ARB awning comment. Have been using a 2.5 x 2.5 in Aust for 3 years. generally ok but problem is if you use the ARB drop down delux awning room you will find that the awning room ( 8kg )tends to bend the horizontal swing out arms. We told ARB head office and manufacturing plant in Melbourne Australia ( where we live) about the issue and asked to speak to a technical ARB person. Unfortunately the sales staff at the Glossy Melb showroom say NO NO No way the poles bend ( despite have two bent poles of ours in their hands. Reluctantly they replaced them and when it a hAppened again we approached ARB in another state whilst on the road travelling with some very convivial feedback and got the same result excuses excuses excuses except this time they said 'stiff luck buddy' and no replacement so we bought more poles from them. So we just STOPPED sing the Drop down delux awning room and put it into storage at the back of our garage and continues to use the awning . NO PROBLEMS SINCE WITH THE POLES.. it is clearly apparent that the weight of the drop down awning is just a bit too much for the awning . We are about to travel again in late 2020 and may try to use the awning tent again and have now purchased two vertical poles to place under he awning arms about a metre out from the vehicle to support the swing out arms . Over the last three years we have purchased thousands of dollars of gear from ARB. inc fridges, underbody protection plates , awnings, drop down awning tent rooms, spot lights, radios, snorkels, recovery gear etc etc. generAl quality of ARB gear ok price point is expensive but generally ok BUT CUSTOMER SERVICE AND WILLINGNESS TO TAKE A BIT OF CONVIVIAL FEEDBACK FORM AN ESTABLISHED CLIENT ABSOLUTELY LOUSY.
My 'pro' tips having driven 1000s of miles on dusty corrugated roads with the same awning (and a diesel jku)- 1. tuck 2pegs up under one of the velcro belts when you role it away, that way you'll always have them and never forget to pack pegs. 2. Add friction buckles to the velcro belts. 3. Wd-40 that zipper, dust will kill it, takes 2min. 4. Drill some extra holes in the spreader bar that is suspended between the two telescoping poles. Then add cable ties to the holes. They give you extra places to hang things and points to tie off tarps etc.
I just bought an ARB awning today and your honesty is refreshing about the awnings. I'm already in my box of nylon straps, sewing needles, d-rings, etc ready to do what you did. Appreciate the great suggestion!
Good stuff. I am about to install mine, think I’ll rivet a snap onto the Velcro(while it’s still new)at the point where it holds. I’ve found that snaps with Velcro works very well, sometimes it’s over kill.
Excellent review amd humble opinion i has the same problem but the i cut a litle that and combine with a karabiner and vuola, love you jeep and the way you have cheers from Merida, Venezuela !!!
Very informative & helpful video. We will invest soon because we really need an awning! Will check out your other video on how you handle rain with this awning. Thanks for sharing your experience.
Finally got my Gobi on the Jeep and attached my OzTrail awning. It has a very similar build. Similar in that it uses the same lame velcro system. Mine isn't as bad as yours but I haven't used it as much as you have either. Thanks Mark!
Can you please do an updated review with all your MODs? Do you think ARB has taken your suggestion on the D ring idea for securing the awning to the side poles? Thanks Skillet
Great review. Something Ive noticed is that some people roll the awning up top over and some under over.... does this matter on the longevity and wear? Maybe over thinking this .....
Thank you Hard to disputes the pros and a few curious attachments derails and that reference to over tightened screws verses another type of superior removable hardware
I like the arb except they seem to have put out an awning that doesn’t have a ready way to attach to Yakima cross bars. Seems nuts. Does anybody have any idea how to attach the arb to round bars like Yakima makes?
Thinking about the ARB. This was very helpful. Looks like you did you 8X8. I am trying to decide which size. Came across a barely used 6.6X8 with the zip in room. Trying to decide if that will be big enough for 2 of us. Appreciate the review. Going to find other video with the accessories you use.
Very useful video! I'm looking at one (or a similar one from Ironman 4x4) and the strap mods / strengthening for wind are on the list of todos. Thanks!
I have not seen the actual product. But from what I see from the video, where he is complaining that the Velcro is not suitable for the job I think he is wrong. The problem is that what they used is not Velcro, but a cheap copy of Velcro. If the straps were Velcro he would not have a problem!
Quit complaining about the velcro straps..I have had mine longer than you..Be happy they have lasted 5 yrs..Maybe wash it once in awhile..Nevef had any problems with mine..Ever..So quit complaining or start your own manufacturing company...ARB the best in my opinion.
Dude, and I’m being kind using that term to describe you, wanna keep this post “G” rated, ...you had a “Sewing Company “ attach that little bit of fabric onto your awning,...unbelievable,...I understand you are a Canadian, but over here in the U.S. we man up and do those things ourselves,...unbelievable!
ARB awning comment. Have been using a 2.5 x 2.5 in Aust for 3 years. generally ok but problem is if you use the ARB drop down delux awning room you will find that the awning room ( 8kg )tends to bend the horizontal swing out arms. We told ARB head office and manufacturing plant in Melbourne Australia ( where we live) about the issue and asked to speak to a technical ARB person. Unfortunately the sales staff at the Glossy Melb showroom say NO NO No way the poles bend ( despite have two bent poles of ours in their hands. Reluctantly they replaced them and when it a hAppened again we approached ARB in another state whilst on the road travelling with some very convivial feedback and got the same result excuses excuses excuses except this time they said 'stiff luck buddy' and no replacement so we bought more poles from them.
So we just STOPPED sing the Drop down delux awning room and put it into storage at the back of our garage and continues to use the awning .
NO PROBLEMS SINCE WITH THE POLES.. it is clearly apparent that the weight of the drop down awning is just a bit too much for the awning . We are about to travel again in late 2020 and may try to use the awning tent again and have now purchased two vertical poles to place under he awning arms about a metre out from the vehicle to support the swing out arms .
Over the last three years we have purchased thousands of dollars of gear from ARB. inc fridges, underbody protection plates , awnings, drop down awning tent rooms, spot lights, radios, snorkels, recovery gear etc etc.
generAl quality of ARB gear ok
price point is expensive but generally ok
BUT CUSTOMER SERVICE AND WILLINGNESS TO TAKE A BIT OF CONVIVIAL FEEDBACK FORM AN ESTABLISHED CLIENT ABSOLUTELY LOUSY.
My 'pro' tips having driven 1000s of miles on dusty corrugated roads with the same awning (and a diesel jku)-
1. tuck 2pegs up under one of the velcro belts when you role it away, that way you'll always have them and never forget to pack pegs.
2. Add friction buckles to the velcro belts.
3. Wd-40 that zipper, dust will kill it, takes 2min.
4. Drill some extra holes in the spreader bar that is suspended between the two telescoping poles. Then add cable ties to the holes. They give you extra places to hang things and points to tie off tarps etc.
I just bought an ARB awning today and your honesty is refreshing about the awnings. I'm already in my box of nylon straps, sewing needles, d-rings, etc ready to do what you did. Appreciate the great suggestion!
Just installed mine and for the deluxe room to go with it. Can't wait to try it out
That's great, the deluxe room is a great choice. They are awesome. Thanks for watching.
Great video, thanks. I just got my roof rack, now for the awnings
Thanks and Peace be the journey.
Good stuff. I am about to install mine, think I’ll rivet a snap onto the Velcro(while it’s still new)at the point where it holds. I’ve found that snaps with Velcro works very well, sometimes it’s over kill.
Excellent Idea
Excellent review amd humble opinion i has the same problem but the i cut a litle that and combine with a karabiner and vuola, love you jeep and the way you have cheers from Merida, Venezuela !!!
I really appreciate this honest review
Great review. I wonder if straps from bicycle toe clips would be long enough to secure the awning? Velcro is useless with long term use.
Very informative & helpful video. We will invest soon because we really need an awning! Will check out your other video on how you handle rain with this awning. Thanks for sharing your experience.
Finally got my Gobi on the Jeep and attached my OzTrail awning. It has a very similar build. Similar in that it uses the same lame velcro system. Mine isn't as bad as yours but I haven't used it as much as you have either. Thanks Mark!
Can you please do an updated review with all your MODs? Do you think ARB has taken your suggestion on the D ring idea for securing the awning to the side poles? Thanks Skillet
nice bro .... honest review thanks i just bought let see how is work can you show how you install i gonna install on same car as you JK 4 door
Good idea on the double D-Rings you had done. been thinking about getting 1 of these. Thanks for sharing Good video .
Great review. Something Ive noticed is that some people roll the awning up top over and some under over.... does this matter on the longevity and wear? Maybe over thinking this .....
how is it after 9 years?
Thank you
Hard to disputes the pros and a few curious attachments derails and that reference to over tightened screws verses another type of superior removable hardware
I like the arb except they seem to have put out an awning that doesn’t have a ready way to attach to Yakima cross bars. Seems nuts. Does anybody have any idea how to attach the arb to round bars like Yakima makes?
I got a roof rack with round bars, let me know what you find
Great review and D-ring customization, I have the same duo of 100w panels.
Thinking about the ARB. This was very helpful. Looks like you did you 8X8. I am trying to decide which size. Came across a barely used 6.6X8 with the zip in room. Trying to decide if that will be big enough for 2 of us. Appreciate the review. Going to find other video with the accessories you use.
What size and model number is this one. I heard there’s a small and large one
Merci Mark, très intéressant.
Very useful video! I'm looking at one (or a similar one from Ironman 4x4) and the strap mods / strengthening for wind are on the list of todos. Thanks!
Thanks for the feedback, the velcro just doesn't stand up at all...Mark
@@markbouliane6289 buy some ski straps and use those
Great review
Good vid, whats the panel information
thanks
I have not seen the actual product. But from what I see from the video, where he is complaining that the Velcro is not suitable for the job I think he is wrong. The problem is that what they used is not Velcro, but a cheap copy of Velcro. If the straps were Velcro he would not have a problem!
It's 5 years old it's only $280 buy a new one I'm watching things aren't made to last forever anymore unfortunately
👍👌❤️🇨🇦
seems a bit fumbly to setup for $200.
No it’s not, it’s just him.
2.5 METER AWNING? HOW LONG IS THAT IN AMERICAN TALK?YARDS, FEET, INCHES????
Jeez dude. You cant google 2500cm and get it converted?
Its 8ft
@@somemedic ACTUALY THE AWNING IS 8 FEET AND 2 INCHES. BUT JEEEZ DUDE, WHAT WOULD YOU DO WITHOUT GOOGLE. HUH DUDE?? JEEZ
What would I do without google?
Roll over and ask your mom
@@fairrider3346 WHY ARE YOU YELLING AT EVERYONE!?!? Turn your cap lock off and stop being so lazy. Look things up and learn how to convict.
@@somemedic LOL
Quit complaining about the velcro straps..I have had mine longer than you..Be happy they have lasted 5 yrs..Maybe wash it once in awhile..Nevef had any problems with mine..Ever..So quit complaining or start your own manufacturing company...ARB the best in my opinion.
Dude, and I’m being kind using that term to describe you, wanna keep this post “G” rated, ...you had a “Sewing Company “ attach that little bit of fabric onto your awning,...unbelievable,...I understand you are a Canadian, but over here in the U.S. we man up and do those things ourselves,...unbelievable!