I do the very work that you do here in the United States , you should put enough air in the tire to hold the lock ring in place but do not air up the tire till it on the truck ! This will help prevent a three piece rim coming apart and not caged between the two tires And or the tire to blow out when you are putting the tire on the truck ! Only pump up the tire after you have removed your jacks and the tire is secure on the truck and you are away from it ! I have seen cracks in the locking ring on them type of wheels and if it break it would be bad !! I have also see tires blow out setting in a parking lot and not going down the road ! I hope this will keep you safe and able to do this type of work for years to come to support your family ....
You are absolutely right Randy, this happen ed in Malaysia last year , when the worker inflated a crane tyre and it exploded the rim hit his head caused severe head injuries.died on the spot.
@@EnemyDwarf-TTV there are a lot of cracks at the rim - 7:44min, where the nuts tighten the whole wheel, so you can't be 100% sure it will not blow apart when pressuring the tyre. I know this is not normal, but accident is accident, otherwise it should call future prevision and wouldn't have accidents.
Nice video, all workers, Nicely and clean and tidy, brightly painted Nice colors, looks very well organised, excellent. Good Clean Work So.......... thanks By Wow Mechanics1
I guess that the unbalanced baldies would be OK in a place where 50 kph was a good speed. Still, one has to admire the "can do" ingenuity of roadside service offered. The trolley with coil springs taking most of the weight of that hefty rattle gun was an eye-opener! Good thinking!
@@nunez23j1 This is the boogey tires on the third not liftable axel, so they should be balanced just as well as the drive tires on the second axel and steering tires on first axel., When come to lift able third (or second) axel there is no need for balancing exept for comfort.
Put some top fuel drag slicks on them rims, it will make the truck go faster. Really liked the cracks by the holes for the lugs, good for another 100,000 miles. Can't be too safe!!
I didn’t realise that they ran one super tread, coupled with a slick to cover all eventualities! Must be the best all round/all weather combination out there eh!? Shit, dangerous or what...bless em! Cheers
SUPERRR JOB ONE MAN SHOW ...!!! YOU ARE GOOD , regards from kuala lumpur and TIRUPARAKUNDRUM family of RAMAN S. thiagarajah free clinic 1997 , hai Suresh , Kumar , uma ...? I'm uncle Eddy Opel .
This pressure - operated jack is some pretty useful piece of equipment I haven't seen yet! No levers, no cranks - no sweat! Easy! Throughout the procedure we can watch here - pulling the rims first, then the tyres - we can also see that these trucks are the last of the Dinosaurs, technically spoken: bias tyres (check the size, 10.00 - 20, so it's not a radial tyre), split rims, and other interesting technical features rooted in the past. But still running.
@@raymonster55 Sorry, no idea! Maybe these tyres are still being made with a lower price in mind. Old stock? Bias tyres are not made anymore since the late 1970s or so, so any stock of vintage rubbers would be very hard to find. However, Nylons are still manufactured for some vintage cars the rims of which do not accept radials. One company called Mitas, situated in the Czech republic, is a specialist for vintage nylon tyres.
@@jurgenkuhlmann9194 Thank you so much for your reply. I wasn't sure exactly when the bias ply tires were officially discontinued. I know that they still offer new bias ply tires for light duty trailers. You can get Koker brand tires for older vehicles, many look like the bias tires they are replicating but are actually modern radial construction.
@@raymonster55 You mean cross ply tyres?' I think China manufacture cross ply tyres, as some vintage lorries and buses, cannot be fitted with tubed or tubeless radial tyres. So there is a limited market for cross ply tyres especially among those owning a 1930,50,s vintage lorry ,bus ,or coach.
@@basiltaylor8910 I think cross ply and bias ply mean the same thing. Just called different things in different places. I'll bet you're right. Older vehicles may work better with the old style tyres. Cross ply tyres are mostly obsolete where I live for highway use except for trailers.
Hi Saravana Tires. Umm you do realize the rim was broken? 2 cracks beside the mount holes. Pity you had to put treadless tires on. Guess the rest are sort of the same. Tough times. That is a lot of hard and tricky work, for putting back such parts. Massive loading as well. Good luck!
I admire all the hard work you do remember to put safety and health when doing things in a planet for people who put the best ways of working true admiration ❤️❤️👋👋
Trabaje un tiempo haciendo eso, pero siempre con botas de trabajo, imagínate, si te pegas un madrazo con ese martillo como te quedaría el pie, de verdad tienes agallas bro !
Me gustan esos rines, se ven muy reforzados, una vez me tocó reparar una llanta de un remolque de un camión con 60 toneladas de piedra de mármol, una de esas llantas tenía 135 psi, imaginen nomás cuánta presión !
Vosa here in the UK wouldn't allow the replacement tyres on the road as for wheel tightening the guy should have done the diagonals so it pulls the wheel on straight.
Respect to those that have to deal with conditions/material and salaries we Western people can not even imagine!!! I have seen myself how tough the driver’s and mechanic’s live is in the 3rd World.... I wish you guys the best of luck and of course,a very happy 2023... Those who critisize you from far away.... they have no clue... don’t mind them.... Kind Regards,Greetings,Henk,the Netherlands.
Świetna jest ta zrobiona robota pozdrawiam twórcę tego filmiku i bardzo świetny jest ten cały zrobiony kewarek samochodowy pozdrawiam twórcę tego filmiku 👍👍👍👍
Wow! Lots of things different in whatever country this is in. Not much for OSHA regulations, me either......but some things I just won't do. Wearing flip-flops while mounting tires is high on the list. Airing up junk tires is another no go. The last junk tire I installed blew out at 70psi, glad it was bolted to the truck. Still got injured, but could have been dead.
கட்டைலாரியை ஓட்டி டிரைவரை பாராட்டவேண்டும் மிகதிரைமையான வர் டையர் போல்ட்ஏரில் டைட் செய்தால் போதாது கையால் போல்ட் டைட்டா எ உறிதி செய்து கொள்ளவேண்டும் சில நேரத்தில் காற்று டைட் ஆககூட இருக்க வாய்ப்பு உண்டு ஏர் கொள்ளளவு மிக குறைவாக இருந்தால் இந்தபிரச்சனை வரகூடும்🙏
pure and unadulterated Tamil ingenuity - a sampler! ....that trolley with coil springs taking most of the weight off that hefty rattle gun !!! classic !!! This is the Land that gave birth to; The Father of MIMO(WIFI) .... thanks to Dr Arogyaswami J. Paulraj Dr Shiva Ayyadurai - inventor Copyright owner of 'EMAIL' (1982 U.S. Copyright Office TXu-111-775) Dr CV Raman - who gave the world the 'Raman Effect' .... one of the uses being the 'SORS System' used in ALL airports and police world-over This land also gave the world the 'Chandrasekhar Limit' Wootz steel or Damascus steel(derived from the Tamil word ‘Urukh’)... BTW the name 'Ur' in Genesis 11:31 is borrowed from Tamil, "Ur" in Tamil means "village" Ayurveda is actually a concept borne and evolved out of the Tamil Medicinal System called 'Siddha'.... and the list goes on and on.. hang on tight we have more to offer :) ARAM PORUL INBAM VEEDU
I see that more air pressure was put in the tire with absolutely no tread to make up for the difference in diameter! Oh, and the crack in the rim is supposed to be there!
Probably the truck driver was lucky to find those emergency used tires, when you are traveling from one side of the world to the other, sometimes even a gallon of water is hard to find, I know.
Из видео я понял, каждый мост на своих рессорах. Задний мост не ведущий. Под колеса необходимо ставить противооткатные упоры( башмаки). Под задний мост необходимо ставить подставку , а не второй домкрат. Накачивать колесо нужно замочным кольцом вниз, или в специальной клетке для колеса. А так молодцы- умеете работать . Лайк
1 tire with no tread the other with visible tread lines but depth not measurable. Nothing goes to waste! Not sure that steel band through would have helped much if the rim came apart at 100 psi. Safety second!
Amazing that the old fashion rims , and the smartest technique?......is the bar he cross thru the rims holes ; why?....back then I remembered to see people with broken arms or head , because the ring who keep the tire in place , when they inflating the tire 250 psi , that ring snap off and fly like a bullet and easily can kill someone ....that bar save lives....
@@ginog5037 easy for you westerns to make this argument.. if you barely eat comfortably 3 times a day, they give no sh*t for eco friendly or whatever, just put whatever tire in there that works to make those money to buy food and other needs.
@@lesterloutte2320 You just proved how irrelevant human life is. Especially on those mountainous roads with over loaded trucks. I would expect an apology from you with your short sided dumb comment?
I do the very work that you do here in the United States , you should put enough air in the tire to hold the lock ring in place but do not air up the tire till it on the truck ! This will help prevent a three piece rim coming apart and not caged between the two tires
And or the tire to blow out when you are putting the tire on the truck ! Only pump up the tire after you have removed your jacks and the tire is secure on the truck and you are away from it ! I have seen cracks in the locking ring on them type of wheels and if it break it would be bad !! I have also see tires blow out setting in a parking lot and not going down the road ! I hope this will keep you safe and able to do this type of work for years to come to support your family ....
these tires have inner tubes mate,,,
@@EnemyDwarf-TTV it still has a ton of pressure and anything can fail, inner tube or not.
You are absolutely right Randy, this happen ed in Malaysia last year , when the worker inflated a crane tyre and it exploded the rim hit his head caused severe head injuries.died on the spot.
@@EnemyDwarf-TTV there are a lot of cracks at the rim - 7:44min, where the nuts tighten the whole wheel, so you can't be 100% sure it will not blow apart when pressuring the tyre. I know this is not normal, but accident is accident, otherwise it should call future prevision and wouldn't have accidents.
الو
That service cart for the impact driver is a genius idea.. looks like it makes the job much easier
The awl or punch looks like a sharpened valve.
It sure does, never seen that before, great idea.
I'm sure saves back muscles.
NICE JOB !!! .... Those two Baldies have many many more miles to go !!!
Love the safety flipflops as well.
i would love the invisible ones a bit more^^
They wear flip flops for everything over there. I dunno, maybe steel toe work boots are financially out of the question.
Them there steel toe flops.
I always look for missing toes and fingers in these videos. I have not noticed any yet.
It's safety feature is second to bear feet.
Thanks
Great skill evolved here. And brute force.
The music and sounds were great!
Love the safety flip flops!!! 🤣🤣
Wow, brand new slick tires for a ten wheeler, amazing !
🤣🤣🤣🤣🤣🤣
Bangin fuel economy.
у них уже эпоха безумного макса!
Nice video, all workers, Nicely and clean and tidy, brightly painted Nice colors, looks very well organised, excellent. Good Clean Work So.......... thanks
By Wow Mechanics1
Love the metal through the rim in case the locking ring comes off.
I'm sure it would stop it...
I guess that the unbalanced baldies would be OK in a place where 50 kph was a good speed. Still, one has to admire the "can do" ingenuity of roadside service offered. The trolley with coil springs taking most of the weight of that hefty rattle gun was an eye-opener! Good thinking!
Self balancing racing slicks.
And I bet he made that trolley himself.
You don’t balance drive tires, son.
@@nunez23j1 This is the boogey tires on the third not liftable axel, so they should be balanced just as well as the drive tires on the second axel and steering tires on first axel., When come to lift able third (or second) axel there is no need for balancing exept for comfort.
Love it no tread on the tires 😁😁
Great job sir this is back breaking work my hat off for you, greetings from California USA 🇺🇸.
Nice job, a couple of virgin Continentals.
Nice new slick tyres going back on
الخدمة ديال بصح والعمل الجاد تحية من المغرب
Mr. Saravana Munnu tyres . And a heavy job , but done with safety and knowledge . Congratulations , from here in Brazil .
Put some top fuel drag slicks on them rims, it will make the truck go faster. Really liked the cracks by the holes for the lugs, good for another 100,000 miles. Can't be too safe!!
at least they have the safe rims.
Love the heavy pneumatic driver that is counter sprung for easy handling. We don't have that where I live.
Respect for your skills and work ethic from Texas, USA :-)
Excellent worker good job !! And also hard worker’s
Você é um excelente profissional, muito sucesso pra você falo aqui do BRASIL 🇧🇷
I didn’t realise that they ran one super tread, coupled with a slick to cover all eventualities! Must be the best all round/all weather combination out there eh!? Shit, dangerous or what...bless em! Cheers
SUPERRR JOB ONE MAN SHOW ...!!! YOU ARE GOOD , regards from kuala lumpur and TIRUPARAKUNDRUM family of RAMAN S. thiagarajah free clinic 1997 , hai Suresh , Kumar , uma ...? I'm uncle Eddy Opel .
This pressure - operated jack is some pretty useful piece of equipment I haven't seen yet! No levers, no cranks - no sweat! Easy!
Throughout the procedure we can watch here - pulling the rims first, then the tyres - we can also see that these trucks are the last of the Dinosaurs, technically spoken: bias tyres (check the size, 10.00 - 20, so it's not a radial tyre), split rims, and other interesting technical features rooted in the past.
But still running.
Radial tires came off. I didn't know that old bias ply nylons were still around. Do they still make them or are they still using old stock?
@@raymonster55 Sorry, no idea! Maybe these tyres are still being made with a lower price in mind. Old stock? Bias tyres are not made anymore since the late 1970s or so, so any stock of vintage rubbers would be very hard to find. However, Nylons are still manufactured for some vintage cars the rims of which do not accept radials. One company called Mitas, situated in the Czech republic, is a specialist for vintage nylon tyres.
@@jurgenkuhlmann9194 Thank you so much for your reply. I wasn't sure exactly when the bias ply tires were officially discontinued. I know that they still offer new bias ply tires for light duty trailers. You can get Koker brand tires for older vehicles, many look like the bias tires they are replicating but are actually modern radial construction.
@@raymonster55 You mean cross ply tyres?' I think China manufacture cross ply tyres, as some vintage lorries and buses, cannot be fitted with tubed or tubeless radial tyres. So there is a limited market for cross ply tyres especially among those owning a 1930,50,s vintage lorry ,bus ,or coach.
@@basiltaylor8910 I think cross ply and bias ply mean the same thing. Just called different things in different places. I'll bet you're right. Older vehicles may work better with the old style tyres. Cross ply tyres are mostly obsolete where I live for highway use except for trailers.
Nice replacement tires!
Been there done that..
A KEN tool would help them..
Also a shovel makes it easy for lifting the wheel
When putting them on the axle..
Cheers..
Hi Saravana Tires. Umm you do realize the rim was broken? 2 cracks beside the mount holes. Pity you had to put treadless tires on. Guess the rest are sort of the same. Tough times. That is a lot of hard and tricky work, for putting back such parts. Massive loading as well. Good luck!
Thanks
when you wan't to do drifts or stunts with your truck, this seems perfect!!
너무 고생하셨습니다 ~^^
앞으로 좋은일만 가득하시길~~~
여기는 대한민국 입니다
유트브 잘보고 있어요
He got the slicks mounted, let's start the race.
Poor dog got stepped on , but nice work DOT would love that trucker 😀
I admire all the hard work you do remember to put safety and health when doing things in a planet for people who put the best ways of working true admiration ❤️❤️👋👋
hard working people they deserve kudos they repair tires the old hard way!
I just love them steel toed flip flops lol.
I've seen more tread on a beach ball than those tyres, lol. 😂
You forgot to say NEW tires.
That tier is used because companies don't give enough money to replace the burst tiers with new tires
I hope is a temporary fix until he gets to a shop that has better tires. I don’t think you can drive more than a week on those tires.
@@michelchartrand7257 those aren't new
Should be rebuilt/rethreaded tyres..
Love the great work but Santa will surely have to get you a new large air compressor for all the hard work in the garage cheers 👍👍👍
Hart earned money, good work. The new used ones are a bit worn. 😉
Fantastic job bro 💘 from pakistan
Trabaje un tiempo haciendo eso, pero siempre con botas de trabajo, imagínate, si te pegas un madrazo con ese martillo como te quedaría el pie, de verdad tienes agallas bro !
Me gustan esos rines, se ven muy reforzados, una vez me tocó reparar una llanta de un remolque de un camión con 60 toneladas de piedra de mármol, una de esas llantas tenía 135 psi, imaginen nomás cuánta presión !
Vosa here in the UK wouldn't allow the replacement tyres on the road as for wheel tightening the guy should have done the diagonals so it pulls the wheel on straight.
I'TS HARD WORKS ,BUT WONDERFULL. GOD BLESS YOU MAM.
Excellent Video Sir…
Good work
18:50 RIP Firulais haha xDD, Nice video.
Você merece um prêmio por conseguir realizar essa façanha de trocar esses pneus na beira da estrada....
Like from Germany 🇩🇪 👍 👍 👍
I can't wait for the next video, where they repair the tyres they've taken off.
10 gear hyva truck tipper ki back side ki middle wali agar tyre puncture Ho jaaye to vahan per kis tarah se Jack uthai jaati hai
Hard work pay's off everytime..🎉🎉
Those are mad skills right there!!!!
Nothing better than replacing the shredded blown-out tires with a pair of worn-out of slicks for hauling overloaded wood loads.
give him another 1 miles n back to shred again!
tambal banya orang batak bukan ya
I didn’t see the rim changed, they showed multiple cracks at the stud holes. 😳🤯
Respect to those that have to deal with conditions/material and salaries we Western people can not even imagine!!!
I have seen myself how tough the driver’s and mechanic’s live is in the 3rd World....
I wish you guys the best of luck and of course,a very happy 2023...
Those who critisize you from far away.... they have no clue... don’t mind them....
Kind Regards,Greetings,Henk,the Netherlands.
Yessssss!!@@henktulp4400
NGL but the guys did good work with what they had. Split rims on the other hand are called “Widow Makers” for a reason.
if i ever get a Semi and it has split wheel i'm getting new one piece wheels.
Except those are not split rims. They are locking ring wheels. A world of difference between the two.
Judging by the pressure state of the second pair of wheels, it is not surprising that the wheel exploded
Many people have killed those rims with removable ring.
They do what many here in Europe forget to do with tube tires, putting talcum powder
Never fit a radial and a X ply next to each other. The casing heights is diffferent and also load indexes..
Świetna jest ta zrobiona robota pozdrawiam twórcę tego filmiku i bardzo świetny jest ten cały zrobiony kewarek samochodowy pozdrawiam twórcę tego filmiku 👍👍👍👍
Wow! Lots of things different in whatever country this is in. Not much for OSHA regulations, me either......but some things I just won't do. Wearing flip-flops while mounting tires is high on the list. Airing up junk tires is another no go.
The last junk tire I installed blew out at 70psi, glad it was bolted to the truck. Still got injured, but could have been dead.
How come that axle was free spinning, no brakes on that axle??
Good work and skills greeting here from planet nemic
Excelente labor, que es el polvo blanco, saludos tabasco México
கட்டைலாரியை
ஓட்டி டிரைவரை பாராட்டவேண்டும் மிகதிரைமையான வர் டையர் போல்ட்ஏரில் டைட் செய்தால் போதாது கையால் போல்ட் டைட்டா எ உறிதி செய்து கொள்ளவேண்டும் சில நேரத்தில் காற்று டைட் ஆககூட இருக்க வாய்ப்பு உண்டு ஏர் கொள்ளளவு மிக குறைவாக இருந்தால் இந்தபிரச்சனை வரகூடும்🙏
Ooooooooooh Amazing video 👍👍👍👍👍👍👍👍👍👍👍👍👍
pure and unadulterated Tamil ingenuity - a sampler!
....that trolley with coil springs taking most of the weight off that hefty rattle gun !!! classic !!!
This is the Land that gave birth to;
The Father of MIMO(WIFI) .... thanks to Dr Arogyaswami J. Paulraj
Dr Shiva Ayyadurai - inventor Copyright owner of 'EMAIL' (1982 U.S. Copyright Office TXu-111-775)
Dr CV Raman - who gave the world the 'Raman Effect' .... one of the uses being the 'SORS System' used in ALL airports and police world-over
This land also gave the world the 'Chandrasekhar Limit'
Wootz steel or Damascus steel(derived from the Tamil word ‘Urukh’)... BTW the name 'Ur' in Genesis 11:31 is borrowed from Tamil, "Ur" in Tamil means "village"
Ayurveda is actually a concept borne and evolved out of the Tamil Medicinal System called 'Siddha'.... and the list goes on and on..
hang on tight we have more to offer :)
ARAM PORUL INBAM VEEDU
Great equipment ! Till you get to the shoes .
Watch your toes !
Always wear your safety flip flops, just in case you drop something heavy!🤔
Hahahahahaha fucking genius 👍
Engage safety squirts just before the tyres blow out.
He IS wearing the safe ones with reinforced straps. No injury likely... 😂.
Carbon tipped safety flip flops
@falco 666 > He's got a personal forcefield activated when he got those flip flops on I guess. One wrong move it's bye bye toes or lame injured foot !
2 crap tirers (apollo high endurance).ready 4 the next punkture.😂like the white dog.
Взяли и снова лысые покрышки нацепили 😀
Very tidy shop, demonstrating safe procedures....
Slicks for better traction...
The tires won't last long, as far as they've already worn down.
Video super bro naturala irunthathu eppadi bro rendu tyarum onna damage aachu air pressure adhigama irrunthuccha.
Whatever he was doing with the wheel nut remover the duck was certainly enjoying it.
bruh. bought another problem. them slick tires gonna be 🔥
With these conditions of the tires, how could this truck reach the service center and why was the replacement tire completely smooth and used?!!🤔
Ah replacing a dead tire with a racing slick version!
Those tires would never pass DOT specs here in the US. Hell, i wouldn't use them on my own specs.
@@timothygeiger8271 it was an "ENDURANCE" one... small step for man kind but huge step for reusing tires
@@timothygeiger8271 uuuuuuuuuuuuuuyyy
@@manikantnaik1670 try making sense with your comment
No
I see that more air pressure was put in the tire with absolutely no tread to make up for the difference in diameter! Oh, and the crack in the rim is supposed to be there!
good job man you guys are really good and talented god bless😁🙏🙏
By the look of the used tires they'll have a client for life!🤣
We are not USA
Probably the truck driver was lucky to find those emergency used tires, when you are traveling from one side of the world to the other, sometimes even a gallon of water is hard to find, I know.
Из видео я понял, каждый мост на своих рессорах. Задний мост не ведущий. Под колеса необходимо ставить противооткатные упоры( башмаки). Под задний мост необходимо ставить подставку , а не второй домкрат. Накачивать колесо нужно замочным кольцом вниз, или в специальной клетке для колеса. А так молодцы- умеете работать . Лайк
Хотя бы железку подложили под замок, умные, однако...
@@БарановАртем-п7у железку подложить под замок ума не надо. Жизнь и здоровье каждому дорога.
Стучать кувалдой надо не по кольцам а по пустой голове и красный диск с трещинами я так понимаю обратно поставили
1 tire with no tread the other with visible tread lines but depth not measurable. Nothing goes to waste! Not sure that steel band through would have helped much if the rim came apart at 100 psi. Safety second!
150 psi!!
Nice banana peals for tires. Such shit that they need inner tubes. But as long as they hold air and fit, it all good.
Well done. Nothing easy about that job. No tread on the inside tyre?👍☘️
Tire tread is overrated.
Excellent videos ! 🙏
Каюсь. Думал, что покрышки восстановят! Но технологии всё-таки не такие совершенные!!!
Great video ⚙⚙🛠🛠👌👌👍👍😉😉
Amazing that the old fashion rims , and the smartest technique?......is the bar he cross thru the rims holes ; why?....back then I remembered to see people with broken arms or head , because the ring who keep the tire in place , when they inflating the tire 250 psi , that ring snap off and fly like a bullet and easily can kill someone ....that bar save lives....
10:56 awesome steel toe boots 🥾 very good protection
Who is the guy Whistling periodically? Is it some kind of "message?"
These replacement tires aren't taking this truck too far away!
Interesting clip, thanks for sharing.
Everything ist very interesting, but sad that they cant Put new Rolls , thisone after 3 mounts again Something broken again 😢
7:44 don’t mind those cracks. Those only take a truck out of service in countries that care about motorists safety
You don't need to worry about cracked rims...these trucks are never extremly overloaded...
@@otacdjeteta6126 🤣
டேய் அதெல்லாம் இருக்கட்டும் பிரச்சினை இல்லை அதை எடுக்க வேண்டாம்🤣🤣
Next video: Welding up cracked truck rim 😉
@@dave161141 no fixing up cracked up truck!
😳Always replace blown tires with tires that have (NO TREAD WHAT SO EVER‼️) that way you have repeat customers 👍
Д
That’s what they could afford
@@murali5247 Agree, but what about a little safety and common sense. Knowing that do you ever think they will ever go green...
@@ginog5037 easy for you westerns to make this argument.. if you barely eat comfortably 3 times a day, they give no sh*t for eco friendly or whatever, just put whatever tire in there that works to make those money to buy food and other needs.
@@lesterloutte2320 You just proved how irrelevant human life is. Especially on those mountainous roads with over loaded trucks. I would expect an apology from you with your short sided dumb comment?
That's some scary stuff thete 😨 but they got it did so .AWESOME
Sporting those Baldinos by mapop, maypop today maypop tomorrow 😆.
After all this heavy labor, treadless tyres?
Are those osha approved flip flops? Also why use a bald tire?
Это те самые восстановленные покрышки??
换的第一条胎也不是新胎，第二条胎更是已经磨光了，居然还要？
После ремонта можно двухкратный перегруз делать и гарантия от мастера 6 месяцев.