Hi, great video. I want to clad a ugly breeze block garden wall with this same product and would like to go 1 metre past the top of the wall and then clad the other side of the protruding posts ( ie clad on both sides above the top of the wall 1 metre). Is this possible with this product. I want to copy the look on page 37 of your brochure. Thanks👍
Our installation guide can be viewed here - ecoscape.co.uk/resources/slatted-cladding-installation.pdf We recommend lining the wall and apply subframe joists - if you wanted to create the illusion of a taller wall you have to make sure the wall and joists are stable enough. Hope this helps.
I’m getting close on deciding the way I’m going to go with my cladding - however I have a technical question as to mounting the cladding in a vertical position. The fitting instructions and TH-cam video only show single joists spaced at 500 centres. If the cladding is fitted horizontally- then the joists are fixed vertically with airflow assured from the top to the bottom in between the joists. If the cladding is fixed vertically- then the joists are fitted horizontally and - this is where I’m getting confused- as there is no ability for air to pass by the first joist and as a result there is not airflow/ventilation as described in your instructions. Can you provide guidance or assurance on how best to proceed as this will help me order the correct quantities and stock.
The airflow would be provided by the 8mm gap between the cladding board and batten due to the cladding clips. You could however double batten if you wish but there would be sufficient enough airflow with the Ecoscape UK cladding clips as this also provides enough gap between each board to allow for expansion and contraction. We hope this helps!
![ILLSLICK - WINTER IS COMING [Official Video]](http://i.ytimg.com/vi/dwTMeM1zIhQ/mqdefault.jpg)
Hi, great video. I want to clad a ugly breeze block garden wall with this same product and would like to go 1 metre past the top of the wall and then clad the other side of the protruding posts ( ie clad on both sides above the top of the wall 1 metre). Is this possible with this product. I want to copy the look on page 37 of your brochure. Thanks👍
Our installation guide can be viewed here - ecoscape.co.uk/resources/slatted-cladding-installation.pdf
We recommend lining the wall and apply subframe joists - if you wanted to create the illusion of a taller wall you have to make sure the wall and joists are stable enough.
Hope this helps.
I’m getting close on deciding the way I’m going to go with my cladding - however I have a technical question as to mounting the cladding in a vertical position.
The fitting instructions and TH-cam video only show single joists spaced at 500 centres.
If the cladding is fitted horizontally- then the joists are fixed vertically with airflow assured from the top to the bottom in between the joists.
If the cladding is fixed vertically- then the joists are fitted horizontally and - this is where I’m getting confused- as there is no ability for air to pass by the first joist and as a result there is not airflow/ventilation as described in your instructions.
Can you provide guidance or assurance on how best to proceed as this will help me order the correct quantities and stock.
The airflow would be provided by the 8mm gap between the cladding board and batten due to the cladding clips. You could however double batten if you wish but there would be sufficient enough airflow with the Ecoscape UK cladding clips as this also provides enough gap between each board to allow for expansion and contraction.
We hope this helps!
Could this be used on the outside of a horsebox?
We have no testing of it being used in transit so cannot advise on this.
We're sorry we couldn't assit you further!
WAY WAY TOO SLOW.