At that time I was using 4200mah lipo battery of orange company. But now I shifted to li ion battery cells. Watch my latest video and you will understand everything.
@3:50 when u checked external compass and clicked on calibration i saw that the checkbox became unchecked again..are u sure the calibration was done for external compass? also did you change J2 jumper position to enable external compass?
@@1979zeesh look this is depends which apm you are using From where I bought my apm there was a note They told when I shall use any external compass I have to remove those jumpers
Bro I have one problem that my hexacopter build on APM 2.8 is not lifting properly. It's lifting from right side only I tried verious times still same also I have done ESE calibration and checked CG before fly plz help me...
Look here I can't explain everything properly Go my instagram account and dm me Or in my fb page There I can understand your problem then I can resolve your prblm Ok?
Bhai maine usb external rgb extension indicator liya new apne pixhwak ki led ko extension krne ke liye...pr led nahi jal raha hai,maine sara connection check kr liya,sare wire ko bhi check kr liya sab sahi phir bhi external wala led nahi jal raha hai..usb connector ko usb mein connect kiya aur iic ke connector ko i2c mein connect kiya i2c splitter ke trough bt not working led nahi jal raha...
![[Watch Party] RoV Pro League 2024 Winter | with Moowan ( Bacon Time Vs Talon )](http://i.ytimg.com/vi/CCEDhu6dPN8/mqdefault.jpg)
🔥🔥🔥♥️
yeaaa boi
Bro Is the LED connection are right bcoz in my case when I insert batteries battery heats up
good job . What is the size of the battery used in milliamperes
At that time I was using 4200mah lipo battery of orange company. But now I shifted to li ion battery cells.
Watch my latest video and you will understand everything.
@@sdtech_20 🌹🌹🌹
Song name ???
Sense - moved on
@3:50 when u checked external compass and clicked on calibration i saw that the checkbox became unchecked again..are u sure the calibration was done for external compass? also did you change J2 jumper position to enable external compass?
Yes, you are right in first attempt I forgot to check ☑ the box
But next time I calibrate gps by it's compass
And also remove J2 jumpers
@@sdtech_20 you removed the jumper or u moved to position-3?also when u checked that box a dropdown appears, what u select in that?
@@1979zeesh At first time I made a mistake to check that box
Next time again I calibrate the drone
And remove the jumper before compass calibration
@@sdtech_20 as per my knowledge, removing jumper uses internal compass.. To use external, u need to put on position 3
@@1979zeesh look this is depends which apm you are using
From where I bought my apm there was a note
They told when I shall use any external compass I have to remove those jumpers
Bro bina stand ke gps use kar sakate hai
Nhi bro
Bro I have one problem that my hexacopter build on APM 2.8 is not lifting properly. It's lifting from right side only I tried verious times still same also I have done ESE calibration and checked CG before fly plz help me...
Look here I can't explain everything properly
Go my instagram account and dm me
Or in my fb page
There I can understand your problem then I can resolve your prblm
Ok?
@@sdtech_20 ok bro👍
Bhai maine usb external rgb extension indicator liya new apne pixhwak ki led ko extension krne ke liye...pr led nahi jal raha hai,maine sara connection check kr liya,sare wire ko bhi check kr liya sab sahi phir bhi external wala led nahi jal raha hai..usb connector ko usb mein connect kiya aur iic ke connector ko i2c mein connect kiya i2c splitter ke trough bt not working led nahi jal raha...
Contact me on Instagram
What is your insta id?
@@hobbytech6260 link is in description
Can I use gps without stand in my drone
Yes you can but place it in a distance from your fc
@@sdtech_20 sir what is the mean of fc
@@arunkumarak2514 flight controller
Bro...how do I program the APM for LED indicators
You don't need to program the board
Just wire the leds with it
@@sdtech_20 ok thanks bro..I have a ws2812 led stript.Do you know how to do this work with it?
@@malshanrajapaksha1786 no it will not work with apm. Because it is needed 12v power for working
@@sdtech_20 no no..this stript work with 5V
@@sdtech_20 whatsapp nnumber please