I did the procedure in the video and once I replace the immobilizer the code went away. I also change the starter. I hadn’t gotten the code back. Thanks 🙏
I have a 2005 Infiniti G 35 with the same issue with one start up put a new CPU had a locksmith program at it started up on the fifth time it went into lock mode what tool did you use to reprogram the key
Recently got a z as a project thatll turn into a daily and I’ve been working and replacing things on it but recently the ECU went out. Got a new ecu and in lock mode now. Waiting on a friend to see if they can reprogram it and if not I’m lost because now no check engine lights are on besides being in lock mode
Hey not too long ago all my door buttons stopped working, the locks the windows and the windows don’t roll down with the key turned either, any idea what it could be?
also my ignition lock is acting up just like yours in the video and it wont unlock can i do this procedure like that or you have any methods to unlocking it im stuck right now and i could really use help also subbed for the useful content
I was scared of that too, when you put in a new bcm the steering lock no longer recognizes the key so it won’t unlock. When u use the software and put in the code to program the bcm it unlocks the ignition so you can program the keys
What was the process you went thru when using data scan I’m going thru the same problem and got the bcm coming tomorrow and have data scan downloaded I’m just wondering do you program the bcm under the ecu tab or the bcm tab
Hey bro I’m having this same issue I already replaced the IPDM but still nothing the security light stays & no crank. The only thing difference is that my fans stay on when you turn the key to the “On” position but the security light stays on but does not crank over. For some reason when I hook up the scanner it also doesn’t read it I’m not sure if you had the same issue
From back when I was researching my issue, everyone on the forums told me that if the fans are on like that it means your ECU is bad. You can send yours to get rebuilt or get another one but it has to be programmed to ur VIN.
@@jizzyboi9211 I had the same issue. I changed the IPDM but no luck but later found out why Unfortunately my circuit relay blew out first so when my ECM fuse blew everything else did too going all the way back. I ended up taking it to my mechanic & Infiniti. No scanner would pick up signal because everything going back got fried. They recommended I change out everything in order to hopefully get signal including harnesses in order to reprogram everything. In your case I would start with checking fuses first on your IPDM. If no luck then you have to work backwards like how I did. Hopefully yours isn’t like mine !
You can also turn the key to the on position for 5 seconds and then off. Repeat it until the light goes away. Take out the key unlock and lock the car and it should start. Repeat if it doesn’t
With these cables you have to go to the windows settings and see which com it is it can be com1-2-3 or 4. Then you go in the app setting and change it to that for the app to communicate properly
I have a 06 G coupe and had a weak battery and held off getting a new one it died and the windows dropped from the seal...well between the days of low voltage and rain...now my keyfobs dont work window doesnt blip up and it just cranks and doesnt start. Noticed that random stuff was coming on even headlights and stuff! I removed the BCM and am letting it air out but ill prob have to get one off ebay. So same part number, usb off amazon and download the program and im good? It programs the new BCM to the car and then the BCM to the keys i assume? thanks
Yo, thanks for the video. I’m having a similar issue with 07 Nissan Murano. Dealer won’t touch without 15 hours worth of labor😅. Do you happen to have a link to a proper Datascan software for a Murano?
What’s up guys, I’ve been having this issue as well, how ever I bought the stuff needed, program the key, light goes off and a few seconds later, light stays on and car won’t start
Yo will this work with the 09 370z? I engine swapped my car with a healthy engine and my car basically got locked out. I sent my ECU to Uprev and had them disable the NATS system. My keys still lock and unlock but the BCM from what i assume is the culprit. Thanks
Hey man where can I get that app and connector,I'm having the no key issue as well I've paid for a new key to last week but the battery wasn't plug to car so couldn't even register now I'm trying avoid re calling them
Im literally in this very position, cranks, will fire up with starter fluid, but my immobilizer light is on, trunk wont pop, and wont fire up. Its cut my injectors and fuel pump out
09 g37s, does not start no dash no crank, headlights turn on and door lights, red key light flashing on dash while off, I can unlock and lock the doors can this be the issue ? I’ve replaced the ipdm and steering lock module have not diagnosed the bcm
Anyone in lock mode here is what works key on but don't start count to 5 turn off then back on count 5 turn off. Repeat until the red security light shuts off then start .
That’s an interesting swap, these cars have different bcms from year to year so idk if the bcm would talk to the new ecu, u might want to try and get the bcm and the keys, ignition etc from ur de car as well
your good, someone with an older fx directed me to this so I know it worked for their car. If you have the push to start button you might need the next gen data scan like G37/ 370z.
Guys, if NDS II software cannot connect to original BCM saying 'program failed' using 4 digit NATS pin code generated from the given website after entering BCM HEX pin code, it does not mean BCM is bad. For G35 2003-06 the 2003 same engine been used and default NATS pin code is 5523. Try using pin 5523 to reprogram keys. The same issue happened with me , I thought BCM went bad however it was not the case.
Mine do, (just swapped my chassis harness and i am swapping my bcm tonight 04 6mt g35 coupe) my wiring harness got wet from a crack in the floor causing my 10 amp running through my bcm to blow so hopefully replacing that will do the trick i will let you know if that code works for me.
My 06 g35 auto battery terminal was messed up replace it and got locked out,had nissan reprogram key and got locked out again 😫😫😫 hope this work thanks man
@@seizethespeed thanks man, I'm looking to buy the cable and software right now but the cable link you have in description says audi and vw or am I reading that wrong?
Yeah I have windows 10, 40 is just the software. You pay and they email you the key. Then download the software from the datascan website. The OBD Cable I bought from Amazon since it was cheaper
I did an engine swap on my 04 g35 coupe and I lost the ecu but got an exact ecu and my G isn't even cranking on or the security red light isn't on at all. I had a lock smith check it out and he couldn't program the key he said he couldn't get pass the security system and my ob2 can't scan any issues what would you recommend thanks so much.
From what I’ve heard, the ecus on these cars need to also be programmed when u go from one car to another. There’s places online you send it to. That might be a good place to start
Hello, thank you very much for posting this video I have the exact same issue with my car just the key light is on the dash aswell and I have the 2 top codes on my car, when the locksmiths came they couldn’t connect to the car to program the keys so I took it to the dealership, they told me my ipdm was busted so I got a new one and I rewire d it and still the same issue, I only have the key w/ the transponder inside, do you recommend me to so same as you did, thank you very much in advance!
If they can’t communicate with the bcm chances are your experiencing the same thing I did. I can’t say for sure but there’s a high chance that following the steps I showed will solve your problem
@@seizethespeed thanks for the response I really appreciate it!, btw does any obd2 scanner to usb work, and also I can still connect my regular scanner to see the codes. And lastly how do I know if it’s that bcm that’s not being able to communicate to, thanks again!
@@yousefabujumaiza2267 I’m not sure but the one I used was mentioned in the softwares website that’s why I used it. Also for me it was the fact that everytime we tried to reprogram my keys no device could communicate with the bcm so that’s how I knew. U can see this in the video too where the first time I try it with the old bcm and no luck then I swap to the new one and it lets me program it.
hey bro i just bought a 05 g35 sedan and the dude i bought it from says he programs the car and it looses program after 3-4 times and won’t start and said it’s the ignition switch. Do you think i should replace the ignition switch or just do this
I’ve heard that on the cars without keyless start, you can do something to reset the system or bypass the security and then it’ll start for the next couple times he might be doing that. The issue is still somewhere within the immobilizer. In this case it could be the chip inside ur key. I’d say try getting a new key programmed to the car first and see if that fixes it. Probably the cheapest first step.
I think about 120 for a used one from eBay plus what I paid for the software and the wire to program the new bcm, the link to that stuff is in the bio.
Can this condition happen after a motor swap. Say car sat powered down for 5+ mo no juice to system. Swap In new motor. Timing good mechanical good. No start.??
That’s what happened to me, I got my engine swap after locking up my last motor…. But the car wouldn’t start. I still two ecm’s im assuming my stock one and one from the donor engine. Brought it to the dealer to get the key program but they couldn’t, said I needed to replace the wiring harness I think that was some BS tho…
Thank you! I’ve been searching for a solution and tried many things. I will try do this method as soon as possible
How did it go?
Did ut work??
I did the procedure in the video and once I replace the immobilizer the code went away. I also change the starter. I hadn’t gotten the code back. Thanks 🙏
I have a 2005 Infiniti G 35 with the same issue with one start up put a new CPU had a locksmith program at it started up on the fifth time it went into lock mode what tool did you use to reprogram the key
Recently got a z as a project thatll turn into a daily and I’ve been working and replacing things on it but recently the ECU went out. Got a new ecu and in lock mode now. Waiting on a friend to see if they can reprogram it and if not I’m lost because now no check engine lights are on besides being in lock mode
any luck? having the same issue
Hey not too long ago all my door buttons stopped working, the locks the windows and the windows don’t roll down with the key turned either, any idea what it could be?
does this work with a bluetooth OBD2 scanner or does it have to be usb cable?
When you programmed the keys, did you get two PIN codes from the website, one old and one new? And if so, which one did you use?
I’m having the same issue, thanks for this!
Glad I could help!
Did you end up fixing it?
Thanks bro it actually worked.
Hey great video! Can you outline the exact steps you went through in NDS II to program the key?
also my ignition lock is acting up just like yours in the video and it wont unlock can i do this procedure like that or you have any methods to unlocking it im stuck right now and i could really use help also subbed for the useful content
I was scared of that too, when you put in a new bcm the steering lock no longer recognizes the key so it won’t unlock. When u use the software and put in the code to program the bcm it unlocks the ignition so you can program the keys
If it dosent unlock at that point you might have a bad ignition lock
What was the process you went thru when using data scan I’m going thru the same problem and got the bcm coming tomorrow and have data scan downloaded I’m just wondering do you program the bcm under the ecu tab or the bcm tab
Did you figure it out?
im having the same issue. hopefully this works
i bought the data scan and i’ve been waiting for it for a minute. what do i do
Biggest fear for z and g owners
no cap
Can this work on a 2001 Infiniti i30?
Hey bro I’m having this same issue I already replaced the IPDM but still nothing the security light stays & no crank. The only thing difference is that my fans stay on when you turn the key to the “On” position but the security light stays on but does not crank over. For some reason when I hook up the scanner it also doesn’t read it I’m not sure if you had the same issue
From back when I was researching my issue, everyone on the forums told me that if the fans are on like that it means your ECU is bad. You can send yours to get rebuilt or get another one but it has to be programmed to ur VIN.
My fans stay on too but my car cranks but won’t start the security light also is on any ideas?
@@jizzyboi9211 I had the same issue. I changed the IPDM but no luck but later found out why Unfortunately my circuit relay blew out first so when my ECM fuse blew everything else did too going all the way back. I ended up taking it to my mechanic & Infiniti. No scanner would pick up signal because everything going back got fried. They recommended I change out everything in order to hopefully get signal including harnesses in order to reprogram everything. In your case I would start with checking fuses first on your IPDM. If no luck then you have to work backwards like how I did. Hopefully yours isn’t like mine !
If your IPDM has corrosion then I would swap out the IPDM !
@@Srt_1017 the scanner also doesn’t connect to my car lol this car gives me a headache
You can also turn the key to the on position for 5 seconds and then off. Repeat it until the light goes away. Take out the key unlock and lock the car and it should start. Repeat if it doesn’t
That method doesn’t work on keyless start cars
Got a new bcm from Infiniti and Nissan datascan just says ecu error but it connects to my ecu fine just won’t let me program keys
Did you end up fixing it ?
I keep getting the message from vdcs-lite of no response from controller as well as the message from NDS2 can not open com1 any idea how to fix this?
With these cables you have to go to the windows settings and see which com it is it can be com1-2-3 or 4. Then you go in the app setting and change it to that for the app to communicate properly
do i have to or need the nissan datascanII from concept z to get this to work?
does it have to be a window computer?
I have a 06 G coupe and had a weak battery and held off getting a new one it died and the windows dropped from the seal...well between the days of low voltage and rain...now my keyfobs dont work window doesnt blip up and it just cranks and doesnt start. Noticed that random stuff was coming on even headlights and stuff! I removed the BCM and am letting it air out but ill prob have to get one off ebay. So same part number, usb off amazon and download the program and im good? It programs the new BCM to the car and then the BCM to the keys i assume? thanks
yeah pretty much follow the process in the video and you should be good! id suggest making sure your ECU is also in good health. Goodluck!
@@seizethespeed So does this also program the key fobs to the new BCM or is that a separate process?
Yo, thanks for the video. I’m having a similar issue with 07 Nissan Murano. Dealer won’t touch without 15 hours worth of labor😅.
Do you happen to have a link to a proper Datascan software for a Murano?
this works on a 350z too ?
Would this work for 370z and g37
It should but i believe you need a different version of the software.
i got the BCM working but can’t get the key fob working. When i insert the key rapidly in the ignition nothing happens
What’s up guys, I’ve been having this issue as well, how ever I bought the stuff needed, program the key, light goes off and a few seconds later, light stays on and car won’t start
Did you fixed bro? I have the same problem
Does this method work for a 2007 Infiniti G35 Sedan? Its a VQ35HR with a keyless entry.
You would need the next version of the the data scan software for the cars that have push to start, the process is similar though
Yo will this work with the 09 370z? I engine swapped my car with a healthy engine and my car basically got locked out. I sent my ECU to Uprev and had them disable the NATS system. My keys still lock and unlock but the BCM from what i assume is the culprit. Thanks
It should be the same process, but the cars with push to start use data scan 3 I believe.
Hey man where can I get that app and connector,I'm having the no key issue as well I've paid for a new key to last week but the battery wasn't plug to car so couldn't even register now I'm trying avoid re calling them
The link for everything you need is in the video description!
@Seize The Speed thanks boss so if I have straight push button how would I get it into that on position mines is stuck in lock
i got the same exact model, color, build, ignition switch and all, thank you
Glad I could help
Same but mine is the revup cd00a and a black interior but I swapped to a de and it was painted 😂
did you have to setup the cable to a driver? or just opened up nds2?
I did, sometimes u get lucky and it’s the correct one, I had to go manually change mine
im having the issue of the connection being failed in the NDSII software when im trying to connect any way to fix this? thanks.
ur bcm or ecm depends on your problems
couldnt download the software on a chrome book i payed for a locksmith to come out but he couldnt do nothing with the key ignition being locked
Yes you need windows for the software to work.
Im literally in this very position, cranks, will fire up with starter fluid, but my immobilizer light is on, trunk wont pop, and wont fire up. Its cut my injectors and fuel pump out
09 g37s, does not start no dash no crank, headlights turn on and door lights, red key light flashing on dash while off, I can unlock and lock the doors can this be the issue ? I’ve replaced the ipdm and steering lock module have not diagnosed the bcm
Could it be the bcm or the key fob itself ?
Have you tried it? Think I have the same issue with no crank, unlike the video where he had crank
aye bro i put the pin number but didn’t get a 20 digit code bro what do i do
Anyone in lock mode here is what works key on but don't start count to 5 turn off then back on count 5 turn off. Repeat until the red security light shuts off then start .
Doesn’t work on keyless cars like mine
Quick question bro so I think my bcm is bad but not sure. Got a misfire code are these related? Would this program work for g37
Bcm shouldn’t have anything to do with your engine functions that’s controlled by your ecu. You need the next version of this software for the G37
When do I enter the code into the software?
I'm going to do a revup to de swap and I'm anticipating to have this issue. You say it has to be the original ecu or can I use the de ecu?
That’s an interesting swap, these cars have different bcms from year to year so idk if the bcm would talk to the new ecu, u might want to try and get the bcm and the keys, ignition etc from ur de car as well
Where did You get that nissan data scan 2? Tool
Link is in the description
@@seizethespeed sorry thanks got same issiue with fx50 2011 it is not listed it will work with them
your good, someone with an older fx directed me to this so I know it worked for their car. If you have the push to start button you might need the next gen data scan like G37/ 370z.
@@seizethespeed Yes I got start stop Button and keyless entry so it is like 370z
Does the software require credits per car? Or do you get to use it more than once?
You can use the software on different cars. You just pay for it once
Guys, if NDS II software cannot connect to original BCM saying 'program failed' using 4 digit NATS pin code generated from the given website after entering BCM HEX pin code, it does not mean BCM is bad.
For G35 2003-06 the 2003 same engine been used and default NATS pin code is 5523.
Try using pin 5523 to reprogram keys.
The same issue happened with me , I thought BCM went bad however it was not the case.
Thank you man, your comment helped me get my G running again. Much appreciated. I tried several codes, but the one you provided worked
@@danielr3177We’re your fans blowing whenever you had your key on?
Mine do, (just swapped my chassis harness and i am swapping my bcm tonight 04 6mt g35 coupe) my wiring harness got wet from a crack in the floor causing my 10 amp running through my bcm to blow so hopefully replacing that will do the trick i will let you know if that code works for me.
@@drewzig7140
when you had the immobilizer problem did you hear the fuel pump wine
The nats won't disable the fuel pump or starter, It does disable injector pulse.
My 06 g35 auto battery terminal was messed up replace it and got locked out,had nissan reprogram key and got locked out again 😫😫😫 hope this work thanks man
Hope it helps man, It was a pain. If the car went into lock mode I’d say your bcm might be bad. Goodluck!
@@seizethespeed thanks man, I'm looking to buy the cable and software right now but the cable link you have in description says audi and vw or am I reading that wrong?
No your right, it’s a generic cable, I was skeptical at first too but that’s the same cable they use for that software
I have the same issue rn bro will this work on windows 10 and is the 40$ purchase a USB?
Yeah I have windows 10, 40 is just the software. You pay and they email you the key. Then download the software from the datascan website. The OBD Cable I bought from Amazon since it was cheaper
@@seizethespeed they email it right not ship?
Yes
@@seizethespeedOk so windows 10 does work? I thought consult 2 only worked with windows 7?
it worked fine for me @@bridgemonstar7795
No one wants to work on the 05 gs why 🤦🏾
I did an engine swap on my 04 g35 coupe and I lost the ecu but got an exact ecu and my G isn't even cranking on or the security red light isn't on at all. I had a lock smith check it out and he couldn't program the key he said he couldn't get pass the security system and my ob2 can't scan any issues what would you recommend thanks so much.
From what I’ve heard, the ecus on these cars need to also be programmed when u go from one car to another. There’s places online you send it to. That might be a good place to start
Hello, thank you very much for posting this video I have the exact same issue with my car just the key light is on the dash aswell and I have the 2 top codes on my car, when the locksmiths came they couldn’t connect to the car to program the keys so I took it to the dealership, they told me my ipdm was busted so I got a new one and I rewire d it and still the same issue, I only have the key w/ the transponder inside, do you recommend me to so same as you did, thank you very much in advance!
The place where I turn on the car spins aswell with no key inside of it, not sure if that’s how it works
If they can’t communicate with the bcm chances are your experiencing the same thing I did. I can’t say for sure but there’s a high chance that following the steps I showed will solve your problem
@@seizethespeed thanks for the response I really appreciate it!, btw does any obd2 scanner to usb work, and also I can still connect my regular scanner to see the codes. And lastly how do I know if it’s that bcm that’s not being able to communicate to, thanks again!
@@yousefabujumaiza2267 I’m not sure but the one I used was mentioned in the softwares website that’s why I used it. Also for me it was the fact that everytime we tried to reprogram my keys no device could communicate with the bcm so that’s how I knew. U can see this in the video too where the first time I try it with the old bcm and no luck then I swap to the new one and it lets me program it.
@@seizethespeed okay sounds good I’ll get the cable and see what happens, thanks man!
hey bro i just bought a 05 g35 sedan and the dude i bought it from says he programs the car and it looses program after 3-4 times and won’t start and said it’s the ignition switch. Do you think i should replace the ignition switch or just do this
I’ve heard that on the cars without keyless start, you can do something to reset the system or bypass the security and then it’ll start for the next couple times he might be doing that. The issue is still somewhere within the immobilizer. In this case it could be the chip inside ur key. I’d say try getting a new key programmed to the car first and see if that fixes it. Probably the cheapest first step.
You replace your bcm?
Yes I ended up getting a used one
@@seizethespeed might have to do that how much was the part + replacement
I think about 120 for a used one from eBay plus what I paid for the software and the wire to program the new bcm, the link to that stuff is in the bio.
It worked for me too
Can this condition happen after a motor swap. Say car sat powered down for 5+ mo no juice to system. Swap In new motor. Timing good mechanical good. No start.??
That’s what happened to me, I got my engine swap after locking up my last motor…. But the car wouldn’t start. I still two ecm’s im assuming my stock one and one from the donor engine. Brought it to the dealer to get the key program but they couldn’t, said I needed to replace the wiring harness I think that was some BS tho…
You can get ecu/bcm/ignition combos on eBay and try that
@@nehemiahnelson7475 i have the same problem after an engine swap from a running donor car, did you ever fix your issue
@@jaimea6012 haven’t had the chance to look into it
@@nehemiahnelson7475need a update, have this exact issue with my 370z
Just ordered the Usb obd connector, hoping I can get this to work!
Did It Work?
@brazybabynii6198 yup it worked!
@@aidenarnoldy8037 how did u set up the cable
Think I'm having this issue on my g35
This is me rn , the beginning of the video.
Man I just bought this mf cable with prime I’m trying this this weekend I swear if it doesn’t work I’m selling my G 😭
Update??…
Infiniti / Nissan have crap for quality. Stay away from these vehicles unless you want to deal with issues..