วีดีโอ

Had mine for 5 years. I use it for business use for massage therapy so its used a lot. Just had to change the water inlet valves which was easy. Only other issue I've had is the water tray not draining where the softener goes.

I have. Gfw850 washer and it still wont drain i replaced the drain pump and the inverter board already and still wont drain i havent had the washer 3 years an paid wayy to much apparently any other suggestions an it changed the error codes tob38,18

Mine still works fine after 5 years. Now im starting to jear a load banging noise, like its being hit with a hammer.

We own one, a common problem is that the roof of the detergent dispenser somehow gets the water dispensers clogged. When that happens the water does not spray straight down, but off to the side, and then drips on the floor. I had to figure it out myself because when we had a repairman come he came up with some expensive item that would not have fixed the issue. The current issue is loud squeaking when running an average sized load. We think it's the shock absorbers.

Any option to drain test without having to wait 15 god damn minutes ?

My front load is just over a year old. I wipe the gasket and leave the door open after use. Well, it leaks detergent from the gasket. What do I do?

Surprisingly, I had the bearings in the motor go bad on this machine for me. Need a new motor.

I'd choose a LG front loader instead of any speedqueen front loader. We had the SQ FF7 front loader and it was leaking from the first day. Took months waiting around for them to get a replacement and then they told us some BS about tilting it back a bit to avoid leaking. Called BS on them and then they failed to deliver the replacement, we said kick rocks and bought a highly rated and respected LG front loader. Yale appliances also doesn't think speedqueen is necessary because there are so many good front loaders and SQ is double or triple the price. Not worth it. Top loader, I'd choose speedqueen just for the only fact that every other top loader is subpar (read trashy) currently.

Anyone know why this washer keeps locking up and saying canceled at the end of each cycle

I have this washer and I get a very loud screeching noise while it’s filling mid cycle. It’s like a cavitation type screeching noise. Any clues to what that is?

I need an opinion. I have a 2017 front loading GE washer and I've noticed that the door is not locking properly. Occasionally it will latch and then it unlatches and latches again to start the cycle. But today I heard it just clicking quietly and I had to close the door and open it a few times power it off or it even to engage at least once and it's very hit and miss. I don't know if it's possible to contact you for further details. I am trying to get it corrected but I am a little annoyed as it was pretty much brand new when I received it back in 2021.

I have a GE washer and I already fix it like 4 times now it stop working because the door won’t lock I already replaced sensor 3 times keeps giving me the same error does some now what could be wrong with it so I can fix it ?

Can you make a video of it

How do you program the control board and the identity

Those GE brand washer are a 💩 those are very tricky to fix and found the issues. That brand makes me crazy, nothing working at this point and not responding to find the error code. Definitely is the worst brand.

Speed queen isn’t available for me What would be a close second? Kenmore Maytag LG Mabe Are my options

GE WASHER FRONT LOADER: The door is locked. When I run a cycle i hear the lock click and the screen shows the door is locked, but at the end of the cycle the door remains locked. HELP

I have gfw550ssn2ww no power ? It plugged securely into a working outlet

Speed Queen. Pfft. Glad to see they still make something for the flip phone crowd. And charging them dearly for it. I'll take my new LG with modern electronics, features, capacity, at half the price. My last LG went 17 years no problems. I'd be plenty happy with 15.

I've had this washer for almost 4 years, only thing I've replaced is the water inlet valve assembly twice. Other than that it's been pretty solid

We have one of these and water is leaking from under the top panel. I don’t think the drawer has any options to leak but I wish there was a video on what the source could be without taking the whole thing apart.

This is 700 RPM, I believe my Whirlpool WTW4900BW0 washer is 800 RPM

I hear a little bearing noise, probably not worth repairing. Not a loud bearing noise either. I watched a video where the washer leaked. That’s probably what caused it to wear out, because water leaked into the bearing. It’s not too loud, my VMW has a really loud bearing.

Hello some body knows about tge ultra fresh vent cycle? The time is setting automatically? How long is it?

I have done 3 out of those 5. Next up will be the pump and motor pastic pieces you mentioned. Ours is a 2010 version. How long do think she can last.

Is a gas or electric dryer better?

We have codes 18 25 23 19 3 34 38 and will spin but wont drain. Took pump out and it works outside the machine abd soits water fairly well so not sure whats wrong now. Can anyone help. We havent had a wash in a month and so over teying to figure what to replace.

I’ve owned LG appliances, Samsung appliances, GE appliances and even Maytag appliances. They don’t make them like they did 30 years ago to last 20 years. The average life expectancy on any of these appliances is roughly 5 to 7 years. I moved into my house that had generally new appliances and I’ve had to replace the built-in microwave, the stove/oven And an LG refrigerator that had a 10 year warranty that had the compressor go out in four years. LG did not wanna honor the warranty because it said that it would not be able to replace that same type of machine. After going round and round and arguing back-and-forth, they finally paid me about half of what I paid for it. so I spent $1600 on a refrigerator that four years later they replaced it with giving me a check for $920. Needless to say I don’t buy LG appliances anymore. Samsung had a lot of issues but they did send a repairman out, but from time to time we still get Issues with that appliance. Knock on wood I’m having good luck with my GE refrigerator. The only issue I have with this particular model is the speed and the size of the ice cubes are not worth the icemaker. Icemakers in general are a problem in most brand of refrigerators. It’s better to just buy a 10 or 20 pound bag of ice and keep it in a Standup freezer.

Had ours for about 5 years and so far I’ve only had to replace the water inlet valves. About $50 and 30 mins of my time. So far not too bad.

From all the research I've done and what I've personal heard myself from an appliance technician, there is no competition for the speed queen brand. We just bought the speed queen FF7009BN front loader and we are hoping it will show us why their brand is so praised. That being said, the first day we use it, it has minor leakage in two areas, the detergent drawer and the bottom of the tub door. They said they will likely have to send a replacement unit, because that's what they had to do last time, you can't fix it on the spot. Not the best introduction to the brand, but if the replacement does well, I will be at ease. If the replacement fails us, I will surely be pissed off.

do u think heat pump dryers or even all in ones are better then the trasditional electric dryer speed queen uses?

h2o, and it's not water line/pressure/valves. What is this?

I thought LG originally made the direct drive motor?

Don’t buy GE they are hard to fix

I recently purchased the 5.3 GE Profile Smart Ultra-fresh Front load Washer. After pulling out the dispenser detergent tray after every wash at least 1/4 cup of water leaks into the tub. I need to open and close the dispenser tray at least 3 times before the water leak completely stops. Have you heard of or encountered this issue with this unit? I recently sent a video to GE Corporate and they claim this is not a known issue with this unit. I am being advised to call a GE technician for service under my warranty plan. I sure would appreciate any information you may have on this issue.

Insane 1000 to fix. A new one is 1000 . No thanks. Cant fix buy new one..

It should be ilegal to sale this tope of items to consumers

Where is the filter access on the Maytag do I have to take the front off to get to it?

we just bought the washer today at best buys and now I am worried about it being a total waste of $$$$

running a speed queen washer and dyer that's 40 years old never any issues. i wouldn't buy any other brand from what iv'e heard people saying there going through appliances every 5-6 years. id'e run out and buy another speed queen and pay the speed queens tax!!!!

Awesome video dude! Thanks a million

How do you disassemble this style dryer to access thermal fuse?

Bought a new unit. It makes the irritating whistle sounds when the door sensor is triggered.

This is a great video.

Where did you buy your new switchboard at?

Just bought a TR 5 Speed Queen washer and DR 5 drier. Yes sir they were MPR costly. But the 5 year warranty and build quality won me over. Plus if we had went top of the line GE or other the cost was not that far apart. Good video

Thanks for the video, man. i had mine for over 1 year, and boy, it's falling apart little by little. The codes are another thing to be knowledgeable, i am sure you know, but us clients won't. The door seal goes out quickly, with a tiny leakage. Question , buttom leakage: Would you say that's the pump with a small crack?

Speed Queen would Be My Choice

Nice job. Thanks for sharing. what was the tool you used to connect 1/4" flare port to the end of tubing to flush lines with Nitrogen?

Thanks, I have this on the way. Hope to God I 🙏🏾 have a solid one 🙏🏾 that will give me at least what my Kenmore gave me, 10 years minimum