Motobecane old moped engine restoration 1969 (2t engine)
ฝัง
- เผยแพร่เมื่อ 27 ธ.ค. 2022
- The renewal adventure of the motorcycle, which was left alone for a long time, began. Our motobecane classic 3500 moped, produced in France in 1969, is with you. Don't forget to subscribe to our channel for the continuation of this restoration story. The days when abandoned motorcycles and goods are better than before are very close.
- ยานยนต์และพาหนะ
![[Full Episode] MasterChef Junior Thailand มาสเตอร์เชฟ จูเนียร์ ประเทศไทย Season 3 Episode 1](http://i.ytimg.com/vi/Qs5zdBqLn_8/mqdefault.jpg)
You can support us by subscribing to our channel.
Hey i have a question, what was that salt u were using to remove rust?
@@watermelonwatermelon6513 Hello. i use lemon salt and hot water as rust remover (lemon salt = citric acid)
@@restoringo thanks bro
My mind is simple, if There is no annoying music that stays for the majority of the video, i enjoy it
you are right. I am also uncomfortable with too much music. The sound of the hammer is universal. is the same all over the world.
If you tickle the algorithm correctly you will get millions of views people love this stuff, including me
I would appreciate if you subscribe and support. The process is too slow for me.
Le moteur de ma bleue que j ai eu en février 67, le jour de mes 14 ans, souvenirs. Gérard.
Un si petit moteur pour beaucoup de liberté :)
Je n’ai jamais vus un degrippant réagir en 1 seconde on dévisse direct après 😂😂😂😂un mécanisme au top 😢😢
*_This is the most awesome thing I ever seen 😊_*
thank you very much. 🙏🙏
Браво друг.
Благодаря ти приятелю.
Brawo!
Great work on that engine!😁🛠️⚒️🔧
Thank you. In addition to the engine part, there is also a fully restored version of our channel. th-cam.com/video/w6E17pIYf5A/w-d-xo.html&ab_channel=RESTORINGO
EXCELENTE ES UNA MARAVILLA RESTAURAR VER EL CAMBIO DE UN ESTADO A OTRO ES FASCINANTE SOLO GANAS Y PACIENCIA FELICITACIONES AMIGO CHILE
Muchas gracias. el proceso es dificil pero estos comentarios me motivan. El video completo de restauración se subirá pronto.
Çok güzel bir restorasyon olmuş elinize sağlık Teşekkür ederiz
Güzel yorumunuz ve desteğiniz için teşekkür ederim. Kanalımda başka restorasyon videolarıda mevcut. Umarım keyifli zamanlar geçirirsiniz.
Beautiful work and how nostalgic compared to our rushed world!
Thank you 💖.
Thank you very much. you motivated me.
This is way better than an unboxing video I could watch these vid's all day long, except the wife would tell me to go fix the leaking tap. 😆
😂😂😂
Did you do it?
@Kenan_KARA I did eventually, I said, I'll do, I don't need to be reminded every six months.....lol 😂😂
@@sgntbilco ahah. Congratulations
You did an incredible job and without SANDER, it's very courageous, I would have liked to see your ignition breaker adjustment, it was the most delicate part of the engine adjustment.
It was my first moped called Suvega in India.
I learned mechanism in it, I love it for simplicity and its exsast note
I am happy about that. Full restoration will be on channel soon. Best regards
In bermuda we called it a moby., Had one one with a 5 gear head, block piston and carburetor, they fit on the single gear crankcase. At 16 many illegally raced them me included.
@@barrygibbons2722 🤫🤫illegal lives
Harika içerik ve emek devamlı böyle içerik gelsin sıkılmadan izlerim. Ülkemizde pek böyle içerik yapanı görmedim. Genellikle yabancılar yapar bunu onlarda böyle araba restorasyon falan izlerdim. Siz de Türk olarak bir işe girişmişsiniz bana da desteklemek düşer.
Çok teşekkür ederim kardeşim. Eksik olma desteklerin beni onurlandırıldı.
resmen görsel restorasyon ziyafeti çektik...
bu motorların ilk geldiği günleri hatırlıyorum , bizler için o zamandaki gençlik için özgürlüğü temsil ediyordu..
ellerine sağlık.. şahane işçilik..
Çok teşekkürler. Şuan son boya katını boyuyorum yakın zamanda baştan sona restorasyon videosunu yükleyeceğim takipte kalın.
Good job. Clean
Thank you. See you in beautiful restoration videos. Take care of yourselves
These Motorcycles Are Literally A Blessing One of the first motorcycles produced by Motobecane produces 35 cc power. It is french made. I live in Turkey and there are not many of these motorcycles. ie french made hunting 7 s av 3 s av 44 s very few and only produced in france motobecane has a very big trace in history
Evet ülkemizde çok yok. Ve ben bunu Türkiye'de restore ediyorum. Bir tane daha moped restore ettim oda yine ülkemizde neredeyse hiç olmayan bir moped Riga 13 Kanalda bulabilirsin.
Ayrıca abone olarak ülkemizde hiç yapılmayan bu tarz içeriğe destek verebilirsiniz .
@@restoringo Tabikide Dostum... Devamını Bekliyorum
@@ismetefeakcatg8463 çok teşekkür ederim.15 gün içinde önemli bir sorun olmazsa bu videonun full hali gelicek
Wow excellent capture my friend like and Greetings from Argentina 🙋🏻♂️
Thank you my friend. I am glad you like it. greetings to argentina
@@restoringo 👋😊
thank u ao much about this video ❤
Thank you very much for your likes and comments.
Этот метод реставрации называется - « помыл, покрасил»!
Благодарю. не раз мыл и красил, подшипники сальники менял. прокладки обновлены. учреждения почистили и все заново смазали и установили. Все видео скоро будет. Следите за обновлениями
Süpersin kardeşim ellerine sağlık devamını sabırsızlıkla bekliyoruz
Tres beau travail
Çalışmalarınızı ilgi ile takip ediyorum, başarılarının devamını dilerim
Çok teşekkür ederim. Sırada muhteşem bir motorsiklet var ülkemizde hatta dünyada az sayıda olan bir motor takipte kalın ve o muhteşem güzelliğe şahit olun.
Çok iyi iş çıkardın. Ellerine sağlık. Nice güzel projeler görmek umuduyla hoşçakal😊
Şimdi atölyeden geldim ve yeni restorasyon projemin motor restorasyonunu bitirdim. Yakında edit yapıp yayınlarım. İlgın ve güzel yorumun için teşekkür ederim.
bravo tout simplement sublime magnifique
Merci beaucoup pour vos likes et votre appréciation.
Под головку нужна алюминиевая или медная прокладка,но не бумажная15:50
да может быть но вообще есть такой обычай
Böylesine detaylı,emek isteyen bir calışmayı sabırla yapıyor olmanız bana ilham oluyor izlemek çok keyifli oldugu kadar adeta terapi gibi geliyor resmen deşarz oluyorum sabrına ve emeklerine sağlık..yolunuz açik,izlenmeniz bol olsun, hakediyorsunuz.
Çok teşekkür ederim. Ne mutlu bana.
Yes, it is therapeutic for fans of internal combustion engines, and also admirable. Thank you for the entry! Regards!
Yapıyorsun bu işi 💥👏👏
Çok teşekkür ederim. Eksik olma
It would be interesting to see this engine with a resonator and lobe valve !!!
Güzel çalışma olmuş eline emeğine sağlık, devamını bekleriz.
Çok teşekkür ederim. Yakın zamanda full restorasyon şeklinde videosunu atacağım
Wery good, perfect
Thank you bro
சுவேகா!!! நான் ஓட்டிய முதல் வண்டி 😊
Hello , can you tell me what products you used to remove rust in the video ? The one with salt thing and the yellow liquid. Thank you
Hello. Of course, I would be honored to assist you. Element citric acid (lemon salt), which I use as crystal, is available in every market. Increases the effect of hot water. its color is transparent but it turns yellow because it dissolves rust. If you have any questions, I will be happy to answer you. Thank you for your interest and support.
Le moteur était en mauvais état maintenant il est tout beau tout propre 👍✌️ tu utilises quoi pour nettoyer les pièces moteur de l'essence ? Pour enlever la rouille c'est des cristaux de soude ? Hâte de voir la restauration de la partie cycle 👍
Great material, great setup, great work. I am waiting for the full restoration. By the way your two Side hammer is very impressive.
Thank you. I guess the full version will be published soon. Hammer gift from a friend.
Very Nice Job what are the crystal you are using for cleaning the engine parts?
Hi great video it would be of been nice to see if the engine started up but great 😊
Thank you so much.
You can watch my moped working in the full restoration section.th-cam.com/video/w6E17pIYf5A/w-d-xo.htmlsi=1WgjkMhojfVJeVnJ
OK, Restoringo! So far so good! You have a lot more to do with this project! Are you sure that moped is 1969? Looks a little older. Anyway it's fun to see your skills. Hey, what is the cristal substance that makes the rust to transform into a green liquid? If it is a secret, ok, let it be! Greetings from Bulgaria, komsu!
Komşu merhaba the crystal thing is lemon salt 😊 It is very good at removing rust with hot water. But there is a detail that is not in the video, I cleaned them a few times.
Please upload one video TVS XL 50 bike Restoration, your videos are so good👍 please one video upload Thank you
The Mark 1 Raleigh Moped late 50s exactly the same but no ignition coil
I reviewed it. they are really very similar. Thanks for information
no way this thing has some kind of cvt and even a 2 stroke pipe thats insane, old masterpiece!
yes, you are right, even though it was in 1969, it was a perfect design. there is a cvt system that most current chinese engines cannot reach
@@restoringo exactly
Salut beau travail 👍
Je suis tellement contente que tu l'aies aimé. Merci
Great video! What was the thick engine cleaner you were brushing on to the parts? Seemed to work really well!
thank you so much. I first flushed the oil in the engine with diesel fuel. I cleaned the rusty parts with crystalline citric acid (lemon salt). Need to rub a little.
@@restoringo thats not what he asked.
muito bom restauro, LIKE 👍
Obrigado pelo seu interesse e apoio. Atenciosamente
bonjour
merci pour ce tres bon tuto , qu'estce que vous utiliser pour le nettoyage des parties alu du moteur , et je voudrais connaitre le type de peinture toujours pour l'alu
merci pzr avance pour votre reponse
I am very interested in the review of the nos moped video, nice to meet you, from Bromfiet Indonesia
AMATEUR.......IL VOUS RESTE A APPRENDRE LES REGLES DE L'ART .
Il est très important de pouvoir exprimer quelque chose correctement tout en disant quelque chose...
T 'INQUIETES .......BEAUCOUP ONT COMPRIS .......TOI C'EST SECONDAIRE. FAUT ÊTRE INITIÉ.
@@jacklehobofurtif4414 Je n'ai aucune hésitation. Vous avez dit au monde ce que vous vouliez en lettres majuscules glorieuses.
Great video but the pain i felt when u smacked the shit out of that cylinder!💀
👍👌
❤❤❤❤
Thanks ❤️
whats in the green bottle you pored over the parts?
Thank you for your interest. Green liquid diesel in the bottle. I used it because it is effective in dissolving oil. It damages the rubber material and should be used carefully.
La primera moto que Llo aprendí a cunducir gracias padre por darme lo que pudisteis gracias padre donde quiera que Dios te haiga llegado espero pronto hir contigo ya me cansé de la vida perra está guatafac 💔😭😿
thank you for posting. what are the crystaline flakes at approx 6:40 ? thank you
Citric acid (lemon salt). Use with hot water so it increases the effect. Thank you for your interest.
Bionik 51 ömrümü yemişti.sayesinde elim tornavida tuttu.artık sayesinde evde bütğn işleri yapabiliyorum😂
little tip: DON'T use the metal-bodied crank seals on these engines. installing them will deform them and make them fail early on. I know from personal experience. use fully rubber seals instead.
Thank you very much for the information. I hope it doesn't break soon. I'll take that into account for next changes.
@@restoringo alright. I enjoyed the video. keep up the excellent work.
Thank you
BONJOUR DE LA FRANCE
What is the cleaning fluid you are using? What are the crystals?
crystals of lemon salt. natural citric acid. An effective and inexpensive method on rust provides a very serious rust solution with hot water and occasional rubbing.
@@restoringo many thanks
Houla le joint de culasse ne va pas tenir longtemps. Le travail est bien fait (sauf que je n'aurais pas peint le bas moteur, le cylindre et la culasse), mais quel dommage d'utiliser des outils inappropriés (pince multiprise) !
Mais bon, c'est votre choix ! Autrement c'est bien ! 👍🏻👍🏻👍🏻
Merci beaucoup pour vos précieuses idées. Joint de cylindre remplacé par un en aluminium. J'essaie d'offrir le meilleur dans les possibilités de mon atelier.
@@restoringo 👍🏻👍🏻
Le principal, c'est de garder l'esprit "ancien 2 roues" à faire revivre. Car les cyclomoteursont fabriquaient en France ou en Indochine étaient très robustes. Rustiques, mais robustes.
merci tres bon tutto quel son vos produit que vous utiliser merci
peinture aluminium résistante à la chaleur. Appliquer un peu de chaleur sur le sol augmente l'adhérence de la peinture.
De quelle produit utilise pour enlever la rouille facilement et nettoyer les pièces par pièce à l'aide d'un pinson d'un produit et d'un bac ?
Tout d'abord, vous pouvez utiliser du diluant, du diesel, de l'essence, etc. pour l'huile et la saleté. Pour la rouille, vous pouvez utiliser l'électrolyse et l'acide. Les acides les plus facilement accessibles sont l'acide citrique, c'est-à-dire le sel de citron cristallisé. J'ai utilisé du sel de citron dans cette vidéo.
what rust removal technique is that
You can solve the rust in a few different ways. it depends on the severity of the rust. but the most preferred electrolysis and rust removing acids. I used citric acid here.
А подскажите пожалуста это блестящие камушки кипятком заливали это что?
What materials do you use when cleaning the engine block?
It is possible to use many techniques. I first used diesel oil to get rid of the oil. I also did mechanical cleaning. I also used cleaning detergent.
wich materials?
@@restoringo
parçaları nereden temin ettiniz bendede av7 motoru varda
Konya da neredeyse tüm parçaları bulabilirsiniz. Alim motor, zafer motor bunların kendi sitesinden alın fiyatlari çok uygun olur. Bilinen sanal pazar yerlerinden almayın.
Hello what is your product ?
I can't help you because I don't know exactly which product you are talking about. I would love to help you.
@@restoringo I'm talking about the product with the crystals, the one that looks like soap, in fact a little bit of all the products you use, the high temperature spray paint too
Thank you for your attention. I am happy to assist you. I first use diesel fuel to clean engine oils. Then I clean it before painting with liquid detergent. The crystals you see for rusty surfaces, on the other hand, lemon salt (citric acid) increases the effect of hot water. I use heat resistant paints when painting the engine part. the floor should first be removed up to a certain temperature and the paint adhesion should be increased. I hope I could help you.
@@restoringo Thank you :) good vidéo
Thanks 🙏🙏
Mirip dengan mesin villers
I see its got a round head with a square block,.a mismatch.Looks a little weird.
Hola, he estado viendo el vídeo y me preguntaba cómo se llama los trozos transparentes que le echas a las piezas para su limpieza, gracias.
Muchas gracias. Ácido cítrico (limón en polvo). Puedes apoyar suscribiéndote.
Gracias.
You put crystals into the water to clean the coils. What crystals are those?
You can safely use lemon salt (citric acid) on all rusts. hot water enhances the effect
Thanks mate
@@topmounting You can support by subscribing, thank you
why didn't you start the engine? It would be interesting.
Hello. Thank you for your interest. yes it would be better to run. now i'm working on my new restoration project i will post it soon. there is also a full version of this video you can see it working there. th-cam.com/video/w6E17pIYf5A/w-d-xo.html
@@restoringo Yes, interesting, thanks for the video. I myself sometimes did something similar or similar. Just like you restored a moped, I restored a 1951 IZ-49 motorcycle 15 years ago. But then there was no TH-cam. He also made homemade motorcycles. Now, after the Russian attack on my country, all this was destroyed by bombs.
Thought about the Jawa 250 project. 1964, but the war. Everything burned down.
Teil für das Moped kann man in Marokko kaufen alle Teile
Vielen Dank für die Information. Ich brauche jetzt nicht viele Teile, aber ich habe sie in meine Notizen aufgenommen.
Est-ce que ce moteur fonctionne ?
le moteur tourne. roulements, joints et joints changés. l'établissement a été nettoyé. Dans la deuxième partie, vous verrez l'ensemble de la moto restaurée et en état de marche.
dans les bacs tu met de l'eau chaude et du sel ou cest un autre truc ?
J'ai utilisé de l'eau chaude et du sel citronné. C'est un bon antirouille.
@@restoringo ahhh ok merci bcp.
Karbüratör yok mu. Carburetor ?
Bekir bey merhaba. Karbüratör var tabiki. Mopedin birde full video versiyonu var orada hem çalıştığını hemde karbüratörü görürsünüz. th-cam.com/video/w6E17pIYf5A/w-d-xo.html
69
Modelıvardı.bende.72yılımda
Aldık.25.yıl.kullandım.kapıdan.caldılar.62.yaşına.gırdın
Halen.gözum.arar.motorumu
Çok üzücü.
Dommage de pas utiliser les bon outils 🛠 et plus d’huile sur le piston avant de l’enfiler dans le cylindre
Esto es una mobilette. Francés
Boyamak için sıktığınız şeyin adı nedir
Silindiri boyamak için kullandığım boya ısıya dayanıklı alüminyum boyası.
Allez vous faire une restauration complète d'une mbk ?
Ouais. Je restaure tout. la peinture a disparu. pièce d'assemblage. bientôt l'épisode complet
@@restoringo hâte de voir le résultat !
N'oubliez pas de vous abonner et d'activer les cloches bientôt
@@restoringo 👍🏼😉
je voudrais voir le réglage du PMH et PMB
Where is this address.
Tucnekem egy ijen blokot az enyèm drabokban van ès menyi èrt
Ha valakinek szüksége van rá, az ár váratlanul magas lehet. Az ilyen ritka termékeknek nincs ára, az árat a vásárolni vágyók, az eladni vágyók nem árulni vágya határozza meg.
The wrong Cylinder head The Cylinder head should be square and match the square cylinder shape the one thats used is from an early Mobylette
Hello. The cylinder must be round, the cylinder head is round. This cylinder belongs to the Av 7 model. The one we have, the av 44 looks different for it.
Am I the only one pissed this guy just painted chrome onto the parts?
Good evening, i have made this process but the engine doesn't start on. Could you help me with setting it right?
Of course. Instagram restoringo dm
Здравствуйте, интересует номер сальников коленчатого вала, или размеры
Здравствуйте, я бы хотел Вам помочь. но это было давно и я не могу вспомнить.
Tamamını yeniliyecekmisin
Tabiki full restorasyon videosu gelecek şuan yüzde 80 bitti. Son kat boya ve montaj kaldı
Abone olmayı unutmayın 10 gün içinde kanalda olur yeni video
nice piggy bank to paint the engine. how long does such a finish last?
It is a heat-resistant paint. It has been healthy on it for a long time. This moped is not for use. I could not paint it. I painted it for visuality.
@@restoringo when I do something, I do it properly. chemical cleaning should have been used on the aluminum parts. easy to wash and dye
This is suvega bike
Yes you are right. This moped feels great to drive by the beach in the summer.
You wouldn't have a clue where I can get a cylinder head bolt for one of those motors would you
Hello. It's actually the bolt that isn't hard to find. You can find it at any hardware store.
🤫un gilardoni 43.5....😉 joli ,mais pas vraiment adapté au carbu de 10
Ma playlist de ce cylindre th-cam.com/play/PLZFv1OMI3Q_MyXOphNcoAa_Fcp0vcByXq.html
Motobacon
Wy not show how the Motor is working 😢
I will pay attention to this issue in his other videos. The working and full restoration of the engine is available at this link. th-cam.com/video/w6E17pIYf5A/w-d-xo.html
@@restoringo thanks so much because when I was younger I drive long time a mini moby from Peugeot 🥰🙏
It´s more a clean and paint video instead of a restoration.
le cylindre n'est pas d'origine sur ce moteur.
Lo ultimo que se hace es pintar un motor de aluminio, mejor que no te dediques a restaurar. El aluminio se limpia y queda mejor que cuando sale de la fabrica y ademas disipa mejor la calaor. No voy a terminar de ver el video.
Su opinión es importante para mí, gracias.
A paper headgasket? Seriously?
There is no problem for now. But copper or aluminum gasket would be better. I did not restore it for long use. It's just in the window.
c'est pas le bon cylindre, normalement c'est le arrondi et la c'est le carré
Pas le bon culindre dommage
Merci. indiquant ce que vous pensez être faux. Je suis heureux. il y a toujours quelque chose de mieux. Faisons le meilleur ensemble.