How to paint old appliances
ฝัง
- เผยแพร่เมื่อ 9 ก.ย. 2016
- Please subscribe!! :)
This video is intended to teach you how to restore your older looking appliances and make them look brand new. plz watch my other videos:) comment and subscribe if you like the video:) - แนวปฏิบัติและการใช้ชีวิต
![คุณอาเรียโต๊ะข้างๆ พูดรัสเซียหวานใส่ซะหัวใจจะวาย ตอนที่ 4 [ซับไทย] 【Ani-One Thailand】](http://i.ytimg.com/vi/_vK_cden2f8/mqdefault.jpg)
I would prefer to watch and learn how to paint the stove from you than the others I have seen.
Thanks for this video!
My take on this project:
I would have just taken the hood off and painted it outside.
A lot of people use masking tape for trim, protecting cabinets, etc., but not a lot of people know about removable liquid masking, which would be perfect for the buttons.
And lastly, why does everyone go with white paint?
You have a lot of good points:) for me it's a rental and white appliance epoxy is what my company carries:)
I did not know about the removable liquid masking I'm definitely going to look into that thank you:)
Duh, because white is the best
Right I've been looking all over for colored appliance paint, it's just me so I want color everywhere
@@pennyjohoc look into automotive paint for all kinds of colors for appliances. My vintage refrigerator is sea foam green. A bit more expensive than other paints. Website Paint scratch.com
Right, white is boring I've done pink and turquoise
Oh yes I definitely covered that in the beginning of the video:) and you are rite prep is everything. Thank you for your time and feedback:)
Thank you for your video... I bought my paint today to cover 1972 year old "Harvest Yellow"...
Looks EXACTLY like the hood in older house I recently bought. Was going to replace, but at meast for now, I migjt give this a try. THANK YOU! (Also I read from a comme ter that Stainless Steel appliance paint is different and has to be sprayed SUPER light or it will run (like 8 coats) but that if done that way will turn out well.)
Your welcome:) and yes I would definitely do small light coats rather than thick coats. Because it will definitely run. And remember prep is everything:)
Thank you! I will try this.
Awesome thanks 😊 🙏
I'm so impressed by how you put down just a few strips of painter's tape around the edges with it still attached, no drop cloth or plastic or nothing covering the surrounding stuff, and managed to not get paint on anything but the project itself. Not my clumsy self 🤣🤣I would have gotten paint all over EVERYTHING ELSE too 🤣
Overall, very helpful video, 10/10 painting accuracy! I'll be doing mine like this, but with as many drop cloths/plastic coverings on the surrounding items as I can. Thanks for making this.
I would have covered everything up so I couldn't get paint on anything, other than the project.
Thank you so much I would definitely prep a lot more if it were a bigger project this oven hood just needed a light topcoat. Thank you so much:)
Good idea with the blade and tape lining! I will do that
Thank you:)
Awesome! ty
Good explanation, came out nice, i have to do same thing with my green stove .
Good luck, thank you:)
Great!
Thanks:)
Help me out alot
Thx u!!
I would like to change mine range to black at least on the doors. It’s a glass top. Will any black epoxy spraypaint work? What would you recommend?
You go girl with yo' epic self! Look at you all masc getting stuff done around the house.
Ok so im gonna paint the same appliance but i am in a pickle to this paint or the high heat paint.
How does the appliance paint hold up against the hot steam/air?
Did you get paint on the cabinets?
I have a plan to paint white to black. Do I need base coat and clear coat?
Please tell your viewers to CLEAN the hood very good
and also sanding it helps too...
I didn't do this and it peeled months later.
Prep is everything... and watch for overspray... it goes everywhere.
Do you recommend.anything in particular for cleaning the hood? Thanks.
Nice
Thank you very much;) if you liked the content check out my channel there's plenty more:) have a good day
Great imma do this in five minutes lol
Hi there, did you by any chance have a project on updating the cabinets you have in the video?
I do not sorry that video was only to re paint the oven hood. We kept the cabinets in that house the original wood look:)
Can you do one where You are painting a stove? Also my water heater closet is right next to my stove, it is caked in grease and grime I plan on cleaning it and then repainting it is there a certain type of paint you recommend for that? Like there is there one that is more grease resistant?
Hello:) I don't have a stove that I'm painting rite now but I did find this link for u th-cam.com/video/I6JcpZmbwTQ/w-d-xo.html.
Also you are gonna want either a high gloss or an oil based paint next to the stove that will make it a lot easier to clean.
Thank you for watching:) if you like the video plz give a thumbs up subscribe and plz share it:) thank you for your time:)
How do you clean the buttons and area where the tape was around them?
If they're in too bad a condition and it's not coming clean and they're faded I would just go ahead and paint right over them so don't even tape them
Nice job! what paint do you recommend to do the front of an old dishwasher?
You can use the same kind with the same procedure!:) For a different color check out Rust-Oleum online. Hope that helps.
what would work to get rid of a little light rust on the exterior of a white stove?
Have you tried mineral spirits, you can also try mixing Coca-Cola and laundry detergent powder make a nice little solution and gently scrub in circles.
Nice job! Do they have the Appliance Epoxy in black gloss?
Yes they do here is a link:)
www.googleadservices.com/pagead/aclk?sa=L&ai=DChcSEwi1mL-FnZflAhWTt-wKHbnrAGsYABAEGgJwag&ae=1&ohost=www.google.com&cid=CAESP-D2Mev4LpCm8pYHm7T12Y6d7-a_xS-ZwOIwLAfF1qS_YWde-KVNsNkDJIKr8Lansp8cxvyMenr83hJiZmv5nA&sig=AOD64_0mhpECeGDB2gKNvwe8kguqiIhEZQ&ctype=46&q=&ved=2ahUKEwj3pLaFnZflAhUNnZ4KHTypCbMQzzl6BAgKEBQ&adurl=www.lowes.com/pd/krylon-appliance-specialty-gloss-black-epoxy-spray-paint-actual-net-contents-12-oz/1000459661%3Fcm_mmc%3Dshp-_-c-_-prd-_-pnt-_-google-_-lia-_-219-_-spraypaint-_-1000459661-_-0%26store_code%3D2477%26gclsrc%3Daw.ds%26%26gclid%3DCj0KCQjw84XtBRDWARIsAAU1aM2SAUAf8qIvy168NwXkIBblmA5Bi7jT-I4XGV0c8wCQGc-7zjH9DwEaAkatEALw_wcB
Plz subscribe and share the video.
If you like what you see check out my TH-cam channel there's allot more DIY videos;) thank you
Yes they do..it's 4.98 at home Depot. I have black
Walmart has the gloss black High Heat for the range its self. Don't use the regular appliance epoxy for the actual range.
Can I paint white appliances black? Including stove and oven door?
Yes you can paint them any color you want just make sure you get the appliance epoxy.;)
Can you tell me what kind of spray you used plz
It's just a white Rust-Oleum appliance epoxy
I know you taped the buttons but do you have any tips to spruce up the buttons?
I only tried over the buttons so I didn't paint over the name... You can definitely spray rite over the buttons to make them look brand new as well just remember to give them nice and small coats:)
What did you paint your stove with ?
I actually didn't paint the stove. You would need a high heat paint for that, which you can but from Lowe's:)
What kind of paint did you use?
I used white appliance epoxy.
It's a Rust-Oleum brand.;)
Plz like and subscribe;) if you enjoy the content check out my channel there's plenty more:)
Thanks
Is the spray paint really strong?
Yes, as long as you prep it properly it will last for years:)
What sandpaper number did you use
Ummm I don't remember exactly what I used there I think it was 80 and then 120.
Ugh within five minutes I made a mess! I sprayed to much on the range cover and fridge. How do I fix it. Just dripping all over the place 😩 should I let it completely dry and spray gently? I started out like you but couldn't take the smell so I just sprayed as if I was spray painting to get away from the smell. Bad move.☹️🤷 Please advise.
Let it dry, then re sand it getting all dried drip spots. Spray at least 3 coats. The lighter you go the less of a chance you will have for drips:) good luck keep us updated:)
Ugh just found your diy and I have bubbles. I didn't sand first😒
How can I fix it?
All you want to do is wait for it to dry completely, sand any effected area then give it small light coats.
@@donmichaelscandleco.896 thank you for responding
Np, good luck:)
What about -- The Under-Side & The Buttons [ That was a 6 out of 10 Job, Which = 6/10, Which = 60%, Which is a "D" in my Book 👎 in this Video ] - Some will disagree with, That score but the Buttons/Under-Side are "Important" to One's visual 👀
As you said that you could paint the stovetop with this, did you do so? Like right around the burners? If so, let us know how that fairs...
No I didnt do that:) I was more or less talking about the front and sides of the stove. I would imagine the top would need more of a heat resistance paint. Thanks for your time:)
do not use paint thinner! its oily also an you'll have to wash with dish soap to remove it. use rubbing alcohol for 1st an lost step before applying the epoxy.
Thank you for the tip I will definitely try that out. Plz subscribe if you like the channel and thanks for your time:)
Looks like you have a 30" fan in a 36" opening. I think I would have looked for a proper size fan.
I was hired to restore it not replace it lol
Is it a kitchen chimney?
Kinda, the exhaust travels directly behind the oven good through some vents and then makes its way outside:) So more of a horizontal ventilation rather than vertical.
Oh well I have a question will this epoxy will on chimney????
Like a chimney for a fireplace?
Yeah 😊
Ok I don't think your supposed to paint the inside of those.
What type of sand paper are you using?
Just a small piece of 100 grit:)
Thanks
A new fume hood costs $40-60 at menards
How about my under the hood?
It's the same process, just clean it really well because that's where most of the grease gets stuck. Just tape off your fan underneath and you'll be good:)
Why didn't you remove the hood and spray instead of masking?
My thought exactly. It really isn't too hard, just turn off electric and cap off ends of supply of line.
Definitely rite I could have just did it the easy way Incase people didn't want to deal with the electric:)
I tried to remove mine. Got most of it down to find out the screw attached to the exhaust vent was stripped. An hour wasted. 😑
Dang that's no good. That's why I did this video without removing it. It's alot easier just masking stuff off then removing the oven hood and running into problems.. thanks for watching:)
I've got a couple projects that need your touch! :). Do you happen to live in Texas? :)
I Actually Live In Las Vegas So Sorry..:)
Sry lost my password for this channel just got it back. No luckily the cabinets didn't get paint on them lol.
A old camper stove n hood redo
👍
I got a new venthood at Lowe's for only $50.
Nice:) the can of epoxy is under $10 though
@@donmichaelscandleco.896
AMEN
I like DIY project's but the Buttons /Under-Side is very Important in that DIY "Visual Appearance" counts 👀
@@donmichaelscandleco.896 I bought it at Home Depot for $5. Buying a new vent is good if you know how to put it in. Otherwise, you will have to pay someone to install it.
I think it would have been worth the time and effort to remove it and paint it outside
Why are you not wearing a mask?
I would normally be wearing a mask for a larger project. This one was a simple topcoat.
Nothing more exciting than a slow speaker and watching someone tape off a tiny area. UGH
That's probably why he's the expert. / Peggy