Dear sir, you are THE only person on the internet who actually reviewed this case for real. Even better than the manufacturer, and every other reviewer. The fact that you revealed that it can take a microATX mobo is such a saver. I wouldn't have bought it if it wasn't for you! Thanks a million ❤
@@DouglasWhitcomb Not anmoying at all. In fact, my friends were shocked how quite it is compared to other gaming PCs. Now I don't have a decibel meter gadget to measure noise levels. But trust me, there's plenty of room for air to move around, and plenty of fan mounting options on that case. I have Sapphire Nitro 7900 XTX (HUGE CARD).... I live in Dubai, so ambient temperature is never less than 23.5 - 26 C, and the fans, under immense load stress tests can be audible (around 60-80% fan speed) & (around 40- 45% fan speed under gaming).
@@mahmoodtahoon1335hey, I’m gonna buy this case, but don’t know, which motherboard I need. Are you using micro atx motherboard? Do you have any problems with it?
@@mahmoodtahoon1335what's your motherboard? I'd like to mount with a micro atx and and Asus tuf7900xtx, bigger than your sapphire. Do you still have other space for bigger card or you Is at ita limits ? Problema with micro atx and cable management (front panel USB , audio, fans etc..)?
@@markotto1767 Hi Mark. My mobo is ASUS TUF Gaming B550-PLUS WiFi II. As for your GPU, it is indeed bigger than mine. I don't have the exact measurements now, as I'm away on vacation. But I can tell you that my card is barely in, and I think (but please check for yourself) that a bigger card might come in contact with the case from the mesh filter side, or even from the mobo side. Again, my card is barely in. If the Asus 7900 xtx is a few centimeters thicker, then I wouldn't recommend it. There is no problem whatsoever with my microatx board, not cable management, nothing. Except that my specific board doesn't have an extra header for the USB type C found on the top of the case. So that's the only port that I couldn't connect, the other front panels USBs are working. A final thing is, if you plan to use any SATA ports, you have to get a 90 degree cable, or else it won't fit because the sata headers are under the GPU and your cables will be cramped.
Love this case can you mount a 280 AIO And still put 120mm fans top & bottom? My mAtx fits great. I ordered phanteks glacier one. Wish D30 fans and I have some T30 with halo lux RGB rings on top of the T30!
I've been thinking of this case for a while, I have a matx motherboard and a big gpu. I wanted something a big different that the usual corsair 4000d I have at the moment. The combo of 343mm gpu and matx has made my choice of cases quite limited as I wanted something small ish but different. This sort of literal vertical gpu, seems to be a good answer.
It looks far better with a Micro ATX borard inside. And I wish they did sell the green cases, as I thought they looked the best. I'd go with air cooling for simplicity sake. That they installed the top fan wrong I hope is a sign of getting a preview unit out and not what we should expect retail
thank you. I'm now convinced to get this for my next build. always looking for something vertical instead of the usual horizontal orientation. the best thing about this case is that 80% is perforated.
You can move the top fan to the outside of the case to give more room for the AIO cooler. I also recommend using the top fan as an intake due to the unremovable dust filter, and using the AIO fans as an exhaust to cut down on warm air entering the case. Plus the side filter can be removed to prevent dust building up and obstructing airflow. I did this for my Z11 case and it improved cooling by several degrees, especially for the chipset thermals. Additionally, you can install low profile fans at the rear to cool your HDDs.
No offence Leo, the award is well deserved. One thing I would like to have seen in this review was if there was anyway to tidy the cables coming out of the rear io panel. I'm guessing there isn't, as you didn't mention it. Still, it would be nice to have something there for that. Great review as ever. Thanks
thanks. they should another top panel with a cut out that makes the MB and GPU ports easily accessible. it'll be great for if this case is put on the floor.
You are the G. O. M and the G. O. A. T in this space, Leo. I for one appreciate that Thermaltake appreciate you. I think Thermaltake are doubling down on NOT being the Thermaltake of old when half-arsed was practically their middlename. This is an M-ATX case and a pretty good one, but rather than over-selling, they'd rather err on caution. Missed a trick not launching it in BRG just for us though. I'm a bit of a sucker for British Racing Green and would have made it the only British SKU on launch; but that is just me.
TT loves Leo. Id love to see one of the coloured ones, like the green one from your Computex coverage. white is a bit meh for me now, everyone is doing it.
nicely done - its a pretty good looking case - are you sure those holes on the rear panels are for fans they never decided to use? looks that way to me.... good spot
I quite often transport my PC to a mates house about 30 minutes away. Travels on a thick folded blanket, lying on its rear to minimize gpu north-south movement. I still worry about the pcie slot, and the addition to this new case seems pretty useful.
but i saw that Leo pull off the bracket of retention of the gpu. I travel like you and this system to avoid vibration during transport it's great , and the gpu vertical also avoid sagging. Why this bracket it's been removed ? Is there a maximum thickness ?
Nice review! Seems like a decent product, not for me (I prefer larger cases) but seems good for what it is, and of course nice to see continued innovation in case design.
I agree with other people, I was hoping for a coloured version, they looked brilliant in your computex coverage- are they coming later? when can you buy one?
Excellent and comprehensive. Thank you, Leo. You wondered about the GPU clamp: people who take their PCs to LAN meets will love that as will those who put their PCs on display in stalls. With regards to motherboards, do you have any observations on DTX motherboards in this case? You also said you preferred the green models, so how about showing us how to spray-paint it green? Perhaps one for James?
well thats the best thumbnail of Leo ive seen forever. the case isnt bad either. Id like to see one of the coloured ones, or all of them in a video to make a good choice - i think the finishing wasnt production grade f rom computex. I want to see how good they look as retail samples here.
Can't wait for one of the green ones. I have a black tower 100, but would love to run a micro atx with a slimmer gpu to access the other pci express slot for a capture card.
Actually a standard mATX board will fit the case even without removing the GPU clamp although it may obstruct the front panel USB/SATA ports on some boards (like in my case so I had to remove it anyway).
Great review! KitGuru. But you did not place a fan over the power supply cover? The assembly diagram show it fits 120mm or 140mm for sure. Better airflow better temps since it's pulling the air for the vented bottom portion of the case.
First, the 280mm cooler takes up a lot of the space in that area but second, and more importantly, this is a review of a case and Thermaltake doesn't include a fan in that position so yes there are options however they are not part of the package you buy. Leo
I was expecting thermaltake to send leo one in his preferred british racing green colours. still, the white is quite pretty. I like the layout and some of the tool less design choices are certainly a step in the right direction
I loved building in it. I did a mini ITX board. I did have to modify the case AIO radiator bracket to clear the massive Kraken Elite 240 pump, (which BARELY clears the ram). I posted a short of the completed build.
i bought the tower 500 and i so so love it man is it a beast,. i like showing off my main board the gpu and ram and these towers are perfect for showing off ur investment im so proud of my machine hopefully it wont turn on me someday AI is coming folks and its coming for humans however im not a human
This case just makes a lot of sense, good cooling performance, great compatibility, quite compact for MATX and looks cool. I considered the tower 100 when I built my system last time but it was way too big for an ITX case but this as an MATX case is perfect. This is probably my next case
I'm loving that matcha green version, and great to know it'll take a 4090 and a MicroATX. All the panels being easy access for dust filter cleaning is exactly the kind of feature I appreciate, only downside is the rear IO being in less convenient location, but that I can deal with, especially with a USB hub.
Can someone explain something that might be very obvious 😂 How do you connect display port/HDMI leads to the the GPU when the ports are facing the top? Perhaps i am missing something very obvious here but couldn't see how 🤔
There is space under the top cover and above the rear IO and graphics card. Cables came out going upwards and then bend 90 degrees to the rear and exit through the cut-outs you see at various points in the video when I have the top cover removed. Leo
Just finished bulding my PC using this case. Yes, it will support MATX motherboards but you may have to remove some of the features of the Tower 200 to make it fit. In my case, I had to remove the GPU support bracket to get acces to my motherboard's USB3 header and SATA connections. Same reason I couldn't use the under GPU plate so I have a huge hole there. I'll have to cut that plate at some point. Other than that, I love this case. Incredible airflow. Looks stunning with RGB.
3:44 I think this feature may have had classic lan parties in mind, but i've been looking for a case with a handle on it for an eternity to replace my Apevia XQPACK2
Great case, looking forward to build my next PC in this case. Screen is gimmick and to expensive, you can generally put in bigger screen on empty spot under MB. Since case is so easy to work with (take apart) and no rubber parts it can be easily painted any color you wish (even with a spray can) so green ones ain`t anything special. Love the glass is only on front, makes much more sense to have perforated sides for airflow. The only thing I see as "problematic" is top connectors, but I guess longer cables from keyboard, mouse, graphic card could finally prove useful (with few zip ties) to secure them to the back of the case. Great review, and for once Great case from TT...cheers!!!
To me, as soon as you're adding a high end GPU then the ITX form factor doesn't make sense anyway. The ITX form factor should be for low to midrange CPUs and quiet, tucked away DIY builds - if you want a portable fire-breather then the size of your GPU/PSU is going to mean mATX makes more sense anyway.
It's great that the case I was interested in can use M-ATX as well. I'd love to build something cheap and stylish around the B650M-HDV/M.2or B650MPRO RS What kind of M/B would someone watching this video put in it? Thanks for the great review!
I have pre ordered the case, it was due on the 30th of June and then the 12th of July and now its been delayed until the 1st of August so fingers crossed lol
thank you for showing me how to access the motherboard ports ... I just thought about that and I was so confused because no body else have shown that ... but I may be able to do some custom ports at the back of the case for it...
i am looking to get this case. was wondering if you can fit the additional fan on the power cover with a 280mm radiator installed and if there is enough space between the bottom of the power cover and PSU to accomodate a fan in the even the 280mm radiator setup do not allow the fan to be fitted on top.
Would be nice if a maker of power supplies who also make the case, would provide power supply cables appropriately sized for their own case size. Thermaltake and Corsair, something to think about when making smaller cases.
Does the Thermaltake RGB software need to auto-run on boot and be running in the background for the LCD screen to display properly, or can you set it once and forget it?
Im still using a old termaltake smarth 750 watt that been in so mutch pc i dont even know how old this is but it still running great my i9 9900k and RTX 3070
Got me at "we installed mATX in mini ITX case". mATX MB are versatile and easy to build while also having best prices. And this case is much too big for perfect ITX anyway. Also the concept per se reminds me a lot of ASUS Prime 201 (Jonsbo D31) just rotated.
Hi, I have a Tower 100 Racing Green, I put inside a 3x BeQuiet Silent Wings 4 140 (top,down,back) 1100rpm 13.6dB , also got light wings 140 RGB x2 (bottom+top on AIO water Loop 120) for visual purpose. And it's for me not bad, quiet, but I wondering could You recommend other brand. The problem is not with sound of wings because they dead silent but the motor in my opinion is not so great. Is it maybe noctua or thermaltake do more quiet motor? or Corsair magnetic? or just only fluid only motor could be solution. Thank You superb review, hard for me to decide is it 100 odr 200 better. 200 looks like better to keep cooler temps but the side panel is a bit heavy, better looks that glass in 100 model. Thank You once again for review.
Many cards the RGB on the gpu is on the right side and will be obscured like your example. That's a big oversight. they should have planned for it to be installed the other way.
Find it hard to believe nobody has commented yet ... What a great review Leo. Just need you guys to do a Collab with Tom from @OC3D that'd be incredible
@@bobsmithson8592 The tiniest one is still going, go show show him some love, the guy has been through a lot in recent years and is still cranking out top tier articles and videos
I wonder if it will fit the Micro-ATX MSI MAG B760M MORTAR MAX WIFI motherboard? In addition, it would be nice if you could install 360 AIO and a mesh front panel
i think the main reason not to use matx board is the connectors on the bottom like usb ones. they look ugly there and cables partially block gpu fans. when it's itx - connectors are near the ram and thus when installed are in the bottom of the case and do not block anything. i'll stick to itx. but thanks for review. it's the only one really helpful.
Won't the cooling be very poor in this PC because of negative air flow? There's only 1 fan for intake (behind the case) and 3 fans for exhaust (1 on the top of the case and 2 on the side mounted radiator radiator) so there's negative pressure. How is this solved?
I never knew leo had a cat- its lovely. Oh yes, and side comment, great review ! Im pretty much sold on this with a new motherboard for later in the year. but I want a coloured version, when are they out? white is so 2022.
Ive been running this case for couple years now for my Ryzen 7 and 3070 setup. I upgraded the fans to Noctua industrials and its cool inside and keeps itself very clean. Very happy with it.
@@themissinglink9729 yep I guess the point I want to make is the impressive dust filtration on mine with real world use. Presumably this is better again.
Thank you for the review - I have one question / concern: When using the mATX - does the graphics card (4080) block any of the I/O inputs (USB3, USB-C, power/reset switch)? Thank you.
I am curious to hear from anyone that has completed a build with this case, what GPUs do NOT work in the vertical orientation, causing high temp issues, and what GPUs do work.
This case has almost all I want in a MATX case with to me a downside is on All their tower cases which are for use on the desktop is the I/O being on Top instead of the Bottom for easy access. This case is the best out of all the tower cases 100,200,300 and 500 because it actually has proper air flow in the side panels. The Tower 300 looks nice but wish it had better sides for air flow and the same with the 500. The Tower 500 would be my case chose to Mod. for ATX to the style of the Thermaltake Divider 200 which has a lot of problems with air flow but the close size abd NEEDS to get rid of the low air flow front TTTTTTTTTT and make both sides High air flow.
The only criticism I have for them? Is they should have made the bottom pass through the same size as the one with the grommet so you could move it down and use it with an mAtx build.
Dear sir, you are THE only person on the internet who actually reviewed this case for real. Even better than the manufacturer, and every other reviewer.
The fact that you revealed that it can take a microATX mobo is such a saver. I wouldn't have bought it if it wasn't for you!
Thanks a million ❤
In all honesty, how noisy does it get under load?
@@DouglasWhitcomb Not anmoying at all. In fact, my friends were shocked how quite it is compared to other gaming PCs. Now I don't have a decibel meter gadget to measure noise levels. But trust me, there's plenty of room for air to move around, and plenty of fan mounting options on that case. I have Sapphire Nitro 7900 XTX (HUGE CARD).... I live in Dubai, so ambient temperature is never less than 23.5 - 26 C, and the fans, under immense load stress tests can be audible (around 60-80% fan speed) & (around 40- 45% fan speed under gaming).
@@mahmoodtahoon1335hey, I’m gonna buy this case, but don’t know, which motherboard I need. Are you using micro atx motherboard? Do you have any problems with it?
@@mahmoodtahoon1335what's your motherboard? I'd like to mount with a micro atx and and Asus tuf7900xtx, bigger than your sapphire. Do you still have other space for bigger card or you Is at ita limits ? Problema with micro atx and cable management (front panel USB , audio, fans etc..)?
@@markotto1767 Hi Mark. My mobo is ASUS TUF Gaming B550-PLUS WiFi II. As for your GPU, it is indeed bigger than mine. I don't have the exact measurements now, as I'm away on vacation. But I can tell you that my card is barely in, and I think (but please check for yourself) that a bigger card might come in contact with the case from the mesh filter side, or even from the mobo side. Again, my card is barely in. If the Asus 7900 xtx is a few centimeters thicker, then I wouldn't recommend it.
There is no problem whatsoever with my microatx board, not cable management, nothing. Except that my specific board doesn't have an extra header for the USB type C found on the top of the case. So that's the only port that I couldn't connect, the other front panels USBs are working.
A final thing is, if you plan to use any SATA ports, you have to get a 90 degree cable, or else it won't fit because the sata headers are under the GPU and your cables will be cramped.
TT are a cool company in the last year, they used to be SO serious and very out of touch - the fact they do all this is very cool
Excellent analysis of this case. Here and GN are clearly the authority for case reviews.
Love this case can you mount a 280 AIO And still put 120mm fans top & bottom? My mAtx fits great. I ordered phanteks glacier one. Wish D30 fans and I have some T30 with halo lux RGB rings on top of the T30!
That award is well deserved. Such a detailed, clear and structured case review is rarely found anywhere on the interwebs. Thank you very much.
Much appreciated!
I've been thinking of this case for a while, I have a matx motherboard and a big gpu. I wanted something a big different that the usual corsair 4000d I have at the moment. The combo of 343mm gpu and matx has made my choice of cases quite limited as I wanted something small ish but different. This sort of literal vertical gpu, seems to be a good answer.
It looks far better with a Micro ATX borard inside. And I wish they did sell the green cases, as I thought they looked the best. I'd go with air cooling for simplicity sake. That they installed the top fan wrong I hope is a sign of getting a preview unit out and not what we should expect retail
thank you. I'm now convinced to get this for my next build. always looking for something vertical instead of the usual horizontal orientation. the best thing about this case is that 80% is perforated.
I’ve got to 100 and I love it but when I upgraded am4>>am5 that itx limitation made my wallet cry! This seems a good step on with the matx support!
The build bits of these vids are amazing because you literally get to pick the best possible parts on the market for the build.
You can move the top fan to the outside of the case to give more room for the AIO cooler. I also recommend using the top fan as an intake due to the unremovable dust filter, and using the AIO fans as an exhaust to cut down on warm air entering the case. Plus the side filter can be removed to prevent dust building up and obstructing airflow. I did this for my Z11 case and it improved cooling by several degrees, especially for the chipset thermals. Additionally, you can install low profile fans at the rear to cool your HDDs.
No offence Leo, the award is well deserved.
One thing I would like to have seen in this review was if there was anyway to tidy the cables coming out of the rear io panel.
I'm guessing there isn't, as you didn't mention it.
Still, it would be nice to have something there for that.
Great review as ever.
Thanks
I like how Leo builds like average PC builder: pulling and pushing
I am incredibly average.
Leo
thanks. they should another top panel with a cut out that makes the MB and GPU ports easily accessible. it'll be great for if this case is put on the floor.
You are the G. O. M and the G. O. A. T in this space, Leo. I for one appreciate that Thermaltake appreciate you. I think Thermaltake are doubling down on NOT being the Thermaltake of old when half-arsed was practically their middlename. This is an M-ATX case and a pretty good one, but rather than over-selling, they'd rather err on caution. Missed a trick not launching it in BRG just for us though. I'm a bit of a sucker for British Racing Green and would have made it the only British SKU on launch; but that is just me.
TT loves Leo. Id love to see one of the coloured ones, like the green one from your Computex coverage. white is a bit meh for me now, everyone is doing it.
Thank you. This is at the top of my list for a new case. You confirming it supports Matx really makes me want one.
as someone who still has a 1080, the size difference between that and the new cards is insane!
nicely done - its a pretty good looking case - are you sure those holes on the rear panels are for fans they never decided to use? looks that way to me.... good spot
I quite often transport my PC to a mates house about 30 minutes away. Travels on a thick folded blanket, lying on its rear to minimize gpu north-south movement. I still worry about the pcie slot, and the addition to this new case seems pretty useful.
but i saw that Leo pull off the bracket of retention of the gpu. I travel like you and this system to avoid vibration during transport it's great , and the gpu vertical also avoid sagging. Why this bracket it's been removed ? Is there a maximum thickness ?
@@markotto1767 He removed the GPU bracket to fit a M-ATX board instead of the mini-ITX one.
Nice review! Seems like a decent product, not for me (I prefer larger cases) but seems good for what it is, and of course nice to see continued innovation in case design.
I agree with other people, I was hoping for a coloured version, they looked brilliant in your computex coverage- are they coming later? when can you buy one?
They will be released soon
Excellent and comprehensive. Thank you, Leo. You wondered about the GPU clamp: people who take their PCs to LAN meets will love that as will those who put their PCs on display in stalls.
With regards to motherboards, do you have any observations on DTX motherboards in this case?
You also said you preferred the green models, so how about showing us how to spray-paint it green? Perhaps one for James?
I guess DTX would fit nicely however I haven't thought much about that form factor in ages
Leo
well thats the best thumbnail of Leo ive seen forever. the case isnt bad either. Id like to see one of the coloured ones, or all of them in a video to make a good choice - i think the finishing wasnt production grade f rom computex. I want to see how good they look as retail samples here.
Can't wait for one of the green ones. I have a black tower 100, but would love to run a micro atx with a slimmer gpu to access the other pci express slot for a capture card.
Actually a standard mATX board will fit the case even without removing the GPU clamp although it may obstruct the front panel USB/SATA ports on some boards (like in my case so I had to remove it anyway).
Halfway through the video....stillllllllllll very confused why this is a mini-itx case and not a micro-atx case.
Finished the video.....In theory some MATX motherboards may not fit I guess???
@@Starscreamious Yup, seems that way, It's odd but in a good way
Leo
@@KitGuruTech I might buy the blue one. I've had my old case for over 10 years now.
@@Starscreamiouswaiting on mine to get here on Thursday
This case does support mATX, it's just not listed on the specs. I just used it to build with one
Great review! KitGuru. But you did not place a fan over the power supply cover? The assembly diagram show it fits 120mm or 140mm for sure. Better airflow better temps since it's pulling the air for the vented bottom portion of the case.
First, the 280mm cooler takes up a lot of the space in that area but second, and more importantly, this is a review of a case and Thermaltake doesn't include a fan in that position so yes there are options however they are not part of the package you buy.
Leo
I was expecting thermaltake to send leo one in his preferred british racing green colours. still, the white is quite pretty. I like the layout and some of the tool less design choices are certainly a step in the right direction
I loved building in it. I did a mini ITX board. I did have to modify the case AIO radiator bracket to clear the massive Kraken Elite 240 pump, (which BARELY clears the ram). I posted a short of the completed build.
Are you getting any of the coloured versions to review? id like a follow up look at all the colours Leo. talk to your mate Kenny for us.
i bought the tower 500 and i so so love it man is it a beast,. i like showing off my main board the gpu and ram and these towers are perfect for showing off ur investment im so proud of my machine hopefully it wont turn on me someday AI is coming folks and its coming for humans however im not a human
Very tempted to get one in matcha green, pretty unique color.
Great review Leo. I really appreciate the attention to detail.
This case just makes a lot of sense, good cooling performance, great compatibility, quite compact for MATX and looks cool. I considered the tower 100 when I built my system last time but it was way too big for an ITX case but this as an MATX case is perfect. This is probably my next case
Thinking of putting a MSI B550 Pro-VC in one. Wondering if it’ll fit 😅
I'm loving that matcha green version, and great to know it'll take a 4090 and a MicroATX.
All the panels being easy access for dust filter cleaning is exactly the kind of feature I appreciate, only downside is the rear IO being in less convenient location, but that I can deal with, especially with a USB hub.
you going to buy one?
Can someone explain something that might be very obvious 😂 How do you connect display port/HDMI leads to the the GPU when the ports are facing the top? Perhaps i am missing something very obvious here but couldn't see how 🤔
There is space under the top cover and above the rear IO and graphics card. Cables came out going upwards and then bend 90 degrees to the rear and exit through the cut-outs you see at various points in the video when I have the top cover removed.
Leo
Would something like the powercolor Red devil RX7900XT fit inside?
Just finished bulding my PC using this case. Yes, it will support MATX motherboards but you may have to remove some of the features of the Tower 200 to make it fit. In my case, I had to remove the GPU support bracket to get acces to my motherboard's USB3 header and SATA connections. Same reason I couldn't use the under GPU plate so I have a huge hole there. I'll have to cut that plate at some point.
Other than that, I love this case. Incredible airflow. Looks stunning with RGB.
In all honesty, how loud does it get under load?
3:44 I think this feature may have had classic lan parties in mind, but i've been looking for a case with a handle on it for an eternity to replace my Apevia XQPACK2
Great case, looking forward to build my next PC in this case. Screen is gimmick and to expensive, you can generally put in bigger screen on empty spot under MB. Since case is so easy to work with (take apart) and no rubber parts it can be easily painted any color you wish (even with a spray can) so green ones ain`t anything special. Love the glass is only on front, makes much more sense to have perforated sides for airflow. The only thing I see as "problematic" is top connectors, but I guess longer cables from keyboard, mouse, graphic card could finally prove useful (with few zip ties) to secure them to the back of the case. Great review, and for once Great case from TT...cheers!!!
To me, as soon as you're adding a high end GPU then the ITX form factor doesn't make sense anyway. The ITX form factor should be for low to midrange CPUs and quiet, tucked away DIY builds - if you want a portable fire-breather then the size of your GPU/PSU is going to mean mATX makes more sense anyway.
It's great that the case I was interested in can use M-ATX as well.
I'd love to build something cheap and stylish around the B650M-HDV/M.2or B650MPRO RS
What kind of M/B would someone watching this video put in it?
Thanks for the great review!
I have pre ordered the case, it was due on the 30th of June and then the 12th of July and now its been delayed until the 1st of August so fingers crossed lol
This review is what sold this case for me. Ive watched multiple times while i wait for it to be delivered. Thank you for such a thorough review!
My pleasure!
thank you for showing me how to access the motherboard ports ... I just thought about that and I was so confused because no body else have shown that ... but I may be able to do some custom ports at the back of the case for it...
Hope it helped !
@KitGuruTech well definatly not what I would like especially since I am changing cables daily but I can think of workarounds
A gift should be received with the same humility and grace to match the gifter.
Will Strix 4090 will fit on the case?
i am looking to get this case. was wondering if you can fit the additional fan on the power cover with a 280mm radiator installed and if there is enough space between the bottom of the power cover and PSU to accomodate a fan in the even the 280mm radiator setup do not allow the fan to be fitted on top.
Would be nice if a maker of power supplies who also make the case, would provide power supply cables appropriately sized for their own case size. Thermaltake and Corsair, something to think about when making smaller cases.
The tower theme is an interesting one and keeps continuity across the range.
Nice that it supports MATX, i have been looking for a compact MATX case, its a shame it looks like a 3D printer/terrarium.
Cyberpunk leo - we need this made into a 12 inch collectable and posable model toy.
I have a tower 100 at them moment but I’m thinking of getting the 200 just so I can use a 280mm aio
Does the Thermaltake RGB software need to auto-run on boot and be running in the background for the LCD screen to display properly, or can you set it once and forget it?
Compatible with M-ATX boards that got Back-Connectors?
Im still using a old termaltake smarth 750 watt that been in so mutch pc i dont even know how old this is but it still running great my i9 9900k and RTX 3070
awesome Leo is back on form after computex ! what a cool thing for thermaltake to offer
I think I won't find another video with this amount of information on a case review. Truly amazing, I have to subscribe.
Got me at "we installed mATX in mini ITX case". mATX MB are versatile and easy to build while also having best prices. And this case is much too big for perfect ITX anyway.
Also the concept per se reminds me a lot of ASUS Prime 201 (Jonsbo D31) just rotated.
I've been wanting to get this case and this is by far the best review i've seen. Truly amazing
Is it possible to fit a 140mm fan under the power cover instead on top of it? What is the clearance between that cover and the PSU?
In all honesty, how loud does it get under load? Would you say it is quiet or is it not acceptably quiet?
Hi, I have a Tower 100 Racing Green, I put inside a 3x BeQuiet Silent Wings 4 140 (top,down,back) 1100rpm 13.6dB , also got light wings 140 RGB x2 (bottom+top on AIO water Loop 120) for visual purpose. And it's for me not bad, quiet, but I wondering could You recommend other brand. The problem is not with sound of wings because they dead silent but the motor in my opinion is not so great. Is it maybe noctua or thermaltake do more quiet motor? or Corsair magnetic? or just only fluid only motor could be solution. Thank You superb review, hard for me to decide is it 100 odr 200 better. 200 looks like better to keep cooler temps but the side panel is a bit heavy, better looks that glass in 100 model. Thank You once again for review.
Many cards the RGB on the gpu is on the right side and will be obscured like your example. That's a big oversight. they should have planned for it to be installed the other way.
Hi, how about the material quality, especially the sidepanels?
Is the crystal clear or dark? Because i have a tower 100 with dark glass. And i want the same on the 200
these cases are pretty good value now. definitely contemplating this for my 600mm deep desk
That forest green case, I need it now!
I went out and bought an itx mobo in preparation for this case, come to find out it can house matx and that’s what I had to begin with!
Find it hard to believe nobody has commented yet ... What a great review Leo. Just need you guys to do a Collab with Tom from @OC3D that'd be incredible
is he still going? havent been there in ages.
@@bobsmithson8592 The tiniest one is still going, go show show him some love, the guy has been through a lot in recent years and is still cranking out top tier articles and videos
I wonder if it will fit the Micro-ATX MSI MAG B760M MORTAR MAX WIFI motherboard? In addition, it would be nice if you could install 360 AIO and a mesh front panel
This would be great case for mini-dtx.
i think the main reason not to use matx board is the connectors on the bottom like usb ones. they look ugly there and cables partially block gpu fans. when it's itx - connectors are near the ram and thus when installed are in the bottom of the case and do not block anything. i'll stick to itx. but thanks for review. it's the only one really helpful.
Quick question, would you be able to fit an m-atx board in the tower 100 as well then? Great vid
Won't the cooling be very poor in this PC because of negative air flow? There's only 1 fan for intake (behind the case) and 3 fans for exhaust (1 on the top of the case and 2 on the side mounted radiator radiator) so there's negative pressure. How is this solved?
I never knew leo had a cat- its lovely. Oh yes, and side comment, great review ! Im pretty much sold on this with a new motherboard for later in the year. but I want a coloured version, when are they out? white is so 2022.
Can you get the coloured ones Leo and do a roundup? id love to see the options in 4K in glorious Kitguru video
I second that. want to see them all
this is what I've been looking for, planning to build this out with a Matx/4090 and am5 7950....hopefully the thermals are okay
Could you air cool the CPU with a moderately sized tower cooler and install a GPU with an AIO attached?
Ive been running this case for couple years now for my Ryzen 7 and 3070 setup. I upgraded the fans to Noctua industrials and its cool inside and keeps itself very clean. Very happy with it.
This is the sequel to the tower 100. It was just released
@@themissinglink9729 yep I guess the point I want to make is the impressive dust filtration on mine with real world use. Presumably this is better again.
how can you run a case that just came out? why lie?
Thank you for the review - I have one question / concern: When using the mATX - does the graphics card (4080) block any of the I/O inputs (USB3, USB-C, power/reset switch)? Thank you.
Tower 200 like the 100, the FRONT I/O cables run above in the top & run down the rear of case, no blocking😀
I am curious to hear from anyone that has completed a build with this case, what GPUs do NOT work in the vertical orientation, causing high temp issues, and what GPUs do work.
Shame Leo didnt get to do a build in the british racing green case.
oh Micro ATX board in a Mini-ITX case is TIGHT!!!!
This case has almost all I want in a MATX case with to me a downside is on All their tower cases which are for use on the desktop is the I/O being on Top instead of the Bottom for easy access. This case is the best out of all the tower cases 100,200,300 and 500 because it actually has proper air flow in the side panels. The Tower 300 looks nice but wish it had better sides for air flow and the same with the 500. The Tower 500 would be my case chose to Mod. for ATX to the style of the Thermaltake Divider 200 which has a lot of problems with air flow but the close size abd NEEDS to get rid of the low air flow front TTTTTTTTTT and make both sides High air flow.
I am really interested in this case.
I wish this case could fir arctic 280 with a micro board but it doesn't look like there will be clearance for the radiator.
The only criticism I have for them? Is they should have made the bottom pass through the same size as the one with the grommet so you could move it down and use it with an mAtx build.
At first I was like, "no way these cases are that heavy".
It really looks like a 3d printer, It would be great to have this beside a 3d printer.
should've been marketed as m-ATX indeed. there's so much awkward space on the bottom if you're using a mini-ITX
Will a 3.8 slot gpu fit this case? I'm thinking of buying Galax RTX 4090 SG
What the heck Leo...are you using AI to create the video page image? That's awesome 👍
that thumbnail is briliant!!! can we download it for our desktop?
Great video my man! 👍🏽 Need this, building my first Itx build and will follow ur procedure but different parts.u sir got a new sub💯
Glad I could help 👍🏻
This case is cool. I didn't know about it till now. Thanks Leo, this is exactly what I need.
I love Thermaltake for their creativity, and even more so now after learning they have a bicycle store 😁
Thumbnail of the year done!! 😅
I like how you did not just take ThermalTake word and discovered there is the capability to install Micro ATX MB !!