Feker IK75 Custom DIY Keyboard Kit THOCC?
ฝัง
- เผยแพร่เมื่อ 4 ส.ค. 2024
- Feker IK75 Aliexpress Link: s.click.aliexpress.com/e/_AXow7r
Amazon Links:
Feker IK75:
US: amzn.to/3uOb47N
CA: amzn.to/3J0JgCl
UK: amzn.to/3wXtc1D
International: geni.us/0KcAdI
Akko PBT Keycaps:
US: amzn.to/3ubVFhj
CA: amzn.to/3qiF7mw
UK: amzn.to/3wkq6Ve
International: geni.us/MHVcI0a
Akko Lubed & Stock Switches:
US: amzn.to/3wArz9V
CA: amzn.to/3quSwrJ
UK: amzn.to/3tyev38
International: geni.us/j0pYVt
Asceny Stabilizers:
US: amzn.to/3GUP8MF
CA: amzn.to/30FRcst
UK: amzn.to/3qatI7G
International: geni.us/hASzTI2
Krytox 205 G0:
US: amzn.to/3p69Tz2
CA: amzn.to/3IZliZf
UK: amzn.to/322jaQ4
International: geni.us/DR7LCZq
Dielectric Grease:
US: amzn.to/3F0JN5o
CA: amzn.to/3D1B3LO
UK: amzn.to/3BWTEYf
International: geni.us/QYrrmKJ
Painters Tape:
US: amzn.to/3CZgyzA
CA: amzn.to/3bTvUJZ
UK: amzn.to/3H3jWMk
International: geni.us/etkKrk
X-Acto Knife:
US: amzn.to/3Cr16fd
CA: amzn.to/3bjYUdI
UK: amzn.to/2XUu2xe
International: geni.us/9Fnd9G
Scissors:
US: amzn.to/3n6aNKk
CA: amzn.to/3G7dB1f
UK: amzn.to/3G9DSvQ
International: geni.us/vOaBLNc
Today, I'm doing a video on $75 Custom DIY Keyboard Kit THOCC?. In this video, I do a complete build of the Feker IK75 with Akko lubed Matcha Green CS switches, and Asceny plate mounted stabilizers and do a sound test. I also do a full review of the Feker IK75 as well as mod the Feker IK75 keyboard. If you wanted to know if the Feker IK75 gasket keyboard kit is a great budget DIY keyboard kit, this is the video for you. If you guys enjoyed this video, $75 Custom DIY Keyboard Kit THOCC?., drop a like below. AND if you have any questions about the video, $75 Custom DIY Keyboard Kit THOCC?., leave them in the comment section. This was Consumer Tech Review, and I'll see you guys later!
FTC Disclosure: As an Amazon Associate I earn from qualifying purchases.
Timestamps:
0:00 Feker IK75 Building & Modding
13:32 Feker IK75 Build & Sound Test
Email for Business Inquiries: consumertechreviewbiz@gmail.com
Check Out My Monitor Channel:
/ @typectechreviews
Follow me on Instagram: / consumer.tech.review
Join The Discord: / discord
Follow Me on Twitter: @ConsumerTechCTR
Add Me on Snapchat: haleflare
This video includes affiliate links. - วิทยาศาสตร์และเทคโนโลยี
Actually the stock stabs for this board are literally some of the best I’ve seen.. 100% would use them in every build if I could
oh cgbuild!! i watch your videos
@@Acorniscute yea hi cg build
@@zusidtechgamingandrc whats good!
lil dielectric grease and holee mod for space bar and it makes a heavenly sound
hi do you know if i could replace the kno b with a white one and where can i possibly buy one? :(
This is the keyboard I have my eyes on for a couple of months now, glad you reviewed it. I really enjoy your budget keyboard reviews and mods + 1 sub!
I was just thinking about getting this board, good stuff dude an instant sub
That sounds incredible. I would have loved to hear what it sounded like stock though. Just out of the box, switches and caps
You really are our savior for budget builds. I appreciate all your videos. Another board I could suggest to review is MK870.
Just ordered it, video coming soon!
@@ConsumerTechReview woah! Just in time, i ordered mine too. Will follow your mod lol
Wow, thock is way better than I thought it would be for a $75 keyboard. Very impressed.
its a pe foam and tape board bruh, it sounds like every single tape and pe foam board
@@r1z3n30 L
I wonder how this would compare to the Akko PC75B Plus. I am thinking about picking one up as my first mechanical keyboard but haven't seen many reviews on it yet. its $109.99 so a little more expensive.
I’ve been using that keyboard for a few months already and it’s very nice. 🎉
This is a great little board. Plastic fantastic!
Oh yeah, good ol' Akko stuff 🔥
YES THE REVIEW IM WAITING FOR
Thankss!!!! You helped me with my first mod! However, I wasn't able to fix the spacebar as I didn't have new stabs or lube for stabs yet
This Feker DIY kit is really really good, this battery life is hugee, for my country its 95$ total.
Today my 75% Akko prebuild came to me, got it probably mostly thanks to your 65% video and im super happy with it. Also got it for a great price in discount, just 98$ with taxes
which is your preferred so far? is it the akko pc75b
How would you rank Mk870 , fiker ik75 , akko 5075 and th80
For me layout doesn’t matter ?
Okay pls help, i need to know feker ik75 vs the akko pc75B plus??! which is better
Another great budget board to review would be the mw65. South facing, supports screw in stabs, and a nice looking stacked acryllic design.
Its north facing leds
@@jefjef3967 we talking about the same board?????
Its not the one in the video if that’s what you’re meaning
@@Mungle_1140 yeah i didnt see the mw65 on you post sorry
@@jefjef3967 alg bro
Which one would you recommend me from those two: Ik75 vs tes84? Thanks
yeah the eclair looks devine with that rgb stripe and large bevel. barrel knob. one of a kind
Do you know what’s the difference between Feker IK75 Pro and the IK75 v3??
Waiting for this review...i got the blue one and akko jelly pink👍👍
What mods can't you do with battery keyboards? There's some that present for issues. It's the tape and pe foam mod okay?
I built the cheaper, wired only, Next Time 75 kit. Sounds pretty damn good for $50. It definitely needs more foam, tape mod and tuned stabs but that’s just regular practice for most kits. Worth a look if you don’t need wireless.
Oh you accidentally helped me, I was planning to buy this but in this video it had a battery and was about to forget about it until if found out it had a wired version lol
Is this keyboard any good for gaming? I’m deciding whether to upgrade my keyboard or mouse
@@kekeuwu3957 if you have a decent enough keyboard upgrade your mouse if you just wanna game if not get a redragon board
does the amazon one come with the polycarbonate plate as well or is the polycarb plate just from aliexpress?
I’m trying to build with this board now but for some reason my spacebar is so mushy. All of my other stabs are fine. Any recommendations?
This keyboard is pretty damn good, but do you think you could briefly cover the drivers?
Hi I would just like to ask if you know the firmware version of Kefer IK75? I’m having some issues on the firmware of mine. Thanks in advance.
Does the stock stabs need any clipping?
What screws does the Feker IK75 use for the polycarbonate plate?
Where could I get a different plate? Is there a certain form factor that fits
Does this support switching among multiple devices using Fn + Q/W/E?
Hey do you plan to review the akko PC75B? They finally came out with new colorways other than the lunar new year ones and I might get them or the 3068B.
Brother please make a video on "Rk61 pro Vs Rk84 pro" since I want to buy a one of these keyboards but don't know which is better
Ohhhhh baby I'm gonna get this.
Thanks for the review. I'd be interested in seeing how it compares to the Epomaker TH 80 which is also a 75% with a volume knob.
This
This sounded so good, might buy one after I'm done with my new keychron
Bro can you compare it to the akko acr? ( I just wanna know which one is brighter😅)
Where can I get your dark grey mouse pad bro? It looks great!
Auto buy! Thank you!
idk if this keyboard is the same as the NT75 but ill try to do all these mods to that keyboard
Do you think I can mod an Akko 5075s (diy kit) in the same way?
Thanks for your great vids
Please help me as I trust you alot please let me choose what to choose k552 / k17fizz/ k630 Black with only pink led. I've searched for k631 but is not available in my country and I wasn't even able to find k630 in white with rgb I'm from India 🇮🇳 and problem with people here is that they'll buy great PC with i7 and 3070 etc but always go for cheap membrane keyboards combo so keyboard manufactures don't care about investing here I want even able to find rk keyboard so just completely forgot about custom one
Haven’t seen a comment about it but feker makes a silicone kit that’s already made to fit the keyboard perfectly
How would you compare this to the CIY Tester84?
Hey man nice video, you should mod the K530 Pro next
why i can't connect to 2.4 mode, even though when i plug in the reciver, the computer receives it and the keyboard doesn't work
Now you need to try the next time 75 Lamo
Are there other rgb modes or is it just the one in the video
I feel like PE foam mod makes nearly every keyboard sound more creamy and it makes it sound so good imo
Oh absolutely!
can you use Gateron milky yellow pros (5 pin) with this board?
can we combine the pe foam with the stock foam there?
Will the feker Ik75 work for the ps4
Can you make a review of the Akko PC75B plus board please, it is a competitor to this, and would be great
I wish you had longer segments for the sound tests.
does this have a dedicated prints screen like keychron k2 and yunzii 84
Does it have any problem with cherry profile sir ?
How light is the keyboard after mod?
What are the speakers in the back? Please reply!
Is it wireless? I noticed you were typing without wire in it
Will you review the redragon aps because i couldn't see any reviews about it i want to see your review before buying it
Hey! What type of akko switches are similar to Redragon Brown switches? I have another Keyboard with red switches and I want some switches similar to Brown Redragon but not the same...
just search up akko tactile switches
Update, feker now offers silicone dampener kit, both for the case and the plate. It's $15.00 plus shipping. makes your both damn heavy.
There's also an option for porn case/pcb/pe foam as an offering for less than $10.00 plus shipping
Can you make an update on the k599 please? I'm planning on buying it
woah, what about those speakers though! what are they?
Hey CTR! Thanks for another fantastic review on yet another great keyboard option I’m really looking into. I watched your review on the Akko 3068B and loved almost everything about it for the price (especially those included $60 beautiful pink & black keycaps), but it lacks the fantastic build and sound of the IK75. Which do you think is a better bang for your buck? Thanks :)
sorry for the late reply but I found an ik75 in shoppe that goes for 50 or so dollars, not sure if it's legit tho
there were reviews and people seemed to like their purchase
sounds really good!! can you custom its 65%, the Feker IK65
This board would be a good candidate for the new clear akko keycaps!
YES!
The EPOMAKER Eclair 75% looks really good to me, and I cannot find any reviews on it. You should check that out! Love the vids.
Yes please do this!!!!
8:49 Were *looking* at you Glorious
Where can I find the Poly board. I have a next time 75 and I think it would fit because Feker and Next time are similar. I'm using the Aluminum board and want to switch to the poly. My Gmk67 has a poly board and it sounds so creamy. If anyone has a link Please let me know :)
Where can i buy that policarbonate plate?
Hey could you please review the Redragon m991 gaming mouse whenever you are doing another mouse review
Total dimension of this keyboard?
Do you think I should get this? or the GMMK Pro? do you think the budget still keeps it up to standards?
Between the two this one is easier and more fun (in my opinion) to mod. That being said, overall the GMMK Pro feels more special. Hope this helps!
@@ConsumerTechReview Thank you!
awesome stabs but the screws are just too tight. A lot of people including myself ended up with stripped screws+some hotswap sockets were loose unfortunately.
hey man can u suggest me a budget keyboard that thocks from china?
You should check out the mw65, Mk870, or the Next Time 75
Nice, can you do one of the th66 epomaker
It would be nice if you used the stock foam so we can hear what that sounds like. I watched several videos with you doing PE foam can you at least give us a comparison.
Did he mention where he got the black foam? Seems like the video skipped that part.
"I don't even know what I'm reviewing!"
Lololololol
wassup CTR!! You should mod Pulsar PCMK TKL and 60% keebs 👍👍
Does it works with optical switch ?
How can I know about that compatibility ?
If it has multiple holes or sockets on the board then it’s mechanical,
One hole with infrared LEDS is optical.
has anyone tried their ik65 keyboard? i just havent found much reviews on here yet
Ok I’m currently installing the Pom plate and trying to screw everything back together but for some reason the screws that attach it to the pcb won’t fully go in, am I not supposed to fully screw them in or am I doing something wrong? I’d really appreciate some help cause I can’t find anything on the issue.
Same problem here!
@@ytevertonpedrolo I actually found a video that shows how to correctly change the steel plate to the Pom/pc plate and it confirmed my suspicions that I was sent the wrong screws, there were 2 types of screws but they were literally the same size which prevented me from properly attaching the pc plate to the pcb. There were also a few others in the comments experiencing the same issue. I’m assuming you bought it from Banggood so I definitely recommend you put in a refund request if you don’t want the board anymore, but make sure your persistent about a full refund cause they won’t offer you one and they’ll try to offer a way lower price. Also make sure to mention you want to return it in your refund request cause they’ll try to get you to accept a lower refund without returning it so they don’t have to pay for shipping.
I have unfortunately been stuck in this process for over 2 weeks now and they only just agreed to a full refund a couple days ago, so just be persistent.
Hopefully things work out though with whatever you decide to do with it.
Oof the stabilizers, holeeee
Pls make k599 mod guide
Where did you get the poly carbonate plate from?
It comes free inside the box
keyboard is fire
Can you do ik73 pro?
where do you buy for 75$
Does the gateron milky lineup, fit in that keyboard?
Yes!
I’ve been looking at this
My unit didn't come with that cable. Sad :(
Can I cut out the PE foam where the switches go, or will that take away the creamy sound. Plus nice video
yes it will! the foam being under where the switches sit is what gives that sound! hope this helps!
Thanks
Please do a review for rk68 plus
What should be the thickness of the PE foam ?
Depends on your keyboard bottom case overall height and space. Normally 1mm PE foam is enough since we don't use that kind of foam for sound absorption henceforth we don't need thick layer of PE.
You can buy it on aliexpress for around even 30$, white version.
You should try out the mk870 keyboard, it has south facing pcb, silicone dampener, supports screw in stabs, can buy extra brass or polycarbonate plate, rgb, prelubed stabs and for only 80 bucks
you mean mk870
@@r1z3n30 yes, sorry
Is this tkl?
That one doesn't have a knob though
hope you make a vid about jjk84! :)
is Polycarbonate plate better than aluminum?
polycarbonate plate makes your keyboard bouncy
this is the exact build im making lol