Air-cooled Porsche 911 Bosch Starter Motor Rebuild P2 of 2: Reassembly, Bench Test, and Installation
ฝัง
- เผยแพร่เมื่อ 28 ส.ค. 2024
- Porsche 911 DIY Repair Blog: joe-engineer.com/
Comprehensive video of reassembly, bench testing, and reinstallation of the OE Bosch starter and the starter solenoid.
Additional Notes:
1. This starter assembly is Bosch P/N 0 001 312 100, 1.5 HP version off a 1983 Porsche 911SC.
2. This solenoid is Bosch P/N 0331 302032
3. Be very careful when bench testing with 12V car batteries.
4. Please take all necessary safety precautions. Not responsible for any personal injury or vehicle damage.
Amazon link to Bentley manual: amzn.to/3C9R4l5
If you would like to support the channel, please click this Amazon link and do whatever normal shopping you were going to do anyway: amzn.to/3yLlOGJ
IG: / joe_engineer
Thanks for posting. I did the same thing on my 84 Carrera. I had a bad ring gear on the flywheel and a bad pinon gear. I took the starter apart but could not remove it. I found your video but no explanation how to remove the gear. I finally figured it out after a couple of hours, I put a new solenoid, tested it outside the car ,perfect. Installed the starter and started the car fine, the next day upon starting, whining noise from the starter the gear would not retract.Took the starter out, tested again, fine. Put it back, whining noise even with two good batteries. I am giving up and ordered a new starter. Thanks anyway. Bernard
Excellent!
This was amazing! Thank you for all the detail and video...
(would you remember what temperature did you set your soldering iron to unsolder the solenoid? I hate to scorch it... ) but truly thank you!
Don't remember unfortunately. You could try setting the temp low and turn it up gradually until it just melts.
Great video! I see you have 2 washers before you mount the brush plate. I'm missing the insulating washer. Do you know a source where I can find it?
I would find a hardware supplier near you and search phenolic insulating or high temp plastic insulating washers. I like McMaster Carr as they have everything and are local to me.