FULL Start to Finish Mezzanine Build
ฝัง
- เผยแพร่เมื่อ 6 ก.พ. 2025
- Today's video is a start to finish mezzanine build on our current building project. It is also the largest mezzanine we have built to date. You will also get a staircase build in this video towards the end.
Make sure to subscribe for more construction content
RR Post Frame Plans
rrplans.bigcar...
@DiabloTools Amped Rebar Demon
www.diablotool...
Stabila LAX600G
amzn.to/3YdmrWE
I had so many chores planned for this afternoon. RR builders have totally messed it up now there’s an hour of awesomeness just dropped. I have to drink beer too.
lol awesome
Curious why no isoTunes hearing protection lately ?
@@Ss-ds3yq at the 40 min mark kyle had something in. Kind of hard to tell if it was isotunes. Pretty sure I saw him using them during the giant building build. Probably just coincidence and/or convenience of filming and narrating. I know I hate talking with any kind of ear pro on.
I like to watch men do the job correctly without the need to argue against taking shortcuts and halfazzing everything. I appreciate your committment to excellence. And Greg too.
I love watching Greg work!
One of my favorite channels on youtube. Awesome job every time
The hangers was hilarious not just that you did it but you and gregs faces couldn't believe you did that I've done it more than once but i love that beam saw it's so much better than turning your post thanks for sharing
14:24 Love hearing Greg's product insight!
Your production quality has improved over the years! Great editing too. I learn something with every video.
Would love to see an in-depth video of all the ins and outs of a staircase build. Looks great.
Wicked tip on using the nailer gun nails for hand nailing, awesome one! Fantastic craftsmanship on your builds, I wish you guys worked in Georgia because if you did I would have already made the phone call.
Another fine job by RR. Keep the vids coming fellows, much enjoyed and appreciated.
amazing video. Thank you guys
Good way to start a Saturday! Learning
You men work quickly without losing efficiency and quality 👏🏿 👌🏿.
See this what good quality done right the first time job that's been to what most would say is over kill but I say done bloody right and safest way !! I don't know how many clients I've argued with because they didn't get that the little extra things like joist hangers improves safety, improves strength, and always make things look great when done right Instead of cheaping out, so gents thank you for showing it being done right, and I would hire these gents any time ! And thanks for taking the time for the editing cause some don't get just how much goes into making these videos lol, thanks for posting and great job all around
Looking forward to your next post-frame project!
QUALITY SELLS ITSELF,
ALL DAY LONG!!!
☮️💜🇺🇸
Always love your videos! Your camera guy does a fantastic job, freeing you guys up to just work!
Liked the Tim Allen reference! Manly saw for sure!
Honey-do list might call for a short cut 🙂, but absolutely not on a build like this! Impressive detail, nice work Kyle and Greg!
اتمنى لكَ التوفيق في عملك
لأنك تعمل بجدية وبدقة عالية
33:53 reminds me of old episodes of "This Old House" camera shots. nicely done camera work
Great builds everytime.
I don’t have a shop this big nor have a place to build a mezzanine, but I want to in the future and I will need this help at some point. Thanks guys, cheers
Got water, power, internet. Family doing good. Roof repaired here in Valdosta Ga. Feel bad for those in mountains. Florida is in for major trouble. Seeing any form of normalcy helps.
Great job, well done guyz! 😁👍🏼😁👍🏼😁👍🏼
Tim Allen! ARR! ARR!ARR!….Loved Tool Time…..
29:46 This is Greg's, "I REALLY HATE MY BOSS RIGHT NOW" laugh!!😂😂
Well done guys.
These are my Saturday matinee. Love it.
Are you a Fri Delos fan? They are doing an AL catamaran down unda with a bunch of crazy Ausies..
When working with my Granddad back in the '60s and '70s using recycled materials and such he often said " Hell for pretty , but strong." You guys do pretty work and strong. He would enjoy your efforts as I do.
KYLE Impeccable work as always..!! “Your Dah Man”👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼🙏🏼
The quality of your work and the attention to detail is awesome. Really makes these videos satisfying to watch. Like that top tread going in. Man that must be satisfying.
Good morning happy Saturday 👍🤟💪💪💪😎
I work for Boise Cascade. I love seeing you using our BCI I-Joist.
Truly remarkable
Great work!! im building a 24x35 steel building in the spring
Looks awesome!
❤❤❤Good job, I really like you. Of course I like you a lot.❤❤
I started using the Skil beam chain saw for cutting all my stringers. I've never had a better result with every stringers being nearly Identical. You do need to make sure the chain if freshly sharpened and take your time because the chain is a rough cut but it works great for me!
Perfect
Loving the video series guys you do such an awesome job but why don't you come to Australia and help me build my home
very good idéa
Thanks for using Boise Cascade I-Joists!
Just a thought or two. If you stated your OSB at the back wall you will go faster - you are running long anyway. I like the router, but a skill saw is WAY faster and with the a track saw just as clean. I like to hit the edges of the tread overhang and the OSB at the stair edge landing/opening with a 1/4 to 3/8 round over bit. Less splinters with All the hands touching those edges while walking up, and a real nice edge for those treads that run long. Lastly, you might hide the bottom screw of the stair backing behind the tread itself, and then screw down into the top of it from the tread above, giving you a screw-less look. Really enjoying the videos, I like that you are showing that with just a little pre thought and only a tad bit more labor; you can create a great and long lasting project. Keep up the good work…..
No Earplugs ?? Come On Guys! Of course, Like so many others, I LOVE watching you young men work!
It is about time Greg made the stairs it would be good.
I did back up the video and stopped to take a closer look at your fork lift cert card. Looked legit to me!
28:23 Kyle: "Greg talked me into it"..."what did it give us Greg?"
Greg: "I don't know"
LMAO...love you guys.
Greg, I'm pretty sure that ladder says do not step! :)27:53
‘Kyle’ written on your beam saw reminds me of writing your name on clothes for summer camp 🤣.
16 foot in center… you’re badass! 😂😂
I wanted to have a "bigger" measurement LOL, Kyle you're killin' it!!
I dig the joint im goin to call it a half and half
Shoulda been a singer!
Question - Is the the LVL only held to the existing wall with the GRKs? The screw is more than strong enough for the load, but how does the LVL resist crushing at the screw holes where it is fastened. LVL compressive strength is somewhere in the 700 psi range I think. You guys obviously put a lot of screws in there but it seems like it would need blocking below the LVL instead of carrying the load exclusively in shear off the screws
Kyle: "It's a dumb idea". Greg: "It's a real dumb idea". LOL For the joist hangers on the double LVL I would have used 2 1/2" hanger nails but that's just me.
Would there be any use for a small lap joint over your 6x6 vertical supports instead of a butt hour using toe nails/screws? Just curious on your thoughts.
I know you use GRK and the way you build structure and apply common sense it’s unlikely that particular structure will fail anywhere but if you used a 3” lap joint centered on your post you’re be able to use a few nails for more shear strength, correct? You would just have secure your LVLs to the post using exposed toe nails/screws or use other hardware.
Again, just a thought. It may not be worth the trouble in the end.
Do you use your router to round over the treads? I did on my stairs I build a few years back.
Awesome
Wish you guys were in Ohio. I'd hire yall in a heartbeat to build my dream home.
Yes please do a staircase video of all the math.
You don't use lumberlock on the bottom of your I joist to the bottom of your hangers... We are obligated where I live that why I askjng. Nice project 🤯 by the way
What does your cameraman think about working for you he does a great job, very professional in what he does
A joint never hurt anybody😉
nice deck
Do you ever run into issues with the concrete having the posts for the mezzanine sitting on the slab without any foundation below it?
That was my same question. Whats below those columns? wire, thikness, conrete strength...etc...?
I’d like to know too
What is that glue you used it looks like foam
Was the floor glued down? Thought you mentioned you were gonna do it?
any weight limit concern that the posts are on the slab without piers?
👍👌👏
What kind of glue did you use on the stairs?
Nice.
We're gonna go just like this..haha
I am trying to determine your floor to ceiling height. mainly the mezzanine height for the staircase. .
... and I thought I remembered you putting in the line for a heated floor - and then you drill all those holes in your concrete. I sure hope you didn't hit any... or did you plan for this when you laid them out? Thanks for sharing your dream shop build with us - I LOVE these types of projects.
Heated floor in a cold storage?
Oh my bad - this isn't YOUR shop. Sorry
this is not my shop
@@RRBuildings sir what is the make and model of your LDM please or your LMD?
Hey Kyle been subscribed to ur channel for many years love watching ur videos. Quick question how often do u upgrade ur lasers?
upgrade only if it breaks...I did just calibrate my rotary
how big would you say that shop space is?
RIP Router Bit!
Elvis is everywhere.
I have one question. What manufacturer makes the gun grade foaming wood glue. I have been looking for it in the UK for a while with no success. Seems so much easier than the squeezy bottles, less waste and mess.
I am wondering what the reason you used the I joist hangers instead of setting the I joist on top of the LVL header?
What is the stair square you’re using?
Greg doesn't know what he I s missing to listening to Elvis!
how much was material?
What's the benefit of using I-Joists over say 2x8s or 10s? Researching the best way to add a 30x10 mezzanine in my 40x30 wood framed shop.
Your customers certainly get their money's worth. Great work that'll last a lifetime. Kinda weird, though -- you took pains to make sure all the (nearly invisible) printing on the joists was upright, but left the (highly visible) glue smudge on the riser behind the bottom stair tread. Maybe you had to wait for it to set before you scraped it? 🤔
sander....
Hi Kyle, i like watching your Videos. Just a question why didnt you made an half lapp join on the posts with the lwl?
you think that would have changed anything?
Why not gluing down the mezzanine decking??
Question, when drilling into the Concrete floor, how would you know where to drill when the floor has heated pipes running up it ??
Big saw and safety glasses on top of your hat. 🤫
All of the extra care, cost and effort was put in to utilizing EWP throughout... except stair jacks
Greg definitely carries all his groceries in, in one trip.
Liked how your safety glasses are protecting your hat LOL
I have in floor heat. What should I do for the post brackets so I don’t risk hitting my tubing underneath??
What brand of foam gun do you use?
Atta Boy Kyle 👦
Do you always use RSS screws or do you use R4 as well ?
I use adhesive between metal joist supports and any horizontal wood members. Squeaky floors are the result of fastener movement and movement within those metal supports. Stairs built with solid wood framing can squeak unless all the risers are installed first and then the treads are fastened from behind the riser (along with adhesive as was done). The notching of that rim corner was needless. It is structurally unsound and generally a poor practice. The ledger that was installed should mimic an above ground deck, it should be fastened with lags to prevent it putting away from the vertical supports.
How about a video of building a ramp over an existing set of concrete porch steps .
When are you going to teach Greg how to cut stair stringers?
"Its not going nowhere", does that mean that it will go?