Merci pour ces conseils ! Je pense que l'utilisation d'une seringue aurait été plus pratique pour injecter la résine plus facilement à l'intérieur du trou.
Лучшее русскоязычное видео что нашел по ремонту доски. Спасибо! Тоже нужно поремонировать доску. А пойдет материал для ремонта бамперов? А то как у Вас не знаю даже где искать?
This is a temporarily solution and can't never work for a long time. It will cause stress on other spots of your board which will eventually result is cracks or other spots with soft deck. Curious how the condition of your board is at the moment.
not a proper repair at all. I do not recommend doing this. epoxi heats during hardening causing EPS yo melt, leaving a greater hole than before. this is widely known. the best repair is not any of these: replacing EPS and sándwich, is the only permanent safe repair.
5 mm layer of epoxy does not produce enough heat to melt eps. replacing EPS and sándwich - probably the best solution but the most complicated aswell. if you afraid about high temperature, you can fill epoxy by small portion. but i did it like in the video, and everything is perfect till today.
nice video and making. I'm going to fix my board now. see you at some surf spot !
Great tutorial! I will definitely use this. Thank you so much for making such a clear video.
Muy buen trabajo y muy clara la explicación, me resulto sumamente util. Muchas Gracias!
ok, that was the best repair video I've seen! Well done, sir! Well done!
Merci pour ces conseils ! Je pense que l'utilisation d'une seringue aurait été plus pratique pour injecter la résine plus facilement à l'intérieur du trou.
Лучшее русскоязычное видео что нашел по ремонту доски. Спасибо! Тоже нужно поремонировать доску. А пойдет материал для ремонта бамперов? А то как у Вас не знаю даже где искать?
думаю что пойдет... но не уверен. а разве стеклотакань вы не можете купить и эпоксидку для нее?
@@kvv515kvv попробую найти. Просто в автомагазинах много. Я не в морском городе живу.
Curious to know where is this mountain?
france, chamonix 😀
Great work on the video production also :)
Hello Vladimir..cool training..thanks
A question.. can i use polyurethane foam spray for filling instead of epoxy resin?
did not do it my self, but i think you can. one aspect to mention. foam will expand when become dry, so i would fill it with small portions.
прошло 5 лет, как отремонтированое место себя чувствует?
This is a temporarily solution and can't never work for a long time. It will cause stress on other spots of your board which will eventually result is cracks or other spots with soft deck. Curious how the condition of your board is at the moment.
i have sailed this board during this season at least 30 days (over thousand kilometers).
board is ok. no problem at all.
3 years later. still perfect.
no problem at all.
@@BadWithNames123 yep
Vladimir aka Count Dracula 🧛♂️😁
👍🏼👍🏼👍🏼
not a proper repair at all. I do not recommend doing this. epoxi heats during hardening causing EPS yo melt, leaving a greater hole than before. this is widely known. the best repair is not any of these: replacing EPS and sándwich, is the only permanent safe repair.
5 mm layer of epoxy does not produce enough heat to melt eps.
replacing EPS and sándwich - probably the best solution but the most complicated aswell.
if you afraid about high temperature, you can fill epoxy by small portion.
but i did it like in the video, and everything is perfect till today.
I think that adding the q-cell also helps reduce heat produced.