Great vid! Did you go through all 2L of brake fluid? I’m planning to do this as well but I only ordered 1L of Castrol SRF. I don’t necessarily need to flush the system, but want to make sure I have enough.
Hello, I have a question regarding usage of this manual bleeder. What happend with the air which is in pipe between bleeder and brake servo tank ?. If you fill the servo tank with fresh fluid and then tight the cap with connector you have a small amount of air under the cap. After connecting the pipe, inside the pipe is air. Then, you start pumping the bleeder and fluid from bleeder is going to the car but before fluid is air which also goes to the servo brake tank. Is it works ? Are you sure that the air is not coming to the brake system of the car. I'm thinking about purchase this type of tool but I have a little bit worries 🙃
Absolutely brilliant video. That bleeder kit is so simple yet sophisticated, looks like my old one is getting thrown in the bin as its terrible😂
Thanks For Watching! :-)
What's wrong with your bleeder kit? All it takes is a empty bottle with a bit of tubing.
Mille grazie Francesco! It just popped up on my cluster, a week ago, that i have to do the brake fluid service. Thanxs
Thank You For Watching! :-)
Great to see how simple it is to do 👍. Did you relaese the hand brake during rear wheels bleeding or left it on?
Great vid! Did you go through all 2L of brake fluid? I’m planning to do this as well but I only ordered 1L of Castrol SRF. I don’t necessarily need to flush the system, but want to make sure I have enough.
Thanks, Yes 2L
Great video. Would this process work for the G30/F90 ?
Simple and clear! Thank you
Thank You For Watching! :-)
Thank you for the good video and thank you for introducing tools related to brake oil exchange.
May there be hope and peace in Ukraine.
they don't have bmws in ukraine lol its a 3rd world country full of locals who support nazi regime.
Hello, I have a question regarding usage of this manual bleeder. What happend with the air which is in pipe between bleeder and brake servo tank ?. If you fill the servo tank with fresh fluid and then tight the cap with connector you have a small amount of air under the cap. After connecting the pipe, inside the pipe is air. Then, you start pumping the bleeder and fluid from bleeder is going to the car but before fluid is air which also goes to the servo brake tank. Is it works ? Are you sure that the air is not coming to the brake system of the car. I'm thinking about purchase this type of tool but I have a little bit worries 🙃
The air always stays on top, u can try at any fluid in the bottle, air always go up 🤷🏻♂️😂😅
What would be the correct fluid level in the reservoir?
Attention Francesco, the fluid must be DOT4 PLUS, DOT4+, must be low viscosity brake fluid...
Good vid, bleeder kit needed when you don’t have a partner to pump brakes and monitor fluid level
What is the make/model of the pressure kit you are using?
Nice thank you, I would like to do such a replacement in my 3er E91 LCi :)
Thank You For Watching! :-)
❤❤❤
Good job
Thank You For Watching! :-)
upgrade your calipers and rotors to 550 version. I upgrade mine front rotors and calipers just for 400$