Wondering why Einstein here disconnected his battery cable? Just have the ignition off while you swapped out the switch will do. Also, check its function BEFORE putting it back in? I did the same switch change 2 months ago easy-peasy no problems. I suspect the new switch is no good.
Standard procedure when working on anything electrical on an automobile or motorcycle. Any shop manual I've ever read says first order of business is to disconnect the battery whether you're replacing a sensor or a switch or anything else with power connected to it. Though I have forgotten a few times and the magic smoke didn't come out.
Did the problem actually end up being because of the power window switch? Funnily enough, I have a problem with the exact same window on my Accord 2010 and I can't figure out what the problem is 😂
So did I....had to replace the window switch in my 2012 Accord EX. I used a flathead screwdriver to CAREFULLY pry up the switch, then everything else just as here. But do not disconnect your battery cable, just make the switch with your ignition OFF. Easy...took me 14 minutes total and all works well. By the way, I got the switch part on Amazon for $40 but Honda (at the garage) wants $320 for it!! Do NOT buy it there! This repair is simple. Flat head screwdriver and small Phillips is all you need. And bring out a small bowl or something so you don't lose the tiny screws!
@@christianhomesteadingbibli4537 This is the link for the one I bought on Amazon for 2012 Accord EX. Perfect fit, only took 15 minutes to replace, and has worked fine in the months since. Dealer wanted $322 for the same part + $120 labor! Good luck. There's a video on TH-cam showing just how to do this repair...
When the switch is installed you have to bring the window half way. Then, bring the window holding the button and when the window hit the top continue holding the button for 3 sec to program the switch.
This was super helpful, I just successfully installed a new power switch by myself!! Thank you so much for this!
Thank you just what I was looking for , only video up for 08 + Accord
What is the link to the replacement you got from AliExpress
It would be nice to know what the problem ended up being... bad switch or something else entirely.
Thx for the video, you seem to just lift the console out with your fingers.....how did you do it so easily?
Is disconnecting the battery necessary?
Wondering why Einstein here disconnected his battery cable? Just have the ignition off while you swapped out the switch will do. Also, check its function BEFORE putting it back in? I did the same switch change 2 months ago easy-peasy no problems. I suspect the new switch is no good.
Standard procedure when working on anything electrical on an automobile or motorcycle. Any shop manual I've ever read says first order of business is to disconnect the battery whether you're replacing a sensor or a switch or anything else with power connected to it. Though I have forgotten a few times and the magic smoke didn't come out.
Just what I needed. Thanks bud
Did the problem actually end up being because of the power window switch? Funnily enough, I have a problem with the exact same window on my Accord 2010 and I can't figure out what the problem is 😂
So did I....had to replace the window switch in my 2012 Accord EX. I used a flathead screwdriver to CAREFULLY pry up the switch, then everything else just as here. But do not disconnect your battery cable, just make the switch with your ignition OFF. Easy...took me 14 minutes total and all works well. By the way, I got the switch part on Amazon for $40 but Honda (at the garage) wants $320 for it!! Do NOT buy it there! This repair is simple. Flat head screwdriver and small Phillips is all you need. And bring out a small bowl or something so you don't lose the tiny screws!
@@foxmyx62 you wouldn't have the link to the amazon product?
@@christianhomesteadingbibli4537 This is the link for the one I bought on Amazon for 2012 Accord EX. Perfect fit, only took 15 minutes to replace, and has worked fine in the months since. Dealer wanted $322 for the same part + $120 labor! Good luck. There's a video on TH-cam showing just how to do this repair...
@@foxmyx62 thanks for responding the link is not showing though. I don't know if yt removed it or what...
When the switch is installed you have to bring the window half way. Then, bring the window holding the button and when the window hit the top continue holding the button for 3 sec to program the switch.
I’m having this issues I installed it but none of the buttons work now and mine is a coupe
@@JordanABrea-pr6xk yeah, I have a 2011 LX-S (coupe) and I can’t get the old one out without removing the whole panel. Did you have to do that too?
You should reset the module
When you installed the switch you need to bring the window half way. Then bring the window up and hold the button for 3 seconds to program.
@@TheEspinal278for all of them or just 1?
You habe to reset the switch now lol
Here is the reset procedure.
th-cam.com/video/scWc_9ALo9Y/w-d-xo.html
😂😅
8세대시군요...저는 9.5세대 인데, 마침 마스터 스위치 조수석이 고장나서 영상찾다가 와봤습니다. 장갑과 주차장 팬을 보니 한국인듯하여...^^ 혹시 고장 해결 하셨나요? 아래에 리셋해주는 영상들 보니, 해결 하셨을 수도 ... 부품을 뭘 사야할지 고민이네요 전...ㅠㅠ