How to clean the Accuclean electronic air cleaner

How to Clean the AccuClean Electronic Air Cleaner
Cleaning your AccuClean electronic air cleaner is essential for maintaining its efficiency. Follow these steps to ensure a thorough cleaning:
Step-by-Step Instructions
1. Unplug the Power Wire:
o Safety first! Always unplug the unit before starting any cleaning.
2. Remove the Door:
o Open and carefully remove the access door of the air cleaner.
3. Take Out the Filters in Order:
o Remove the components in this sequence:
 Skinny Pre-Filter: Carefully slide it out.
 Medium-Sized part, Power Cell: Next, remove this component.
 Two Large Collection Cells: Finally, remove both of the larger collection cells.
4. Clean the Pre-Filter:
o Option 1: Use a vacuum to clean off dust and debris.
o Option 2: Gently blow off the filter with light air pressure or, if preferred, hose it off (ensure it’s thoroughly dry before reinstallation).
5. Wipe the top of Power Cell:
o Using a clean cotton cloth, wipe the flat surfaces of the power cell to remove any accumulated dust.
6. Clean the Metal Probe:
o Use a piece of Styrofoam to gently clean the tip of each metal probe located in the middle of each hole.
o Important: Avoid using water or any chemical cleaners on this component.
7. Clean the Collection Cells:
o Vacuuming: Vacuum the collection cells from both sides to remove debris.
o Blowing Out: Alternatively, use medium-pressure air to blow the cells out. Note: Do not use water or chemicals.
8. Reassemble in the Correct Order:
o Replace the components in this specific order:
 Large - Collection Cells
 Medium - Power Cell
 Skinny - Pre-Filter
o Ensure the arrow on each part is pointing towards the heating equipment.
9. Reattach the Door:
o Securely put the door back on the air cleaner.
10. Reconnect Power:
o Plug the power cord back into the outlet.
11. Reset the Unit:
o Press and hold the reset button for 5 seconds to restore operational settings.
Tips:
• Perform this cleaning once the orange colors appear or as needed, to keep your air cleaner functioning optimally. If the red LED is present you are very due for a cleaning.
• Always handle components gently to avoid damage.