Id like to note something here for anyone installing this on a 2018 or newer 4runner. I installed this unit on a 2022 4runner last week using this exact same harness. (TPH-021). Install was seamless. However, i never got the blue/green flashes from the unit indicating that the module was actively calibrating. I was also getting yellow/red faults. I did some digging on REDARCS website and found a write up in the FAQ section. According to the information on their website the harness in this video interferes with the factory wiring bc of a diode that's factory installed and prevents the module from auto calibrating due to feedback voltage. REDARC instructs to purchase the universal harness TPH-025 and splice it with the factory harness that comes factory with the 2018+ 4runners I don't know if this guy had the same issues i had with this harness or not. I advise anyone to take this video with a grain of salt and do the research pertaining to the specific year model of your vehicle. Good luck!
I installed the Redarc Tow Pro Elite with just stick it on the fuse box using double sided tape beside parking brake in my 4runner. Nice to watch your video sharing!
I watched the entire video to find out HOW the controller connects to the Runner. You left that out! Can you confirm my 2022 4Runner 4x4 Limited has the connector to plug into the wiring harness from Redarc?
What is the most minimally invasive way requiring no drilling of holes. I also need it secured so it doesn’t rattle or make any loud noises in cab as this vehicle is meant to go off-road.
I followed your instructional video. But, after installing it and started the 4Runner I didnt see the Led blue or green lit as I press the control knob. Whereas when your friend first started his 4Runner after the install I saw you pressed the knob and it lighted blue. Do you have any idea why mine didnt? TIA🤓
They don’t really power up until you connect a trailer, maybe double check it when you connect your trailer? With the plug and play harness it shouldn’t have any issues.
@@ProjectBasecamp Oh ok, The reason I was concern was I saw you pressed the control knob and the blue led lit. So I tried the same sonI thought I connected it incorrect. Thanks much for the quick response and more power to your channel!💪
I wire it to the factory harness according to there website but the right signal and brake lights doesn’t work.after contacting customer service ,they admit the wiring is good but they ask me to buy the plug and play cable .guess what still not working.don’t but this product for Toyota 4 runner
Id like to note something here for anyone installing this on a 2018 or newer 4runner. I installed this unit on a 2022 4runner last week using this exact same harness. (TPH-021). Install was seamless. However, i never got the blue/green flashes from the unit indicating that the module was actively calibrating. I was also getting yellow/red faults. I did some digging on REDARCS website and found a write up in the FAQ section. According to the information on their website the harness in this video interferes with the factory wiring bc of a diode that's factory installed and prevents the module from auto calibrating due to feedback voltage. REDARC instructs to purchase the universal harness TPH-025 and splice it with the factory harness that comes factory with the 2018+ 4runners I don't know if this guy had the same issues i had with this harness or not. I advise anyone to take this video with a grain of salt and do the research pertaining to the specific year model of your vehicle. Good luck!
Thanks! I pinned your comment just in case someone needs it
@@ProjectBasecamp No problem! Did this guy ever run into this issue? What year model is his 4runner?
@@two_legit1832 his is a 2018, no problems thus far!
@@ProjectBasecamp Good deal. I just can't understand why I had these problems using the exact same parts. 🤷♂️
@@two_legit1832 Was yours the Liberty or Elite model?
I installed the Redarc Tow Pro Elite with just stick it on the fuse box using double sided tape beside parking brake in my 4runner. Nice to watch your video sharing!
Thanks for checking it out!
thats what I am thinking, just stick this sucker to the side wall with some double sided tape. Doing the install in a day or 2. Did yours hold up?
So did i miss the part where the controller gets hooked up the truck? I just saw the part where it was zip tied behind the brake pedal.
Yeah I suppose I didn’t get that part, but it’s a direct connection, so it should be pretty easy to find
@@ProjectBasecamp thank you! I will be ordering the same exact parts! I don’t have to do anything with the 7pin harness in the back correct?
@johnshredsalot1295 Nope, not at all!
I watched the entire video to find out HOW the controller connects to the Runner. You left that out! Can you confirm my 2022 4Runner 4x4 Limited has the connector to plug into the wiring harness from Redarc?
Your work bench clutter is giving me an anxiety attack 😮😂
Getting the plastic dash pieces was the biggest pain in the butt when I installed mine
What is the most minimally invasive way requiring no drilling of holes. I also need it secured so it doesn’t rattle or make any loud noises in cab as this vehicle is meant to go off-road.
Exactly as you see in this video. There were no holes drilled.
my 4runner came with an easy to connect pug tail.
Was it necessary to disconnect the battery?
No, but when installing electronics it doesn’t hurt
I followed your instructional video. But, after installing it and started the 4Runner I didnt see the Led blue or green lit as I press the control knob. Whereas when your friend first started his 4Runner after the install I saw you pressed the knob and it lighted blue. Do you have any idea why mine didnt? TIA🤓
They don’t really power up until you connect a trailer, maybe double check it when you connect your trailer? With the plug and play harness it shouldn’t have any issues.
@@ProjectBasecamp Oh ok, The reason I was concern was I saw you pressed the control knob and the blue led lit. So I tried the same sonI thought I connected it incorrect. Thanks much for the quick response and more power to your channel!💪
Thanks my friend, good luck!
I wire it to the factory harness according to there website but the right signal and brake lights doesn’t work.after contacting customer service ,they admit the wiring is good but they ask me to buy the plug and play cable .guess what still not working.don’t but this product for Toyota 4 runner