Done a lot of track changing after much switching and running some trains. Just the inner loop on the left side for switching industry tracks. The runarounds did not need any mods. They run fine with the 315 curves.
I have changed my kato couplers to Micro Trains couplers and I have no issues at this time. It’s a pretty simple fix. Thanks for sharing. Have a good day. 😎😎👍
Thanks for the info. I swapped one of my ES44AC's couplers with the 2004 micro trains and they are both higher than the MTL gauge and new rolling stock. I haven't seen anybody else mention that from 4 or 5 videos I've watched 🤷♂️
This is a common complaint with KATO couplers. It happens when pushing or reversing longer runs of cars. Most advise switching over to micro train couplers for reliability. But the preferred method is to install body mounted couplers. Which can be costly. So another option is having yard leads with an entry and exit. This way you will be pulling cars. It does hinder the switching aspect. But you will still be able to switch smaller sets of freight cars. I personally leave the stock KATO couplers and keep the car lengths to 9 cars when switching. As always, they are plenty ways of skinning a cat !! So this is just some of the things I have learned along the way and wanted to share. Love the layout !
Awesome comments for everybody to read! Thanks. I've got you on the options and agree 100%. I couldn't help myself, so I busted the track up and put the large radius turns on the turnouts, and it is easier to back in the same number of cars into these lanes. They won't get any longer cause I'm out of room, LOL. Really appreciate the experience 👍
replace Kato couplers,Micro Trains long shank give you more wiggle room or body mount more of your freight cars.6 axle locomotives have more overhang,causing more pressure on adjacent couplers
Ok. I wonder what part number that would be 🤔. I went ahead and changed the track turnouts to normal for the back end industries. Seems fine now. Thanks for the input. I'll look into that 👍
I have changed my kato couplers to Micro Trains couplers and I have no issues at this time. It’s a pretty simple fix. Thanks for sharing. Have a good day. 😎😎👍
Thanks for the info. I swapped one of my ES44AC's couplers with the 2004 micro trains and they are both higher than the MTL gauge and new rolling stock. I haven't seen anybody else mention that from 4 or 5 videos I've watched 🤷♂️
This is a common complaint with KATO couplers. It happens when pushing or reversing longer runs of cars. Most advise switching over to micro train couplers for reliability. But the preferred method is to install body mounted couplers. Which can be costly. So another option is having yard leads with an entry and exit. This way you will be pulling cars. It does hinder the switching aspect. But you will still be able to switch smaller sets of freight cars. I personally leave the stock KATO couplers and keep the car lengths to 9 cars when switching. As always, they are plenty ways of skinning a cat !! So this is just some of the things I have learned along the way and wanted to share. Love the layout !
Awesome comments for everybody to read! Thanks. I've got you on the options and agree 100%. I couldn't help myself, so I busted the track up and put the large radius turns on the turnouts, and it is easier to back in the same number of cars into these lanes. They won't get any longer cause I'm out of room, LOL. Really appreciate the experience 👍
Looking better and better
Thanks a ton
Love those tankers and new cars
Thanks 😊
Love all the new cars
Thank you much
great video, helped me solve a couple of issues on my n scale Kato layout running Kato SD locos. Doesn't happen with the Scale Trains 44's though...
Good to know. I just got a scale trains dash 8 I believe. Will have to put it through it's paces if I ever get time. Thanks for comment 😀
Looking good 👍🏻
Thank you! Cheers!
replace Kato couplers,Micro Trains long shank give you more wiggle room or body mount more of your freight cars.6 axle locomotives have more overhang,causing more pressure on adjacent couplers
Thanks! That's sure what I discovered during this video content. I need to see what the long shank version of what they recommend (2004 I believe) is
Try to avoid S curves,inviting problems unless you can put a short straight between
Thanks. That is the best way to approach track building for sure. The smaller the turn radius, the worse it gets also
👍
Thanks 😊
Longer couplers on the loco(s) would help
Ok. I wonder what part number that would be 🤔. I went ahead and changed the track turnouts to normal for the back end industries. Seems fine now. Thanks for the input. I'll look into that 👍
Well don’t use that coupler lol Put a stiffer MSC Spring in it lol jk
Hey, you might be on to something!!! 😂
Promo-SM ✌️
Huh 🤔😆