Thank you! For being deadly! And to the point! So much awesome info in this video! Bought stuff many times from rocky mountain online. Living canada exceptional service!
Having replaced 3 i 120 hours and looking at the installation makes me wonder if it is possible to relocate to a new place maybe attached to the head steady for a 2 minute replacement when needed.Did the engineers deliberately put it in the most awkward place just to make life difficult???😢
Could you guys possibly update the bike compatibility for this part on your website? It only has the gasgas and two KTM bikes but doesn’t show any husqvarna models when I try and look for my bike (2022 Te300i). Great video! You guys show a lot more detail for the removal process then other TH-cam videos.
Rocky Mountain ATV MC not to be a pester…. But the website still isn’t updated for all compatible model bikes. For husqvarna it still says it’s only compatible with the Te150i
Clean the sensor with approved cleaner, check the vacuum hose from the sensor to the cylinder for cracks. Clean the filter to the atmospheric pressure sensor.
Idling issues, mine would stall without the "choke air knob" pulled out. Low end was choppy. I just did this swap and it cleaned up everything, idle's beautifully now
@@zpbeats3938 mine started doing the same thing after a nasty ride. Going to pop these sensors off clean them out hoping that'll do the trick, if not I'm buying a few spar sensors. I thought I HAD to do the idle mod considering it won't idle without the "choke air knob" out but I think this is the fix!!
@@gbulldog35 I still did the idle screw mod actually because mine was still a bit low for my liking. But with the sensor swap it's running crisp! That reminds me, I still need to order at least one of them to swap in for the busted ambient sensor
Thank you! For being deadly! And to the point! So much awesome info in this video! Bought stuff many times from rocky mountain online. Living canada exceptional service!
Having replaced 3 i 120 hours and looking at the installation makes me wonder if it is possible to relocate to a new place maybe attached to the head steady for a 2 minute replacement when needed.Did the engineers deliberately put it in the most awkward place just to make life difficult???😢
Could you guys possibly update the bike compatibility for this part on your website? It only has the gasgas and two KTM bikes but doesn’t show any husqvarna models when I try and look for my bike (2022 Te300i).
Great video! You guys show a lot more detail for the removal process then other TH-cam videos.
On it, thanks! -Charles
Rocky Mountain ATV MC not to be a pester…. But the website still isn’t updated for all compatible model bikes. For husqvarna it still says it’s only compatible with the Te150i
I ran into this too, I just had to put my bike in as a 2021 to buy the part @rmatvmc
Hi, what is that little brass value called just broke mine 🤯
Anyone know why these sensors are failing? Is there a fix besides just swapping them out?
It’s a T20 on 2021 Husq 300TE. At least mine is. Other than that great video!!
The retaining screw for the sensor in my bike (2022 KTM 300 XC-W) was a T20, not a T25.
And also on my MY22 Husqvarna TE250i
Do these cause spark plugs to foul
Yes, T20 , Job is very frustrating.
Clean the sensor with approved cleaner, check the vacuum hose from the sensor to the cylinder for cracks.
Clean the filter to the atmospheric pressure sensor.
What kind of issue are you expected to have from a failing CCPS?
Idling issues, mine would stall without the "choke air knob" pulled out. Low end was choppy. I just did this swap and it cleaned up everything, idle's beautifully now
Mine would run rough at low RPM's then hit the power really hard - @@zpbeats3938
@@zpbeats3938 mine started doing the same thing after a nasty ride. Going to pop these sensors off clean them out hoping that'll do the trick, if not I'm buying a few spar sensors. I thought I HAD to do the idle mod considering it won't idle without the "choke air knob" out but I think this is the fix!!
@@gbulldog35 I still did the idle screw mod actually because mine was still a bit low for my liking. But with the sensor swap it's running crisp! That reminds me, I still need to order at least one of them to swap in for the busted ambient sensor
I replaced mine and now the check engine light flashes nine times and then eventually goes solid and stays on.
It’s a T-20, not 25.