Thanks for the video, man. i had mine for over 1 year, and boy, it's falling apart little by little. The codes are another thing to be knowledgeable, i am sure you know, but us clients won't. The door seal goes out quickly, with a tiny leakage. Question , buttom leakage: Would you say that's the pump with a small crack?
I had to do that this past weekend. I kept getting a h2O supply error and I had also noticed the automatic detergent dispenser wasn’t working. My washer is less than 2 years old.
@@508achannell1We just put laundry powder directly on our clothes rather than using the drawer dispenser options because we were told most modern front facing machines will have issues over time with the dispensers and hoses. The exception is when we need to use Woolite or bleach which isn't often. Powder in a box is also much better for the environment.
I recently purchased the 5.3 GE Profile Smart Ultra-fresh Front load Washer. After pulling out the dispenser detergent tray after every wash at least 1/4 cup of water leaks into the tub. I need to open and close the dispenser tray at least 3 times before the water leak completely stops. Have you heard of or encountered this issue with this unit? I recently sent a video to GE Corporate and they claim this is not a known issue with this unit. I am being advised to call a GE technician for service under my warranty plan. I sure would appreciate any information you may have on this issue.
We have one of these and water is leaking from under the top panel. I don’t think the drawer has any options to leak but I wish there was a video on what the source could be without taking the whole thing apart.
I have the same washer and it will start a cycle try a few times to lock the door and then flash DOOR across the screen but the door is locked, after waiting a few minutes the door will unlock, i've already replaced the electronic door locker and it continues to do the same, What would the next item to replace inverter board or main board thanks
Remember to theorghly inspect the striker and associated wiring. If all checks out you may need to replace your main control unit. It’s a good idea to have an issue like this properly diagnosed by a reputable appliance technician.
We have codes 18 25 23 19 3 34 38 and will spin but wont drain. Took pump out and it works outside the machine abd soits water fairly well so not sure whats wrong now. Can anyone help. We havent had a wash in a month and so over teying to figure what to replace.
I bought mine about a month ago as well. Im totally disgusted. My issue is with the smart dispense system which is the only reason I bought it. It just is constantly leaking soap and even after the spin cycle there's still soap in the seal I've sent them emails and they just keep sending me all the stuff to troubleshoot which isn't working I just want to return it I'm so pissed
@@c.a.s1900I was told to avoid using dispensers with front facing washers as much as possible because this issue is common with them. Put powder (better for machine and environment) directly in the drum on your clothes. If you must use the dispenser most would say not to use the feature you bought it for. The thing is that even without that feature it's still a better washing machine than most. I learned about all this before I bought ours and just accepted that loss from the get go because of all the other features. I felt better knowing powder is better for both the machine (avoiding dispenser) and the planet so this was a sort of calculated compromise.
I’ve owned LG appliances, Samsung appliances, GE appliances and even Maytag appliances. They don’t make them like they did 30 years ago to last 20 years. The average life expectancy on any of these appliances is roughly 5 to 7 years. I moved into my house that had generally new appliances and I’ve had to replace the built-in microwave, the stove/oven And an LG refrigerator that had a 10 year warranty that had the compressor go out in four years. LG did not wanna honor the warranty because it said that it would not be able to replace that same type of machine. After going round and round and arguing back-and-forth, they finally paid me about half of what I paid for it. so I spent $1600 on a refrigerator that four years later they replaced it with giving me a check for $920. Needless to say I don’t buy LG appliances anymore. Samsung had a lot of issues but they did send a repairman out, but from time to time we still get Issues with that appliance. Knock on wood I’m having good luck with my GE refrigerator. The only issue I have with this particular model is the speed and the size of the ice cubes are not worth the icemaker. Icemakers in general are a problem in most brand of refrigerators. It’s better to just buy a 10 or 20 pound bag of ice and keep it in a Standup freezer.
My friend and I both bought 1940s and 1950s stoves/ranges partly for this reason. They can typically be easily fixed and the parts tend to stay available because they're universal parts used in different industries. She's now looking for a vintage fridge for the same reason but I want the modern features more than she does (I want counter depth, filtered water and auto ice) so I've learned the best thing I can do is read reviews the best I can and get the longest warranty possible and cross my fingers. I also know that door ice and water have more issues so the last one I bought just drops the ice down into the freezer. It'll still go to crap sooner than later I know. Sucks. Maybe if I could afford a Sub Zero that'd help but even those probably don't last these days. Needless to say, Samsung is the worst of the worst. They say a basic Maytag is currently the most reliable fridge.
My washer will turn on and show a display but then there is a clicking sound and the display goes blank. It will continue to click after the display has gone blank. I have replaced the control board and it did not resolve the issue. What should I do next?
probably best to consult with a professional appliance repair technician in home for this one but in my professional opinion that sounds like an inverter control issue or wiring between the main control and inverter control.
I have one of these but it's blue. What a piece of crap it is. I remember back when washers were built to last, and they also did what they were supposed to.
GE WASHER FRONT LOADER: The door is locked. When I run a cycle i hear the lock click and the screen shows the door is locked, but at the end of the cycle the door remains locked. HELP
Not all cycles are meant to work depending on what the main dial is set to. For example if you have it set to delicates it won't allow hot water or faster spin options.
I'm a bit frustrated with. my purchase. I've had this exact washer for 5 months and I noticed it makes a really high pitch sound after a load.... but yesterday it was making a squeaking noise while on the rinse cycle. It was loud enough for me to hear it halfway across the laundry room. The noise was similar to an ungreased gear or something. Definitely not a good sign, especially from a 5 month old machine!
@@appliancealliance4444I have one of these to fix tomorrow I have to do an inverter I’m going to pull the front door but I was hoping to go to the bottom seems like more work
Those GE brand washer are a 💩 those are very tricky to fix and found the issues. That brand makes me crazy, nothing working at this point and not responding to find the error code. Definitely is the worst brand.
![How to Get a Developer Job - Even in This Economy [Full Course]](http://i.ytimg.com/vi/6nz8GXjxiHg/mqdefault.jpg)
![[UNCUT]“ฅนตื่นธรรม”ปะทะ“หมอปลา-ปู่มหามุนี-อั๋นโอกิ”สะเทือนกระทรวงเวทมนตร์ Iคนดังนั่งเคลียร์I10 ตค.67](http://i.ytimg.com/vi/peMD_SAkwNc/mqdefault.jpg)
Had ours for about 5 years and so far I’ve only had to replace the water inlet valves. About $50 and 30 mins of my time. So far not too bad.
🙋♂️hello..I'm from Brazil 🇧🇷..and I follow you from here...and I really like your channel...thank you very much for the video...😁👍👏👏👏
One of the best videos I seen on this model.
Thanks for the video, man. i had mine for over 1 year, and boy, it's falling apart little by little. The codes are another thing to be knowledgeable, i am sure you know, but us clients won't. The door seal goes out quickly, with a tiny leakage. Question , buttom leakage: Would you say that's the pump with a small crack?
I've had this washer for almost 4 years, only thing I've replaced is the water inlet valve assembly twice. Other than that it's been pretty solid
I had to do that this past weekend. I kept getting a h2O supply error and I had also noticed the automatic detergent dispenser wasn’t working. My washer is less than 2 years old.
@@508achannell1We just put laundry powder directly on our clothes rather than using the drawer dispenser options because we were told most modern front facing machines will have issues over time with the dispensers and hoses. The exception is when we need to use Woolite or bleach which isn't often. Powder in a box is also much better for the environment.
I recently purchased the 5.3 GE Profile Smart Ultra-fresh Front load Washer. After pulling out the dispenser detergent tray after every wash at least 1/4 cup of water leaks into the tub. I need to open and close the dispenser tray at least 3 times before the water leak completely stops. Have you heard of or encountered this issue with this unit? I recently sent a video to GE Corporate and they claim this is not a known issue with this unit. I am being advised to call a GE technician for service under my warranty plan. I sure would appreciate any information you may have on this issue.
We have one of these and water is leaking from under the top panel. I don’t think the drawer has any options to leak but I wish there was a video on what the source could be without taking the whole thing apart.
Thanks, I have this on the way. Hope to God I 🙏🏾 have a solid one 🙏🏾 that will give me at least what my Kenmore gave me, 10 years minimum
I have the same washer and it will start a cycle try a few times to lock the door and then flash DOOR across the screen but the door is locked, after waiting a few minutes the door will unlock, i've already replaced the electronic door locker and it continues to do the same, What would the next item to replace inverter board or main board thanks
Remember to theorghly inspect the striker and associated wiring. If all checks out you may need to replace your main control unit. It’s a good idea to have an issue like this properly diagnosed by a reputable appliance technician.
Ours is doing the same we replace the electric door lock ....worked then it started reading door and will not start.
How do you program the control board and the identity
We have codes 18 25 23 19 3 34 38 and will spin but wont drain. Took pump out and it works outside the machine abd soits water fairly well so not sure whats wrong now. Can anyone help. We havent had a wash in a month and so over teying to figure what to replace.
we just bought the washer today at best buys and now I am worried about it being a total waste of $$$$
I bought mine about a month ago as well. Im totally disgusted. My issue is with the smart dispense system which is the only reason I bought it. It just is constantly leaking soap and even after the spin cycle there's still soap in the seal I've sent them emails and they just keep sending me all the stuff to troubleshoot which isn't working I just want to return it I'm so pissed
@@c.a.s1900I was told to avoid using dispensers with front facing washers as much as possible because this issue is common with them. Put powder (better for machine and environment) directly in the drum on your clothes. If you must use the dispenser most would say not to use the feature you bought it for. The thing is that even without that feature it's still a better washing machine than most. I learned about all this before I bought ours and just accepted that loss from the get go because of all the other features. I felt better knowing powder is better for both the machine (avoiding dispenser) and the planet so this was a sort of calculated compromise.
I’ve owned LG appliances, Samsung appliances, GE appliances and even Maytag appliances. They don’t make them like they did 30 years ago to last 20 years. The average life expectancy on any of these appliances is roughly 5 to 7 years. I moved into my house that had generally new appliances and I’ve had to replace the built-in microwave, the stove/oven And an LG refrigerator that had a 10 year warranty that had the compressor go out in four years. LG did not wanna honor the warranty because it said that it would not be able to replace that same type of machine. After going round and round and arguing back-and-forth, they finally paid me about half of what I paid for it. so I spent $1600 on a refrigerator that four years later they replaced it with giving me a check for $920. Needless to say I don’t buy LG appliances anymore. Samsung had a lot of issues but they did send a repairman out, but from time to time we still get Issues with that appliance. Knock on wood I’m having good luck with my GE refrigerator. The only issue I have with this particular model is the speed and the size of the ice cubes are not worth the icemaker. Icemakers in general are a problem in most brand of refrigerators. It’s better to just buy a 10 or 20 pound bag of ice and keep it in a Standup freezer.
My friend and I both bought 1940s and 1950s stoves/ranges partly for this reason. They can typically be easily fixed and the parts tend to stay available because they're universal parts used in different industries. She's now looking for a vintage fridge for the same reason but I want the modern features more than she does (I want counter depth, filtered water and auto ice) so I've learned the best thing I can do is read reviews the best I can and get the longest warranty possible and cross my fingers. I also know that door ice and water have more issues so the last one I bought just drops the ice down into the freezer. It'll still go to crap sooner than later I know. Sucks. Maybe if I could afford a Sub Zero that'd help but even those probably don't last these days. Needless to say, Samsung is the worst of the worst. They say a basic Maytag is currently the most reliable fridge.
h2o, and it's not water line/pressure/valves. What is this?
My washer will turn on and show a display but then there is a clicking sound and the display goes blank. It will continue to click after the display has gone blank. I have replaced the control board and it did not resolve the issue. What should I do next?
probably best to consult with a professional appliance repair technician in home for this one but in my professional opinion that sounds like an inverter control issue or wiring between the main control and inverter control.
Can you make a video of it
I have one of these but it's blue. What a piece of crap it is. I remember back when washers were built to last, and they also did what they were supposed to.
Nothing is built to last anymore. Goes bad after warranty expires.....
I have gfw550ssn2ww no power ? It plugged securely into a working outlet
Bought a new unit. It makes the irritating whistle sounds when the door sensor is triggered.
I wish we can see the wash action.
Good evening
What part of the country are you in?
GE WASHER FRONT LOADER: The door is locked. When I run a cycle i hear the lock click and the screen shows the door is locked, but at the end of the cycle the door remains locked. HELP
How long do you wait? You could try turning washer power on then off again quickly?
My ge washer dial won’t select all wash cycles and won’t spin fast what could it be?
Not all cycles are meant to work depending on what the main dial is set to. For example if you have it set to delicates it won't allow hot water or faster spin options.
Hello some body knows about tge ultra fresh vent cycle? The time is setting automatically? How long is it?
8 hours of starting and stopping. They claim no real impact on your electric bill.
I'm a bit frustrated with. my purchase. I've had this exact washer for 5 months and I noticed it makes a really high pitch sound after a load.... but yesterday it was making a squeaking noise while on the rinse cycle. It was loud enough for me to hear it halfway across the laundry room. The noise was similar to an ungreased gear or something. Definitely not a good sign, especially from a 5 month old machine!
Call GE have a service tech look at it. 5 months old should be under warranty.
Awesome video thanks
No problem 👍
@@appliancealliance4444I have one of these to fix tomorrow I have to do an inverter I’m going to pull the front door but I was hoping to go to the bottom seems like more work
Furture readers: Plug any front load washer into a surge protector
Why?
That will causes a fire if it overloads and gets hot.
@@JAVASTAR89 What? They actually make appliance surge protectors.... the control boards are very sensitive and surge protectors help
Those GE brand washer are a 💩 those are very tricky to fix and found the issues. That brand makes me crazy, nothing working at this point and not responding to find the error code. Definitely is the worst brand.
It should be ilegal to sale this tope of items to consumers
Don’t buy GE they are hard to fix
Insane 1000 to fix. A new one is 1000 . No thanks. Cant fix buy new one..