Why are the one front tires, look like they're turned towards the tractor, while the other side was pointing straight, at the start, when its coming towards the camera
There are a lot of reasons for them. No dead furrows is the main reason. Surprisingly if you were plowing in an irregular shaped field or a large field you would take a lot more time driving to the next furrow than it takes to turn one of these rigs around. Most of the fields in our area are round or irregularly shaped, we have very few square fields. Plus with the larger drawn moldboard plows you have to have huge headlands that would have to be plowed in as well.
Even on a square field you without a reversible plow you have to do to much traveling on the headlands we had a field that took about 5 days to plow with a 6 bottom one way plow was a trick to minimize dead furrows took alot of time to lay out all of the lands
@@robertpayne2717 You and my experiences are quite a bit different. Once we laid out the lands in a field the first year, it was easy to find and re-establish them the years after. I think our steps between lands were balanced well enough that we didn't spend very much time turning around on the headlands. Just my memories. I haven't plow field since 1987...
We are injecting a soil fumigant called Telone for control of nematodes. Another thing to mention is a couple days after this was filmed we found the lower control arm ball joint on the front end worn and out of place. You can see when the tractor is coming towards the camera the tow in on the front right wheels is off center.
Yeah I noticed that first thing. I thought maybe the camera made it look that way. If that's a ILS front end, it won't be long before that entire knuckle needs replaced. Let's hope not.
We need one a these on our breaking plow. We have a couple fields that always bring up clay. When it dries it gets hard as a rock and then you cant do nothing with it.
They are applying a soil fumigant. I think it is Telone or some generic of it. Yea, I like to show that the land is different in different parts of the country. We're sandy and flat for the most part.
bonjour. bel ensemble.belle vidéo. chez moi en françe je n' ai jamais vu de charrue en planche reversible, mais je trouve ça bien. part_ contre j'aimerai savoir a quoi sert la cuve jaune que vous avez a l' avant de votre john -deere. merçi a l' avançe de me repondre en français si s'est possible.pierre france. congratulations.
Moi aussi je trouve les charrues réversibles en planche pas mal, car elle se tire hors raie et le tracteur travaille comme avec n’importe quel outil de travail du sol; mais je suis assez surpris de la très/trop grande profondeur de travail. Depuis 30 ans en Fr. on a plutôt tendance à labourer peu profond pour ne pas diluer la matière organique et ce n’est pas le cas dans cette vidéo. D’ailleurs dans toutes les vidéos avec des charrues planches reversibles cette profondeur est importante. Jamais vu de vidéos avec labour light I also find the reversible plank plows interesting. you pull this tool off-line like any other tillage tool. But I am very surprised at the very / too great depth of work. In Fr, for 30 years, we have rather a tendency to do light plowing so as not to dilute the organic matter. Besides, every time I see an identical plow in world video, the depth is always very important ...
bonjour. merci de m' avoir repondu , je vous en suis tres reconnaissant ; ses dommage que j' habite dans le sud de la france. on commençe a avoir des gros tracteurs mais pas aussi gros que les votres. merci beaucoup, pierre france. congratulations.
@@bluc7555 bonjour.de quelle region du monde etes vous, car vous me parlez en francer , et puis apres ses une langue que je ne metrise pas. mais enfin on est d' accort pour dire que la charrue reversible planche et une bonne idee,....... par contre il sont obliger de la tenir en terre assez profond car en rouland vite elle a tandence a remonter ; je penser a ça s' et pour cela que je vous fait partager mon idee ,!!!!!! cela ne veut pas dire que j' ai raison . a bientot j' espere. ...... pierre françe merci . congratulations. ............
ese arado funciona bien en suelos arcillosos pesados?,
g
racias
Why are the one front tires, look like they're turned towards the tractor, while the other side was pointing straight, at the start, when its coming towards the camera
They had a tie rod end problem that was not caught for a couple days. It was replaced and corrected.
@@terrellfarms1 kool, also i jus noticed this video is a couple years old
What is the point of a reverseable plow? That seems like a lot of lost field time reversing the tractor and plow to make the return pass.
There are a lot of reasons for them. No dead furrows is the main reason. Surprisingly if you were plowing in an irregular shaped field or a large field you would take a lot more time driving to the next furrow than it takes to turn one of these rigs around. Most of the fields in our area are round or irregularly shaped, we have very few square fields. Plus with the larger drawn moldboard plows you have to have huge headlands that would have to be plowed in as well.
Even on a square field you without a reversible plow you have to do to much traveling on the headlands we had a field that took about 5 days to plow with a 6 bottom one way plow was a trick to minimize dead furrows took alot of time to lay out all of the lands
@@robertpayne2717 You and my experiences are quite a bit different. Once we laid out the lands in a field the first year, it was easy to find and re-establish them the years after. I think our steps between lands were balanced well enough that we didn't spend very much time turning around on the headlands. Just my memories. I haven't plow field since 1987...
You can leave more room at the headlands and never stop to turn around and come back to do the headlands when finished.
We are injecting a soil fumigant called Telone for control of nematodes. Another thing to mention is a couple days after this was
filmed we found the lower control arm ball joint on the front end worn and out of place. You can see when the tractor is coming
towards the camera the tow in on the front right wheels is off center.
Thanks for the update!
i was looking at that and wondering if my eyes were playing tricks on me or if it was the camera angle.....
Yeah I noticed that first thing. I thought maybe the camera made it look that way. If that's a ILS front end, it won't be long before that entire knuckle needs replaced. Let's hope not.
I'm looking for the rakes for my switch plows who makes them?
Im wondering the same thing. Unverferth, lmc, and Harrell doesnt have them on their website
Do you know what they are spraying ??
Either Telone or Chlorapicrin. Its a soil fumigant to control insects and diseases in the soil.
front wheel allignment is way off
We need one a these on our breaking plow. We have a couple fields that always bring up clay. When it dries it gets hard as a rock and then you cant do nothing with it.
Enjoy your videos.
Thank you so much Mr. Georgia for sharing that video 😉👍🏻
Thanks for watching and commenting!
Are they plowing a fungicide in ahead of peanuts? I went to Sunbelt expo years ago and it's totally different country down there
They are applying a soil fumigant. I think it is Telone or some generic of it. Yea, I like to show that the land is different in different parts of the country. We're sandy and flat for the most part.
First time I had a chance to see a plow with a rake on it was around buena vista, Ga.
Awesome
Track rod needs adjusting my friend.
It was fixed a few days later.
bonjour. bel ensemble.belle vidéo. chez moi en françe je n' ai jamais vu de charrue en planche reversible, mais je trouve ça bien. part_ contre j'aimerai savoir a quoi sert la cuve jaune que vous avez a l' avant de votre john -deere. merçi a l' avançe de me repondre en français si s'est possible.pierre france. congratulations.
La cuve sert à transporter le fumigan qu'Il injecte ds le sol lors du labour pour tuer un nematode
Moi aussi je trouve les charrues réversibles en planche pas mal, car elle se tire hors raie et le tracteur travaille comme avec n’importe quel outil de travail du sol; mais je suis assez surpris de la très/trop grande profondeur de travail. Depuis 30 ans en Fr. on a plutôt tendance à labourer peu profond pour ne pas diluer la matière organique et ce n’est pas le cas dans cette vidéo. D’ailleurs dans toutes les vidéos avec des charrues planches reversibles cette profondeur est importante. Jamais vu de vidéos avec labour light
I also find the reversible plank plows interesting. you pull this tool off-line like any other tillage tool. But I am very surprised at the very / too great depth of work. In Fr, for 30 years, we have rather a tendency to do light plowing so as not to dilute the organic matter. Besides, every time I see an identical plow in world video, the depth is always very important ...
bonjour. merci de m' avoir repondu , je vous en suis tres reconnaissant ; ses dommage que j' habite dans le sud de la france. on commençe a avoir des gros tracteurs mais pas aussi gros que les votres. merci beaucoup, pierre france. congratulations.
@@bluc7555 bonjour.de quelle region du monde etes vous, car vous me parlez en francer , et puis apres ses une langue que je ne metrise pas. mais enfin on est d' accort pour dire que la charrue reversible planche et une bonne idee,....... par contre il sont obliger de la tenir en terre assez profond car en rouland vite elle a tandence a remonter ; je penser a ça s' et pour cela que je vous fait partager mon idee ,!!!!!! cela ne veut pas dire que j' ai raison . a bientot j' espere. ...... pierre françe merci . congratulations. ............
@Pierre je suis du nord de 🇫🇷 le texte du dessous etait simplement la traduction ggle de mon texte FR. A+ 😉
Driver does nothing anymore but make manual turns.
Another great vid!
Don’t know who set them plows up but they dang sure know what there doing
I was thinking the same thing!!! I am sure the "ice cream" dirt doesn't hurt either!
SUPER IDEA . POZDRAWIAM Z POLSKI .
Country name thanks
United States.
Great vid it's unusual to see a plough in the U.S ?
Not in the southern US.
Not many people molboard plow anymore, typically run chisels
Пиздатый плуг супер
I’d Like to see him pull that thing W that traktor here 😂 .... Anyways, this is so pleasing and relaxing in a very strange way 😉
Glad you enjoyed!
le falta mas recargue hacia atras
Super
😢😢😢😢😢😢
Perfect plowing!
Eat up them front tires
Top10
🤝❤🥇
ممثاز ممثاز