Straighten Rough Wood with the Roubo Winding Sticks
ฝัง
- เผยแพร่เมื่อ 22 ธ.ค. 2020
- Give your winding sticks a homemade upgrade with this diy Roubo design.
More video and exclusive content: / rexkrueger
Now part of the Specialty Plane Bundle!!!: www.rexkrueger.com/store/spec...
Get the plans!: www.rexkrueger.com/store/plan...
ALL PLANS 50% OFF // ONLY UNTIL THE END OF DECEMBER (tell your friends!)
www.rexkrueger.com/store
Tools From this Build (Affiliate):
Bahco Saw: amzn.to/38h9IXZ
Dozuki Saw: amzn.to/3anF2a5
Roubo's book in the definitive English translation (non-affiliate): lostartpress.com/collections/...
Projects I Mention in This Video:
Advanced Shooting Board: • Make perfect, square b...
Get the plans: www.rexkrueger.com/store/adva...
Homemade Rabbet Plane: • Make a rabbet plane fo...
Get the plans: www.rexkrueger.com/store/plan...
Make a Scrub Plane: • Can a cheap smoothing ...
One-Handed Marking Gauge: • Make your own marking ...
Get the plans: www.rexkrueger.com/store/plan...
Become a member of this channel!
Get custom badges and emojis you can use during chats: / @rexkrueger
Sign up for Fabrication First, my FREE newsletter: eepurl.com/gRhEVT
Wood Work for Humans Tool List (affiliate):
Cutting
Gyokucho Ryoba Saw: amzn.to/2Z5Wmda
Dewalt Panel Saw: amzn.to/2HJqGmO
Suizan Dozuki Handsaw: amzn.to/3abRyXB
(Winner of the affordable dovetail-saw shootout.)
Spear and Jackson Tenon Saw: amzn.to/2zykhs6
(Needs tune-up to work well.)
Crown Tenon Saw: amzn.to/3l89Dut
(Works out of the box)
Carving Knife: amzn.to/2DkbsnM
Narex True Imperial Chisels: amzn.to/2EX4xls
(My favorite affordable new chisels.)
Blue-Handled Marples Chisels: amzn.to/2tVJARY
(I use these to make the DIY specialty planes, but I also like them for general work.)
Sharpening
Honing Guide: amzn.to/2TaJEZM
Norton Coarse/Fine Oil Stone: amzn.to/36seh2m
Natural Arkansas Fine Oil Stone: amzn.to/3irDQmq
Green buffing compound: amzn.to/2XuUBE2
Marking and Measuring
Stockman Knife: amzn.to/2Pp4bWP
(For marking and the built-in awl).
Speed Square: amzn.to/3gSi6jK
Stanley Marking Knife: amzn.to/2Ewrxo3
(Excellent, inexpensive marking knife.)
Blue Kreg measuring jig: amzn.to/2QTnKYd
Round-head Protractor: amzn.to/37fJ6oz
Drilling
Forstener Bits: amzn.to/3jpBgPl
Spade Bits: amzn.to/2U5kvML
Work-Holding
Orange F Clamps: amzn.to/2u3tp4X
Screw Clamp: amzn.to/3gCa5i8
Get my woodturning book: www.rexkrueger.com/book
Follow me on Instagram: @rexkrueger - แนวปฏิบัติและการใช้ชีวิต
![อาจารย์ยอด : ลุงแว่วเล่าเรื่องผี [ผี]](http://i.ytimg.com/vi/Fd2Qsy4dqpM/mqdefault.jpg)
the author does like to from scratch, shaping and trimming wood from large blocks into fine finished products. th-cam.com/users/postUgkxD-QRFQz730FJEh4f9BYSf-nkIMIC9hL_ as another reviewer mentioned, most projects require a lot of high-dollar equipment that most of us dont have the room or budget for. But, knowing how to do these things, even if we wont be able to practice the full stack project, is still great.
Rex says "we need to make this" much the same way that Steve Irwin would say "I'm going to poke it."
As an antique dealer I can assure you they are period, wood doesn't look like that without 100's of years of age.
Thank you! Nice to know I wasn't talking out my ear (for once).
I found the Roubo book in french. Now it's when my public school french is much appreciated merci beacoup monsieur Pérez.
Merci aussi monsieur Krueger por ce magnifique livre.
I can absolutely confirm the transformational nature of this tool for my work after almost fifty years in the shop. As I was working my way through the text and engravings when making the Roubo book for LAP I found this to be one of the most innovative techniques for me to use every time I work a board with my hand planes. As for the book itself, I refer to it with surprising frequency to this day! -- Don Williams
Happy Holidays Don! Are you the same Don the plane maker that gave a blade tempering demo at the MWTCA gathering north of Chicago about 15 yrs ago?
@@bluesideup007 No, I'm not that fellow. I'm the one who writes the books about Roubo and the Studley Tool Chest.
Hi, I wish you and your family a merry Christmas and a happy New Year free from covid 19.
Everybody deserves time off around Christmas so enjoy and happy holidays this is the way
This is the way.
This is the freaking way.
this is the way
This is the way
Happy Holidays Rex. Thanks for what you’re doing for us aspiring garage woodworkers.
Wood is the way
Thanks Rex
I really enjoy your videos.
I hope you have a very merry Christmas and a well deserved rest
You are really an excellent teacher and communicator. Even in your first videos we could see that you would be big a...king one day. Bravo.
2:43 I'm sure I mentioned this before, Rex, but I am in the UK. I have visited at least one old, old house with a Tudor oak staircase. I've experienced that finish.
The finish you get from human hands is like almost nothing else. They smooth and treat oak like nothing else.
The reason I am posting is that I am sure one of the guides mentioned that walnuts sometimes were rubbed against the oak.
Have a great Christmas and a good slide!
Just for the superglue trick, every minutes were worth it. Cheers!
Enjoy your break!
This is the way.
Nice. Great video as always Rex. Well found!
Have a great break fella! See you in 21!
Seasonal greetings and blessings to you and your family. All the best for the new year.
I saw a very old set of these sell at an auction for $2500. Yours is in much better shape then the ones that sold. There’s not many of these still around. I think you got yourself an excellent find. Good job.
I was just thinking today while shooting the end grain on some wood, "I hope Rex takes some time off for the holidays...". You deserve it dude.
Nice video Rex! You deserve a vacation... Eeck we all need a vacation off this year
Rex belongs on PBS this is a public service.
You can also use masking tape and superglue together: tape both surfaces and glue the tape. It’ll hold router templates to your work.
great project! I suppose this is like putting spacer blocks under normal winding sticks, but after a while, Roubo wanted the spacer blocks built in.
Rex. You have more than earned a break.
Merry Christmas, Happy New year!!!
Enjoy your break.
Good presentation.
Thanks for the book ref.
Have a great new year with all the family.
Great stuff Rex! I love history mixed with practical skills!
I fell in love with the tools described in Roubo's l'Art Du Menuisier, especially the moulding planes planes, which you and Paul Sellers made a couple variants of before. The open sided French/Roman design is so much easier to create, despite being chunkier and a bit boxier (especially with the wedges) than the English patterns.
It's a shame that this style of plane seems to have fallen on the wayside outside of the rabbet plane that looked to be reintroduced to everyone by Paul Sellers. The 19th century French fillister plane I have in this style is pretty nice (need to make a new nicker though) and looks to be pretty easy to reproduce with hardware one can either buy at a hardware store, like threaded inserts for the fence and depth stop, or make on their own with the blade and nicker.
Definitely gonna be making these winding sticks next. They look sweet.
Super team strikes again! I just watched a 5 year old Wood by Wright winding stick with ebony inlays video, and was all set to make some. But then your awesome video came up, and it's a very cool upgrade, so I'll be making them with feet!
You guys make a great pair, like the superheroes.... Hmmm 🤔. Batman and... No. Luthor and... No. Fester? Nah. Ah! You're the Professor X and Wolverine of hand tool woodworking! :D
Always watch and enjoy your videos! Have a Merry Christmas and thanks for all the videos.
Happy holidays to you and yours too.
There might be a reason winding sticks traditionally is one of the first projects of a new apprentice
Forty years of wood working and I've never seen or heard of Moxon winding sticks. Those are awesome, especially that reference surface trick. Thank you for introducing them to me. I will be making some in the next few days.
Yeah, I like the rebate/rabbit reference surface trick too. Such an inspired method of finding a planar surface for reclamed timber/lumber. It seams that it would save time, overall, as well.
To be honest, when I learned my trade as a bar fitter 40+ years ago, we only ever used things like two long spirit levels as winding sticks (a spirit level across each end of a long bar top, for instance) because the critical pieces (bar or counter tops) were much larger than what most people work on. We had learned about winding sticks in our training but had no real world use for them for what we were making, so we just went up a level (haha, I just realised what I wrote - no pun intended).
Any two pieces that are exactly the same profile can work as winding sticks, even if they are not parallel; they can be wedges of the same angle and they will still work as good when the narrow ends are at one side and the thick ends at the other. Parallax is not important, so don't grieve over it; just get them equal and put a mark on both narrow or thick ends, so that you know how they marry up to make them work.
Anyway, all that aside, I've got it in my head to make some winding sticks and I want to make good ones. I like this pattern that allows them to be used on both rough timber (lumber in USA) and machined timber. Personally, I would prefer to have them made out of something like aluminium but a stable wood will have to do.
This is the first time I've seen that variation on winding sticks. Thanks for the video!
Say hi to Stella for us, and enjoy your time off!
This is so great! Your final sticks are beautiful! And when you show how to use them-and your own interpretation of the design-my mind was officially blown!
Enjoy your holiday!!! Thank You For the videos!!! Much Appreciated!!! I actually caught this one 🌲👍😁👏😎
As is often the case you present a lot of learning in your video's. Take the time off and come back with even more great stuff. Merry Christmas
Enjoy your Christmas break with family (& the alien from far, far away) stay safe & Covid free. We'll be here when you get back.
Take a break we’ll be here when you get back. Merry Christmas Rex
If I had these things Rex just made, I'd use them to gauge the wind on a rough plank... and then put them back on the mantle.
Have a nice break Rex. I really enjoy your videos.
Great project Rex. Thank you for sharing. Have a happy holiday and stay healthy.
Thanks Rex, enjoy your break! You rock
Wow, great video again Rex😎 I made winding sticks 2yrs ago, but here's 2 ideas. Could make feet just to slide on and maybe add a little spirit level thingy in centre of sticks
Thank you and Merry Christmas.
Rex i think you should make a dicord server for people to discuss woodworking more directly and more effectivly communicate with you, or just posting pics of their progress
Happy Holidays, Rex! Have a great vacation, and get some rest.
Rex, thank you for your humour, for being an inspiration, and for the instructions. I especially enjoy the vise and bench videos.
Merry Christmas!
Hi Rex! Your communication and story telling has always been great, but your woodworking skill is steadily improving, very quickly. If you continue, I think In 10 years time you'll be crazy good :)
You do the coolest wood working videos
Happy Holiday, thank you for all the great content.
I really appreciate the historical tools . Roubo was a pioneer in furniture making I believe .
Happy holidays to you and yours , have a blessed new year.
Happy Holidays have a good break! Thanks for the great content.
Just bought the Plane Bundle. Thank you, Rex. Have a happy new year!
Thank you Rex for all your vids, hope you and the family have a great Christmas and new year.
Happy Christmas and Merry New Year to you and yours, Rex
Marry Christmas Rex. Health and joy to you and your family. This is the way.
Hi Rex, Thank you for a great year of sharing. I hope you have a great Christmas and New Year.
Have A Merry Christmas and Happy New Year Rex and family
Fun video. Have a great time with the family, a wonderful Christmas, a happy New Year, and a lovely time off.
All the best to you and your family!
Thanks for the videos over the year Rex, this is definitely one of your clips that makes your channel stand out from the rest. Hope you and your family have a great Christmas
Enjoy your vacation, you have earned it.
Have a Merry Christmas and a blessed new year.
Proud patron here telling you to take whatever time you need, Rex; lord knows you've earned it. Stay safe and happy holidays to you and yours, my friend.
Merry Christmas to you and yours! I hope that your family remains safe and happy. Thanks for all do for us!
Merry Christmas and a Happy New Year Rex, THANK YOU so much for all the Instruction and entertainment this year - Looking forward to an even more successful year for you in 2021!
That's a pretty cool wiget. I think I need one. I've been doing the same basic thing with regular winding sticks and setting little gauge blocks underneath.
Excellent video and project. Merry Christmas to you and yours, Rex!
Merry Christmas. This channel is starting to make me believe that woodworking can be a very affordable hobby to get into.
I guess we know what an upcoming one off run new Woodpecker tool will be, except their's will be in red anodized aluminum. I am guessing we'll see it before the end of 2022, at least some version of it, or feet that can be added to their winding sticks (now available with spring loaded detents for easy removal should you want to remove the feet accessories).
[Contrasting bare/bright silver aluminum stripe across the top of one winding stick for easier visual differential].
enjoy your vacation, Merry Christmas.
Rex, God bless you, happy 2021, receive a big hug from Puerto Rico and tons of blessings from Jesus to you and your family!!
Ray Ray
period correct face, classic Rex
Mate youre a freakin legend. Ive learnt so much from you and the crew on the discourse page.
Merry Christmas and a Happy New Year from us down under!!!!!
Great video... as always! Have a Merry Christmas.
Merry Christmas Rex. I wish you and yours peace and prosperity for 2021, at least!
You have a winner here, Rex! Haven’t seen any mention of these in the common old-timey texts, never saw any in use. You are ahead of the curve, dude. Cowabunga!
Yeah! Supertool! Bought your plans! Nice Rex-project along with the other tools I'm making from your channel! Thnx Rex!
Thank you for taking the time to share this. :)
I love how you waved about that scrap of walnut like a magician!
As always, a really well put together video.
Hope you're having a relaxing and enjoyable break. Best wishes, Rex.
Rex, great video! Not only the woodworking aspect either. I've noticed your video quality has been really really good lately. Merry Christmas!
I love this channel. Have a very happy and safe Christmas 🎄❤️🕊
Rex, your content is pushing me over the hump to go out and create more than anybody else. Your practical combination of quality-built traditional tools and modern power tools, (where appropriate) is economical and very satisfying to interact with. Thank you for all you have taught me, and will in future.
You deserve a good break. Another fantastic teaching video. I just love the historical references you come up with. Merry Christmas and enjoy your new year. Oh...and may the force be with you!
Enjoy your vacation.
Nice! Plan on doing this w/ my son over the remainder of his winter break.
Enjoy your time off!
My typical windings sticks have a veeery small bevel along the top edge on one side of a stick. This reflects the overhead shop lights, so when sighting down the board the far stick has a bright upper edge. This really helps picking out the far edge.
Ive been using a smaller version of that saw and can say, it is pretty awesome
Thank you for this delightful present :)
Combining history and woodwork is unique and enjoyable. I encourage you to continue as we follow you into 2021.
Very cool project, always great to learn something new. I think your the first person I have heard say it's been a great year, good for you. Merry Christmas and enjoy the family and time off.
Happy Holidays Rex!
Great video!
Thanks Rex, Merry Christmas ! Enjoy the Va Ca !
Fantastic find and reproduction! I use winding sticks all the time, but never saw ones like these. Thanks.
Pretty fantastic work, Rex! 😃
I'm going to make a couple of those!!!
Happy holidays! Enjoy with your family! This is the way! 😊
And, as always... (Until the pandemonium ends at least...) Stay safe there with your family! 🖖😊
Good stuff! Merry Christmas to you and yours.
Interesting take on winding sticks. Oh, and hope you had a merry Christmas and have a great holiday!
Im a total woodwork/hand tool newbie. I really enjoy your show. Thanks for all the work you do.
Have a great holiday.
thanks for those explanations. loved to rediscover the Roubeau litterature :). Merry Xmas
Thanks for another great video and learning experience. I hope you and your family have a very Merry Christmas. Please stay safe, these are risky times. Sent from Vancouver Island, BC Canada.