“SH” can you honestly tell me you believe there’s someone out there who will freak out at the sight of the words “self harm” but if they see it abbreviated they’ll be perfectly fine
@@bumbalaaa Unless it physically hurts you to say the abbreviation of a term that may act as a trigger for someone, the absolute least you can do as a human being is tolerate hearing “SH” instead of self harm.
with how smooth the Saturn 2’s plate is, you want those scuffs for much better adhesion, personally I would recommend getting 150-220 grit sandpaper and sanding the build plate, only if you’re experiencing adhesion issues tho, no point fixing a nonexistent problem
I want this screw s as tight as your budget me, making them as loose as possible. No I'm just kidding what I would really say is Me making a screws as tight as possible and then breaking it.
I'm so stuck... Do I buy another Prusa or do I get a resin printer? Have a 300mm voron .. a Prusa mk3s+.. and a creality. I feel like adding a resin printer would bring my little business to the next level
I get the same screen smudge crud like finger and palm prints on a phone or tablet screen! Its like that with the resin beong left sitting in vat separating after 3 or 4 days not removing it! I know on the anycubics if left for 3 or 4 days the chemical reaction splitting seems to soften up the fep causing more pull and damaging tue fep with dinted lines that then print on your model's! So I try and avoid this or if do leave it it's always stirred or ill through a test print through it just to keep things binded amd alive sorta thing! Yeah we have no proof this happens yet but I'm sure it does after replacing a week onle fep by leaving the resin in so long! Up to you obviously but on the side of caution just be aware this could possibly have a harmful effect on the cep fep can't remember the name in my saturn 2? But that screen clean the top of it it does after detail in prints! This I do know for sure is fact as I myself have tested this to see if that blurred muck on screen effects detail and it did! One of the corners of the the xp2 test prints were also smooth and fine once wiped clean! Maybe not notice it on these masks to much being all black amd soft detail
Why aren't you able to get views with anything other than the same mask that are flooding TikTok ,TH-cam ,littely even Snapchat and Facebook DO SOMETHING NEW AND ORIGINAL
@@abovewongart to be honest I'm really not I've made my point already there are more clips of that same mask than any other 3d prins clip on the internet litterly just do some original stuff Edit: I'm honestly not even that interested anymore in 3d printing just because of only this sht roaming the internet
Never used a flex plate and i will never use one,you just need to have a sharp scraper,like a razor blade,the ones that come woth the printer i always make them more sharp with a dremel,you go under a corner and the whole print comes lose
I joke about it because its a real serious thing for me. Im already way past my expiration date. Im so sorry to hear about your sister. I cut off all toxic people and I am now happy enough to become a full time artist.
@@abovewongart maybe because leveling fdm printers is a lot more annoying. I wouldn't know tho, made a bed levelling probe as my first project. Best thing ever.
The casual dark humor *chefs kiss*
Dark humor? Here? Where?
I DIDNT EVEN NOTICE THE SH JOKE UNTIL THE VIDEO ENDED
Am i the only one that doesnt know what joke everyone is talking about?
@@Macaroni1983 “just like my arms, the cuts became apparent”
@@Cj-xb4vz oh shit! How did I not notice that?!
“SH” can you honestly tell me you believe there’s someone out there who will freak out at the sight of the words “self harm” but if they see it abbreviated they’ll be perfectly fine
@@bumbalaaa Unless it physically hurts you to say the abbreviation of a term that may act as a trigger for someone, the absolute least you can do as a human being is tolerate hearing “SH” instead of self harm.
i love this guys humor, very relatable 👌🥲
My arms can relate
Smae
The ‘as tight as your budget’ is what got me 😂
I personally use a plastic spatula on mine (I was specifically instructed not to use a metal one) and my printplate is completely scratch-free
It's doesn't matter if the build plate. Has scratches. It's adheres better when it does have scratches so ...
That top half mask looks cool as hell, I'd definitely buy one if I wasn't broke as shit
Bro please upload those designs on the internet please... I fkn need that mask in my life 😂
Brooo that looks way easier than leveling a regular 3D printer
It is
with how smooth the Saturn 2’s plate is, you want those scuffs for much better adhesion, personally I would recommend getting 150-220 grit sandpaper and sanding the build plate, only if you’re experiencing adhesion issues tho, no point fixing a nonexistent problem
You know when you talk about your parents you really remind me of my parents.
I want this screw s as tight as your budget me, making them as loose as possible. No I'm just kidding what I would really say is
Me making a screws as tight as possible and then breaking it.
Thanks for the ❤
Never had an issue from the minor cuts. Do they get bad?
You should print a spatula so there aren’t as many marks
Just 3d print a spatula to take the other prints off. It doesn’t scratch the metal
My arms can’t relate but my thighs can
Don't worry dude you are amazing
Dam bro you made me smile hahahaha thank you
Did all that, plate moves like it's printing but it's creating nothing. Used Elegoo's Rook test file as well.
Brooo love the dark humor f*ck anyone that dont
Tysm! It’s me just trauma dumping where I can 😊
@@abovewongart I'm curious, you've actually dealt with SH?
The wham bam, thank you ma'am.
Hey! I say this all the time.
Much love
I can relate to this totally non dark humor resin video.
i own the mars, havent used it in a while....
So no spacer is needed for the z limit switch?
I wanna buy your mask.. but im from malaysia .. hmmm its hard to find shop that sell mask like you make or a 3d print shop 😢😢😢
print a plastic one it won't cut it and it works just as good
What's the torque rate on it case I can exceed 200 with an Alan wrench alone
Can you use mica powder in a resin 3d printer
Is that the only thing you print?
Where to buy it
Are you okay?
Can i have a mask pls im a fan of yours
I'm so stuck... Do I buy another Prusa or do I get a resin printer?
Have a 300mm voron .. a Prusa mk3s+.. and a creality. I feel like adding a resin printer would bring my little business to the next level
why are you like this
bro one time I needed 5 stitches from stabbing my self with one of those scrapers trying to get a print off.
What nippl-?!
Women thermometer
What app do you use
Nice SanDisk cruzer glide usb
wow you have an eye for detail. Amazing! This usb is so nice.
What would happen to the print if you don't level the printer?
Did you have to install the little spacer that wham bam recommends?
Yes. I don't use flex plates anymore. Too much cleaning
Thanks for the response
I get the same screen smudge crud like finger and palm prints on a phone or tablet screen! Its like that with the resin beong left sitting in vat separating after 3 or 4 days not removing it! I know on the anycubics if left for 3 or 4 days the chemical reaction splitting seems to soften up the fep causing more pull and damaging tue fep with dinted lines that then print on your model's! So I try and avoid this or if do leave it it's always stirred or ill through a test print through it just to keep things binded amd alive sorta thing! Yeah we have no proof this happens yet but I'm sure it does after replacing a week onle fep by leaving the resin in so long! Up to you obviously but on the side of caution just be aware this could possibly have a harmful effect on the cep fep can't remember the name in my saturn 2? But that screen clean the top of it it does after detail in prints! This I do know for sure is fact as I myself have tested this to see if that blurred muck on screen effects detail and it did! One of the corners of the the xp2 test prints were also smooth and fine once wiped clean! Maybe not notice it on these masks to much being all black amd soft detail
So that means I don’t have to tighten it up at all
brain : damn so much traps shiiish
Why aren't you able to get views with anything other than the same mask that are flooding TikTok ,TH-cam ,littely even Snapchat and Facebook
DO SOMETHING NEW AND ORIGINAL
Are you jealous?
@@abovewongart to be honest I'm really not I've made my point already there are more clips of that same mask than any other 3d prins clip on the internet litterly just do some original stuff
Edit: I'm honestly not even that interested anymore in 3d printing just because of only this sht roaming the internet
I had to zero gap the bolts 😅
Ay yoooo my budget pretty tight why u gotta go there 😂😂😂😂😂
😂😂😂😂
My machine doesn't wanna home because it's lifted s bit and I can't set Z to 0 because it can't home
can you make green goblin mask?
Another one
Is it mirror LCD or DLP?
I dunno.
Rasin is too expensive. How do you afford all of them?
Never used a flex plate and i will never use one,you just need to have a sharp scraper,like a razor blade,the ones that come woth the printer i always make them more sharp with a dremel,you go under a corner and the whole print comes lose
Flex plate was free. I don't like em. Too much cleaning and i can never snap it back on first try.
Has anyone not made this print
Sussy
My sister died from cutting so nice joke
I joke about it because its a real serious thing for me. Im already way past my expiration date. Im so sorry to hear about your sister. I cut off all toxic people and I am now happy enough to become a full time artist.
How often to level your build plate?
Only when I move the machine do I re level
@@abovewongart thank you! I’ve been re leveling every-time I take the build plate off to remove my prints and I wasn’t sure if that was necessary
🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣
Anything’s level somewhere
So be gentle
That's what she said 😏
Am I having a stroke
Dude make afull length nah
Gay love asmr
This makes me uncomfortable
Tight budget? Lol
Manz just made a video of the lamest shi he can say. I won't even call them jokes.
You inspire me to try stand up. I just know the first 100 shows are going to bomb.
@@abovewongart They probably will be. There's an audience for everything and every style of comedy.
LMAO
Fdm guys
👁👃👁
What about it? You need fdm settings? I just uploaded a settings tips video
@@abovewongart maybe because leveling fdm printers is a lot more annoying. I wouldn't know tho, made a bed levelling probe as my first project. Best thing ever.
I'm pretty sure this was stolen
Definitely not. This is the real AboveWongArt 💪🏼
Wait sorry I meant to comment this on a different video I must have Accidentally scrolled up
It was someone saying they made an animation that my friend made sorry
It's a hex key. Not an allen, wrench!
How not to 3d print
nips🤣
etc
dam
Bro wtf are these sound effects jfc 💀
Unscrew the nips lmfaoooo