The "Oak" looks amazing with the stainless bezel and the original resin strap. A lot cooler and more unique than the full stainless version. Might get this set myself. Thanks for the video!
I just installed one, looks awsome! I'd say the bezel is near-perfect, the band is pretty good, but getting it on is infuriating, and I've worked on watches for years. Finally had to dump the spring bars it came with and use plain 16mm ones, you can't even use the original pins.
@@joe19912 OMG seriously - I have the stainless steel band and was so frustrated I ordered my own spring bars. I swear I sat there for an hour trying to get the original ones to sit properly.
Casioak looks really nice! Not sure why casio hasn't made this yet. Their pricing for the stainless steel/ titanium models almost guaranteed there would be aftermarket options and these seem to be well made.
@@SmolStufff very true; however my concern has always been that cheaper non-magnetic... and quite lightweight... alloys can also be sourced by unscrupulous vendors. Perhaps some kind of hardness test too? I'm at a loss.
@@jananilcolonoscopu4034 There's a bunch of ways. Some are destructive, like filing part of it down or putting it on a grinding wheel. Also, if you have a really strong magnet it should be attracted to steel but not titanium.
Hey that's you! Haha. Thanks for the tip! Came out great. Though my wrist is like a couple millimeters too small for that bracelet. Maybe in the summer I'll crank it out again when my wirst grows due to the humidity 😂
I like the 5610 mod the most. My first G-Shock as well. I have a black SS bezel I'm waiting for as well as a V1 Combi. It should look nice. I'm hoping the polished part of the bezel matches the center links on the combi.
oh yes, the gwm5610 looks really nice. if only the "protection" and "g-shock" sign were painted in white. Black is also great but I would like to have it painted.
I bought the stainless steel band/bezel combo about 2 months ago. I fitted this to my DW5600 red ADRENALINE! Talk about Terminator!😎👍🏼 They are very well made & look fantastic. Good review again. 👏🏼 P.s. I’m wearing it now🤪 P.p.s. That GA2100 looks killer!😍
Great vid! The bezel for the GA-2100 is the most drastic change, but I think I like the black titanium on the 5610 most. Elevates the watch without changing the overall aesthetic. I put the 'cool black' bezel and bracelet on my GLX-5600 a few days ago and I love it so far. The bracelet seems to balance the weight of the bezel and makes for a really comfortable wear.
Tremendous video sir just tremendous thanks for the humor at the beginning I've been looking at these also waiting to see a review of the ga2100 model wanted to see if it's as nice as the square I think I see one in my future
Watching Casio I’m definitely getting that combo thanks to your great video. It’s like a combo between the Royal Oak and Hublot SS Classic Fusion but with G-Shock toughness. Great vision brother 👍
Hi, Thank you for the info . I purchased the stainless kit a few months ago haven’t assembled it yet & had no idea what the black stickers where for so thanks again.
The 8 points on the original plastic bezel are not left over from the trimmed off plastics. Those are the marks left by the ejector pins when the bezel is eject out of the mold.
Well done on the video brother... Tell me, did you use both sets of the button stickers and bezel stickers i.e. all 6 stickers that came in the box or just one? Also, do you think the aftermarket bezel comprises the integrity of the original bezel such as shock resistance? I'd really appreciate your opinion mate before I pull the trigger on a set...
I did use the stickers, but I don't think it's all that important. The bezel definitely compromises things from the original G-Shock. No doubt. Still worth it though.
Thanks for the video. I am glad I saw it :). I ordered my metal square bezel on 3/28 and am still waiting for the package to come. Taking so looonnngg... Would you mind share when you placed your order and how long you waited for your packages? Thanks.
Oh jeez, the metal square was pretty quick, like 3 or 4 weeks. The 2100 bezel was ridiculous. Almost 3 months. But that was also towards the beginning of the pandemic.
Nice mods! I've got the negative display GW-M5610 with plastic linked bracelet (not silicone straps) from Japan but with my slowly failing eyesight (due to age) it's too hard to read unless in bright light. I finally caved and ordered a positive display GW-M5610 off Amazon, and the black stainless steel case and bracelet off AliExpress this week. I'm tempted to buy the GA2100 but am waiting to see if they release a Tough Solar + Multi Band 6 version before I order and mod one. I'm tired of changing batteries and pressure testing each time so I got rid of almost all my watches that aren't solar or autos.
As for the polished parts of the bezels, if you were the handy type, you could do a fine bead blast on a steel bezel then send it for PVD or Cerakote elsewhere. But that would make it more expensive than buying a real full metal square, nyuk nyuk.
There are cheaper Titanium options for the square (different colors and finishes too). I am still to get a reply from the sellers regarding what kind of alloy is used.
Screw holes are easy to strip out? I guess casio didn't make them to last after all. My amazfit t-rex has brass inserts in the plastic to prevent the screws from damaging the plastic. And the straps are secured like g-shock g-steel watches.
With an octagon flush mounted head, I promise you those are not screws :). It would be a bit hard to turn them. The best you could hope for, would be bolts!
Definitely want to get a black titanium bezel for my black and gold GWB 5600 bluetooth square. One question: does a metal bezel make the alarms more quiet?
Would've been interesting too see the GA-2100 with a matching steel bracelet. Trump jokes OK. China/corona joke felt a bit tasteless to me, tbh. Great video, nonetheless.
Thanks for the feedback. It's all in good fun. It's a common occurrence now for all packages and groceries to be wiped down. The Simpson's kinda nailed it though.
I've done a few of these kits with the SS bracelet too, they work on the GA-2110 models as well so you can add a bit more colour to the dial. The bracelets are a bit more difficult to fit than the bezels but still very doable. If you put full metal casioak into ebay uk under sold items you can see the finished product. Well worth doing.
Anyone know if it's possible to get resin bezels for full metal squares? I'm serious! I want a square with the latest module but in a beating resistant plastic bezel.
I could understand if you wanted to replace all of the resin bands because they wear out fairly quickly. The metal bezel/resin band look is not my cup of tea. Each to his own. I prefer everything to be metal or everything to be plastic.
I do have that, and it's a pretty sweet bracelet. But with my tiny 6.5 inch wrist the lugs were just hanging over my wrist. I think it's because the first link on the bracelet is pressed up against the bezel essentially making the bezel that much taller. Maybe I'll show it off in another video. Thanks for watching!
@@WatchingCasio i wear a dw5600 with a stainless case and bracelet for work..eventually that first link , after getting smashed around a bit, loosened up and the bracelet now drops straight off the lug...i occasionally drop that big pretty watch from 2 heights of scaffold just to see the look on people's faces(i'm in hazmat/demolition...the watch takes tremendous abuse, and the scratches are glorious)
@@jimwilliams9430 Holy crap haha. Yeah the spring bars they sent aren't that good. maybe try different size bars to keep it in place? That's a rock dropped from so high haha.
I had experience that when I received a watch from china my throat stared to hurt. it last for next 12 hours. I don’t know why …what it was…but it was nasty experience
You mean the little screws? They do appeared to be screwed in, then filed down. I can't imagine you would be able to remove them. They are definitely part of the bezel, either way.
Watching Casio Much obliged for the reply, that’s great. My other G is a 2900 so not able to compare to another square. I’ll try the kit, if it doesn’t work it’ll be a good excuse to get a 5610 for it. Cheers!
Wow the Oak looks amazing - Casio probably will bring out this model.
One can hope :)
If AP doesn't sue them.
Now they did haha
The "Oak" looks amazing with the stainless bezel and the original resin strap. A lot cooler and more unique than the full stainless version. Might get this set myself. Thanks for the video!
Love that Audemars Piguet CasiOak! It needs to win a prize!
O boy u really made my day with the intro, laughed my ass off. Absolutely love the transparent band one transformation and adore the casio oak one.
The screws in the GA-2100 bezel are decorative rather than real as the hexagonal heads would not turn in the holes. Looks awesome though...
Hahaha! Funny beginning! 😁 I bought titanium camo set for my GW-B5600. Like it a lot! Stay safe, man! 😉
Awesome! Man, I wanted that one too. Super cool.
I just installed one, looks awsome! I'd say the bezel is near-perfect, the band is pretty good, but getting it on is infuriating, and I've worked on watches for years. Finally had to dump the spring bars it came with and use plain 16mm ones, you can't even use the original pins.
@@joe19912 OMG seriously - I have the stainless steel band and was so frustrated I ordered my own spring bars. I swear I sat there for an hour trying to get the original ones to sit properly.
I did the camo steel and the steel version to both my G-Shock squares.Looks awesome
Audemars Piguet CasiOak! Perfection!!
The 'screws' on the GA-2100 are certainly not actual screws. You can't screw a hex head screw into a hex shaped opening like that.
I put the same stainless bezel on my DW5600BB and really like how it looks now! Your Casioak is awesome!
It's amazing what a little stainless steel can do. Thanks for watching!
Casioak looks really nice! Not sure why casio hasn't made this yet. Their pricing for the stainless steel/ titanium models almost guaranteed there would be aftermarket options and these seem to be well made.
Agreed. I know that Casio hates it when people mod their watches, so it is what it is!
Always wondered... How can one tell if it's real titanium? Any thoughts?
@@jananilcolonoscopu4034 Titanium isn't magnetic. (Or weakly magnetic to be precise)
@@SmolStufff very true; however my concern has always been that cheaper non-magnetic... and quite lightweight... alloys can also be sourced by unscrupulous vendors. Perhaps some kind of hardness test too? I'm at a loss.
@@jananilcolonoscopu4034 There's a bunch of ways. Some are destructive, like filing part of it down or putting it on a grinding wheel. Also, if you have a really strong magnet it should be attracted to steel but not titanium.
Hey you did the metal bezel mod on the mirror dw5600 I mentioned a while back, nice! I'm a fan of the all chrome look.
Hey that's you! Haha. Thanks for the tip! Came out great. Though my wrist is like a couple millimeters too small for that bracelet. Maybe in the summer I'll crank it out again when my wirst grows due to the humidity 😂
He’s not lyin g I may still waiting for a pair of shoes. 4 months
I like the 5610 mod the most. My first G-Shock as well. I have a black SS bezel I'm waiting for as well as a V1 Combi. It should look nice. I'm hoping the polished part of the bezel matches the center links on the combi.
It's an octagon shape, but... still looks nice ;)
oh yes, the gwm5610 looks really nice. if only the "protection" and "g-shock" sign were painted in white. Black is also great but I would like to have it painted.
That Simpsons transition, ha!
The GW-M5610 takes this one by me
I bought the stainless steel band/bezel combo about 2 months ago. I fitted this to my DW5600 red ADRENALINE! Talk about Terminator!😎👍🏼 They are very well made & look fantastic. Good review again. 👏🏼 P.s. I’m wearing it now🤪 P.p.s. That GA2100 looks killer!😍
Gotta love it. They are pretty high quality. Enjoy!
Great vid! The bezel for the GA-2100 is the most drastic change, but I think I like the black titanium on the 5610 most. Elevates the watch without changing the overall aesthetic.
I put the 'cool black' bezel and bracelet on my GLX-5600 a few days ago and I love it so far. The bracelet seems to balance the weight of the bezel and makes for a really comfortable wear.
Nice! It's fun to try. And the best part is that if you get sick of it you can just replace the original bezel. Good times :)
Not kidding about the wait time; ordered two GA-2100 bezel and strap combos on 4/21, received on 6/10.
Ridiculous isn't it? Used to be a bit quicker before the pandemic, bit still...
Your video are becoming more and more better. And keep it up with your humor its hilarious!
Thanks for that! Much appreciated.
Wow! 🤩 the ‘Casioak’ is absolutely incredible! Great video 🙌🏼
Thanks! 😃
Best looking g-shock got even better
I used a little locktite blue on the screws, mostly because I don't trust non-casio screws to stay in place.
Tremendous video sir just tremendous thanks for the humor at the beginning I've been looking at these also waiting to see a review of the ga2100 model wanted to see if it's as nice as the square I think I see one in my future
Thanks a lot! Go for it - the GA-2100 is pretty nice.
I put a used metal look metal bezel on my 5610 from AE and have to say it looks really sharp. The used metal look just works with the resin strap
Wow, the GA-2100 looks amazing, I think I'll have to buy another and do this mod.
80 buck's - pretty expensive but the last one best lokk/price
I Can Sum Up This Video Along With Your Great Work In Two Words: Super Awesome!!! 👍👍👍
You rock. Thanks 😎
@@WatchingCasio You're Always Welcome!!! Thank You For Making Such Awesome Videos!!! 💪💪💪
The bezel is steel no not titanium?
Incredible video, thank you very much. Subscribed!
Thank you!
That CasiOak is AWESOME‼️ Def not too gaudy since you just went with the SS bezel w/out the SS band. Perfect Combo👍💯🔥🔥🔥
It's pretty sweet. Wearing it now :)
Watching Casio I’m definitely getting that combo thanks to your great video. It’s like a combo between the Royal Oak and Hublot SS Classic Fusion but with G-Shock toughness. Great vision brother 👍
@@Holt333 Awesome! It's a fun bezel. I'm enjoying it :)
I’m totally doing this
Nice to see someone with a sense of humour 😃 excellent video
Thank you!
Hi, Thank you for the info . I purchased the stainless kit a few months ago haven’t assembled it yet & had no idea what the black stickers where for so thanks again.
Awesome. Enjoy!
I have for my DW 5600 black vintage steel style and is amazing.
I like the black titanium best. The transparent square was my least favourite with a shiny steel bezel. I liked the original bezel better.
The 8 points on the original plastic bezel are not left over from the trimmed off plastics. Those are the marks left by the ejector pins when the bezel is eject out of the mold.
loved the trump "china!" impression at the begining:))))
you;ll love this then, th-cam.com/video/RDrfE9I8_hs/w-d-xo.html
@@rctezluh42069 Like I can't believe I have never seen that. Was just great lmao.
5600 looks the best with metal bezel imo. And im a huge fan of Casioak.
Is there a titanium version of the GA-2100 bezel and band?
I have not seen a titanium version.
Well done on the video brother...
Tell me, did you use both sets of the button stickers and bezel stickers i.e. all 6 stickers that came in the box or just one? Also, do you think the aftermarket bezel comprises the integrity of the original bezel such as shock resistance?
I'd really appreciate your opinion mate before I pull the trigger on a set...
I did use the stickers, but I don't think it's all that important. The bezel definitely compromises things from the original G-Shock. No doubt. Still worth it though.
Great review. 2100 looks really cool.
Thanks! I'm loving it.
Thanks for the video. I am glad I saw it :). I ordered my metal square bezel on 3/28 and am still waiting for the package to come. Taking so looonnngg... Would you mind share when you placed your order and how long you waited for your packages? Thanks.
Oh jeez, the metal square was pretty quick, like 3 or 4 weeks. The 2100 bezel was ridiculous. Almost 3 months. But that was also towards the beginning of the pandemic.
Love the vid bud a true classic 😁😁
Thanks for checking it out!
Super clean!
Looks great!
looks great llove my 5610 !
Nice mods! I've got the negative display GW-M5610 with plastic linked bracelet (not silicone straps) from Japan but with my slowly failing eyesight (due to age) it's too hard to read unless in bright light. I finally caved and ordered a positive display GW-M5610 off Amazon, and the black stainless steel case and bracelet off AliExpress this week. I'm tempted to buy the GA2100 but am waiting to see if they release a Tough Solar + Multi Band 6 version before I order and mod one. I'm tired of changing batteries and pressure testing each time so I got rid of almost all my watches that aren't solar or autos.
Do you still have the negative display 5610 with you? Can you donate ot and give it for free for a friend here in the Philippines?🙏
As for the polished parts of the bezels, if you were the handy type, you could do a fine bead blast on a steel bezel then send it for PVD or Cerakote elsewhere. But that would make it more expensive than buying a real full metal square, nyuk nyuk.
There are cheaper Titanium options for the square (different colors and finishes too). I am still to get a reply from the sellers regarding what kind of alloy is used.
Screw holes are easy to strip out? I guess casio didn't make them to last after all. My amazfit t-rex has brass inserts in the plastic to prevent the screws from damaging the plastic. And the straps are secured like g-shock g-steel watches.
The resin cases can definitely get stripped easily.
My Personal Favorite Of The Three Is The Black Glossy Bezel!!! 😉
Interesting, but the Simpsons cartoon at 0:21 near the beginning of your video is offensive.
yeah i really didnt get that at all...
@@Sovietise I was and am not happy about it at all.
@@Daud76 dudes an American bigot, what do you expect
With an octagon flush mounted head, I promise you those are not screws :). It would be a bit hard to turn them. The best you could hope for, would be bolts!
This is true! How did they get them on the original Royal Oak from Audemars Piguet?
the original bezel of the gwm5610 looks glossy... but mine looks black dove, is it different?
Tht stainless oak mod looks amazing
Thanks! I love wearing it.
Definitely want to get a black titanium bezel for my black and gold GWB 5600 bluetooth square. One question: does a metal bezel make the alarms more quiet?
I haven't noticed that, no.
@@WatchingCasio That's helpful, thank you.
Would've been interesting too see the GA-2100 with a matching steel bracelet. Trump jokes OK. China/corona joke felt a bit tasteless to me, tbh. Great video, nonetheless.
Thanks for the feedback. It's all in good fun. It's a common occurrence now for all packages and groceries to be wiped down. The Simpson's kinda nailed it though.
I've done a few of these kits with the SS bracelet too, they work on the GA-2110 models as well so you can add a bit more colour to the dial. The bracelets are a bit more difficult to fit than the bezels but still very doable. If you put full metal casioak into ebay uk under sold items you can see the finished product. Well worth doing.
Anyone know if it's possible to get resin bezels for full metal squares? I'm serious! I want a square with the latest module but in a beating resistant plastic bezel.
Hmm good question. Not sure. Try eBay and see what you can find.
I could understand if you wanted to replace all of the resin bands because they wear out fairly quickly. The metal bezel/resin band look is not my cup of tea. Each to his own. I prefer everything to be metal or everything to be plastic.
Yeah I'm on the fence. I do prefer the single unified look.
What’s the difference between the 5600 & 5610? Are they not the same size? Why the option on the site?
They have slightly different modules and cases.
Do these cases make the watches less water resistant?
hello boss, I want to ask, can the dw5600 bezel be installed to the g5600e.... because I have chosen the wrong one..
Hi, i may be organising a Casio-oak mod set tour. Would you be interested for review?
Tell me more!
@@WatchingCasio PM you at IG😊
Hmm I don't see anything
I’d love to see a video with your thoughts on the stainless MFG bracelet for the square!
I do have that, and it's a pretty sweet bracelet. But with my tiny 6.5 inch wrist the lugs were just hanging over my wrist. I think it's because the first link on the bracelet is pressed up against the bezel essentially making the bezel that much taller. Maybe I'll show it off in another video. Thanks for watching!
@@WatchingCasio i wear a dw5600 with a stainless case and bracelet for work..eventually that first link , after getting smashed around a bit, loosened up and the bracelet now drops straight off the lug...i occasionally drop that big pretty watch from 2 heights of scaffold just to see the look on people's faces(i'm in hazmat/demolition...the watch takes tremendous abuse, and the scratches are glorious)
@@jimwilliams9430 Holy crap haha. Yeah the spring bars they sent aren't that good. maybe try different size bars to keep it in place? That's a rock dropped from so high haha.
First two no longer available from March 2021.
Hey, nice mods!
What's the bandwidth option we need to select while getting just a bezel???
For which watch? Normally the case manufacturer will have the correct listing.
When You used titanium bezel you lost the gshock resistence because titanium is a strong metal and the original instead is made with soft plastic
This is true.
hey, how is the coating from black titanium looks like after 8month ? was it worth the 160bucks?
It held up just fine. Was it worth it? Eh probably not.
Does anyone know where can I get an aftermarket or replica bezel for a 1994 DW-5300? Any online store and/or web site? Thanks
Nice
I order a D.J. hat from an American company but for some crazy reason it's coming from China! I ordered it in February it's June 16 still waiting
It's bad. It's even worse with the pandemic.
Did you ever get your package? I just ordered the stainless steel bezel two days ago 😱
I had experience that when I received a watch from china my throat stared to hurt. it last for next 12 hours. I don’t know why …what it was…but it was nasty experience
I eagerly await your videos.
Thanks! Wish I could do more. Tough during these trying times.
I have a question, what is the weight of gwm-5610 with metal bezel?
Not sure, but not that much more than resin. The titanium is super light.
Hi bud , clicked your links up there but showing no longer available , any ideas where to source ?
it's ok I found them
Your 2100 would look better with the black bezel. Just my opinion.
I love your videos can you show or tell me that can we modify Casio a1362 watch so it can look premium like this one in this video plz reply
I've never seen an aftermarket bezel for that watch. Sorry.
@@WatchingCasio okey and thank you for replying I love your videos
Got the like just for the China flu Simpson joke! 🤣🤣🤣
Does this improve the accessibility of the buttons?
Not really.
@@WatchingCasio I appreciate your video and your answer. Thank you!
Could you please make a video about dbj 21?
Might wanna put a leather strap on the Casioak.
They're not fake screws, they're fake bolts.
Does anyone know if a steel quick release bracelet for the gm6900 exists? I would like to get the full metal effect 😉
I've actually seen one before. No idea where to get it though.
Links don’t work!
EXCELENTE!. 2100.
Love the sarcasm!
Are these hexagons on the CasiOak bezel separate pieces?
You mean the little screws? They do appeared to be screwed in, then filed down. I can't imagine you would be able to remove them. They are definitely part of the bezel, either way.
😂 great video opening
Thank you 😁
If none of these are endorsed by Casio then I suppose there all fake. I just bought bought a gold no logo set for my 5610.
ga 2100 silver bezel
Love the Simpsons clip ,very funny
Is a GLX5600 the same size as a DW5600?
Can't say for sure...but I don't think so. Different modules.
Watching Casio
Much obliged for the reply, that’s great. My other G is a 2900 so not able to compare to another square. I’ll try the kit, if it doesn’t work it’ll be a good excuse to get a 5610 for it. Cheers!
Si fuera mío yo sí lo cuidaba
Can i have the transparent one? :)
Probably not :)
Can you tell me your wrist size?
6.75 inches. Pretty small which is why I can't wear those huge g-shocks 😂
My wrist is only 6 inches and I only can wear squares and some ga2100
Pero. No sé ni cuánto cuesta
Chyna