ich bin etwas geflasht, wie leuchtend die Sonne aussieht, obwohl ihr keine Weißhinterlegung gemacht hat. Liegt das an der B-Foil? Und geht das auch mit den Neon Farben ohne Weiß dahinter?
Wenn die Farbe kräftig genug ist, geht es auch ohne Weißen Hinterdruck und der Kleber vom B-Papier unterstützt da nochmal etwas da dieser Weiß ist. Natürlich kannst du auch in Neon Drucken ohne Weiß dahinter, es kommt halt immer auf das Motiv und Farbauswahl an, ob du einen 2.Druckdurchgang mit Weiß benötigst. :)
greatly executed video. do you have any distributors in North America ? was looking at your bundles but sadly based on the shipping cost i assume its still being shipped from your local region.
Sorry late watching it! But great video. I noticed you did not do a layer of white behind the colours. I assumed this was always necessary. And I did a similar design and the glue from the B paper did not stick properly to the lighter beige or yellow colours. Yours seems to work well. Maybe you yellow was darker?
Hi Charles, thank you very much! The motif does not require a white backprint because no black and white color is used at the same time. If the color tones are too light, this can happen. Please try again with a stronger yellow. Also make sure to stay within the CMYK color range.
At 4:03 in the video above the WHITE comes out WHITE. On mine it’s not. I download the image from CANVA though only have 2 options RGM and CMYK for printing. On the Ghost website it recommends 100% BLACK where the WHITE is to go. Thank you 🙏 in advance
Hello, I was recommended by Nico from your sales department this past summer for me to purchase the printer from Amazon (which I did) the only thing is that the printer model that he recommended is the LBP-622cdw which I purchased from Amazon. Nico provided the link to the actual printer from Amazon, my issue is that the printer settings are very different from the ones shown in your video. I do not have the option of choosing the "mirror" option. Should I just flip or mirror the image using Photoshop before I save it as Photoshop PDF? also I noticed you have a black surface on the bottom of the tray (drawer 1) where the paper-foil goes. Is this a custom feature on your printer or is it something I can get for my printer.
Hi, try another driver, if you need help with this please write our support at: support@ghost-white-toner.com And the black in the paper tray is just a sheet of black paper :D
@@Ghost-White-Toner When you say try another driver, you mean from the Cannon drivers that are available from their website or from you guys? and thanks for the info about the black paper 😊
Hi Dave, what settings do I need for my Canon lbp631cw printer to recognise my Ghost white toner cartridge as It gives me a error everytime I put my Ghost Cartridge In Is there a way to disable this ? A Video would be helpful Regards Geoffrey Urch
Hey Geoffrey, this is to smooth out any air bubbles and ensure a better pressure distribution. It has proven to give better and more consistent result. That is why!
How do you get 100% Black when printing this design with colour. If I print BLACK/WHITE on my Canon ImageCLASS LBP622Cdw it works great. THOUGH when I have colour with my design like above the CMYK comes through on the white. I am using CANVA and can't seem to find where to do this. Thank you in advance.
Sorry bro. I Have a question. I made all you told to do. Matt side up, paper a And b. And than IT dident last on the garmet. 160 celsius And 120 seconds A/B. And 30 seconds to garmet but Its dident last on the tshirt. I realy dont know why. Sny idea? What i made Wrong?
Hey, try to create a design that is not full-surface and transfer it to your t-shirt. If you still encounter any problems, please contact our support. support@ghost-white-toner.com
not necessarily. But try that it's not a complete layer only the design leave gaps in your design like on the t-shirt in the video. i hope this helps you if not feel free to contact our support at: support@ghost-white-toner.com
Prints look good at the time of printing but after washing it is far from perfect and this is after following the exact protocol for this type of printing. I assure you that the the prints only look good up until the washing machine gets involved. My conscience wouldn't allow me to sell these to my clients. Durability on a scale 1- 10 is 1, 2 at best. so disappointing. We need to see David commit to a wash test video instead of just a censored production video.
@@truewordz777 I use Ghost White toner all the time and the wash test works great. I have washed my garments many many times and but of course, eventually it starts to crack just like my screen printed t shirts do.
Are you printing in RGB or CMYK when creating the PDF? Is it possible to make composite Black with CMY with this printer? Just wondering if are you able to get good colour without making a 2nd pass of white behind.
The following values are stored in the print menu: RGB source profile: Printer standard CMYK simulation profile: Printer standard -- It depends on the motif some motifs do not need a white backprint but some should have one.
@@Ghost-White-Toner I see, thanks. Are the toners the cannon ones or the ones you provide? I also tried to print with the Plain 2 but the print comes out with some clouding around the edges. If I use heavy paper settings that doesn't happen, but the colour do look more translucid than in plain 2. Any advice?
@@Ghost-White-Toner Do you sell colour toners as well? or did you use the Neon on these ones? I have same printer and your white Ghost ones and White works well very well alone, really well. But if I use colour without using white the colours just don't look strong enough, The problem is when I add for the 2nd layer of white its very offset even if I keep the paper very well centered, something that doesn't happen that much with the HP you have on other videos.
Now i think i know. Whan i use only 130 celsius And 80 seconds fór A/B And only 20 seconds And 130 celsius fór the garmet, IT works +-. I need to try more times to bez perfect. But 160 Is tu much And 120 seconds Is to much fór me
![โฮ่ง! (SUGOI) - LYKN [ OFFICIAL MV ]](http://i.ytimg.com/vi/nFp4zjAARFs/mqdefault.jpg)
Cool studio!
Thank you! :)
Like new studio, very nice.
Thank you!
Thanks so much for this very detailed video, have you done multiple wash test on the garment to see how it holds up?
Thank you! If you proceed as described and wash at 30 degrees inside out you will get around 40-45 washes.
ich bin etwas geflasht, wie leuchtend die Sonne aussieht, obwohl ihr keine Weißhinterlegung gemacht hat. Liegt das an der B-Foil? Und geht das auch mit den Neon Farben ohne Weiß dahinter?
Wenn die Farbe kräftig genug ist, geht es auch ohne Weißen Hinterdruck und der Kleber vom B-Papier unterstützt da nochmal etwas da dieser Weiß ist.
Natürlich kannst du auch in Neon Drucken ohne Weiß dahinter, es kommt halt immer auf das Motiv und Farbauswahl an, ob du einen 2.Druckdurchgang mit Weiß benötigst. :)
greatly executed video. do you have any distributors in North America ? was looking at your bundles but sadly based on the shipping cost i assume its still being shipped from your local region.
Hi, currently there is no dealer there, we recommend you to buy a printer locally and order the toner from us as our printers are EU models.
@@Ghost-White-Toner thanks for responding.
Sorry late watching it! But great video. I noticed you did not do a layer of white behind the colours. I assumed this was always necessary. And I did a similar design and the glue from the B paper did not stick properly to the lighter beige or yellow colours. Yours seems to work well. Maybe you yellow was darker?
Hi Charles,
thank you very much!
The motif does not require a white backprint because no black and white color is used at the same time.
If the color tones are too light, this can happen. Please try again with a stronger yellow.
Also make sure to stay within the CMYK color range.
@@Ghost-White-Toner Awesome thank you for the advice! I’ll let you know how I make out
Which material do you recommend for hoodies does it have to be 100%cotton
You'll get the best results with cotton but mixed fabrics like 80% cotton and 20% polyester or 70% to 30% will also work.
Just came across this video and it's very informative. Can you subject a less expensive printer that will do that job?
www.ghost-white-toner.com/mini-ghost/
Thank you very much!
Our Mini Ghost can do that too (HP M150a/NW)
One question, do the print crack or fade after a few washing?
hi, the print lasts about 40-55 washes at 30 degrees and inside out
At 4:03 in the video above the WHITE comes out WHITE. On mine it’s not. I download the image from CANVA though only have 2 options RGM and CMYK for printing. On the Ghost website it recommends 100% BLACK where the WHITE is to go. Thank you 🙏 in advance
Hi Sheila, we replied to your message on Facebook.
Hello, I was recommended by Nico from your sales department this past summer for me to purchase the printer from Amazon (which I did) the only thing is that the printer model that he recommended is the LBP-622cdw which I purchased from Amazon. Nico provided the link to the actual printer from Amazon, my issue is that the printer settings are very different from the ones shown in your video. I do not have the option of choosing the "mirror" option. Should I just flip or mirror the image using Photoshop before I save it as Photoshop PDF? also I noticed you have a black surface on the bottom of the tray (drawer 1) where the paper-foil goes. Is this a custom feature on your printer or is it something I can get for my printer.
Hi,
try another driver, if you need help with this please write our support at: support@ghost-white-toner.com
And the black in the paper tray is just a sheet of black paper :D
@@Ghost-White-Toner When you say try another driver, you mean from the Cannon drivers that are available from their website or from you guys? and thanks for the info about the black paper 😊
Yes exactly the one from the Canon Website :)
Hi Dave, what settings do I need for my Canon lbp631cw printer to recognise my Ghost white toner cartridge as It gives me a error everytime I put my Ghost Cartridge In Is there a way to disable this ?
A Video would be helpful
Regards
Geoffrey Urch
Hi, please send us a photo of your error message stating your order or invoice number so that we can take a look at it.
support@ghost-white-toner.com
Hi, nice video why do you use the 5 sheets of paper on top ?
Hey Geoffrey,
this is to smooth out any air bubbles and ensure a better pressure distribution. It has proven to give better and more consistent result. That is why!
How do you get 100% Black when printing this design with colour. If I print BLACK/WHITE on my Canon ImageCLASS LBP622Cdw it works great. THOUGH when I have colour with my design like above the CMYK comes through on the white. I am using CANVA and can't seem to find where to do this. Thank you in advance.
Hi Sheila, we replied to your message on Facebook.
bro i have a same looking printer but it's lbp612c/613c! does it work like this one can i do all this on it ?
Hi, unfortunately we only have toner for your successor model to the one you see in our video.
Sorry bro. I Have a question. I made all you told to do. Matt side up, paper a And b. And than IT dident last on the garmet. 160 celsius And 120 seconds A/B. And 30 seconds to garmet but Its dident last on the tshirt. I realy dont know why. Sny idea? What i made Wrong?
The collor Is only on the A sheet And not on the garmet
@white-ghost-toner what is the largest size print that can be used for this printer?
Hi! This printer can print up to size A4.
How do I get my design not feel like paper after I press and use the silicone matte finish paper?
Hey,
try to create a design that is not full-surface and transfer it to your t-shirt.
If you still encounter any problems, please contact our support.
support@ghost-white-toner.com
@@Ghost-White-Toner so do a smaller size picture?
not necessarily. But try that it's not a complete layer only the design leave gaps in your design like on the t-shirt in the video.
i hope this helps you if not feel free to contact our support at:
support@ghost-white-toner.com
Prints look good at the time of printing but after washing it is far from perfect and this is after following the exact protocol for this type of printing. I assure you that the the prints only look good up until the washing machine gets involved.
My conscience wouldn't allow me to sell these to my clients. Durability on a scale 1- 10 is 1, 2 at best.
so disappointing.
We need to see David commit to a wash test video instead of just a censored production video.
@@truewordz777 I use Ghost White toner all the time and the wash test works great. I have washed my garments many many times and but of course, eventually it starts to crack just like my screen printed t shirts do.
Are you printing in RGB or CMYK when creating the PDF?
Is it possible to make composite Black with CMY with this printer?
Just wondering if are you able to get good colour without making a 2nd pass of white behind.
The following values are stored in the print menu:
RGB source profile: Printer standard
CMYK simulation profile: Printer standard
--
It depends on the motif some motifs do not need a white backprint but some should have one.
@@Ghost-White-Toner I see, thanks. Are the toners the cannon ones or the ones you provide?
I also tried to print with the Plain 2 but the print comes out with some clouding around the edges.
If I use heavy paper settings that doesn't happen, but the colour do look more translucid than in plain 2. Any advice?
@@MoogaWooga In the video our toners are used.
Try increasing the toner intensity from -8 to +8. For the best printing results, we recommend +8.
@@MoogaWooga If you have more problems with it, feel free to write to our support at: support@ghost-white-toner.com
@@Ghost-White-Toner Do you sell colour toners as well? or did you use the Neon on these ones?
I have same printer and your white Ghost ones and White works well very well alone, really well. But if I use colour without using white the colours just don't look strong enough, The problem is when I add for the 2nd layer of white its very offset even if I keep the paper very well centered, something that doesn't happen that much with the HP you have on other videos.
IT was coocked And that was the problém
Now i think i know. Whan i use only 130 celsius And 80 seconds fór A/B And only 20 seconds And 130 celsius fór the garmet, IT works +-. I need to try more times to bez perfect. But 160 Is tu much And 120 seconds Is to much fór me