How to change PC Plate Feker IK75
ฝัง
- เผยแพร่เมื่อ 16 ธ.ค. 2021
- Feker IK75 Triple-mode Mechanical keyboard kit
- Bluetooth, 2.4G wireless and USB-C wire mode
- 8000 mAh Battery
- Hot-swap PCB
- 32K Rom
- Gasket mount cases
- 1680M RGB
IK75 has two plates along with the kit. The stainless steel plate is pre-insalled. You need to change the PC plate by yourself. In this video, KPrepublic shows the process of exchanging.
Get it on KPrepublic.com
kprepublic.com/collections/ne... - วิทยาศาสตร์และเทคโนโลยี
I can't wait for mine
Do you know what screw sizes are these and what type of stabilizer screws
omg thank you!
hi there, do we have any specs regarding response time? I want it for gaming!
Can I know the exterior, inner diameter, and height of the knob?
where can i buy replacement stand offs/screws
Does this kit require soldering or does it come basically ready to use out of the box after adding switches/keycaps?
Ready to use, you can see the sockets for the switches on it
i tried it, but my screws are to small for the holes.. they are falling trough. @KP republic u know any fixes?
there are screw holds, please try not to use the screw holder.
Can the software be used to re-assign key ? heard someone saying it can be done using the Macro function but have yet to find any video guide to do so
the software can change the keymap
Hello, do you know if this specific pc plate would work with the next time 75 board?
@BIGCHUNGUS123 Nope you can get it separately. Reason why I want it is because the next time 75 is in solid black, however it only offers an alu plate where I'm from. Both boards are very similar in form so I just wondered if the pc plate could work on both boards.
do i have to put the switches out, before putting off the gasket mount?
hmm, I don't think so. you can try
Did you have any difficulties unscrewing the pcb holders? Cuz mine are so screwed in that i physicaly cant screw them out
You can try to use a paire of piler to unscrew them.
Hello, I would like to ask if the feker ik75 hot swap has software or not.
yeah it does just search on TH-cam feker ik75 software and videos on it should appear
what screw driver is that
is it included in the package? or do we have to buy it separately?
The PC plate is along with the kit :)
Hi, can you tell me what sides of the stand of did u put on the pcb and plate,plus what screws you used, tnx! I can't seem to crew mine in, it would rather be very loose, or would completely fall out
the screw i use is coming with the PC plate which is packed in the PC plate bag. 6 bronze screw holder and 12 screws. 2 screws and a screw holder is one pair.
@@KPrepublic are there diffrent sizes of screws?
@@lancealcantara1439 you mean the 12 screws from PC plate bag, don't you? If so, they are same size. You need to screw in them from the plate side and PCB baskside.
@@lancealcantara1439 I'm guessing your screw heads are too small. Same here. I left the pcb side screws out, clipped the support stands that go through the pcb to the plate, and optionally you can trim the tops of the gaskets flush with the bottom case and stick some bench mat type foam under them to give more cushion. Use the spacers between the pcb and plate. The foam behind the board will keep the pcb pushed up and removing the supports will allow the whole setup to flex more like a gasket mount and you won't need to worry about the back screws. The smaller side of the spacers will keep the plate and pcb lined up
@@lancealcantara1439 I also tape modded the back of the pcb aswell which would add some more material to help keep it pushed up
You don't need to remove poron pad.
I have the keyboard Already. Where can I buy the poly carbonate PC Plate itself?
the kit we have already included the plate in the kit
What is the material of the extra plate friend?
Polycarbonate
my feker ik75 alt key doesnt work seems lng the terminal of the switch got pushed deeper what to do
please kindly contact kprepublic.com via chat with your order number and issue description. :)
Super confusing the pcb can just slide right off the plate because small screws diameter is smaller than pcb hole diameter you can’t have both screws tight on both sides the screw ins aren’t long enough for it
The driver is not working on my kleyboard : /
Where the updated video? my feker ik75 doenst come with screws or standoffs
if you mean the PC plate screws pack, it should be in PC plate pack. Please be careful when open the PC plate pack
@@KPrepublic im waiting the factory send to me, my package was missing
Idk how u got it in without it being wobbly and lose as hell
The knob is difficult to remove. D:
yep
I used a keycap puller to remove mine, and it came off really easily!
absolute trash. they're now shipping the keybord with the wrong size screws. the screw to mount the plate from the pcb side are the SAME size as the ones to mount the stand offs and the pcb holes are too big so the screws just fall through. impossible to mount the pcb to the plate. absolute garbage. and this is a known problem.
I think I’m having the same issue I got mine from banggood and they are giving me the hardest time about a refund even though the screws I was given were obviously the same size so when I try to mount the pc plate to the pcb the screws won’t go in. Sent a video of the issue and everything but they only want to refund me $15 of the almost $80 I paid like wth!!!
AAAARRRRGGGGHHHHH lol Thanks for this and letting me know I am wasting my time lol
Also no extra switches like so many other reviews have shown
@@md278x ugh did you order it too?
@@leahgiselle3070 I had to 3D print tiny little washers so the screw head wouldn't fall through the PCB hole anymore. It worked out perfectly. But obviously not everyone has a 3D printer. I remember going crazy over it. So ridiculous they wont give you a refund.
It was so not worth it ;__; the pain, the wrist and back pain. Ended up liking alu more i think
how did u pop the upper case?
@@op6119 it was very annoying for me to do but with some metal and plastic pryers I could do it.