Great job. I felt your excitement. I'm inspired to get back Into electronics and quite my job as a Marine Electrician. I might be a little rusty but this stuff facinates me.
Thank you for posting! If this video earns any YT money, please invest in a BDM frame. Watching you have to hold that steady so as not brick your new ECU was giving me anxiety. 😨
Hahhaha! :) thanks for watching my stuff! I'm not that far! i don't earn any money with this. But for sure i will invest in a BDM-Frame as soon as possoble! Greetings from Switzerland! Matthias
Hi Kostel, i see your videos, great job, listen i need 1 advice, maybe you CAN help me, i have 1 passat tdi 2000 edc 15x i loose the ecu, i BAYED onother one on ebay and i want to clone for my car, HOW can i do ti? did you have any video? i need ...other tool to do it? need other new key clone? thx for answer me
please answer my questions: 1- in 1.55 on this video you said i do that because i havent locking code . do you mean pin code and if you have it then no need to use ktag? 2- is there other way to read that med9.5.10 by ktag without using the green colored adapter? 3- is your ktag original or chinese?
The number you are not sure its Software The bigger SW its the newer version of flash file are inside. If you have frf/sgo file you can upgrade or downgrade files ;) Or if you have full bdm file like you have you can transfer full backup to another it will work ;)
you used an adapter to read the ecu, if i havent the adapter can i use other method ( connecting wires at ecu pins ) ? i mean does software show u many methods for every ecu ?
Hi there, thanks for the Video. Do You know if there is any boot pin on the plate on Med9.5.10 to ground on it for read down the eeprom? Thanks in advance and greets
Hi from sunny South Africa Thanks for sharing such a informative video Im glad I found your channel.I’m still new to this trade I recently purchased a Chinese clone Kess and k tag Thus far I managed to do on two separate ecus dpf and egr delete with kess on Mercedes’ sprinter it worked fine.My question is can I use this on a 24 volt vehicle Thanks in advance
plz ,what was the problem in the first ecu ? when you wrote the data from the first ecu to the the second used ecu, had the data on the second been erased automatcally ?
@@kostelectronics hi Today I was trying to update a jcb 456zx ems . By mistake I select wrong software. Now no any power is coming in ems. I have another ems Can I repair form this tool
@@dharmendrakumar8361 hmm , whit Ktag and the software not alow to put rong software, she do checksum auto, i try to put another ecu software from another ecu and not alow me
HI! I have a passat with edc17c46 ecu. i also have a doner ecu whith same numbers exept for HW:27 on mine and HW:28 on doner. do you know the difference and if those are compatible?
is this a Ktag clone or a real one? i want to start doing remaps on my own car, but im quite scared to break my ecu because of a fake ktag, but i have no money to buy a real one.
Hi bro i do keys and ecu programming which is a good tool to do it and allso need passwords from the old ecu to reprogram so will good clone ktag do it?
Yes! All is plug and play! The immo is in the EEPROM stored! make sure that you make a full backup and program the full backup tho the donor ECU, then you can connect the new ECU to the car and just turn the key and it runs :)
Thanks mate, Do you know that whether all of data for engine control and data for vehicle identical are contained in the same EEPROM? or separated into several area of memory? Thanks !
Hallo Matthias Würd mich freun wenn du mich Kontaktieren könntest hätte ein zwei frage zu dein Ktag und orange5 bin ich bissl unerfahren in der Sache Mfg Chris aus Bayern
@@diogoprimor4290 yes, i solve my problem to fiat 500 Bosch ME 7.9.10, and i tested olso at another Ecu from ww passat CC petrol car, tested at FORD mondeo mk3 ECU
and was the deler to solve my problem, and dont know how to do that, that why i invest money and time to lear about that problem and how to solve, modify ecu map etc
When you swap the ECU with the same part#, you need only the .epr file, because there is the immo-data located. But you can write all files to be sure that all is exactly the same as on the old ECU.
is it neccesary to have ECU of same part# ? currently I have EDC17c64 - PASSAT but id like to flash overt to another ECU that I had in my jetta also EDC17c64! would I need to remove immobilizer ? or can I just copy stuff over from one computer to another ? I believe on one of them my dealership set the speed limiter too low and I just cant drive that car xD going 55mph in 6th gear and car revs as if it was at 5k rpm
Great job. I felt your excitement.
I'm inspired to get back Into electronics and quite my job as a Marine Electrician. I might be a little rusty but this stuff facinates me.
Can you provide a link to the KTAG you bought?
Thank you for posting! If this video earns any YT money, please invest in a BDM frame. Watching you have to hold that steady so as not brick your new ECU was giving me anxiety. 😨
Hahhaha! :) thanks for watching my stuff! I'm not that far! i don't earn any money with this. But for sure i will invest in a BDM-Frame as soon as possoble!
Greetings from Switzerland! Matthias
😂😂😂
Thanks for this video 🎉 I’m keen to purchase one of these K tag
Hi Kostel, i see your videos, great job, listen i need 1 advice, maybe you CAN help me, i have 1 passat tdi 2000 edc 15x i loose the ecu, i BAYED onother one on ebay and i want to clone for my car, HOW can i do ti? did you have any video? i need ...other tool to do it? need other new key clone? thx for answer me
please answer my questions:
1- in 1.55 on this video you said i do that because i havent locking code . do you mean pin code and if you have it then no need to use ktag?
2- is there other way to read that med9.5.10 by ktag without using the green colored adapter?
3- is your ktag original or chinese?
The number you are not sure its Software
The bigger SW its the newer version of flash file are inside. If you have frf/sgo file you can upgrade or downgrade files ;)
Or if you have full bdm file like you have you can transfer full backup to another it will work ;)
Hi! Very good job. Which conductive sealant do you use ? is it arctic alumina thermal adhesive good? what if not applied before closing ecu. thank you
How to use KTAG KESS KTM Dimsport Full Set 22 pcs adapters to test?
you used an adapter to read the ecu, if i havent the adapter can i use other method ( connecting wires at ecu pins ) ? i mean does software show u many methods for every ecu ?
Sir, can u share how to use bdm flashing on isuzu ECU light trucks like 4hk1 and 4jj1 24volts. Thanks and God Bless
You have a video on how to use that ECU stimulator to test ECM/ ECU
Hi there, thanks for the Video. Do You know if there is any boot pin on the plate on Med9.5.10 to ground on it for read down the eeprom?
Thanks in advance and greets
Hello, thanks for the video. Please where can I get ktag and a bdm frame to buy?
how much is that ktag master kit you got there sir
Hi from sunny South Africa
Thanks for sharing such a informative video Im glad I found your channel.I’m still new to this trade I recently purchased a Chinese clone Kess and k tag
Thus far I managed to do on two separate ecus dpf and egr delete with kess on Mercedes’ sprinter it worked fine.My question is can I use this on a 24 volt vehicle
Thanks in advance
Hello. Did you use a power suppy for ecu? I want to clone my Delphi dcm 3.4 ecu.
Any idea about a course to start learning about ECU programming .i'll be thankful ❤
Great job. Thanks for sharing, please advise which computer operating system you used with KTAG? Windows 7 or 10?
Win7, i don't know if it works on Win10 also, sorry.
@@kostelectronics , thank you very much.
@@kostelectronics 32 or 64 bit? :)
hi kostel very good video
have you got video showing application of thermal adehesive
regards
hi my name sameth from Cambodia and i want to join your group to learn and buy some program thanks
How buy k tag sir
Please some information
And which version but online vs offline
What BDM adapter are you using?
How much is the cost for cloning
Hello so you know what’s the procedure for the med9.1 ecu to clone with ktag. I follow the instructions and it won’t read the back up file
Hello sir, you used original KESS license or a clone? What if my car is not in the list, any advice?
Can i ask you. Under car selection does it have the australian ford xr6 turbo 2006. Engine is barra 245t. As im looking to tune it?
Was the software you got with the clone loaded with viruses?
Don't you have to erase file from the donor ecu before writing?
You just overwrite it
Hi does ktag have truck options. I need to change an acm on an actros
Thanks
Dear,
I need to
replace an ECU on 2008 Audi Q7 4.2 FSI, the engine control module is Bosch MED
9.1.1. Ktag can do the complete job? read & write?
maybe too late for you but yes it can
hello sir and thanks is it possible to do the same with ch341a programmer and with an med9.1 ? or simply do the same than you with an med9.1 ?
hey, which adapter did you use ? thanks
do you have to virginize the new ECU before writing on to it?
no, just write the Data from the original ECU to the new one. Very simple :)
@@kostelectronics that's great. you are really appreciated. great people.
@@kostelectronics without erasing the data first from the new one before writing to it?
@@aliakas1402 Yes, you need to copy the EEPROM and don't need to adapt the ECU afterwards. The EEPROM contains the immo-data.
@@kostelectronics would that not confuse the eprom? Over writing what it allready has including its security pin?
plz ,what was the problem in the first ecu ? when you wrote the data from the first ecu to the the second used ecu, had the data on the second been erased automatcally ?
The first ECU was burned by the customer. He connected the Battery reverse to the car :) BR from Switzerland, Matthias
@@kostelectronics hi
Today I was trying to update a jcb 456zx ems .
By mistake I select wrong software.
Now no any power is coming in ems.
I have another ems
Can I repair form this tool
@@dharmendrakumar8361 hmm , whit Ktag and the software not alow to put rong software, she do checksum auto, i try to put another ecu software from another ecu and not alow me
Hi
Danke fürs Video
Was kostet das k-Tag
Will BDM100 with CH 341 Clone Bosch ME7 4.6? And Bsi for Peugeot 607?
Can this help me change vin# on bosch Ferrari ecu I bought used
HI!
I have a passat with edc17c46 ecu. i also have a doner ecu whith same numbers exept for HW:27 on mine and HW:28 on doner. do you know the difference and if those are compatible?
How much it took to read the ECU
YOU ARE THE BEST MY FRIEND
Why sir you not show did all procses just down ecm photo's please next slowly slowly you done this work
hello sir, may I know this ktag box isn't can clone Korean car ECU?
is this a Ktag clone or a real one? i want to start doing remaps on my own car, but im quite scared to break my ecu because of a fake ktag, but i have no money to buy a real one.
That's the clone. Real version the "k" is a raised bubble logo. Supposed to be 2 like that. Clone is just a regular label.
do you need 12 volt power supply and will 10 amps be enough to boot the ecu?
not need to power up the ECU. K-TAG provides power to the MCU and this is enough.
Hello, where can i get a ktag to buy?
Im trying to back up a MED9.1 and it doesn’t read can you advise me the right procedure please?
what's the exact error? which tool and needle adapter do you use?
@@kostelectronics i figured it out. I was backing up the wrong way with my AutoTuner master. I wasn’t using the back up from the Autotuner files
Hallo woher weißt du wie du die bdm Adapter löten musst ?
Grüße
Sorry to ask is original ktag
Sir i want to purchase k tag from where i can purchase.
Is this clone version work well
Hi have all the same but mine won't read do I need to add any extra cables.
if you want to read a MED9.5.10 then no extra cables required. Maybe your CPU or Flash is dead inside the ECU?
@@kostelectronics when I car works just keeps saying injector 2 and 3 not working.
Have same set up as you. Don't know cums up with grey info box.
Some tag apps get the money that tag ka charger he whats going on amazon pay mill
💐 thank you sir for info
Is this a clone or original ?
Hi bro i do keys and ecu programming which is a good tool to do it and allso need passwords from the old ecu to reprogram so will good clone ktag do it?
Is the immo also kopied on this way?
Yes! All is plug and play! The immo is in the EEPROM stored! make sure that you make a full backup and program the full backup tho the donor ECU, then you can connect the new ECU to the car and just turn the key and it runs :)
is your ktag original
good job
Soo guet ne schwizer uf englisch am tutoriel mache.. würschmers Bärndütsch erklärä😀
Thanks mate,
Do you know that whether all of data for engine control and data for vehicle identical are contained in the same EEPROM? or separated into several area of memory?
Thanks !
i think maybe you do adaptations by vcds software if you faced any problem
Hey i have a question please reply! Where can i purchase everything that you are using?
china! .....you can buy genuine tool from Italy
@@therivalryan aliexpress olso
Hello Brother I Need Your Help , Can I Send You , The Ecu to Clone it ???
Hi. How do you know which 'plugin' to use?
Ktag have before conected a instruction ho tell u how to connect with 1-2 mode
switzer englisch versteht man wenigstens ;) thanks for video
Привет у вас Ktag оригинал?
Does the fake ktag from aliexpress work?
So far yes, but no updates as you know... i didn't made any HW-Rework and i'm happy for the money.
@@kostelectronics but there's a method to recognize fake models that don't work at all or you have to buy it on sixth sense? Does kess 5.017 works?
Good job
Hallo Matthias
Würd mich freun wenn du mich Kontaktieren könntest hätte ein zwei frage zu dein Ktag und orange5 bin ich bissl unerfahren in der Sache
Mfg Chris aus Bayern
hi sir i need install ktga
YOU HAVE I PROG?
Você faz IMMO OFF
Toyota car chiptuner you do bro
Nieźle , na igłach bez ramy ;)
I had no other choice :) BTW: Thanks for watching this boring video and many greetings from Swiss! Matthias
@@kostelectronics Regarts from Poland Bro :)
By the way I’m trying to clone this ecu
Hello brother i need your help
how can i help you?
this original ktag & chainis ktag.
Its software number...
Is this KTAG tool china Version?
thank you fro video
yes is china , not original Alientech, just so in the movie :))
@@roznovanuioan8680 and works well ?
@@diogoprimor4290 yes, i solve my problem to fiat 500 Bosch ME 7.9.10, and i tested olso at another Ecu from ww passat CC petrol car, tested at FORD mondeo mk3 ECU
and was the deler to solve my problem, and dont know how to do that, that why i invest money and time to lear about that problem and how to solve, modify ecu map etc
@@roznovanuioan8680 and where did you buy the ktag?
I read with k tag and i get 3 files...first is file.epr second file.fls and third file 108 kb...which one do i choose ?
When you swap the ECU with the same part#, you need only the .epr file, because there is the immo-data located. But you can write all files to be sure that all is exactly the same as on the old ECU.
For cloning you make full back up of the ori ecu? And then you write with restore ?
@@vasospanou6217 yes!
@@kostelectronics but must you erase data of new used ecu before write to it?
Извращенец) купи себе столик на алиэкспресс, руками стремно держать бдм
This ktag its chinas version
and what ?
Hahahha profi with a 60 usd china tool !
Everybody starts small! i don't say i'm a profi. BR Matthias
😂😂 I can see you don't have money for original KTAG but a cheap chinese bdm frame is 20 euro's ffs!!😂😂😂
is it neccesary to have ECU of same part# ? currently I have EDC17c64 - PASSAT but id like to flash overt to another ECU that I had in my jetta also EDC17c64! would I need to remove immobilizer ? or can I just copy stuff over from one computer to another ? I believe on one of them my dealership set the speed limiter too low and I just cant drive that car xD going 55mph in 6th gear and car revs as if it was at 5k rpm
I was also sonsidering a DUMP but I have no idea how to do it and where to get the file from