It was so great seeing all of your contributions to this project and how you pushed Jimmy even further than he would have gone. I only wish you were still going to be around for the big event!
How did I miss this build????...Really awesome!!..I love that welding table...I have to build one of those....Super cool!!!...That was an incredible amount of work that went into that beautiful little go-kart...
It works as a CVT. As the rpm rises, it modifies the torque coming from the engine to the wheels. it mimics changing gears to a closer ratio as the rpm increases, as the rpm decreases it brings the ratios further apart like 1st gear would be in a vehicles transmission.
Sure, we'll just whip up a go-cart... sounds easy, right? So many details!! At one point I said, this does NOT look sturdy... then Jimmy adds steel rod trusses and it becomes solid as a rock. Very cool that some bona fide craftsman stopped by to lend a hand.
steering arms should point to center of rear axle, king pin should be angled so it points to center of spot where tire touches the ground. Also should have king pins rolled back a few degrees. Great cart and nice to see the others helping!! Thanks for the video Jimmy.
I was very pleased to see the details you have outlined, the geometry of the front axle/steering components will make a world of difference, good to see you have a simple explanation that is absolutely correct, 👍
Super fun build, love the jalopy look! I've been following Neil for a while now and love his work too. It's fun to see you both working on a project together. I've heard him talking about "my mate Corin" many times, so it's fun to finally see him in front of the camera. Thanks for sharing!
Still can't get around the fact that you got Neil Paskin just casually joining your project. On a more general level I think the tools in a shop matters less than all the people either in the shop or along your maker journey. Great build!
That this was a group project makes it so much better! I loved the teaser shots of the trial run weaved into the build video. Thanks for sharing Jimmy!
Beautiful, Jimmy! Amazing work!!! 😃 Unfortunately, Neil shouldn't be there anymore... But if he is, give him a hug for me! Stay safe there with your family! 🖖😊
I can never get enough of your videos. I’ve been a fan for a very long time. I learned so much from your work. Thanks for always sharing your talents with us. I love making Halloween props so my favorite one is the first coffin build. Must have watched that 100 times lol
Wow! What a fabulously exciting, swift & awesome build, everything coming together into a splendid & beautiful red race machine, the components competing with each other to take their station without delay as though in a racing pit stop, desperate for the track. Such a joy & delight to watch! Thank you for sharing!
You're such an inspiration Jimmy! Not only in making, but life in general. Watched a documentary on you last night on youtube and just wanted to thank you for the inspiration over the years. I've been watching since Hammered & Dirty Money and followed you along the years. From when I was a teen, now I'm 35. Now I'm working on getting my own land oasis's and have my work spaces in Northern California. Even though I have never met you in person, I can tell you're a genuinely cool dude and when I "grow up" (don't think we ever will) I want to be like you! Love your videos and wanted to say Thanks!
A little steampunk air this Kart 😍 Phileas Fogg would certainly have used it for his world tour. Another superb achievement, thank you for this show Mr.
The transmission you use is a VARIOMATIC, invented by Hub van Doorne, Eindhoven-The Netherlands in the ‘60th. It was first used in the DAF33 automobil, a funny little dutch familycar, my father owned one.
Instead of using a CVT transmission it would be sick to upgrade it to a Shifter Kart because that classic feel would really complete this build, that and some proper scooter rims and tires
Amazing! Always the just about perfect ratio of exact versus eyeballed! The technician and the artist all in one craftsman. Always a treat to watch, always something valuable new to learn. Also there might be scratch built go carts before but the 20s styling on this one is right on the money (expect perhaps the CVT and the disk brake, but again they both somehow don't seem to subtract from the style much if any)
Sick build so inspiration seeing pask and corin play there part to. Really showcases the versatility and use of every machine you have. Definately one of my favorites so far. 🔥🔥🔥🔥🔥
Had you ever built a go-kart from scratch before ??? Was awesome watching all of you working on the same project. My father used to build go-karts and mini-sprints and it's always been something on my bucket list of things to make.
It looks fantastic. A great match up for the great race. Let that monster cart with the snow mobile engine do its best to steal the show......alas...You'll be ready for him this year! 1924 Lives on!!!!
This looks incredible and I can’t wait to see it in the flesh! Even keeping up on Instagram there are so many more parts on this build that I thought were off the shelf components that you actually built from scratch. But besides that, the visual appeal of this thing is just off the charts. I didn’t think you could outdo last year’s build but it looks like you did🙌🏻
Ah! I see that your entered colin furze vehicle build territory ? Just make it fly, and you have won 🤣 Great video and you grow better with age. Love from Scotland 5* 😁
@@kiiiisuand snowmobiles. There was also an Eastern European car called the DAF that used a pair of them (one on each rear wheel), and no differential.
Awesome Jimmy! Thanks for letting us join in, it was fun times! You'll have to visit us some time (and bring Derek along too!). :)
Absolutely! What a fantastic end result too!!!
thank you guys!!! happy we got this record xoxo
Hey Neil this looks suspiciously like Peter Brocks first car🤔
Did you give Jimmy any inspiration on this build?
It was so great seeing all of your contributions to this project and how you pushed Jimmy even further than he would have gone. I only wish you were still going to be around for the big event!
I just said to myself-hey, I know that guy! Love seeing the collaboration! Love your content Pask!
Diresta and Pask in the same vid?!? Must be our lucky day!
Wow Neil Pask in the house! Pretty sure Neil and Jimmy together could build just about anything
I've often said Neil could probably make a jig to construct a nuclear plant in one operation. lol
Yep, they even built a friendship.
Absolutely!
بارك الله فيك
How did I miss this build????...Really awesome!!..I love that welding table...I have to build one of those....Super cool!!!...That was an incredible amount of work that went into that beautiful little go-kart...
Lot's of big brain in that shed!!! Neil, Corin and Jimmy!?! whoa..
It works as a CVT. As the rpm rises, it modifies the torque coming from the engine to the wheels. it mimics changing gears to a closer ratio as the rpm increases, as the rpm decreases it brings the ratios further apart like 1st gear would be in a vehicles transmission.
3:10 “This is a wheel, it’s wheely good. It goes wound.” Thirdeen seconds of high class comedy, and more.
Haa yeah that's how I ROLL
أنا من المتابعين لكم
من اول مقطع في اليوتيوب والى الان ،ولم أرى انسان مبدع مثلك
أنت انسان موهوب تستحق التكريم
Hmm Pask Makes, wonder what he's doing there. Hopefully a big collab. Great to see you working together.
What a lovely surprise to see Pask over there.... Cheers guys!
IVT or CVT infinitely/continuously variable transmission
Most commonly found in a golf cart
also snowmobiles and UTVs
@@tmmtmm and go karts, Priuses, and sub-compact cars around the world lol
The @ViceGripGarage t-shirt was a nice touch too! :)
Di Resta & Pask TOGETHER !!!!!!!!!!!!! The Super Best \m/
Nice to see Corin there, 🇦🇺
Hey that’s me lol
What a great build!
💪🏼🤘🏼🙏🏼🙏🏼
@@jimmydiresta To be precise, this is a CVT transmission (Continuously Variable Transmission)
Great to see Neil and Corin!
I'm 44 y.o, owner and pre owned of some nice cars, but a cool go kart like this is still a childhood dream of mine.
The look on your face at the end Jimmy, bloody brilliant. Overgrown children across the world (myself included) are green with envy.
Corin and neil , what a team. Cheers 4 sharing sir.
Nice!!Love the Vice Grip Garage shirt
Diresta and pask? Love when these TH-cam juggernauts collab
Paskin and Corin in the house!
It was a fun few days!
Pask in the house! Best 2 makers on YT!
thank you !
Now you need to make a mini street cleaner to drive around the track and scrub it nice and clean for the races!
Fantastic build! Great way to break it in in Jimmy’s speedway. I see a whole new class of “retro” style model T cart races on the horizon.
Love seeing the lads from Australia here! (FWIW his full last name is Paskin, not just Pask.)
Sure, we'll just whip up a go-cart... sounds easy, right?
So many details!! At one point I said, this does NOT look sturdy... then Jimmy adds steel rod trusses and it becomes solid as a rock.
Very cool that some bona fide craftsman stopped by to lend a hand.
steering arms should point to center of rear axle, king pin should be angled so it points to center of spot where tire touches the ground. Also should have king pins rolled back a few degrees. Great cart and nice to see the others helping!! Thanks for the video Jimmy.
I was very pleased to see the details you have outlined, the geometry of the front axle/steering components will make a world of difference, good to see you have a simple explanation that is absolutely correct, 👍
Keep the wonderment of a child it is a beautiful thing to see such joy.
You might want to come up with a plan B for the wheels. This one's aren't meant to hold up to a sideload. They're meant to lean into corners.
If Neil is there, you know it gets done right and with some style!
I have a feeling there are some parades in that buggys future !! Nice work Jimmy.
Super fun build, love the jalopy look! I've been following Neil for a while now and love his work too. It's fun to see you both working on a project together. I've heard him talking about "my mate Corin" many times, so it's fun to finally see him in front of the camera. Thanks for sharing!
he has a better head for Radio, from someone who knows him....
Still can't get around the fact that you got Neil Paskin just casually joining your project. On a more general level I think the tools in a shop matters less than all the people either in the shop or along your maker journey. Great build!
That this was a group project makes it so much better! I loved the teaser shots of the trial run weaved into the build video. Thanks for sharing Jimmy!
Thanks so much for having us @Jimmydiresta What a great few days! Super pleased to have been able to contribute!
💪🏼💪🏼💪🏼🤘🏼🤘🏼🙏🏼🙏🏼🙏🏼
You did a lot of tig welding in this one!!! 💪💪💪 cant wait till Saturday we are gonna tear that track up!!!
❤❤❤
All of that, AND a Vice Grip Garage t-shirt?
Life is complete.
Cool build! I was surprised to see Neil at your shop. He's awesome! Reminds me of Popeye 😂
I see that Vise Grip Garage t-shirt, you sly devil.
This was awesome! I got a real "1950's Popular Mechanics Projects For Young Boys" vibe from this!
Beautiful, Jimmy! Amazing work!!! 😃
Unfortunately, Neil shouldn't be there anymore... But if he is, give him a hug for me!
Stay safe there with your family! 🖖😊
I can never get enough of your videos. I’ve been a fan for a very long time. I learned so much from your work. Thanks for always sharing your talents with us. I love making Halloween props so my favorite one is the first coffin build. Must have watched that 100 times lol
Wow, thank you!❤
My 2 favorite makers in the same video! Diresta and Pask!
@@jimmydirestastill have your track?? Got to do a huge go-cart event👍👍
@@mattgraham1983that's literally what this is for, haha
clutch is called a cvt [continuesly variable transmission]
Very cool
Some king pin inclination would help steering and tyres immensely!
What I like about Jimmy's videos: MOAR! fab, less talk!
That was a great build. I hope to make it up there one year, at least to see everyone else run.
Wow! What a fabulously exciting, swift & awesome build, everything coming together into a splendid & beautiful red race machine, the components competing with each other to take their station without delay as though in a racing pit stop, desperate for the track. Such a joy & delight to watch! Thank you for sharing!
What an awesome video! I love how you just jumped right in and put clips of it running as the intro. The kart looks amazing too! ... love you man!
You're such an inspiration Jimmy! Not only in making, but life in general. Watched a documentary on you last night on youtube and just wanted to thank you for the inspiration over the years. I've been watching since Hammered & Dirty Money and followed you along the years. From when I was a teen, now I'm 35. Now I'm working on getting my own land oasis's and have my work spaces in Northern California. Even though I have never met you in person, I can tell you're a genuinely cool dude and when I "grow up" (don't think we ever will) I want to be like you! Love your videos and wanted to say Thanks!
We loved being able to watch the full process of this build!
I was gonna say, you could've gone with smaller square section, but then i remembered, we're not that young and light anymore. :)) Great go-kart!
DiresCart! Cant wait to watch! Looks authentiek and solid. Thank You!
Winky's Workshop did a video series in October 2020. He made one of these and it's a two seater.
A little steampunk air this Kart 😍
Phileas Fogg would certainly have used it for his world tour.
Another superb achievement, thank you for this show Mr.
So good. All the skills with some great builders. Nice to see Pask Makes with Jimmy doing their thing. So good
English wheel 😮 this shop just gets cooler and cooler 😎
Catskill Customs ®️
The transmission you use is a VARIOMATIC, invented by Hub van Doorne, Eindhoven-The Netherlands in the ‘60th. It was first used in the DAF33 automobil, a funny little dutch familycar, my father owned one.
Loved the build and VGG teeshirt.
Three Kings! Great piece of work!
.... Woo hoo ... You finally made a go kart .. Awesomeness right there
Instead of using a CVT transmission it would be sick to upgrade it to a Shifter Kart because that classic feel would really complete this build, that and some proper scooter rims and tires
Amazing! Always the just about perfect ratio of exact versus eyeballed!
The technician and the artist all in one craftsman.
Always a treat to watch, always something valuable new to learn.
Also there might be scratch built go carts before but the 20s styling on this one is right on the money (expect perhaps the CVT and the disk brake, but again they both somehow don't seem to subtract from the style much if any)
Cvt. constantly variable transmission. found in every twist and go scooter world over. Pretty flawless design in fairness.
It's a like a CVT (centrifical variable timing) transmission
I thought that too.
Shop , Tool Heaven ! Enjoy the variety of projects !
Sick build so inspiration seeing pask and corin play there part to. Really showcases the versatility and use of every machine you have. Definately one of my favorites so far. 🔥🔥🔥🔥🔥
Literally drove the tyres off it. Awesome!
I think it’s a CVT, Constant Velocity Transmission. My Hybrid had one. (Pask Makes!!! Whoop!)
Ooh this will be the tide of the year!
Awesome job, Jimmy!
It's called a CVT "Continuous Variable Transmission" DAF made it 1958 for their passenger cars. Others have followed.
Nifty little thing. :)
DAF even used it in Formula 3, to good effect.
Had you ever built a go-kart from scratch before ??? Was awesome watching all of you working on the same project. My father used to build go-karts and mini-sprints and it's always been something on my bucket list of things to make.
It looks fantastic. A great match up for the great race. Let that monster cart with the snow mobile engine do its best to steal the show......alas...You'll be ready for him this year!
1924 Lives on!!!!
Great work jimmy and I love the vicegrip garage shirt!!
Pask is gonna need an English wheel now.
That has been said! :)
This looks incredible and I can’t wait to see it in the flesh! Even keeping up on Instagram there are so many more parts on this build that I thought were off the shelf components that you actually built from scratch. But besides that, the visual appeal of this thing is just off the charts. I didn’t think you could outdo last year’s build but it looks like you did🙌🏻
He burned the tires right off the rims! Great job Jimmy!
I love those old Flyers, great build...
Nice one..Lil Red reminds me of the Lil Rascles 🙌❤️
Cool cart Jimmy!- i need to learn how to weld ,so i can build my kids one!
I like it!! 😊!! Thank you!! Mic'2023
Hi @Jimmy my friend !Nice work man!Great job !Well done !Greeting Bulats Schmiede from germany (Bulat the Blacksmith)😊🤙
This would be so awesome. Great project.
@PaskMakes Glad you're having a good time in the US! I looked for you at Blade Show but never saw you :(
Progress since Friday! Looks good.
21:43 😎 ... edit: Vice Grip Garage!
Really cool. Thanks for the video. Stay safe.
That's what happens when a big kid meets big kids and together they build toys for big kids. 👍🤩
I absolutely love the way Australian and New Zealander metal workers pronounce the word "HEAT".....
Ah! I see that your entered colin furze vehicle build territory ? Just make it fly, and you have won 🤣 Great video and you grow better with age.
Love from Scotland 5* 😁
So now we need a race. Jimmy diresta vs. This old Tony. Would be epic
Its a go kart torque converter kit 😁
amazing build!!!👏👍
WOW! cool build and great video work!
The random velocity clutch is commonly known as a torque converter.
Hmm... I think it is a CVT, a Continuously Variable Transmission.
@@Scodiddly this, used in scooters and even some cars
@@kiiiisuand snowmobiles. There was also an Eastern European car called the DAF that used a pair of them (one on each rear wheel), and no differential.
@@Scodiddly this is it, this that kind of transmission
@@rcjbvermilion I believe Daf was the inventor of the CVT system.
Nice, but it looks like you forgot about Ackermann's steering geometry.
where is @thisoldtony when he’s needed…
It looks like it’s backwards, with the outside wheel steering more than the inside wheel!
No suspension, so Ackermannn does not count. Not needed.
Fun sponge…
Forget Ackerman, what about caster?
Hey Pask!
Great go cart Jimmey.
Hi mister Jimmy Diresta beautifully made beautiful job well done
Never to old to drive a go cart