerts for filling in the holes?
Cool vid. Do you know if you could use the third seat seat belts to replace the drivers seat belt?
How much would you want for the rear bumper plastics if you still have them?
Are you going to use that trailer hitch? I’ll take it Fred!
Living dangerously with that spare tire dropping
Can I purchase the right front fender flare?
Hey Fred,
What are you going to do with those brackets?? I need them.. 😅 From the rear doors
Are you going for an aussie style build? Would be cool to see some scrub bars on it to match the bullbar
Highly doubt it. Probably rock crawl it until its smashed to death.
Don't forget to remove the rattlesnake! 😅
about 1 min in ' it's kind of old , it's kind of ugly , was cool once , it's been replaced by younger hipper things ' ....... i take that personally ... oh hang on , Fred was talking about that truck wasn't he ?? lol
Weld it up Fred. It'll get bent anyway.
Cut the fenders for BIG tires....
Fred we all know you and body work. 🙃yep😉
I miss you and your partner.
My kind of "mechanic"😂
Comment and like for the algorithm, all hail the algorithm.
3D printed filler pieces maybe??
You're going to ruin it leave it alone it'll go forever the way it is
Not worth $165k!? Come on! Lol.
You very funny...
what about smog CA sucks
First
And last at the same time! 🤣
Ruined a million-mile vehicle