s911 rc review with custom upgrades and problem fixes
ฝัง
- เผยแพร่เมื่อ 21 ส.ค. 2024
- Lipo (venom 3s 11.1 2200 20c) suspension heatsink fan rc truck rwd truggy buggy
Amosting s911 rc: amzn.to/2p5YKR0
1/10 buggy wheels amzn.to/2rupOdt
heat sink fan amzn.to/2ra40Uw
3s lipo battery amzn.to/2qd90mF
![[TH] 2024 PMSL SEA W1D5 | Fall | เก็บแต้มของจริง คือวันนี้](http://i.ytimg.com/vi/EciIAlCXg5k/mqdefault.jpg)
Great idea on the bits of plastic. My son's car had the same problem with the suspension pulling apart at the same location as yours. After watching your video I used a paper hole punch and punched some disks out of an old plastic juice bottle. I used a hot pin to burn a small hole thru each disk for the screw then doubled up my new plastic washers on the screw and reassembled the suspension. Works like a charm. Great idea. Thank you. My son was pretty bummed that his car broke but thanks to you we were able to breath new life into it.
Thanks for your comments. Im glad this vid was of use to you
Had the same issue near the tires. Was using aluminum foil washers! lol. But got some great ideas from your video and comments. I'll try and hole punch some soda cans to make washers! Thanks.
I made a couple small ice packs out of ziplocks and gel type ice packs. I just rubber band them on top the motor... super cool. just make sure you put a piece of cellophane over the motor so the sweat/ condensation don't short out anything.
Yeah I've done the same to mine .I have a problem with my motor overheating to I need to buy a fan for mine. Need to put a vid of mine in my channel. Take a look mate . I've subbed you anyway for a great video and good upgrades 👊👍👊
Tonys Rc Tech thanks a lot.
Your welcome Michael 👍👊👍
Hi I keep having a problem with the gear box the right joint cup keep breaking I've replaced the joint cup many time but it keeps breaking
I just used washers to keep the screws in the arms. Why didn't you just put a more powerful motor in it instead of using a heat sink and fan?🤔
It's only rwd and that would be really hard to control. Full throttle starts and any gravel or slippage would cause annoying spins all the time.
Well I had purposely lightened it and it was running nice. Rest in pieces.
The screws popping out are connected to the hubs and the arms, not the suspension.
Thanks sherlock
Hi my freind great upgrade video, I have a video on my GPTOYS S911 upgrade, I added 80mm shocks oil filled, wheels, body, also a WLTOYS A959 motor, check it out my friend, what motor do you have and what Esc do you have to accommodate 3s lipo battery ? 🤔 great work my friend 🇬🇧😁😀😁👍🇬🇧
Tonys Rc Tech stock just constantly watching the heat levels
Mike and Erin Rivera , lol it fine my friend. Happy watching brother 😊😁😊
you are running an 11 volt lipo with the original motor ? it don't fry the board ?
T. Man no it's fine with proper cooling
thank you.
Hope you can help. I got the same fan as you and connected to the motor but when I go to full throttle it stops. Any idea in how to fix it? thanks
Try reversing where it is attached. Make sure your battery is not defective.
Thats my baby
Where did you run the power for the fan off of, my boys has one of these that im upgrading parts are coming, i have a rustler so now he wants better, i have new motor coming, heatsink with fan, extra fan, 7.4 1500mah lipo, step down 12vto 5v for running fans and lights, oil shocks, and 1/10 buggy tires also, also ordered a new reciever/esc board just in case as we fried the motor good running my 8.4 nimh in it lol
Oh and also its getting trx plugs so i can use my ez peak to charge mineand his lipos lol
Im going to run fans right off the board where the battery runs in that way fans can run while car isnt moving and lights but step down for voltage is necessary for that
I spliced into the wires running to the motor. That way whenever the car is on the fan will be cooling it.
Ill post some video once its done
Yours is going to run nice with those hop ups. The lightweight wheels will help handling and speed and lipo power and runtime.
Hi!! Did u ever made the video of it running?
Jacob TV i did make a few on my channel but the lipos kept stripping the gear boxes so i had to let her go...😥
Michael Rivera too much battery for the gearbox?
Jacob TV i spent around 75-100 on upgrades. Wheels 15 , heatsink/fan 15, connector 5, lipo battery 20, spoiler 12, gearbox 15 each etc
Jacob TV yes definitely. It is really fast and fun though while it lasts. 4wd would help it be more stable and controllable.
well, even I am upgrading this car I got oil filled shocks and hsp buggy wheels and some new rocker arms and a heat sink for the motor but my question is:
IF I BUY 3S WILL IT BE ABLE TO HANDLE IT AND NOT GET BURNT EVEN ONE TIME??? guys pls answer me pls :)
a fan would really be helpful. even with the fan and heatsink i burned out 2 motors. it can handle 3s with constant monitoring. leave the cover off for "breathing"
Souriddha chakraborty i eun 2 s and i have been running for 3 months at least with out any heatsink
Think a 10th scale brush less motor will mount up in it?
Robert Brickle no prob not. the size and the way the motor fits will be an issue. i was thinking of doing that myself. this car is also lacking a proper esc to work along with that motor.
What did you connect the heat sink 2
thecali game right onto the motor
How did you wire the heat sync fan?
Trent McMillan splice into the wires running into the motor
Can u put a link to the wheels u used?
yeah I put the link to the wheels in the description now
What do you use to charge that battery?
Alexandre Luís e3 sky balance charger
how did u wire the heatsink
I spliced into the wire running from the motor. just keep the same colors together and it'll work great
How did you put the heat sync on?
Sennafanf1 it snaps on snug to the motor
Michael Rivera oh thanks ive beighn wondering when to get one great video
Sennafanf1 thx. Get one right away or the motor can burn out
Michael Rivera yeah then ill get a 4s battery and some wheels.pratically what youve got
Sennafanf1 thats gonna be nice!
best place to get gearbox ?
T. Man amazon
yeah i was just looking for a cheaper place But, i just watched a video where the guy glues the gearbox solid and makes it positrack and never buy a gearbox again. basically the 4 spider gears and the other gear that goes on there is glued solid and makes positrac instead of limited slip. Thanks. the link to that mod / permanent gearbox fix. th-cam.com/video/5_ajSSIDI_c/w-d-xo.html
How do I install the fan for the rc truck??
Roberto Rodriguez splice into the wire running to the motor, red and black.
Michael Rivera are you talking about where the battery connects to on the RC
You can do that one but its short. Do it from the motor to the receiver box better.
This is too confusing can you do a video review about it please
Roberto Rodriguez I don't have time. If you are changing from the crap plug to tamiya or whatever connection take that opportune time to put your fan wires red to red black to black. It's that simple.
lol Please tell me you changed the connector....
Rc_ KiNg to tamiya
Michael Rivera ewwwwwwwwwwwwww those are crap i would use xt60 or deans ... my stock tamiya connector would melt cuz they are crap
Rc_ KiNg the one i got actually fell apart too. One side got loose from the plastic and it would cut off the car sometimes
Michael Rivera get a pair of deans man they are awesome they never overheat or anything or even better xt60 check em out on banggood... also unsolder the stock wires and put in some good quality silicone 16 gauge wire also same thing with Battery wires.. i did it to mine and everything seems cold after run ... my battery was getting super super hot with stock connector and wires...
Rc_ KiNg ill look into that. Thx
shocks?
Mr.Mustache_007 i use the stock suspension. i tried other stiffer shocks but it made it tall and too springy. this absorbs pretty well the way it is.
thanks