Being a painter, I know that the true masters are the ones that know how to "save" the mistakes. Watching you do the fixes is where I think I learn the most! Thanks again for all your work!
It's all in the details, and as a true craftsman you definitely understand that.... poor prep leads to a poor product in the end .. I have just started watching your videos, and I'm Impressed with your teaching and attention to detail, by showing any mistakes you also show how to fix them ....I'm a mechanical engineer hands on , not a pencil tyrant. I can not tell you how glad I am to have found this channel,, im refitting an old sailboat and i have see, read , looked up every thing I could on glass work.. and I have learned more it a week watching your videos than all those combined,, you sir are a true master of your craft. And an excellent teacher... subscribed....
I am working on my first boat. I have had many mistakes then having to get the grinder out. But I go back and watch your videos. Thank you so much for the quality and effort you put in your videos.
New boat project. 19yt glassline runabout. Lots in materials. Because i used to fix my own surfboards i thought i knew how to fiberglass. Im so glad i found this channel. I would of done it all wrong.
Love your videos! I've been building a little 8ft boat just to learn to use the materials before moving onto a bigger project, and every step of the way I've gone to your channel for information and I don't think I'd be doing half as well as I am otherwise. I was also convinced by "the internet" that epoxy was the only real choice, and it was you who made it clear that polyester was perfectly valid, especially for a small project like mine. So I just wanted to say thank for doing what you do! It's awesome! :D
I have a project in my garage full of whispies waiting for me to come back and play with it later this week. Got the first layer of a mold set. Waiting on more csm. Gonna have to get very personal with the sander tomorrow night.
Damn Andy, Everyone of your Vids, I learn just how Bad I was, at Laying Glass and the Sad part is I thought I was OK at it. My job , compared to yours, Hell looks like I laid the glass with a Garden Rake and Squeegeed it out with a Snow Shovel but the good news is every one of my Skiff's, are still running and fishing, after twenty some years, with the air bubbles, fold overs and kitty hair, just smoothed it out, covered it with paint, time to Fish. We would take a Twenty foot Sea Ray and turn it into a 20 Radon, Hawaiian style, half cabin, top raked windows, huge fish box, self bailing decks ,large scuppers, over build and glassed inside and out, good fun.
Just installed fixed ports on my boat after watching your video on the subject 20 times..never would have known about VHB tape without you..thank you very much... your videos are fantastic...keep up the good work Dan Tucker naples, florida
Another great video, Really enjoy watching anything you do actually as you always seem to provide little gems along the way. Even though you don't think so, I could quite happily watch you put the other layers on but I understand that I'm probably a little more "nerdy" than your average viewer. What do you expect - I'm English!!
Andy, please film it all, so we can see how technique and approach adapts for each layer (even if you don't get it edited and released next week). Also, maybe add a digital clock on top of the transom so we can see time spin and have a sense of working time.
I used to work at a company that made truck caps back in the late 80's during school and after I graduated. It was hilarious how dangerous and stinky it was.....i remember glass built up on the floors we covered with cardboard getting about 2" to 3" thick built up before cutting out the floors and putting down new cardboard.....that was using the spray chop guns and the "whiskers" where everywhere stuck to every wall, ceiling, tools, just everything. I don't miss getting stabbed from them on a daily basis at all. We would wear full tyvec suits and they would harden up and stick to anything you walked by. The worst was sanding and always having to take cold showers so the itching would be less, but the resin smell just permeated every thing and everybody always knew by your smell where you work. The good old days.....used to wash up everyday in acetone, I'm sure that didn't help my longevity here at all.
Another great production Andy. As mentioned previously, I'm not a boat guy. However I look forward to your channel each week. Your approach and methodology is very level. Thanks for taking the time and big effort you put into our school time. 👍👍Andy can you take us on a road trip with you to the old workshop?
Yes we would like to go on a tour of the old shop. Thanks Andy for all of your videos. They are very helpful. I’m in the middle of replacing the transom in my 1985 Cobalt CM9. I wish I could post something pictures and get your advice. Be safe. Scott
sometimes when watching your vids I make the mistake of thinking to myself "how the hell does he make any money taking this much time on a job" but then I come back to reality and remember he is making instructional videos. nice work
Great video as always Andy, I’ll bet it feels good to be back to laying some glass again. My son and I recently glassed in the floor on our project with huge pieces of 1708 and epoxy. I had it in my head that we should pre-wet the glass. It worked, but it really sucked and it’s far from perfect. In hind site I should have rolled out some epoxy and laid the glass dry like you did.
Probably a long shot, but I recently came across your work and I am about to try my hand at replacing the wooden transom in a fiberglass hull. It's only 15 foot, but I am struggling to get started with the glass part of the rebuild. I cut out the interior fiberglass "wall" to access the rotten wood that was between said wall, and the exterior stern wall. Now all I have to do is replace the wood and glass it back up... but I don't know where to start first...
Great video as always Andy. Always look forward to seeing more episodes. Had to glass in the underside of my deck core recently 😬 😂 dam I hate upside down glass work 😂 few bits didn't go so well,so let it set up, will grind the few bad sections back and re glass using CSM.
If only glassing was as easy as you make it look...Still to do my transom, don't fancy a trip to UK and help haha. Your videos have been a massive help to me so far thanks Andy.
Been enjoying all of your videos Andy, giving me a little more confidence on restoring my Banshee sailboat. I hope you have researched a great shoulder surgeon for your cuff repair and follow his recovery recommendations. I went through several repairs before I found the right one. Overcompensating with your good shoulder can lead to issues down the road. Love all the information you provide tp us. Best regards!
Loving the candid discussion you use in your videos Andy! Covering the potential problems of the task at hand is very useful and sets your work apart. Thanks for today's tip on overhead surfaces. I have the ceiling in the galley of my sailboat to glass and have been wondering about how to not make a giant mess. The plywood was rain water damaged (2 loose screws around the campanionway destroyed the value) when I purchased the boat. After I get the surface prepared (one layer of plywood remains) I expect it to suck up quite a bit of resin, so I'm planning to wet that out and let it harden before re sanding the surface and applying the glass as you suggested on sticky resin. My question is: is it okay to use a fresh batch of resin over the tacky resin? Will the surface get slippery, will the glass slide around if I do that? Thanks for all that you do and good luck with the final clean up and sale of the old facility.
Those whiskers take some time if we want the job done right. There is always some bubbles that are very hard to get rid off, and some that are going to come back after we thought we fixed them. Very good job, as usual.
For sure! That's part of why I want to get into resin infusion for as much as possible for the rest of my current boat project :) either with vinylester or epoxi. The boat is polyester but has quite a few years on it and I've done a lot of the work on it with vinylester for superior bonding and strength. I think we even built the new foredeck with vinyl and we glued the deck to the hull with a vinylester based glue. It smells a good bit more so infusion would nice :)
Sooooo satisfying. Great to seeing the transom take shape. How many layers total will the tabs and glassing over the koosa take in total for strength? EDIT, ah gotcha, 4 total. Guessing all those outboards hanging so far back means it needs to be much stronger than just a couple of outdrives from inboard engines? Rinse and repeat is good!! ASMR glassing video! Very relaxing! Old shop road trip would also be cool!
Hell yeah Andy! I always like the mini Purdy roller trick you showed me. I had fucking absolutely no air bubbles on the outside of the transom. Seven layers. 1708 of course.But damn I wish I would’ve ran Cuso board. Back then you were still running wood in transoms. Thanks brother! Where’s your damn mask!
Hi Andy Love your work I’ve bought my first fibreglass boat and want to increase the height of the transom Any videos or tips I’m going from 20 to 25 inches Thanks
Another great job Andy I’ve been watching your videos for a while they’ve helped me immensely with a 1st time project on stringers fuel tank etc.. 1 ? I’d like to clarify I believe you address in another video like when patching a hole the glass patches I thought were to go from smaller to largest increments?? I’ve seen & read 2 different theories could you please clarify. Thanks again for great job, I’d love to come visit your shop I’ve converted an old chicken barn into my are it works for me, thank you
time suck fiberglass video AND a trip to the old shop? YES PLEASE!!!! :)
2 ปีที่แล้ว
You make working with fiberglass look easy. It's deceptive, the fiberglass I know is a real btch! :D Thanks for your tips and tricks, they will be really helpful with my next project!
So wish you where located near Texas. Have a boat that I'm not sure how to get it done. All your tips, and tricks are great but none really apply to my issue. Would love for you to look at it to tell me what to do. Don't have anyone located who does work on fiber glass boats. Only place I can go is over 4 hours away and that's just to have him look at it... sad.. keep it up.
I want to start with, I've watched a ton of your videos in the last few days. Back story. I got a free fiberglass canoe. It has a few cracks and holes all the way through. Forgive me for not being good with boat terminology. The entire bottom of the boat is flexy. There is micro cracks throughout. I am fairly confident i will be able to fix the cracks and holes, those are straight forward. Can i just laminate a single layer of weave type glass on the outside to repair the micro cracks and to add a bit of strength? I don't want to add too much glass to keep the boat light. I have sanded through the gel on half the boat and used a bur to completely open and taper the holes and it seems the boat is like 80% resin and very little actual glass. Please let me know if I'm way off base here?
Friend of mine, who owns a body shop (very successful one by the way) was a master fiberglass worker, a good friend of Don McCurdy at Champion Boats and the go to guy out here east of the Mississippi. Of course he's getting on in age now and you'd think he'd dedicate some of his business towards boat repair etc. Such is not the case though as he can't find anyone to teach the art to (and it is an art being able to match colors, flake, etc.). Young kids today don't want anything to do with it, unless it's tech related etc. He himself doesn't do it anymore due to his age, etc. but the work he does deign to take on is flawless and matches perfectly. I've seen him take out whole sections of boats and transoms and replace them to near perfect condition, actually stronger than the original. But, once he's gone there's no one around here to carry on his expertise. folks just don't want to put up with the fumes, dust and other factors associated with fiberglass work. More importantly, most folks don't want to pay the price for quality repairs preferring instead to DIY their own stuff.
It's the paying price. I do fiberglass repairs far and few between because I refuse to cut corners to save on labor costs. If the incling even comes up, I tell them that I am not the person to do the repair. My name will not be noted to shoddy workmanship.
Did you complete the transom on the 25 as I watched all of your videos up until covering the Coosa with FG however it appeared to be the last video and I was waiting to see how you tied in the stringers that were cut on P & Stbd. side as well as did you fabricate and install knee braces between the transom and the ctr stringer as well as the P & S stringers. Because the boat originally had I O 's most of the engine weight and forward thrust was absorbed by the motor mounts that were tied into the stringers but with the I O power the transom was under forward thrust, now with the OB's the transom is under tension in neutral and there is nothing tieing the forward forces to the hull or the stringers. Do you plan on additional videos as the project is finished. Thank you
Even if it’s another vid of laying layers of glass I am very fine with that cause every time I watch I learn something. But guess we will see. I’m heading to my boat now to do core replacement and prep for epoxy primer and paint.
I have a houseboat that I’m renovating and I noticed the outside wall panels have waves. Do you have a video or can you give me any suggestions on how to treat those areas. Thanks for your input.
Andy I'm confused about where you use epoxy and where you use polyester. Can you use either one over the other? I think you put the panel in with epoxy now you are using polyester? You may have already have covered this in other videos. Please help Thomas
I'm getting ready to tab in my transom. On the second and third layers of tabbing do you make the pieces a little bit bigger than the last layer? Or do you cut them all the same? Thank you for all your videos. They have gave me the confidence to do this project that I have been putting off for awhile.
what type of fiberglass material do you use first? 1.5 Oz chop strand? then 1708 bi axial? Im new and trying to get ready for my 1988 speed boat repair thanks
Hi Andy I am new to your channel and find the info very valuable. I coated a boat project with Alexseal coating. I have been told that after a period of thime I can not just roughen up the surface and apply the last two coats. what is your opinion? Richard
I have a 1989 starfire 245 and want to replace the transom. I just can’t figure out the best way to do it the the capping on top of the boat. And I’d love to do it from the inside but unfortunately I think the outside will be best because the layout inside
Andy. Man I have commented before, but where do you get your soundtracks, . I have yet to dislike any og your toe tappers. And as alwys,. very useful, informative, smooth videos Very Nice Work.
Yes, no problem with that as long as both materials are using the same hardener (Mek-P). If the putty is using a paste hardener then not sure about that one. But poly and vinyl are perfectly compatible otherwise after cure regardless.
thank you for this video! i was wondering i am currently rebuilding my catamaran powerboat that is build from kevlar and original it has a wooden transom. but i am gonna replace it for 38mm (1.5inch) coosa! but i was wondering how much kevlar should i put over the coosa board because the original boat was wooden transom with a thin layer of kevlar and 2 small knee's made from polyurethane wrapped with kevlar (thick layer) and two HUGE transom knee's. i am also gonna replace the structural bulk heads that are okoume to coosa but is it really strong enough if i put exactly the same thickness coosa as there was wood or should i increase the thickness when going for coosa. alot of questions but thanks in advance.
I bet those white spots are that material in the mat that dissolves when you wet it out . I would have used a full size roller to wet that out it would be much faster . I was wondering about whether that resin youre using has any wax in it?
Hi Andy, Noticed you using garbage bags to wet out your 1708. Here's a trick. Try using a plastic magic carpet sled kids use to go tobogganing. Lies flat cleans up easily and any remaining epoxy chips off when you roll it up after it hardens. Periodically I'll give it a spray with silicone if things start to adhere.
1708, I roll the surface I'm putting it on lightly (just to seal it up) and I also roll resin on the chop strand side of the 1708 before laying it down. Just takes way too much resin and time to get it through the face even when you coat the surface. Not like the chop strand will come off with all the stitching.
Hi Andy, enjoyed the vid as always. Quick question, since you are using Poly resin, is it not necessary to start with a layer of chopped strand mat for improved adhesion?
I think he's using something along the lines of 1708, which is glass cloth stitched to chopped strand mat: "Biaxial (+/-45 degree) Cloth with 3/4 oz mat backing. The fiberglass tows are held together by light nylon stitching ...The flat non-crimped fibers yield reduced print-thru and higher stiffness than other woven fabrics. The mat backing adds extra thickness and makes for a smoother finished product when applied over scratches and dents. This cloth is ideal for repairs, tabbing, and reinforcing.>> (Jamestown blurb) He's applying the CSM side to the hull, which is why it looks like straight glass cloth in the clip.
Letting 1st layer fully cure before adding 2nd layer ? Won't you have to SandSand all those little weaves ? Does Polyester Amine Blush ? How will you deal with that ? Suggestion: Use a release fabric, like nylon flag material -- it leaves a good mechanical pattern & takes away the amine blush. Agree ? Thanks Again.
Well, duh -- You are likely using Laminating Polyester Resin, which does Not cure hard, does Not need sanding between coats, and it Does remain tacky for as many coats as needed, until covered with PVA or poly/gelcoat With Wax. Sorry for the brain-freeze, but do try that nylon flag material as a release fabric for between cured coats of epoxy -- to leave a good textured surface And take away the amine blush when removed.
Resin will fill. No amine with UPRs, once laminate reaches >25 barcol hardness, you can immediately add more layers. Modern DCPD blended resins yield a tack-free finish, and can achieve a chemical bond as long as successive laminations are completed in less than 72 hours from each other. Only a quick scuff sand to remove "tent poles" is required.
24 packs of 4" double chip brushes, 48 packs of 2" chip brushes. Under 50 cents a brush, it's cheaper to throw away than the cost of solvent to clean them.
You've focused on this transition area in both of the past 2 videos on this section. First, breaking the edge by sanding to ensure the glass doesnt have to conform to a 90 degree angle and now using filling to create a curved filet. Why not just use a router on the koosa board (prior to instalL) to deal with most of the edges? Would that have created a worse situation where you end up with even more whisps?
You can, but there's usually still a small lip left from the router. Putty is easier and less dusty. Also, Coosa dust is unbearable in terms of "itch".
Further to that, I wondered why the koosa board was not bevelled, so that the junction required less filleting, and so that there was not such an abrupt change in panel stiffness (which presumably acts as a stress concentration zone) around the boundary. I'm sure there will be a good reason, just curious as to what it might be.
Being a painter, I know that the true masters are the ones that know how to "save" the mistakes. Watching you do the fixes is where I think I learn the most! Thanks again for all your work!
Restore like no end. How. Much a new boat?
It's all in the details, and as a true craftsman you definitely understand that....
poor prep leads to a poor product in the end ..
I have just started watching your videos, and I'm Impressed with your teaching and attention to detail,
by showing any mistakes you also show how to fix them ....I'm a mechanical engineer hands on , not a pencil tyrant.
I can not tell you how glad I am to have found this channel,, im refitting an old sailboat and i have see, read , looked up every thing I could on glass work.. and I have learned more it a week watching your videos than all those combined,, you sir are a true master of your craft. And an excellent teacher... subscribed....
This is one of your better videos. Showing the story rather than telling the story is much better.
I am working on my first boat. I have had many mistakes then having to get the grinder out. But I go back and watch your videos. Thank you so much for the quality and effort you put in your videos.
New boat project. 19yt glassline runabout. Lots in materials. Because i used to fix my own surfboards i thought i knew how to fiberglass. Im so glad i found this channel. I would of done it all wrong.
Absolutely love the format of this video. Couple time lapses with music and then stopping to cover important stuff... Incredible man. Thanks!
A true Craftsman! A dying breed.
Love your videos!
I've been building a little 8ft boat just to learn to use the materials before moving onto a bigger project, and every step of the way I've gone to your channel for information and I don't think I'd be doing half as well as I am otherwise. I was also convinced by "the internet" that epoxy was the only real choice, and it was you who made it clear that polyester was perfectly valid, especially for a small project like mine.
So I just wanted to say thank for doing what you do! It's awesome! :D
Watching you work is an education in itself. Thank you!
Great video. I have been doing DIY fiberglass work for 40 years. But I learned a lot in this video. Many great tips in there. Thank you.
I have a project in my garage full of whispies waiting for me to come back and play with it later this week. Got the first layer of a mold set. Waiting on more csm. Gonna have to get very personal with the sander tomorrow night.
Damn Andy, Everyone of your Vids, I learn just how Bad I was, at Laying Glass and the Sad part is I thought I was OK at it. My job , compared to yours, Hell looks like I laid the glass with a Garden Rake and Squeegeed it out with a Snow Shovel but the good news is every one of my Skiff's, are still running and fishing, after twenty some years, with the air bubbles, fold overs and kitty hair, just smoothed it out, covered it with paint, time to Fish. We would take a Twenty foot Sea Ray and turn it into a 20 Radon, Hawaiian style, half cabin, top raked windows, huge fish box, self bailing decks ,large scuppers, over build and glassed inside and out, good fun.
Just installed fixed ports on my boat after watching your video on the subject 20 times..never would have known about VHB tape without you..thank you very much... your videos are fantastic...keep up the good work Dan Tucker naples, florida
Watching to THIS, makes it feel So Easy and gives the Guts to start on our own !
Lets get the hands on the dough !
Very nice work. Would like to see old shop and all the layers added to transom. It's worth the watch always. Thanks for the videos. See ya next video.
Great job. I'll be doing this shortly. I'm Taking the engine and all the hardware out this Sunday. April 14th 2024 so be it.
Another great video, Really enjoy watching anything you do actually as you always seem to provide little gems along the way. Even though you don't think so, I could quite happily watch you put the other layers on but I understand that I'm probably a little more "nerdy" than your average viewer. What do you expect - I'm English!!
Smart idea of hot coating fillet and laminate at the same time. I have gotten somany great tips from you. Thanks, mate.
Can not get enough of this hand laid glass work. NICE!!
Andy, please film it all, so we can see how technique and approach adapts for each layer (even if you don't get it edited and released next week). Also, maybe add a digital clock on top of the transom so we can see time spin and have a sense of working time.
This video came out at the perfect time. The next step in my boat restoration is to tab in and layup my new Transom.
I used to work at a company that made truck caps back in the late 80's during school and after I graduated. It was hilarious how dangerous and stinky it was.....i remember glass built up on the floors we covered with cardboard getting about 2" to 3" thick built up before cutting out the floors and putting down new cardboard.....that was using the spray chop guns and the "whiskers" where everywhere stuck to every wall, ceiling, tools, just everything. I don't miss getting stabbed from them on a daily basis at all. We would wear full tyvec suits and they would harden up and stick to anything you walked by. The worst was sanding and always having to take cold showers so the itching would be less, but the resin smell just permeated every thing and everybody always knew by your smell where you work. The good old days.....used to wash up everyday in acetone, I'm sure that didn't help my longevity here at all.
Another great production Andy. As mentioned previously, I'm not a boat guy. However I look forward to your channel each week. Your approach and methodology is very level. Thanks for taking the time and big effort you put into our school time. 👍👍Andy can you take us on a road trip with you to the old workshop?
If there's some interest in it, sure :-)!
Yes we would like to go on a tour of the old shop. Thanks Andy for all of your videos. They are very helpful. I’m in the middle of replacing the transom in my 1985 Cobalt CM9. I wish I could post something pictures and get your advice. Be safe. Scott
sometimes when watching your vids I make the mistake of thinking to myself "how the hell does he make any money taking this much time on a job" but then I come back to reality and remember he is making instructional videos. nice work
Your prep work is so important! The transom is looking great.
That's slick putting the resin on a bag that you can toss. Thanks for sharing.
Nice work and great presentation, Andy.
Great video as always Andy, I’ll bet it feels good to be back to laying some glass again. My son and I recently glassed in the floor on our project with huge pieces of 1708 and epoxy. I had it in my head that we should pre-wet the glass. It worked, but it really sucked and it’s far from perfect. In hind site I should have rolled out some epoxy and laid the glass dry like you did.
Thanks Andy. Great instructional video and certainly very helpful for my glassing jobs.
Been so long since I've seen you do any glass work I'd forgotten that you're actually pretty good at it ;)
Probably a long shot, but I recently came across your work and I am about to try my hand at replacing the wooden transom in a fiberglass hull. It's only 15 foot, but I am struggling to get started with the glass part of the rebuild. I cut out the interior fiberglass "wall" to access the rotten wood that was between said wall, and the exterior stern wall. Now all I have to do is replace the wood and glass it back up... but I don't know where to start first...
The move kind of set you back....but it looks like you are settling in now. I'm glad you are back!
Great work. I work in industrial fiberglass in Barbados. Love the work. Cheers
so satisfying watching you on the job and less on the talk.
Great video as always Andy. Always look forward to seeing more episodes.
Had to glass in the underside of my deck core recently 😬 😂 dam I hate upside down glass work 😂 few bits didn't go so well,so let it set up, will grind the few bad sections back and re glass using CSM.
If only glassing was as easy as you make it look...Still to do my transom, don't fancy a trip to UK and help haha. Your videos have been a massive help to me so far thanks Andy.
Been enjoying all of your videos Andy, giving me a little more confidence on restoring my Banshee sailboat. I hope you have researched a great shoulder surgeon for your cuff repair and follow his recovery recommendations. I went through several repairs before I found the right one. Overcompensating with your good shoulder can lead to issues down the road. Love all the information you provide tp us.
Best regards!
I'm so glad to hear you say that about 1708 it drives me crazy with a little white spots! 😜
Good progress Andy.....funny how the weeks just disappear.
Loving the candid discussion you use in your videos Andy! Covering the potential problems of the task at hand is very useful and sets your work apart. Thanks for today's tip on overhead surfaces. I have the ceiling in the galley of my sailboat to glass and have been wondering about how to not make a giant mess.
The plywood was rain water damaged (2 loose screws around the campanionway destroyed the value) when I purchased the boat.
After I get the surface prepared (one layer of plywood remains) I expect it to suck up quite a bit of resin, so I'm planning to wet that out and let it harden before re sanding the surface and applying the glass as you suggested on sticky resin.
My question is: is it okay to use a fresh batch of resin over the tacky resin? Will the surface get slippery, will the glass slide around if I do that?
Thanks for all that you do and good luck with the final clean up and sale of the old facility.
cheers man learnt a lot from your vids. currently fiberglassing two 14 footers. cheers.
I just learned a couple of tricks. Thank you!
Those whiskers take some time if we want the job done right. There is always some bubbles that are very hard to get rid off, and some that are going to come back after we thought we fixed them. Very good job, as usual.
For sure! That's part of why I want to get into resin infusion for as much as possible for the rest of my current boat project :) either with vinylester or epoxi. The boat is polyester but has quite a few years on it and I've done a lot of the work on it with vinylester for superior bonding and strength. I think we even built the new foredeck with vinyl and we glued the deck to the hull with a vinylester based glue. It smells a good bit more so infusion would nice :)
Love your vids, so satisfying watching fiberglassing done by a pro. One question , why do you prefer polyester over epoxy. Isnt epoxy stronger?
Sooooo satisfying. Great to seeing the transom take shape. How many layers total will the tabs and glassing over the koosa take in total for strength? EDIT, ah gotcha, 4 total. Guessing all those outboards hanging so far back means it needs to be much stronger than just a couple of outdrives from inboard engines? Rinse and repeat is good!! ASMR glassing video! Very relaxing! Old shop road trip would also be cool!
Hell yeah Andy! I always like the mini Purdy roller trick you showed me. I had fucking absolutely no air bubbles on the outside of the transom. Seven layers. 1708 of course.But damn I wish I would’ve ran Cuso board. Back then you were still running wood in transoms. Thanks brother! Where’s your damn mask!
Hi Andy
Love your work
I’ve bought my first fibreglass boat and want to increase the height of the transom
Any videos or tips
I’m going from 20 to 25 inches
Thanks
awesome as usual. please video the trip to the old workshop. how long before the bracket and engines get hung??
Another great job Andy I’ve been watching your videos for a while they’ve helped me immensely with a 1st time project on stringers fuel tank etc.. 1 ? I’d like to clarify I believe you address in another video like when patching a hole the glass patches I thought were to go from smaller to largest increments?? I’ve seen & read 2 different theories could you please clarify. Thanks again for great job, I’d love to come visit your shop I’ve converted an old chicken barn into my are it works for me, thank you
time suck fiberglass video AND a trip to the old shop? YES PLEASE!!!! :)
You make working with fiberglass look easy. It's deceptive, the fiberglass I know is a real btch! :D Thanks for your tips and tricks, they will be really helpful with my next project!
So wish you where located near Texas. Have a boat that I'm not sure how to get it done. All your tips, and tricks are great but none really apply to my issue. Would love for you to look at it to tell me what to do. Don't have anyone located who does work on fiber glass boats. Only place I can go is over 4 hours away and that's just to have him look at it... sad.. keep it up.
I want to start with, I've watched a ton of your videos in the last few days. Back story. I got a free fiberglass canoe. It has a few cracks and holes all the way through. Forgive me for not being good with boat terminology. The entire bottom of the boat is flexy. There is micro cracks throughout. I am fairly confident i will be able to fix the cracks and holes, those are straight forward. Can i just laminate a single layer of weave type glass on the outside to repair the micro cracks and to add a bit of strength? I don't want to add too much glass to keep the boat light. I have sanded through the gel on half the boat and used a bur to completely open and taper the holes and it seems the boat is like 80% resin and very little actual glass. Please let me know if I'm way off base here?
Nice work. I learn a lot from your videos.
Film the trip to your old shop. Everyone would love to see what it looks like now.
Thanks for sharing your day
Friend of mine, who owns a body shop (very successful one by the way) was a master fiberglass worker, a good friend of Don McCurdy at Champion Boats and the go to guy out here east of the Mississippi. Of course he's getting on in age now and you'd think he'd dedicate some of his business towards boat repair etc. Such is not the case though as he can't find anyone to teach the art to (and it is an art being able to match colors, flake, etc.). Young kids today don't want anything to do with it, unless it's tech related etc. He himself doesn't do it anymore due to his age, etc. but the work he does deign to take on is flawless and matches perfectly. I've seen him take out whole sections of boats and transoms and replace them to near perfect condition, actually stronger than the original. But, once he's gone there's no one around here to carry on his expertise. folks just don't want to put up with the fumes, dust and other factors associated with fiberglass work. More importantly, most folks don't want to pay the price for quality repairs preferring instead to DIY their own stuff.
It's the paying price. I do fiberglass repairs far and few between because I refuse to cut corners to save on labor costs. If the incling even comes up, I tell them that I am not the person to do the repair. My name will not be noted to shoddy workmanship.
You have a number or address
Just a question. Will you connect stringers to the transom? I guess it is coming and I am being impatient 😁. Nice work!
Did you complete the transom on the 25 as I watched all of your videos up until covering the Coosa with FG however it appeared to be the last video and I was waiting to see how you tied in the stringers that were cut on P & Stbd. side as well as did you fabricate and install knee braces between the transom and the ctr stringer as well as the P & S stringers. Because the boat originally had I O 's most of the engine weight and forward thrust was absorbed by the motor mounts that were tied into the stringers but with the I O power the transom was under forward thrust, now with the OB's the transom is under tension in neutral and there is nothing tieing the forward forces to the hull or the stringers. Do you plan on additional videos as the project is finished.
Thank you
Even if it’s another vid of laying layers of glass I am very fine with that cause every time I watch I learn something. But guess we will see. I’m heading to my boat now to do core replacement and prep for epoxy primer and paint.
I have a houseboat that I’m renovating and I noticed the outside wall panels have waves. Do you have a video or can you give me any suggestions on how to treat those areas. Thanks for your input.
Nice channel and work! What is the dark gray panel you are laminating over please?
I believe Coosa :-)
Andy
I'm confused about where you use epoxy and where you use polyester. Can you use either one over the other? I think you put the panel in with epoxy now you are using polyester? You may have already have covered this in other videos. Please help
Thomas
I am using Epoxy, what hardener & epoxy would you suggest. I have a heater, but it is cool here
Nice Job Andy....
do you have any videos of removing the cap from a boat ? thanks
What's in your opinion on the pourable transom repair? Like carbon bond?
It seems like this would have been a really excellent project to resin-infuse rather than fight the multiple layer time crunch. Did you consider it?
Andy, did you have a calculation for the thickness of the new transom? Will it be different if you hang a pair of outboards?
I'm about to start cutting on a bayliner capri cuddy 1600 if you know this style of boat do you have any tips on where I should start cutting?
I'm getting ready to tab in my transom. On the second and third layers of tabbing do you make the pieces a little bit bigger than the last layer? Or do you cut them all the same? Thank you for all your videos. They have gave me the confidence to do this project that I have been putting off for awhile.
what type of fiberglass material do you use first? 1.5 Oz chop strand? then 1708 bi axial? Im new and trying to get ready for my 1988 speed boat repair thanks
Hi Andy I am new to your channel and find the info very valuable. I coated a boat project with Alexseal coating. I have been told that after a period of thime I can not just roughen up the surface and apply the last two coats. what is your opinion?
Richard
Hello Andy I am a bit confused. Did you not epoxy the coosa in place? and now your going over it with poly?
Thanks
I have a 1989 starfire 245 and want to replace the transom. I just can’t figure out the best way to do it the the capping on top of the boat. And I’d love to do it from the inside but unfortunately I think the outside will be best because the layout inside
Looks great!
Andy.
Man I have commented before, but where do you get your soundtracks, . I have yet to dislike any og your toe tappers.
And as alwys,. very useful, informative, smooth videos
Very Nice Work.
I get all my music from Epidemic Sound (it's a pay service but well worth it!)
👍👍
Can you lay vinylester resin over polyester putty? (Wet)
Awesome video!
Yes, no problem with that as long as both materials are using the same hardener (Mek-P). If the putty is using a paste hardener then not sure about that one. But poly and vinyl are perfectly compatible otherwise after cure regardless.
@@boatworkstoday thanks! Your vidoes and guides helps me alot with my projekt!
Time suck and finish what you can. We will be here for the quality over quantity.
great job, thanks
thank you for this video! i was wondering i am currently rebuilding my catamaran powerboat that is build from kevlar and original it has a wooden transom. but i am gonna replace it for 38mm (1.5inch) coosa! but i was wondering how much kevlar should i put over the coosa board because the original boat was wooden transom with a thin layer of kevlar and 2 small knee's made from polyurethane wrapped with kevlar (thick layer) and two HUGE transom knee's. i am also gonna replace the structural bulk heads that are okoume to coosa but is it really strong enough if i put exactly the same thickness coosa as there was wood or should i increase the thickness when going for coosa. alot of questions but thanks in advance.
I bet those white spots are that material in the mat that dissolves when you wet it out . I would have used a full size roller to wet that out it would be much faster . I was wondering about whether that resin youre using has any wax in it?
Hi Andy, Noticed you using garbage bags to wet out your 1708. Here's a trick. Try using a plastic magic carpet sled kids use to go tobogganing. Lies flat cleans up easily and any remaining epoxy chips off when you roll it up after it hardens. Periodically I'll give it a spray with silicone if things start to adhere.
Are there no holes for the bungs? Or will they be drilled after?
Hey man I work at a boat plant and I just and grind what's the best way to get fiberglass out and off skin I have tried everything
Great video. Just one quick question are you supposed to alternate each layer of tabbing with face layers? In other words is it tab-face-tab etc..
Yea, that's what I'll be doing :-) Next round will be larger tabbing all around, then another face, and repeat :-)
1708, I roll the surface I'm putting it on lightly (just to seal it up) and I also roll resin on the chop strand side of the 1708 before laying it down. Just takes way too much resin and time to get it through the face even when you coat the surface. Not like the chop strand will come off with all the stitching.
Hi Andy, enjoyed the vid as always. Quick question, since you are using Poly resin, is it not necessary to start with a layer of chopped strand mat for improved adhesion?
I think he's using something along the lines of 1708, which is glass cloth stitched to chopped strand mat: "Biaxial (+/-45 degree) Cloth with 3/4 oz mat backing. The fiberglass tows are held together by light nylon stitching ...The flat non-crimped fibers yield reduced print-thru and higher stiffness than other woven fabrics.
The mat backing adds extra thickness and makes for a smoother finished product when applied over scratches and dents.
This cloth is ideal for repairs, tabbing, and reinforcing.>> (Jamestown blurb)
He's applying the CSM side to the hull, which is why it looks like straight glass cloth in the clip.
Great stuff!
Anything you do different in this video if you had been using epoxy?
Looking good.
Letting 1st layer fully cure before adding 2nd layer ? Won't you have to SandSand all those little weaves ? Does Polyester Amine Blush ?
How will you deal with that ?
Suggestion: Use a release fabric, like nylon flag material -- it leaves a good mechanical pattern & takes away the amine blush. Agree ?
Thanks Again.
Well, duh -- You are likely using Laminating Polyester Resin, which does Not cure hard, does Not need sanding between coats, and it Does remain tacky for as many coats as needed, until covered with PVA or poly/gelcoat With Wax.
Sorry for the brain-freeze, but do try that nylon flag material as a release fabric for between cured coats of epoxy -- to leave a good textured surface And take away the amine blush when removed.
Resin will fill. No amine with UPRs, once laminate reaches >25 barcol hardness, you can immediately add more layers. Modern DCPD blended resins yield a tack-free finish, and can achieve a chemical bond as long as successive laminations are completed in less than 72 hours from each other. Only a quick scuff sand to remove "tent poles" is required.
Just curious as too how many times you've gotten resin on your hair 😂 happens to me almost every time I touch resin
Let's see all four layers happening on video ... :-) It actually is sort of relaxing to watch.
Andy, I attempted to write to you through BWT website but got locked out. Any suggestions?
Tried again this morning and again got locked out. Seeking to contact you. Thanks
I always wonder how many brushes you need in a day. Don't they get hard at the end of every batch of polyester?
Yea, I buy the cheapest brushes I can find in bulk for glasswork. TAB brushes (Throw Away Brushes) lol
24 packs of 4" double chip brushes, 48 packs of 2" chip brushes. Under 50 cents a brush, it's cheaper to throw away than the cost of solvent to clean them.
You've focused on this transition area in both of the past 2 videos on this section. First, breaking the edge by sanding to ensure the glass doesnt have to conform to a 90 degree angle and now using filling to create a curved filet. Why not just use a router on the koosa board (prior to instalL) to deal with most of the edges? Would that have created a worse situation where you end up with even more whisps?
He answers that question starting @5:10!
You can, but there's usually still a small lip left from the router. Putty is easier and less dusty. Also, Coosa dust is unbearable in terms of "itch".
Further to that, I wondered why the koosa board was not bevelled, so that the junction required less filleting, and so that there was not such an abrupt change in panel stiffness (which presumably acts as a stress concentration zone) around the boundary. I'm sure there will be a good reason, just curious as to what it might be.
Do you not need to wear any face or eye protection when cutting the fibreglass?
Hi I have a crack in my inner hull, I do not quite know what to do
Hi but random but I have a few questions for you? Do you have a way of contacting privately?