How to Replace Front Lower Ball Joint 1998-2002 Honda Accord
ฝัง
- เผยแพร่เมื่อ 18 พ.ค. 2021
- Buy Now!
New Ball Joint from 1AAuto.com 1aau.to/ia/1ASBJ00086
Modern suspensions combine a number of moving parts for safe and stable handling. The ball joint is the crucial moving component that ties those parts together. The ball-in-socket joint can wear out and loosen over time. Or, the rubber protective boot can tear, allowing contaminants to seize the joint. Bad ball joints are a common failure point on vehicle inspections because they lead to unsafe driving conditions. Fortunately, they are relatively easy to replace with the right know-how. This video shows you how to install new, quality TRQ ball joints on your 1998-2002 Honda Accord.
• Check here for more videos on the 1998-2002 Honda Accord: • Honda Accord 6th Gener...
This process should be similar on the following vehicles:
1998 Honda Accord
1999 Honda Accord
2000 Honda Accord
2001 Honda Accord
2002 Honda Accord
Tools you will need:
• Flat Blade Screwdriver 1aau.to/ooF/1AXAA00013
• Pry Bar 1aau.to/odS/1AXAA00020
• 17mm Socket 1aau.to/oow/1AXAA00015
• Ball Joint Press
• Brake Caliper Hanger 1aau.to/o3/1AXAA00084
• Straight Cutters
• Ratchet 1aau.to/opE/1AXAA00016
• Socket Driver
• Socket Extensions 1aau.to/oow/1AXAA00015
• Swivel
• Torque Wrench 1aau.to/oiA/1AXAA00044
• Block of Wood
• Paper Towels 1aau.to/obQ/1AXSS00035
• Rust Penetrant
• Center Punch 1aau.to/oav/1AXAA00055
• Floor Jack 1aau.to/oea/1AXAA00068
• Hammer 1aau.to/odN/1AXAA00091
• Jack Stands 1aau.to/odT/1AXAA00065
• Wheel Chocks
Subscribe: / @trq
Check out our playlist:
Honda Accord 6th Generation 1998-2002: • Honda Accord 6th Gener...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video. - ยานยนต์และพาหนะ
√ *Watch the Video*
√ *Buy The Part at 1A Auto* 1aau.to/m/Shop-TRQ-Parts
√ *Do it Yourself*
√ *Save Money*
Skip to 5:58 For the Annual 21st Century Fox Tribute. This is done in honor of all the movie lovers.
Who heard 20th CENTURY FOX TRUMPET INTRO WHEN HE DRILLED IN THE BALL JOINT???
i hear it now! LOL
Thank you, this video clearly and concisely got to the point, showed the little details well and didn’t waste time talking about the weather or something. Well done
+Jacob Smith Thanks for watching our video! 1aau.to/m/Shop-TRQ
Wow your Honda is actually rustier than mine. Thanks for the vid!
It was years ago but i know i replaced that ball joint on my 1998 accord v6 without any special tools at all. Thats all i remember. I never had to cut anything off. I think i used the castle nut to suck that ball joint right on into place. Losened nut back up and re tightened. Good to go.Never removed the boot either.
If you’re attempting to do this repair, one thing he forgot to mention was to install the lower ball joint snap ring. Some Acuras and Hondas Do have it, I think it depends on the model.
Great tutorial. Very much appreciated.
could that front end be anymore cruded out..? looks like a junk yard pull for practice
amazing mechanic congratulations.
Thank you 😊
You did perfectly job man.
Congratulations! Very good
Amazing video perfect thank you
This video is absolutely amazing, sauce me an apprenticeship LOL
Great video mate! 10/10
For the upper replacement would you recommend the same procedure or would you recommend buying the UCA with the included BJ already installed.
Good mechanic
Nice video - well done. I don't think removing the ball joint or pressing the new one would be any fun.
Dam change everything. That is so rusted
I like how you guys snuck on a brand new hub and didn’t say anything
greetings friend! I would like to know what number is the largest socket you used to loosen the nut in the center of the brake disc. I want to do the same job for my 2000 Honda Accord, thank you!
Did you grease the ball joint or is this obsolete for that ball joint
TRQ why are local shops telling me that this is a 3 in the half hour job?
Because they are going by what the book says and to make money
Shops will charge you for what they know and what they pay for tools they’ll never charge by hour fairly always over charge my dad owns a shop and sometimes I feel like he’s charging too much for basic stuff but it true he took the time to learn and earn his certification
Where's the snap ring that sits on top?
who is TRQ ? - i need driver side axles, are TRQ any good, who makes them?
idk if you're still reading the comments for this video but if this is a 98-02 accord what did you do to get it from 4lug to 5lug?
Replacing the wheel hub from a 4 stud hub to a 5 stud hub, and this is a whole different video you need to watch
I believe v6 models were the only 5 lug versions
Thank you very much!
@Dope Blood Wolf Did you use trq ball joints? Are they still holding up?
Does anybody know what there is to do if the nut from 1:40min doesn’t come off? It keeps spinning and spinning but not getting any looser or tighter.
Dont forget your split ring folks.
Forgot to put snap ring .
you didn't show how to put on the snap ring
I definitely would have changed those rotors and pads !
new cv-axle accompanied by an old rusty ass suspension lol
Thats one rusty accord
What is the importance of it. And why would I want to do it when replacing suspension parts ?