I was taught my whole life NEVER sand in one direction,but you did it and it turned out very nice.I was also taught to use the da first to knock down the mud then switch to block then at the end use the guide coat with the block only. You managed to do all that in a different order and it still came out straight. Nicely done sir!
Hi,great videos,best on yt because of details of procedures. Can you please tell me what putty spreaders you use so I can perches the same ones. I’m a level 3 technician and I’m trying to find spreaders with the right size and flexibility. Thanks.
Good afternoon Edwin. That is laser straight body work. really looks good. That will paint up to be an excellent repair. Thanks for another great video you take care Edwin.
isso e controle de lixamento amigo. vc pode comprar ele no mercado livre , que e em po e vem em um recipiente com espuma para passar na peca. ou comprar ele liquido ou o melhor e mais pratico , pega uma garrafa pet coloca meio litro de tinta preta e um litro de thinner pu , coloca uma luva na mao e passa com um pedaço de espuma... assim e melhor pq se vc aplicou com a peca limpa , depois de lixar e so limpar a peca e pode aplicar uma massinha onde ficou preto ... pq e tinta e de qualidade e bem rala ,. já ele em po não aconcelho aplicar nada por cima...
I just watched one of your videos and I decided to subscribe to your channel straight away.. May I just ask you what is the liquid you use to clean the dust after sanding the primer and what are sanding grit for body filler and primer? Thanks a lot in advance for your reply
This is what Alot of rookie bodyman need to see, Rookies apply body filler,then they add a puddy glaze,Which if the bodywork is right.3 coats of 2 k primer is all it needs.Some people over use glazing puddyy,which is a waste of material .Puddyy coat is only for small dents, scratches,and pinholes.
I was taught my whole life NEVER sand in one direction,but you did it and it turned out very nice.I was also taught to use the da first to knock down the mud then switch to block then at the end use the guide coat with the block only. You managed to do all that in a different order and it still came out straight. Nicely done sir!
Thanksss friend,jes it came out straiht,its just the feeling 👍👍👍✌
I watched your videos where are you getting those spreaders nice worky ftiend
Hi,great videos,best on yt because of details of procedures. Can you please tell me what putty spreaders you use so I can perches the same ones. I’m a level 3 technician and I’m trying to find spreaders with the right size and flexibility. Thanks.
Sir great work I like this work I have this work in Pakistan
muy buen acabado...quedo perfecto 👍👌felicidades.
Good afternoon Edwin. That is laser straight body work. really looks good. That will paint up to be an excellent repair. Thanks for another great video you take care Edwin.
Really serious work, bravo!
Thanksss
Great friend😊
Very good job bro.
Thanks👍
Very good Work! Greetings from Austria 🙂
Which primer did you use from the spray can before apply Filler? Is this an Epoxy Primer?
isso sim é uma serviço bem feito 👍👍👏🏼👏🏼 tem vaga pra um brasileiro aí ?😊
You only needed to apply primer in the damaged area .no need to apply in the complete door panel.. but you are good at what u do ..
There was more damage on the door,scratches
If you do it cheap than you are right.
If you do it correctly you do it like this
If you do it with passion for your car you change the door
I have a question:
What type of spray is silver color that you put on clear metal surface??
Some type of anticorosion spray ?
You are the master of body work friend... Super job again... How are Ed?
Thanks Vasilis, i m fine 👍you?
@@DutchCarPainter Ι am fine my friend.. Thank you!
Que produto esse q vc usa pra ver os defeio q possa dicar
isso e controle de lixamento amigo. vc pode comprar ele no mercado livre , que e em po e vem em um recipiente com espuma para passar na peca. ou comprar ele liquido ou o melhor e mais pratico , pega uma garrafa pet coloca meio litro de tinta preta e um litro de thinner pu , coloca uma luva na mao e passa com um pedaço de espuma... assim e melhor pq se vc aplicou com a peca limpa , depois de lixar e so limpar a peca e pode aplicar uma massinha onde ficou preto ... pq e tinta e de qualidade e bem rala ,. já ele em po não aconcelho aplicar nada por cima...
Классно! Условия труда хорошие.
Great job my friend amazing thanks 👍👍👍👍
Thankss,👍👍
You’re very good doing body work. What brand is the sander what you are using?
Thank u, i'm use the mirka deros 5.0
I just watched one of your videos and I decided to subscribe to your channel straight away.. May I just ask you what is the liquid you use to clean the dust after sanding the primer and what are sanding grit for body filler and primer? Thanks a lot in advance for your reply
Excellent repair job!
Mario Mocofan and the other is
This is what Alot of rookie bodyman need to see, Rookies apply body filler,then they add a puddy glaze,Which if the bodywork is right.3 coats of 2 k primer is all it needs.Some people over use glazing puddyy,which is a waste of material .Puddyy coat is only for small dents, scratches,and pinholes.
You are totally right my friend
Cuando usar la orbital y cuando la garlopa es lo mismo
What’s the brand /model of sander you’re using in this video?
3m and mirka for the machine✌
eso si mostró los pasos que se utilizan para la reparación sin tapujos vien vien
why don't you ever use a air file?
friend, before the primer ... application with splay on the bare plate ... is zinc based ink?
What brand of putty are you using?
Ferro
Wich Brand is the putty I would like to buy it
Hi.how much primer did you use on that panel?
350ml
Robert kaliszuk ze holendrom chce się robić
با سمباده کف تخت که نباید سمباده بزنی جایی که شکم داره یا گرده یا موربه
very good jobs
Why does it have to be straight again? What's wrong with a different door' shape ?
Nicw work anyway :)
What kind of pasta is this?
Looking good, as always :)
goed gedaan, good job
Todo muy bien excelente pero te agradecería mucho numero fe lija que ni se vio
Number one
Vô địch thiên hạ
Job done 👌
Superrrr broooooothhheeeeerrrrrrrrrrrrr!!!!!!👋👋👌
Thanks Bro!!!
Buen trabajo
Want to part 2 the painting
master piece!!!
Konstantin thanks friend
Ich finde schlechte Übergang beim Soachteln, dein Schleidart ist auch nicht korrekt, aber sonst war alles ok
Super Super Super, great job 👏👏👏👏👏👏👏👏👍👍👍🔝🔟🥇
Iam also painting
Hi bro i like ur video but ur work dent pulling feather edgeing add pls next video
super Edwin super!!!!!!!
kwstas super thanksss friend
no narration ...
Nice amigo
😍😍😍
Thank u Bambi!!!
Wander if this video is about watching you work, if so bring the snacks.
Hallo guten morgen gut
جميل جدا
👍😁
😎👏👏👏👏
جاسم جاسم ✌✌👍👍
👌 but where is your mask 😷
Your are right,the box was emty.normally i wear always a mask,but there is almost no dust when i use the sucker hose.👍
Dutch Car Painter I know that helps a lot using the vacuum sander but still use the mask ! your health is first take care !!
👌✌👍🔝
Amigo primero pasa le la lijadora órbita 3 con 120 y luego le taqueas con p 220
عاشت ايدك
👍 !!!
Only thing i hate watching these videos they dont speak up what exactly they are doing..or they dont tell alternatives tools..
You paint lots of cars. You must make lots of money!!
No he works for a company that makes the real money but he still know what he is doing good work
1* 👌👍👏
Hshahhh
Nhìn ko chuyên nghiệp