Inside of the wheels is no problem, et is small, so no rubbing on axle or suspension, outside my fenders are widen and i have negative camber, otherwise it would be a problem...
Kawazuki I have lowered my swift with 35mm but when going in corners the rubber hits the edge of the fenders. The rest is stock suspension. Biggest problem when lowering is a wrong roll center which is too much below the center of mass which causes the car to lean over a lot in corners
Alejandro Beltran No, 55 is to high, try with 45. Or go to web site willtheyfit.com enter all mesures and you will see how much stretch you will get with that tyres. ;-)
Ovde mozes pogledati koje sve modele imaju, ako planiras da ih pazaris najbolje da imas nekog ko bi mogao da ih uzme tamo i prenese preko grane, da se izbegne carina itd... jr-wheels.com/index.php?action=szukaj&szukaj=JR12_&kat=29#szukaj=JR12_&action=szukaj&kat=29
1 je nocu ali nema to veze komsa je objavio novi snimak, mora da se gleda :D kao i uvek kvalitet snimka je vrh, samo tako nastavi komso
heheh to je za pred spavanje, uzivaj buraz, hvala ti :) Kawazuuuuuuu
Kawazuuuu :D
I was thinking of putting some 195/45 tires on a 15x7.5 rim, any good?
Yes, thats my current setup, you can check video on my YT channel to see how it looks 💪
@@Kawazuki nice 👍
good looking wheels and tire size. 2kg heavier then the enkei's specially made for the gti but offcourse these are much wider and 1" bigger
The wheel this is copied from weights 5,2 kilos in the same size.
Moze li se kod vas u Srbiji kupiti nekih felgi 9x15 8x15, u ovoj Bosni nista nema 😑
How is the fitment on a Swift with 8.5J and et13?
Inside of the wheels is no problem, et is small, so no rubbing on axle or suspension, outside my fenders are widen and i have negative camber, otherwise it would be a problem...
Kawazuki I have lowered my swift with 35mm but when going in corners the rubber hits the edge of the fenders. The rest is stock suspension. Biggest problem when lowering is a wrong roll center which is too much below the center of mass which causes the car to lean over a lot in corners
do jaja je ispao
zalepi sad jos japan racing stiker na zadnju soferku dodaje ti 15 konja
i have 16x7.5 tires 205/55 can i do stretch?
Alejandro Beltran No, 55 is to high, try with 45. Or go to web site willtheyfit.com enter all mesures and you will see how much stretch you will get with that tyres. ;-)
Would be stretchedbut not so mu h and 45 would look nicer but also minimum stretch
do 195/45/15 look good with 15x8 20 offset?
kyoosha looks fine
perfect fit
ClovenShire damn 2 years ago haha
@@three2sedan Oh hahaha didn't see that :P
Koja je cena?
Cena prava sitnica :D
A gde ih mogu kupiti?
Samo preko, gde Japan racing ima svoje predstavnistvo, Nemacka, Slovacka, Madjarska...
Jel imas mozda link neki za ove felne?
Ovde mozes pogledati koje sve modele imaju, ako planiras da ih pazaris najbolje da imas nekog ko bi mogao da ih uzme tamo i prenese preko grane, da se izbegne carina itd...
jr-wheels.com/index.php?action=szukaj&szukaj=JR12_&kat=29#szukaj=JR12_&action=szukaj&kat=29