วีดีโอ

@dennismarlow3830 I got a tip from a viewer that said to cover the seams up before scenery, so I just put some high strength masking tape over the seams and holes from drilling and then painted over them. I keep repaiting small places when I move track and such.

@dennismarlow3830 Thanks for commenting man. I painted right on top of the Dow Corning pink insulation foam that I got from Home Depot. They were out if 2" so I installed 2 pieces if 1" foam. Got flat one coat paint from Walmart

Thanks a lot 👌

Awesome! I usually walk and sit for a few hours when I go cause we have to stay overnight at least. Yes everybody I have met are super nice!

@@RealTalkPowersports Yea baby!!!

Come on down!

Merry Christmas to you and yours 👍👌

Thanks for watching and leaving a kind comment.

Thank ya much for watching and commenting

Thank ya much dear

Oh I know! Love it 😀 😍 ❤️

Ding ding ding

Thank you kindly

Watch the blue light flash when you throw a switch or run trains over some. If you have a booster, you probably need to raise the trip amps on it by adjusting CV49. You can go up to 6 amps without installing heat sinks. Simple instructions on PSXX1 owners manual. I do have the PSXX1 that was setup default for the Pro Cab with 2 amp trip. I raised mine just one more amp to 3 amps. No more blue limiter flashes. 👍

@@NitroStarGT Thanks, mine are all still at the default settings.

@HumancityJunction Hope ya get em bumped up a little bit. The jumper method it talks about takes soldering. The CV way is very easy. I could even do it 🤪

Thanks so much Team MSC!

Thanks for the kind comment.

Thanks Dave

Well thanks Max! 😊

Thanks for the kind comment 😀

Thanks for all the comments. Yes, the NCE equipment does build up and work well together. Good luck with your additions. I'll be watching. Iron Planet Hobbies has the DCC Concepts Alpha Meter

@NitroStarGT Thank ya Nitro Brother I found a PH-Pro out of Midwest Model they both have some good prices so does Spring Creek..

They do. I've bought items from both vendors before. I've bought from Fifer Hobby Supply also. Great fast shipping and has lots of Kato brand stuff plus MANY more

You have some good equipment! WiFiTrax 30 would be a fun addition, and the loco roster is nice. I bought the 31 before i bought the SB5, but the 30 will do the same thing if you already have the booster and save 20 or so dollars. Helps me find them WAY faster than my memory of what the exact loco numbers are! I do think having sections to power off is a great idea. I have a LOT of sections like that, but I haven't added any switches. A few locos just start up when receiving track power, and that is annoying. Thanks for watching and commenting.

Oh yea! Tell Ayden that I said "choo choo" back to him!

And I like Lightning McQueen!!!

Yes ma'am 😉

Thanks. Just running trains every now and then. Maybe your door project will make me get some scenery materials!!!!

Thank you 😊

Thanks so much! Learning a lot

Definitely. I've really got this many locos running at 1 time. If you run them fast, then you would need to run less. 4 is no problem

@NitroStarGT thanks for the info

Glad I could help

The limit is ten locomotives ,is that the limit you can have programmed ,or can you have more than 10 programmed as long as there all not running on the layout?

I'm not sure what you mean by "programmed" but whatever is sitting on powered track is going to pull power. If it is moving and sound is on, it will pull a few tenths of an amps. A power cab will power a door sized layout or larger with 5 or 6 N Scale locos running with no problem. I hope this answers your concerns

I sure thank ya. I'm having fun running trains! Thanks for watching

I agree. I just haven't planned how and started yet. Don't have a router. Haven't thought of a neat way to do it yet.

Well thank you very much!

And it's all your fault LOL 😆 😂 🤣 🙌

@@NitroStarGT I knew it lol 😂

@seanpacificrailroad3700 You were right all along, though. This Kato Daylight sounds better than the Big Boy to me! Saweet 🙂

Choo choo! 😀🙌

Oh goodness, the maximum could be many more but I have learned that too many can actually use an excess current to power all the extra wiring. A 12 gauge bus wire uses current to fill the wire up with electricity if that much draw is not needed. I chose 16 gauge bus due to that being what is recommended for N scale. This is what many TH-camrs have found out also. My feeders are from 6-8 feet apart, on the outside loops, and then there are feeders on every piece of track between turnouts and most spurs. My Power Cab has plenty of power on this 240 feet of trackage. No booster is needed either. I’ve ran 9 locos with room to spare

@@NitroStarGT thank you for the advice and response.

I have since made a new video since I found that more and more parked locos were starting to limit my Power Cab past its limits. I have since bought a SB5 booster.

The turn is Kato Unitrack 381 pieces, which are 15" radius

Glad it helps

Naw. I'm just showing that I like running trains while I race

Just a bamboo skewer. I use a Rix Pick now

Thanks for all the good comments. Yea the reverser letting g the sound work all the time is a great addition

Thanks Dave

Glad it helped ya bud

Bahahahaha. Just a quick fun vid while I was sim racing

@@RealTalkPowersports Horn is LOUD! 😆

@@RealTalkPowersports Wait till I'm off! Please bud

Thank you very much 😊

I did battle on which one to get myself. I wanted the Y6b actually but decided on the latest and greatest model 🤷‍♂️. Let me know how ya like the BLI

@@NitroStarGT Great detail and runs smooth, I am please with mine!

That's great to hear. Mine is gonna get ran about every time I go into that room so I hope it will last a long time hehehehe! Have ya tried the smoke yet on your Broadway Limited?

@@NitroStarGT I have not, it is an impressive feature especially for n scale. I had seen things online that it can potentially damage the model so I play it safe. Kato has a reputation for being strong runners, I can see it in my limited experience with them so far with the modern diesels, so I'm sure the big boy is no exception! By the way, I found you because of the DCC roundhouse video, that was extremely helpful, thanks for making that!!

@AngryDragon85 Man, that is great info. Keep running trains, and glad I could help!

Thanks

Thanks so much N-Scale 👌👍

Check out my update #15. I have the SCARM file uploaded for all to see. You can use the free version to view the layout and pieces used. I have made some changes to that exact plan but I have mentioned most of them in later videos. I wished it was easier to share a new version of the SCARM file

@@NitroStarGT thanks nitrostar