@@HawaiiDetailingman I love your videos. Keep them coming. We love your attention to detail. The video we just watched with your new red Tesla. You wrote descriptive info in the bottom corners as you worked through the steps while music played. Even though you spoke of the item you were using next as well as what you were doing. We love that you show us the product or bottle wheee we can easily see it. Your awesome. What vacuum accessories do you use. What do you use to vacuum your Swiss trax? Does this have more power than the OG vac and if it does we are not going to take it that your putting it down. We just want to know what the facts are. We like the look of this vac and its features more than the OG vac so far from what we have seen. Lastly. You spoke of the studs and the 2x6 boards between the studs. I have the same Kranzle you have and their shelf. I did not have 2x6 or 2x8 boards between my studs. I do have my system mounted on studs that are spaced 16” apart and the studs themselves are 2x6 studs. There are no support boards between the 16” spaced studs. On top of the studs are 1/2” plywood and then 5/8” drywall. I have 4” lag screws holding the shelf and the coxreel as well as the CR spotless all in the same stud bay. I should be ok right. Everything is mounted on both studs 16” apart.
Hello! Recently found your channel. I bought a house last year that has a dedicated central vac outlet in the 5 car garage (along with hot/cold water, radiant heat, floor drains and 20 ft ceilings). The guy who built it really knew what he was doing. I have lots of room to trick it out so your videos will be very helpful. Thanks!
I am in the business and that's a clean set up. Spray painting the pipe to match the walls is a nice touch. They have retractable hose systems widely available now that eliminate the need for a spool set up but what you have is pretty sweet.
I love your detailing product reviews and tips but what i love most is that your hilarious! I laugh everytime you laugh when you say something that's funny!
Im looking for a high performance vacuum for my shop/garage. But with the huge amounts of "dirt", saw dust, and other swarf, Im pretty sure I will need some type of cyclone separator, to bypass most of it before it hits the vacuum. Great video
Thanks. This is the best vacuum I could find. Suction is absolutely insane. Looks cool too. At least I think so. Hahaha. Doesn’t require filter bags either which is rare and for me was a must have.
Great video! Amazing install! I wasn't aware of this brand. I have a crappy Bissel wallmount garage vac, and it just gets worse and worse as time goes on. This video absolutely convinced me that the Nadair is the way to go. The hose reel setup is brilliant. Love the passion you have for the fine work you've done!
Hi there! Hey I have a mobile grooming trailer that came with the Bissell garage pro wall mounted vac with the build of my trailer. Hated that thing. I took it off the wall and now I have a DeWalt quiet stealth sonic vacuum but it sits on the floor of my trailer so it's not the best idea. Just thought I replied to you here because I had that Bissell and I agree it is crappy. Did you get this vacuum? The nadair? I'm looking to get a wall mounted vacuum that works properly. This vacuum looks awesome.
Great vacuum set up! We have a Beam central vacuum system installed when we built our house throughout the whole house and garage. It too has 700 aiwatts and the suction extremely powerful.🌪👍
Another question! What was your deciding factor of this 700 air watt vs the other choices from Nadair... the 630 or 750 air watt 35L? The look? the suction? The noise? Thanks! Making my final decision soon!
Welp, I wish I had seen this vid, and your channel 2 weeks ago when my Craftsman wall mounted vac took a dump. It lasted 10 years so I can't complain, but I went and bought another because I needed it. I found your channel randomly by seeing the Giraffe pressure washer. I woulda spent the money to make this setup in my garage. When the new Craftsman blows up in 10 years.......
I would definitely like to see a complete video of each. item that you have in the set up and where to find them (everything from the vac, to the reel, to the brace holding the vac, etc. ) and the overall price to have a vacuum system like yours done in my shop.
Inspired by your video, I replicated the exact same setup: NadAir vacuum, Cox Reel hose, 50 feet hose. One thing that I noticed is that when the vacuum turned on, it makes a whining or hissing noise. Trying to figure out, where the bottleneck could be. In your setting, it seems to run within noise range advertised by NadAir. In my case, it is loud - at about 118 DB when completely setup and 80 DB when the unit is on its own.
Sometimes air moving through the corrugated vacuum hose with that amount of force makes a noise. When it’s unreeled about 1/3 of the way or more it is very quiet. Is this what you are experiencing?
@@HawaiiDetailing That solved the problem! Thanks for the feedback. It was driving me crazy. I tried everything from different piping, to jump hoses, to pressure relief valve with no success. I really wanted this vacuum setup to work before jumping ships and going for Obsessed Garage version. NadAir is a keeper!
I love to look of this vac. Not sure how it compairs with the one Matt is selling now with obsessed garage as a kit with cox hose reel. I like that you don’t have to use bags in this one
I have not tried his model yet. I would like to bring one in at some point and see what it can do. I really like the one I have. It’s powerful and I have happy every time I use it.
Ah I wish I knew this was available before I setup my garage vacuum. I went with the Garage Vac PRO. I did not like the idea of replacement bags so instead I have it routing through 10 Gal. Dust Deputy Deluxe Cyclone Separator Kit. I also went with the same setup with a 50ft CoxReel. Suction is very powerful to the point where it picks up car carpet a little too much but cant complain with too much suction power! The biggest issue I have which I dont think Nadair 700 would solve is being able to suction larger items (e.g. fallen leaves). I find even with the 1.5" diameter Coxreel hose it still gets stuck. Nevertheless great for garage cleaning and cars. Thanks for the video
I ended up going for the OVO Garage Vacuum (same parent company and motor as the Nadair) - it says its only 595 Airwatts but when I google the model number on the motor it says its 630 Airwatts... so guess I got lucky or they put the wrong motor in it haha. Thanks for the honest content!
Thank you for the great videos! I decided to go with the same setup as you (Central Vac), my Ridgid shopvac was way too loud. While waiting for my Central Vac, one thing I still need to find a solution for is how to trigger the low voltage connection remotely. I'm going to setup a rocker switch for now.
@@TheVelluch I had to run a low voltage wiring and to a switch, as of now I don’t think there are an alternative solutions yet. (I checked on Amazon to see if there’s a product that can do it)
You still liking this vac? I'm thinking about putting it in my van. It has soft start which will be good for running on a generator, especially when running a air compressor at the same time. I was looking at this one and the Vacmain UV150CKP which has the same specs at this but its $30 cheaper and comes with a 50' hose (which makes it substantially cheaper). But the Nadair has soft start and it will look soooooo awesome in my van hahaha.
Great video, inspiring… Beats my vintage 6hp craftsman that I swear makes 110db. It’s like a jet engine is running while I’m working. Pair that with an air compressor running while using a tornador velocity vac and you better have ear pro on.
I’ve narrowed it down to a Nadair or the Prolux garage vac that also sucks wet. Lady from Prolux said 1140 air watts of suction. About the same price. Do you still love yours?
I still like it a lot and use it all the time. It’s front and center on my wall. I suggest for you to get what makes sense to you though buddy. I want you to feel good about your purchase based on your personal research so you get a model that meets all of your needs and arrives with all the specs and features that you are expecting. My review on this machine was as thorough as I could be but I have no idea what the other vacuum manufacturers claim or what kind of results they produce in comparison. Sorry that all I got and I hope that helps. Thanks for watching the channel.
Very cool! We are having a house built and I'm stealing a lot of your setups. Might check into a less powerful wall mount as I only want something for a garage. Cant wait to see the house vac setup!
Thanks a lot. Check back later I am going to put together some links in the description of different level vacuums to meet different needs and budgets. Thanks for watching
Nice set up! I hope to get my house sold, and buy a bigger place to build a nice shop or two! Then I can get my video better and more consistent. I have my dust collector on the wall but never got it fully set up.
Looks amazing! Such a clean setup. Question: because this is a low voltage system designed primarily for home install, does it have a regulate switch on the side that can just be toggled on and off? My use wld be as a garage vac and I’m looking for a relatively easy setup.
do you loose any CFM or suction by going 50ft on a 1.5 inch hose instead of a 2inch?. Even my 6 HP Ridgid shop had a performance loss when using the smaller hose compared to the 2inch. I will say that 2inch hose is pretty heavy.
Very nice indeed! Well done. I'm thinking the Ridgid vac is now for wet applications if needed? Will there be "ports" for vacuum hose connections strategically located throughout the dwelling? Can't wait to see it. Will the increased distance hurt performance and lower the efficiency? I can see why you love vacuuming, it's rather therapeutic. Thanks for the video and review/info. 👍🏻✌🏻
I will keep the ridged for the wet messes. I plan to install it throughout the whole house. It should perform great because it’s made to handle a 10k sq ft. House. The suction is insane on this machine.
for the sake of the life of the machine i highly recommend using the bag, it's not as expensive as you think and in central vacuums they can last quite a long time. the bag acts as a membrane that protects your air and your machine from damage and as it fills it compacts the dirt and when you dispose of it all that is outside and you don't run the risk of breathing in those particles you just vacuumed up as you would by dumping a bin. I have worked on thousands of machines as a vacuum technician and i hate bagless machines for these reasons
Great setup. Does the low voltage switch need to also be connected to a 120v power source or is it just the low voltage line and the switch completes the circuit?
What do I see h for? I put in vacuum adapter but cannot locate. Can you tell me what to search for or if you have a link that would be helpful. Much appreciated
@@excerritosresident the kit is for piping your house for a whole house vac. It has way to much pipe and fittings for the fox reel setup. I recommend getting it from the hardware store. It will be a few PVC fittings and some pipe. It will be cheaper and you can customize it to fit your area. Let me know if you have any questions.
That is awesome looking! I wonder how it compares suction-wise to the VacuMaid GV50PRO.... Sense you can use it without a bag, does that mean you can suck up water with it?
Not sure the suction comparison but no water with this one. The bag situation with the vacumaid was a deal breaker for me. I would hate to have to change bags as they would fill up fast and you would have to also be conscious of what you are vacuuming into the machine.
I wonder how this compares to like a dedicated dust collector in a wood shop? I'm going to be grabbing a clear view cyclone for my woodshop and I wonder if I can also use that for the car
Looks great, I’ve been looking to upgrade my vacuum for awhile now, still running the Rigid. Been eyeing the Vacumaid Garage Pro. Your vacuum seems to have a high pitched squeal when it’s running, does that get annoying or is it only noticeable in the video?
The small sound you are talking about is actually coming from the hose on the Cocreel. The air ripping through it makes a slight high pitch sound but it is not loud or a problem. The mic I use is very sensitive and made it seem worse then it is I guess. The vacuum itself is extremely quiet. The hose that comes with the machine is silent without that sound but I really like my Coxreel for the garage and it’s so minor I don’t mind. Hope that helps.
Did you buy the Vac only? I'm thinking about this vacuum for my mobile grooming trailer. Mainly I would be vacuuming hair but I also use garbages for clumps of hair.
@@HawaiiDetailing Thank you so much for taking the time to reply to my message! I'll need to get some kind of hose as I would not need a reel... Right now I have a quiet DeWalt stealth Sonic and I appreciate the quietness but it sits on my floor. And I have plenty of room on the wall for a wall mount vacuum. Thanks again!!
I was on a mission to replace my 20yr shop vac and was ready to just accept a vacumaid until I found this video. Thanks for sharing. Can't locate the vacuum anywhere so might have to go with Ovo which on paper seems comparable. Not as nice looking and probably a step down but it's in stock. thanks again
So I broke down and got my vacuum unit. But however I am having a very difficult time in trying to find the fittings to pipe it to the reel. Seems like none of my hardware stores have anything I need. Could you please if you're able to, itemized the fittings you used. Exactly what style of piping it is, and where you purchased it from. I don't need the Run pipe dimension, just the fittings to and from the inlet and exhaust and on the reel. TIA! (I tried to email you from your website but would not work for some reason)
would you do a review or talk about quality of - OVO Compact and Powerful Central Vacuum System, 550AW? What you may or may not like about That vacuum? Thanks. looks like the ovo is bagged only?
You did mention OVO 18 l compact central vac as A vacuum option in your description bar. Have you never used one? I figure you may know about it since you listed it as a less costly option. I'm checking TH-cam for a video review of that specific OVO vacuum however I have not come across one yet. And probably Not worth saving a little bit of money with the OVO but rather spend about double and get the setup you have!@@HawaiiDetailing
Love the setup. I purchased the same unit and reel. Having an issue finding piping parts in my area. I originally purchased the 90 degree elbow in your link that has the threaded end for hose which fits nice to the reel. The issue is the outlet of the vacuum is 2". The plan was to find a 2" outlet piece that would have a threaded end for the 1.5" hose. Not having much luck. I may have to hard pipe like you did. Where did you purchase the piping from and did you have to paint your piping or did it come grey? Thanks for your help
Update....issue resolved. Found an adapter piece at Home Depot that I modified and used as a bushing on the vacuum inlet. Bought 2 swivel threaded elbows that you had in your description and used a piece of the flexible 1 1/2" hose.
@@mnjshuve please tell me what part you bought at Home Depot! I’m in my garage researching like a mad man trying to find a way to fit 2” vac to 1.5” reel
Can this be used to pick up water? Goal would be to replace that Bissell spot pro and use this as a extractor as well? What other options do you have to replace the Bissell?
This is a dry vac only. I think the next step up from the bissell is a professional extractor. Check out a few I put at the bottom of this list. www.amazon.com/shop/hawaiitesladetailing?listId=6YKQRMC4BQ5M&ref=inf_list_own_hawaiitesladetailing
@@HawaiiDetailing 👍 thank you for your response. My thought process is that I own a 6hp dry/wet shop vac, i do this just for fun and therapy! I've used the attachments provided and it works fine. One thing missing from my extraction process is the spray of water. Iam just wanting that hose attachment and I'll hook up water to it. There's diy on yt for what I'm talking about so I know it can be done. Just wanted your real life experience input? Have you ever used a diy extractor shopvac? How would you think it works?
Awesome setup there! Any thoughts on the Vacumaid line up? Their Garage Vac Pro seems to have just slightly less power specs but 1/2 the price of the Nadiar. Is it due to the house vacuuming as well that you went higher up with Nadiar?
Here are the differences I found from my research. I am not putting Vacumaid down I am sure they have a great product but I chose to go this route based on my research. There are other features and things that make a big difference but this is what I have off the top of my head. Hope it helps Nadair has a 25 year warranty 10 years on the motor. Vacumaid 5 yrs residential and 90 day commercial and does not cover normal motor wear?? Nadair uses a hybrid machine washable filter that does not require using bags. (save huge $ long term) Vacumaid requires bags @ $30 for 3 Nadair is super quiet at 70DB (this was important to me) Vacumaid No mention of DB levels Nadair makes a smaller version with the same stats for $499 amzn.to/3x9Jhzw Here is the OVO (Nadair parent company) version that is more comparable to the Vacumaid amzn.to/30LgPro
Excellent review! just one thing, can you add the link where you got the vacuum hose attachment, i like it and everything i had found so far looks like a toy attachment, the one you have looks like it can take the abuse. Thank you!
Thanks. I don’t have a link. I have had that thing forever and never replaced it. I plan to go down the attachment rabbit hole soon and find some good ones.
Awesome setup! When you finish the house install how will you use the on/off switch? Currently the on/off switch controls one hose. When you install the rest of the house, the system needs to be ON all of the time, so when you plug a hose into the inlet (various rooms) it turns on automatically. Other issue is when using other inlet ports, the system needs to be fully closed for full suction....so the hose connection in the garage must be closed otherwise you will get low suction throughout the house. I've been trying to figure this out for my setup unsuccessfully and hope you have an answer. Love all your videos! Thank you
Hey Paul. I have good solutions to all of this for sure. I am working on that project real soon and it will be part 2 of this video. it will cover everything you need to make this happen at you house. Stay tuned and that’s for watching.
Seems like you could install a smart switch in place of the standard light switch to power from a smartphone. You can also look into remote controlled blast gates for woodworking dust collection systems.
Is there an attachment you recommend that will allow me to reach to tough areas between the left side of the drivers seat and the door? There is a small patch of carpet that my current vacuum attachment is just to thick to go into the area because of the seat frame. There are other areas in my car too that I really could use a smaller attachment for my vacuum. Thanks
![ALLY - OH MY! [ REACTION ] 'Amarin Nitibhon' #ALLY_OHMY #ALLY #allynitibhon #แอลลี่](http://i.ytimg.com/vi/nX9qpHjVfbQ/mqdefault.jpg)
Here is a comprehensive guide to building your wall mounted vacuum kit www.hawaiidetailing.com/vacuum
That looks great, would love to install it. The fact that it can do the whole house is a selling point to my wife!
Yes. I agree. Makes the investment into the machine worth it. Wait till you see the rest. Thanks for watching
@@HawaiiDetailingman I love your videos. Keep them coming. We love your attention to detail. The video we just watched with your new red Tesla. You wrote descriptive info in the bottom corners as you worked through the steps while music played. Even though you spoke of the item you were using next as well as what you were doing. We love that you show us the product or bottle wheee we can easily see it. Your awesome.
What vacuum accessories do you use. What do you use to vacuum your Swiss trax? Does this have more power than the OG vac and if it does we are not going to take it that your putting it down. We just want to know what the facts are. We like the look of this vac and its features more than the OG vac so far from what we have seen.
Lastly. You spoke of the studs and the 2x6 boards between the studs. I have the same Kranzle you have and their shelf. I did not have 2x6 or 2x8 boards between my studs. I do have my system mounted on studs that are spaced 16” apart and the studs themselves are 2x6 studs. There are no support boards between the 16” spaced studs. On top of the studs are 1/2” plywood and then 5/8” drywall. I have 4” lag screws holding the shelf and the coxreel as well as the CR spotless all in the same stud bay. I should be ok right. Everything is mounted on both studs 16” apart.
Hello! Recently found your channel. I bought a house last year that has a dedicated central vac outlet in the 5 car garage (along with hot/cold water, radiant heat, floor drains and 20 ft ceilings). The guy who built it really knew what he was doing. I have lots of room to trick it out so your videos will be very helpful. Thanks!
Awesome. Thanks
man, I love the way this guy laughs, great video
Thanks. I am glad you enjoy the channel.
I love his attention to details and OCD. He has his own character :)
I am in the business and that's a clean set up. Spray painting the pipe to match the walls is a nice touch. They have retractable hose systems widely available now that eliminate the need for a spool set up but what you have is pretty sweet.
Thanks a lot. I appreciate it
Where can you get the retractable set up?
Man that thing is killer, can’t wait to see it ran throughout your house that’ll be awesome and multi functional.
Yes. It will perform awesome for sure. Will be a fun install. Thanks for watching
I love your detailing product reviews and tips but what i love most is that your hilarious! I laugh everytime you laugh when you say something that's funny!
Thank you. I am glad you like the videos.
Garage is looking legit, one of the best setups I've seen. Simple but effective!
Great job 👏
Thanks a lot. I appreciate it
Im looking for a high performance vacuum for my shop/garage. But with the huge amounts of "dirt", saw dust, and other swarf, Im pretty sure I will need some type of cyclone separator, to bypass most of it before it hits the vacuum. Great video
Hey Jeremy I like the set up a lot, it looks sick!!! Can't wait to see a full home set up 🤙
Thanks a lot. I appreciate the feedback.
I think it is sick too. In fact, I am going to do a very similar set up in my workshop lol.
Yeah I love mine. Can't imagine it any other way now.
That's a detailers dream having reels for everything especially vacuums
They are nice for sure. Thanks for watching
Looks neat! That is a lot of sick suction and quiet, too.
its about time someone had a nice vacuum install/reveal. im builing mine using 2x8.4 and stainless drum
Thanks. This is the best vacuum I could find. Suction is absolutely insane. Looks cool too. At least I think so. Hahaha. Doesn’t require filter bags either which is rare and for me was a must have.
Great video! Amazing install! I wasn't aware of this brand. I have a crappy Bissel wallmount garage vac, and it just gets worse and worse as time goes on. This video absolutely convinced me that the Nadair is the way to go. The hose reel setup is brilliant. Love the passion you have for the fine work you've done!
Thanks. I appreciate it.
Hi there! Hey I have a mobile grooming trailer that came with the Bissell garage pro wall mounted vac with the build of my trailer. Hated that thing. I took it off the wall and now I have a DeWalt quiet stealth sonic vacuum but it sits on the floor of my trailer so it's not the best idea. Just thought I replied to you here because I had that Bissell and I agree it is crappy. Did you get this vacuum? The nadair? I'm looking to get a wall mounted vacuum that works properly. This vacuum looks awesome.
Great vacuum set up! We have a Beam central vacuum system installed when we built our house throughout the whole house and garage. It too has 700 aiwatts and the suction extremely powerful.🌪👍
Yeah that’s plenty. Thanks for watching
Another question!
What was your deciding factor of this 700 air watt vs the other choices from Nadair... the 630 or 750 air watt 35L? The look? the suction? The noise? Thanks! Making my final decision soon!
Welp, I wish I had seen this vid, and your channel 2 weeks ago when my Craftsman wall mounted vac took a dump. It lasted 10 years so I can't complain, but I went and bought another because I needed it. I found your channel randomly by seeing the Giraffe pressure washer.
I woulda spent the money to make this setup in my garage. When the new Craftsman blows up in 10 years.......
When the time comes this is a great vac. Thanks for watching
This is the coolest thing I didn't know I needed.
Hahaha. Yeah. I agree
Great video! I didn’t realize I needed or had to have a new garage till I watched this video. The Nadair is on the way.!
Great machine. You will like it. Thanks for watching
I can’t wait to see this in your house
I will get time to finish that up soon. Thanks for watching
This is def the unit Ima go with when I get my garage together
It’s a good one. Thanks for watching
I would definitely like to see a complete video of each. item that you have in the set up and where to find them (everything from the vac, to the reel, to the brace holding the vac, etc. ) and the overall price to have a vacuum system like yours done in my shop.
Here is everything. I listed some different price point options as well. www.hawaiidetailing.com/vacuum Thanks for the idea!
The whole garage setup is amazing
That looks great. I want a set up Like that. Thanks for Sharing
Thanks for watching
Inspired by your video, I replicated the exact same setup: NadAir vacuum, Cox Reel hose, 50 feet hose. One thing that I noticed is that when the vacuum turned on, it makes a whining or hissing noise. Trying to figure out, where the bottleneck could be. In your setting, it seems to run within noise range advertised by NadAir. In my case, it is loud - at about 118 DB when completely setup and 80 DB when the unit is on its own.
Sometimes air moving through the corrugated vacuum hose with that amount of force makes a noise. When it’s unreeled about 1/3 of the way or more it is very quiet. Is this what you are experiencing?
@@HawaiiDetailing That solved the problem! Thanks for the feedback. It was driving me crazy. I tried everything from different piping, to jump hoses, to pressure relief valve with no success. I really wanted this vacuum setup to work before jumping ships and going for Obsessed Garage version. NadAir is a keeper!
Looks fantastic! Can't wait to see the setup for the house as well.
I want to get it going soon. Thanks
Inspiring and Excellent videos!!! The Hahaha in every video never get old!!!
Thanks a lot. I appreciate it
What size pvc pipe did you use and what did you use for the low voltage switch?
I love to look of this vac. Not sure how it compairs with the one Matt is selling now with obsessed garage as a kit with cox hose reel. I like that you don’t have to use bags in this one
I have not tried his model yet. I would like to bring one in at some point and see what it can do. I really like the one I have. It’s powerful and I have happy every time I use it.
Your video made me want to buy it for my detailing business and it comes in Wednesday June 8th and sheesh I’m excited
It’s an awesome vac. Crazy powerful. You will like it.
@@HawaiiDetailing where did you buy the pipes to install
Ah I wish I knew this was available before I setup my garage vacuum. I went with the Garage Vac PRO. I did not like the idea of replacement bags so instead I have it routing through 10 Gal. Dust Deputy Deluxe Cyclone Separator Kit. I also went with the same setup with a 50ft CoxReel. Suction is very powerful to the point where it picks up car carpet a little too much but cant complain with too much suction power! The biggest issue I have which I dont think Nadair 700 would solve is being able to suction larger items (e.g. fallen leaves). I find even with the 1.5" diameter Coxreel hose it still gets stuck. Nevertheless great for garage cleaning and cars. Thanks for the video
Thanks for sharing. I love this vacuum setup. Thanks for watching
Central vacuum cleaners are fantastic. I love mine!
Yes. This thing is awesome. Thanks for watching
I ended up going for the OVO Garage Vacuum (same parent company and motor as the Nadair) - it says its only 595 Airwatts but when I google the model number on the motor it says its 630 Airwatts... so guess I got lucky or they put the wrong motor in it haha. Thanks for the honest content!
Great machine. I love mine.
Another smashing video! What is the inside diameter of the hose that comes with the reel?
Just now stumbled upon your channel- love your videos! So glad I found them! 🤗
Thanks a lot. Glad you enjoyed
That set up is legit. Great job.
Thanks
Performance looks strong but the machine looks amazing. Like a silver bullet.
Yeah. I like it too. Thanks
Thank you for the great videos!
I decided to go with the same setup as you (Central Vac), my Ridgid shopvac was way too loud.
While waiting for my Central Vac, one thing I still need to find a solution for is how to trigger the low voltage connection remotely.
I'm going to setup a rocker switch for now.
I love the vac. It’s a mean machine.
Did you figure out a remote trigger solution yet?
@@TheVelluch I had to run a low voltage wiring and to a switch, as of now I don’t think there are an alternative solutions yet. (I checked on Amazon to see if there’s a product that can do it)
Hell yeah Jeremy sweet setup that's a beautiful vacuum ..... great review
Thanks. I appreciate it
This set up is killer. Love the lights and the vacuum!
Thanks. I appreciate it
Thanks for the review, I know what I'm getting for Christmas.
That would be a great gift for sure. Thanks for watching
great content, I would definitely look into this setup for my future garage. Thanks for sharing your knowledge! o7
Glad it was helpful!
Nice vacuum set up man!!! Nothing like having all your car cleaning needs at your finger tips!! Bam!💥
Thanks. The better the setup the more I want to use it.
@@HawaiiDetailing I hear you!! Enjoy!!
Man you have a really nice set up..need one for my garage .
Thanks. It’s a great vacuum.
Garage goals right there!!
Thanks a lot.
You still liking this vac? I'm thinking about putting it in my van. It has soft start which will be good for running on a generator, especially when running a air compressor at the same time. I was looking at this one and the Vacmain UV150CKP which has the same specs at this but its $30 cheaper and comes with a 50' hose (which makes it substantially cheaper). But the Nadair has soft start and it will look soooooo awesome in my van hahaha.
This vacuum is really nice. Best vacuum I have ever had. Thanks for watching
Garage is looking amazing!
Thank you.
Great video, inspiring… Beats my vintage 6hp craftsman that I swear makes 110db. It’s like a jet engine is running while I’m working. Pair that with an air compressor running while using a tornador velocity vac and you better have ear pro on.
Hahahaha. I know what you mean man.
I so want one. Is it all that? Was there any others that u were also considering? That thing is sharp!!!!!!!!!
I’ve narrowed it down to a Nadair or the Prolux garage vac that also sucks wet. Lady from Prolux said 1140 air watts of suction. About the same price. Do you still love yours?
I still like it a lot and use it all the time. It’s front and center on my wall. I suggest for you to get what makes sense to you though buddy. I want you to feel good about your purchase based on your personal research so you get a model that meets all of your needs and arrives with all the specs and features that you are expecting. My review on this machine was as thorough as I could be but I have no idea what the other vacuum manufacturers claim or what kind of results they produce in comparison. Sorry that all I got and I hope that helps. Thanks for watching the channel.
Great set up! Do you have any info on the connection for the vacuum auction? Does it need a special fitting or anything?
I used standard pvc fittings. Thanks.
Very cool! We are having a house built and I'm stealing a lot of your setups. Might check into a less powerful wall mount as I only want something for a garage. Cant wait to see the house vac setup!
Thanks a lot. Check back later I am going to put together some links in the description of different level vacuums to meet different needs and budgets. Thanks for watching
Nice set up! I hope to get my house sold, and buy a bigger place to build a nice shop or two! Then I can get my video better and more consistent. I have my dust collector on the wall but never got it fully set up.
Thanks. I appreciate it
Looks amazing! Such a clean setup. Question: because this is a low voltage system designed primarily for home install, does it have a regulate switch on the side that can just be toggled on and off? My use wld be as a garage vac and I’m looking for a relatively easy setup.
I put the low voltage to a wall switch to turn it on and off. Mahcine plugs in to a wall outlet for the 120v.
@@HawaiiDetailing So it does not have a switch?
It does not have a switch
Great video. I had not heard of that brand before.
I like it. Great machine and no bag. Just dump it out.
do you loose any CFM or suction by going 50ft on a 1.5 inch hose instead of a 2inch?. Even my 6 HP Ridgid shop had a performance loss when using the smaller hose compared to the 2inch. I will say that 2inch hose is pretty heavy.
Nice clean setup. I really like how everything is nicely setup.
Thanks! i appreciate it
Sick setup man keep it up!!!!
Appreciate it!
Very nice indeed! Well done. I'm thinking the Ridgid vac is now for wet applications if needed? Will there be "ports" for vacuum hose connections strategically located throughout the dwelling? Can't wait to see it. Will the increased distance hurt performance and lower the efficiency? I can see why you love vacuuming, it's rather therapeutic. Thanks for the video and review/info. 👍🏻✌🏻
I will keep the ridged for the wet messes. I plan to install it throughout the whole house. It should perform great because it’s made to handle a 10k sq ft. House. The suction is insane on this machine.
for the sake of the life of the machine i highly recommend using the bag, it's not as expensive as you think and in central vacuums they can last quite a long time. the bag acts as a membrane that protects your air and your machine from damage and as it fills it compacts the dirt and when you dispose of it all that is outside and you don't run the risk of breathing in those particles you just vacuumed up as you would by dumping a bin. I have worked on thousands of machines as a vacuum technician and i hate bagless machines for these reasons
Thanks for the suggestion. Makes sense.
My vacuum is the one down at the car wash. 😑 That's my next upgrade along with a tornader air blower tool.
Great setup. Does the low voltage switch need to also be connected to a 120v power source or is it just the low voltage line and the switch completes the circuit?
The switch completes the low voltage circuit.
Damn that’s so clean!! Well done
Thanks
Do you have a water softener for your home? Everything so neat in your garage, wondering if you had some special compact softner
No I don’t. I plan to get one in the future. Thanks for watching
Hopefully we can see the install video on this for the main house. Surprising it’s been a year and that hasn’t happened yet.
@@VacMaster2020 planning to move and did not want to do all the work just to rip it out again.
Love the video so much information. Do you think it is powerful enough to use two hoses at once while detailing?
It’s pretty strong. Not sure about 2 hoses at the same time. If any vac can it’s this one. Thanks for watching
u can change that adapter with bissell so u do deep clean so eazy :D
Does it come with the piping you have in this video? From cox real to vacuum.
No it’s a separate kit. It can also be purchased at the local hardware store for cheap. Thanks watching
Can you tell me what’s the name of the kit or send me a link
What do I see h for? I put in vacuum adapter but cannot locate. Can you tell me what to search for or if you have a link that would be helpful. Much appreciated
@@excerritosresident the kit is for piping your house for a whole house vac. It has way to much pipe and fittings for the fox reel setup. I recommend getting it from the hardware store. It will be a few PVC fittings and some pipe. It will be cheaper and you can customize it to fit your area. Let me know if you have any questions.
Great set up! Have you ever looked at pneumatic vacuums?They are crazy powerful and use no electricity or moving parts.
No I have not. Will look into it. Thanks
That is awesome looking! I wonder how it compares suction-wise to the VacuMaid GV50PRO.... Sense you can use it without a bag, does that mean you can suck up water with it?
Not sure the suction comparison but no water with this one. The bag situation with the vacumaid was a deal breaker for me. I would hate to have to change bags as they would fill up fast and you would have to also be conscious of what you are vacuuming into the machine.
Love your channel, thank you for sharing.
Thanks a lot. I appreciate it
What adapter did you use for the hose?
Did all of the rigid hose nozzles fit the cox reel hose?
I wonder how this compares to like a dedicated dust collector in a wood shop? I'm going to be grabbing a clear view cyclone for my woodshop and I wonder if I can also use that for the car
Good question
That is an awesome looking setup! 👏
Thanks. I like it a lot.
Very nice set up! Keep up the great work 👍
Thank you.
Looks awesome.
Thanks a lot
Looks great, I’ve been looking to upgrade my vacuum for awhile now, still running the Rigid. Been eyeing the Vacumaid Garage Pro. Your vacuum seems to have a high pitched squeal when it’s running, does that get annoying or is it only noticeable in the video?
The small sound you are talking about is actually coming from the hose on the Cocreel. The air ripping through it makes a slight high pitch sound but it is not loud or a problem. The mic I use is very sensitive and made it seem worse then it is I guess. The vacuum itself is extremely quiet. The hose that comes with the machine is silent without that sound but I really like my Coxreel for the garage and it’s so minor I don’t mind. Hope that helps.
Looks great how are you liking the vacuum till this day any issues u ran into?
Works awesome. I like it a lot. Easy to empty, powerful and quiet.
Did you buy the Vac only? I'm thinking about this vacuum for my mobile grooming trailer. Mainly I would be vacuuming hair but I also use garbages for clumps of hair.
Vac only is a great option for sure. That’s what I did.
@@HawaiiDetailing Thank you so much for taking the time to reply to my message! I'll need to get some kind of hose as I would not need a reel... Right now I have a quiet DeWalt stealth Sonic and I appreciate the quietness but it sits on my floor. And I have plenty of room on the wall for a wall mount vacuum. Thanks again!!
Nice setup!
Thanks
I was on a mission to replace my 20yr shop vac and was ready to just accept a vacumaid until I found this video. Thanks for sharing. Can't locate the vacuum anywhere so might have to go with Ovo which on paper seems comparable. Not as nice looking and probably a step down but it's in stock. thanks again
You are welcome. It’s a great machine.
Awesome brother will try it!!
It’s a good one especially if you want a piped in solution for you whole garage or house. Thanks for watching
What size pvc did you use? Seems like 1 1/2, but I wasn’t sure
Sorry man I mis read your comment. Its all 2"pipe
That looks like a great vacuum
I like it a lot. Thanks for watching
lmao i love how he cracks up at himself great stuff man
Thanks for watching
So I broke down and got my vacuum unit. But however I am having a very difficult time in trying to find the fittings to pipe it to the reel. Seems like none of my hardware stores have anything I need. Could you please if you're able to, itemized the fittings you used. Exactly what style of piping it is, and where you purchased it from. I don't need the Run pipe dimension, just the fittings to and from the inlet and exhaust and on the reel. TIA!
(I tried to email you from your website but would not work for some reason)
Heat up the correct PVC fitting with a torch. Slide it over the reel fitting. It will cool and harden a perfect fit.
would you do a review or talk about quality of - OVO Compact and Powerful Central Vacuum System, 550AW? What you may or may not like about That vacuum? Thanks. looks like the ovo is bagged only?
I dont have one but can look into it. Thanks
You did mention OVO 18 l compact central vac as A vacuum option in your description bar. Have you never used one? I figure you may know about it since you listed it as a less costly option. I'm checking TH-cam for a video review of that specific OVO vacuum however I have not come across one yet. And probably Not worth saving a little bit of money with the OVO but rather spend about double and get the setup you have!@@HawaiiDetailing
Does this thing suck better than a string shop vac? If so I’m sold!!!!
It has a lot of suction for sure. Way more than a shop vac.
Thanks for sharing, love it, but you didn’t talk about cost 💲 of this vacuum?!!
I don’t know the current cost. I put a link in the description if you want to check it out. Thanks for watching
Is the follow up video still in the works?
Love the setup. I purchased the same unit and reel. Having an issue finding piping parts in my area. I originally purchased the 90 degree elbow in your link that has the threaded end for hose which fits nice to the reel. The issue is the outlet of the vacuum is 2". The plan was to find a 2" outlet piece that would have a threaded end for the 1.5" hose. Not having much luck. I may have to hard pipe like you did. Where did you purchase the piping from and did you have to paint your piping or did it come grey? Thanks for your help
Update....issue resolved. Found an adapter piece at Home Depot that I modified and used as a bushing on the vacuum inlet. Bought 2 swivel threaded elbows that you had in your description and used a piece of the flexible 1 1/2" hose.
Thanks for sharing your update. I was looking into how to help you resolve it. Thanks for watching. Enjoy that beast of a vacuum.
@@mnjshuve please tell me what part you bought at Home Depot! I’m in my garage researching like a mad man trying to find a way to fit 2” vac to 1.5” reel
Can this be used to pick up water? Goal would be to replace that Bissell spot pro and use this as a extractor as well? What other options do you have to replace the Bissell?
This is a dry vac only. I think the next step up from the bissell is a professional extractor. Check out a few I put at the bottom of this list. www.amazon.com/shop/hawaiitesladetailing?listId=6YKQRMC4BQ5M&ref=inf_list_own_hawaiitesladetailing
@@HawaiiDetailing 👍 thank you for your response.
My thought process is that I own a 6hp dry/wet shop vac, i do this just for fun and therapy! I've used the attachments provided and it works fine. One thing missing from my extraction process is the spray of water. Iam just wanting that hose attachment and I'll hook up water to it. There's diy on yt for what I'm talking about so I know it can be done. Just wanted your real life experience input? Have you ever used a diy extractor shopvac? How would you think it works?
Awesome setup there! Any thoughts on the Vacumaid line up? Their Garage Vac Pro seems to have just slightly less power specs but 1/2 the price of the Nadiar. Is it due to the house vacuuming as well that you went higher up with Nadiar?
Here are the differences I found from my research.
I am not putting Vacumaid down I am sure they have a great product but I chose to go this route based on my research.
There are other features and things that make a big difference but this is what I have off the top of my head. Hope it helps
Nadair has a 25 year warranty 10 years on the motor.
Vacumaid 5 yrs residential and 90 day commercial and does not cover normal motor wear??
Nadair uses a hybrid machine washable filter that does not require using bags. (save huge $ long term)
Vacumaid requires bags @ $30 for 3
Nadair is super quiet at 70DB (this was important to me)
Vacumaid No mention of DB levels
Nadair makes a smaller version with the same stats for $499 amzn.to/3x9Jhzw
Here is the OVO (Nadair parent company) version that is more comparable to the Vacumaid amzn.to/30LgPro
Excellent review! just one thing, can you add the link where you got the vacuum hose attachment, i like it and everything i had found so far looks like a toy attachment, the one you have looks like it can take the abuse. Thank you!
Thanks. I don’t have a link. I have had that thing forever and never replaced it. I plan to go down the attachment rabbit hole soon and find some good ones.
@@HawaiiDetailing Thank you sir
Awesome setup! When you finish the house install how will you use the on/off switch? Currently the on/off switch controls one hose. When you install the rest of the house, the system needs to be ON all of the time, so when you plug a hose into the inlet (various rooms) it turns on automatically. Other issue is when using other inlet ports, the system needs to be fully closed for full suction....so the hose connection in the garage must be closed otherwise you will get low suction throughout the house. I've been trying to figure this out for my setup unsuccessfully and hope you have an answer. Love all your videos! Thank you
Hey Paul. I have good solutions to all of this for sure. I am working on that project real soon and it will be part 2 of this video. it will cover everything you need to make this happen at you house. Stay tuned and that’s for watching.
@@HawaiiDetailing Can't wait! Thank you!
Seems like you could install a smart switch in place of the standard light switch to power from a smartphone. You can also look into remote controlled blast gates for woodworking dust collection systems.
Can you show how you did the wiring please? I have the same setup and I’m trying to use my cox reel but it only works with the Nadair hose.
@@HawaiiDetailing waiting for part 2 :)
Real nice.
Thanks
Good morning bother this pretty expensive which of these to you think is best with the most sucking power VacuMaid vs bissell I work out of a trailer
Sorry man I have not used them. Look at my older video where I have a rigid shop vac hooked to it. Worked good.
Goals 😲
Is there an attachment you recommend that will allow me to reach to tough areas between the left side of the drivers seat and the door? There is a small patch of carpet that my current vacuum attachment is just to thick to go into the area because of the seat frame. There are other areas in my car too that I really could use a smaller attachment for my vacuum. Thanks
I have been looking for a good one. When I find it I will mention it in a video. Thanks