I had my GT wing but wanted to bring it up to see better out the rear glass. Be careful buying these because I have seen 5 other companies selling crap brackets. So what I did was use my plasma cutter to make the supports taller. So a large piece of 3/8 aluminum, scan the original supports, keeping the general look then brings it up 3". Otherwise this is hands down the nicest wing design for this car.
I would've riveted the mounting points on, a lot easier than bolting them on. To unbolt the wing if necessary you could've done it by unmounting the legs from the flanges
+Chase McWilliams yeah but this is the first Rocket Bunny that I've been able to see up close.... plus it is boosted, which you rarely see. maybe you see bunny's frequently but i dont.
+Chase McWilliams ohhhh lmao gotcha. Oops.... But yeah believe it or not, he grew up on a farm with over 60 cattle, pigs and chickens. The 86 has a wide variety of owners ;)
I have a question to everyone that have widebody kits installed on their cars, if i install one of those, i have to buy wider wheels or something? To make the wheels come out from the sides of the car? I have that doubt
What's the spec on the GT wing? I've heard only boosted cars run it for better launch but I drive my FRS over 100Mph a lot and already get some play in the front end on the highway at speed. Does the GT wing lose you more grip up front? ... cause if it doesn't it's cool as shit!! So sick!
id love to have the wide body but the issue is that it's illegal to have the wide body in Australia because of the widening of the wheels :/. Only thing legal in the kit is the wing ahahaha.
I love your channel it's definitely refreshing! to see a unique personality in the TH-cam car community. I need to go unsubscribe to some channels I'll be back!to subscribe
+edgar leon technically it does have four seats, but the two rear seats are so small many people don't consider them real seats since it's hard to actually fit a person there.
You could move the front seats forward and you could definitely get people back there if you really wanted to. I own an frs and have gotten people back there, but it is definitely not comfortable for a long time
+Peter Alfonso that's enough yea. didn't see them on your video. I hate the small calipers in the rear. lol. like the focus RS Ford should it have gone brembo all around on the RS. btw how much power u making at the wheels ?
It looks good and all but Idk how people drive down the highway knowing you are in that. I think there is a point where you gotta step out of your childhood... but tastes are tastes. I would drive this on sundays
Bodybuilding and cars? These are my kind of people
you know it!
watch lowtek :) he is in to body building and has a evo and 350z great vids
Did you paint the drilled holes? Have fun when the rust shows up.
+Alejandro Ocasio he means on the car itself not the hardware :)
finnaly a video thats cool and instructive at the same time :)
Dude your music is always on point
Thanks man, I'm always on Soundcloud searching for good music 😉
Andrew Karam you must be gay.. this music is wack AF..
Now those tail lights need to go LOL
Had crystal eyes but they got water damage :(
i subbed cuz ur good at editing and nice quality, keep it up!
+SDBoards 55 thanks man! wont let you down ;)
I had my GT wing but wanted to bring it up to see better out the rear glass. Be careful buying these because I have seen 5 other companies selling crap brackets. So what I did was use my plasma cutter to make the supports taller. So a large piece of 3/8 aluminum, scan the original supports, keeping the general look then brings it up 3". Otherwise this is hands down the nicest wing design for this car.
where did u buy the wing from! cuz i need one for my genesis
Oh thanks for replying hover craft is like one of my pet peeves keep up the good work man!
I would've riveted the mounting points on, a lot easier than bolting them on. To unbolt the wing if necessary you could've done it by unmounting the legs from the flanges
+Arolbreaker He just wanted to keep the same hardware that the shop used on his fenders!
He looks like the typical rocket bunny frs bro
+Chase McWilliams yeah but this is the first Rocket Bunny that I've been able to see up close.... plus it is boosted, which you rarely see. maybe you see bunny's frequently but i dont.
+AMBush Drift i was talking about the owner lol
+Chase McWilliams ohhhh lmao gotcha. Oops.... But yeah believe it or not, he grew up on a farm with over 60 cattle, pigs and chickens. The 86 has a wide variety of owners ;)
ugly af?
Where did you buy the wing from? I didn't see a full carbon fiber one on the rocket bunny website
Did you guys paint the holes and where you used the Dremel?
no we did not. RUST INBOUND
Never seen a rocket bunny frs before is this a brand new kit , a new car
wheels don't really flush up even with the fenders. How wide are the wheels. Looks like a 25mm spacer too.
I thought the rocket bunny wing was fiberglass, where did you get a carbon fiber one?
Link to the whole 🚀🐰kit ?
Robert Ortiz someone answer this man's question! lol
just go on the greddy website. smh
Does the wing spoiler fit other cars or just for this car? With some modifications will it fit
Wing looks awesome just as wide as cake
where did u order this wing? i need one for my frs:)
I have a question to everyone that have widebody kits installed on their cars, if i install one of those, i have to buy wider wheels or something? To make the wheels come out from the sides of the car? I have that doubt
+Ricardo Adriazola Figueroa yes bigger wheels
Or wheel spacers :)
Get 50mm wheel spacers
What size diameter bolt did you use to mount the trunk mount and how many inches long?
where did u get the wing ? how much ?
What kind of rims are those? They look so nice!
+Thinh Pham They're Rays Gramlights 57extremes. Gorgeous wheels......
Nice work, looks like the brz in my nfs XD
running a little hover craft try using a half inch spacer or maybe 2 inch spacer to get that slight tire poke
+bryan hernandez Peter actually got a beefier spacer since this video was made!
I don't see any wheel weights on that wheel? Why aren't the wheels balanced?
What's the spec on the GT wing? I've heard only boosted cars run it for better launch but I drive my FRS over 100Mph a lot and already get some play in the front end on the highway at speed. Does the GT wing lose you more grip up front? ... cause if it doesn't it's cool as shit!! So sick!
+Streetsandpeaks go to a track.
+Hunter_Frs move west
+Streetsandpeaks get a front splitter and maybe some underbody airdams for front downforce and then the GT wing for the rear :)
Been thinking of buying a gt86, but then I see all these videos and I see the people that own them...
OGbrundle gt86, frs, brz are literally more common than civics, i see these shits everywhere
cholodude97 I’m assuming you walk everywhere, or own a rust bucket
Can I mount this spoiler In a toyota camry 2022??
You recon the car will look good without any bodykits except the V1 spoiler?
+Coskun Erdogan (Blusonic2321) ive always thought that the car needs widebody if you decide to run a big wing. thats just my opinion though!
id love to have the wide body but the issue is that it's illegal to have the wide body in Australia because of the widening of the wheels :/. Only thing legal in the kit is the wing ahahaha.
Im planning on getting a brz myself and also widebody it but how much deos the rocket bunny v2.0 cost
+christopher ceja i dont quite know for sure.... It is definitely not cheap though!
ik im late but where can i buy this at
wtf!! what camera are you using the quality is crazy!!
Sony FDR AX33 :)
Does he have a problem with speed bumps since it's so low
How did you patch the holes from the stock spoiler?
not sure about a huge gt wing on such a car...
will it do anything else but look good (to some)?
Downforce helps bolt down the rear axel good for heaps of power
how's the wing holding up , same wing gt500 carbon wing or rocket bunny wing flew off in the freeway going 80mph lol
+hondaracer84r6 it is holding up quite well :) no problems!
what material are brackets made of ? metal ?
putting a trailing will be required changing my lower control arm?
it's not required, just allows for more adjustability
Do you have to get a body kit to instal the wing or can you just put it on a stock frs
No u can put IT on stock
Can you give me the link to we’re I can buy the exact same wing one plz
What is the loudest and best sounding exhaust for a 3.8l v6 supercharged car?
+PonesBoys I dont know man, depends on the car! look up videos on TH-cam and see similar exhaust set ups and find what you like!
Is your frs supercharged or turbo? Link to kit?
does the trunk still open up?
yes it does :)
Where did you guys get the wing?
does anyone know where I can buy a wing that is exactly the same as the one in the video?
I love your channel it's definitely refreshing! to see a unique personality in the TH-cam car community. I need to go unsubscribe to some channels I'll be back!to subscribe
Thanks man! Made my day! :)
+AMBush Drift wait I'm 12 years old and my friend said the frs is 2 seats is it?
+edgar leon technically it does have four seats, but the two rear seats are so small many people don't consider them real seats since it's hard to actually fit a person there.
You cant make them big?
You could move the front seats forward and you could definitely get people back there if you really wanted to. I own an frs and have gotten people back there, but it is definitely not comfortable for a long time
Does anyone know where I can find this spoiler?
Yo dude how do you make your rear lights red? Do you just paint them or do you buy some red ones and install
them?
if you know what nightshade is its similar to that you spray it on like spray paint
+semour bums or its tinted idk
why you don't put to your car rocket bunny fenders
What’s the wheels fitment?
What is the name is this spoiler?
What type of websites did u get your rocket bunny kit from
i think ikons motosports sells it .
Does this wing work with a brz?
Why didnt you used nutserts??
Where did you order that wing?
next upgrade please big brakes. front and back.
I have the STI brembos up front, they helped a ton!
+Peter Alfonso that's enough yea. didn't see them on your video. I hate the small calipers in the rear. lol. like the focus RS Ford should it have gone brembo all around on the RS. btw how much power u making at the wheels ?
I'm going to UCF in the fall! Btw love the car
thanks man! see you around then!
I love that frs
Where did you buy it? Have any links? Does it fot on a Toyota GT86?
It does
aliexpress.
Nonstopper™ lmao
Thats how i want my car to be
whats the wheel fitment on the rocket bunny?
+BruceWillis generally. on 18's, its very good but with these dudes running 19's its not great but looks livable
MULTIBASHUR 1999 thanks man
19x9.5 up front 19x10 rear. no rubbing now but will need control arms, trailing arms, and toe arms to get it dialed in
Peter Alfonso thanks
wait... this is the same car you are driving today?
Car looks nice.
What part of Florida you live in? Would love to spot this car
+Iconic S1ider Oviedo, FL! ;)
you look like rico (moises arias) from hannah montana
haha i used to get that all the time growing up!
beast
WHERE HE GET THE KONEY FOR THOSE CARS PLEASE SOMEONE TELL ME
try thmotorsports, usually has everything lol
Were can you buy the Gt wing
Rocket bunny website
he has good hair lowkey
what type of reverse camara do you have?
+Mario Sanchez reverse camera? haha what do you mean?
on 3:48 on the licence plate
+Mario Sanchez beatsonic
Why didn't you just use rivets?
Because it wouldn't have matched any of the stainless Phillips head bolts that the rest of the kit has
What brand of wing is this?
Rocket bunny
is it a replica rocket bunny kit?
Nope it's legit :)
god i wish my frs could look like thay
+DiamondSupply one day ;)
Nice fitment
Cover that hole up...don't want water getting in the lid. 6:01
dope car
+hondaracer84r6 for sure!
why didnt you just use Stainless 5mm pop rivets? instead of pissing around with nut and bolt
bc we r stupid lol
is that yours
sweet cars
+Burd's View for sure.... ill have a garage like that one day, filled with drift cars ;)
Drift and rally cars is the dream!
that's the hardway to install it
+John Manza what is the easy way? 3m tape? lol ;)
+AMBush Drift hahaha 3m tape? it will come off if you drive fast. why don't u use rivnut?
Is that realrocket bunny. Rocket bunny has greddy logo laser cut out of the winglet pretty sure. Hmmmm
Lex?
All he needs is a set of helix taillights
It looks good and all but Idk how people drive down the highway knowing you are in that. I think there is a point where you gotta step out of your childhood... but tastes are tastes.
I would drive this on sundays
+Ahmet T it isnt his daily, he daily's a 350z :) technically it is his sunday car too
oh then damn nice
That wing is the most ridiculous thing I have ever seen
noice one m8
you have two frz
nice vid
have fun with the rost
To be honest this was kind of nerve racking to watch, one screw up and such an amazing car would be flawed.
nervous AF! LOL
Take off the exhaust silencer it doesn't look good with it
think you just gained a sub :)
+AngryLemonHD thanks my man! ;)
New sub
+Tim Janda thanks man ;) lots of cool videos planned!
i love sweatpants 😜
he could have removed the spacers
Don't like your exhaust tip bro
+Hugo Gomez It's a silencer, and I dont like it either :(
+AMBush Drift true, but still great work man! Keep it up