Hope you enjoyed it! Plastic instruments are weird. They feel like crap to play, and they're really not for performing. Here's the chorale that I attempted: musescore.com/...
I recently picked up a Yamaha YEP-201 with a case for $300 after shipping and buying a mouthpiece. For that price it comes with a lot of extras that more expensive instruments don't include, such as a series of decorative dents along one side and a broken solder joint on one support brace.
I can definitely hear the tuning issues. To me it sounds like it's just not as full, like maybe the plastic just doesn't resonate quite as much as the brass, which is also probably why it takes more air to get a good, resonating sound.
kellanflanigan, as so many recent brass developments have pretty much shot down the "if it is made of plastic instead of brass, it won't resonate properly" BS. The air column inside the tube is what is supposed to resonate. Unless the material of overly elastic, absorbing too much energy, a lot of different materials work just fine. This euphonium's issues are to be found elsewhere. I have more issues with the young fellow who made this videos. TH-cam unfortunately gives all manner of people a forum for saying anything they want, whether right or wrong, well done of garbage. And they pretty much all try to sound like experts. This fellow seems to be a high school kid, and as such is not likely to have enough knowledge or expertise to really evaluate instruments. I rather doubt that, even with his fancy microphone and headphones, he realizes that he is this badly out of tune when he recorded his multi-track closer. Having said all that, I don't want to discourage your people from contributing musically in this forum; they just should not present themselves as sage experts.
Very well done video! I wanted a plastic euphonium but was able to find a fairly new silver-plated euphonium a a pawn shop in Northern Virginia about two years ago for about $89.00!! It sounds really nice and it's beautiful when it's clean! the oils in my skin put off leave fingerprints in so many places anytime fingerprints on it touch or use it! I wish I could stand to wear gloves so I could put on some black of white parade gloves like I wore in marching band in HS because I'm sure my skin oils are gonna damage the finish if I don't keep cleaning it after EVERY use!
We bought one of these - within 2 months the valves stick so bad that you literally have to pry them out. Tried to talk to the company and just get the run around. We are not happy at all and would advise against buying one!
Thanks man! This really helped with my dicision between buying a new plastic or used brass, since they seem around the same price. I used to have a nice silver nickel 4button baritone before I sold it for college. Just want one to play around with at home again.
I think it would take a fairly long constant exposure to dezincify brass to any degree. The issues I had with the cheap Chinese bugle was heavy green growth in a few areas that when buffed off actually left damaged metal/pits in a couple of areas that were not significant to the structural integrity of the metal but were quite cosmetically disfiguring. If I got a cheap $100 or less brass trumpet I would certainly never leave it outside even under the covered dodger like I have with that $20 bugle. It is so cheap even the mouthpiece is stamped metal. It's almost impossible to play well. I don't think I would even think of bringing anything but a plastic euphonium onboard due to the higher cost/value and I couldn't just leave it strapped to a bulkhead for fear of denting it with other crap that sometimes gets tossed around in a small ocean-going boat. It would need to be in a real instrument case and those are so much bigger than the instrument itself. I did get away with carrying my baritone bugle in a duffle bag for years going to practices strapped to my motorcycle back seat or sometimes using a shoulder strap. I never could find a backpack that would fit it well. The horn never got damaged on the motorcycle. Not like the typical wear and tear on a marching instrument.
Thanks as a Forced Euphonim player I enjoyed your videos showing my kids what I used to play. I'm thinking about getting one for my kids until I saw the price maybe I could 3d print it
I live on a boat and want to get back into playing. I used to play trombone, bass trombone and euphonium in High School and college and also marched in the Madison Scouts drum & bugle corps where I played baritone bugle. I also picked up a borrowed trumpet a few times here and there to play with a pep band at ball games. Folks are a lot more willing to lend out a trumpet than a Euph or slide trombone to someone they don't know all that well. Anyhow that is 25 years ago now but recently I picked up a cheap military knock-off bugle and have been playing around with it and now I want to get back into playing a brass instrument. That brass bugle has already seen some cosmetic damage from saltwater apparently touching it so I'm a little bit concerned with a quality (expensive) brass instrument. I'm thinking trumpet because we really don't have much room although with a plastic instrument I could just strap it to a bulkhead as "artwork" and not have to worry about a case or any storage damage like that. Then again if I buy a cheap used trumpet I could probably find one for under $100 easily or the Ptrumpet for about $150. If I really get back into it I could always buy a used plastic euphonium or trombone with F-key. It's been so long it will be like starting from scratch again.
In your case, I would probably recommend a plastic instrument, as exposure to sea water can actually erode the zinc contained in brass. It would also be a good idea to get a metal mouthpiece along with a plastic instrument.
as long as you have a baritone/euph mouthpiece you'd be able to learn. The main difference is that you would need to relax waaaaaay more to play with a nice tone. If you want to, I say go for it.
Thanks for the tips about the horn. You have good enunciation! I could understand every word. That is rare these days. Concerning your valve issue, you might want to carefully use a hair drier or some really hot water and apply some heat very directly to each tightening nut, with an eye toward getting the nut to expand ever so slightly. It should come loose.
I've recently gotten a Vibrato alto sax in a trade. It's clear acrylic with silicone pads, so I think it's suitable for use at a water park or during rain storms. But anyway, it does sound pretty good, surprisingly. There are other plastic instruments around, and other than the fact the colors cause them to stick out like a sore thumb, seems they would be OK for marching band, or due to weight, smaller children could handle them more easily. I've got 60 years of playing behind me. I'm not going to be too quick to turn my nose up at these instruments. But like you said... price. I also recently picked up a near new Selmer student alto sax for $150. No dents, no scratches.
I've played most of the brass instruments since I was 6 but when I was about 8 I got a plastic trumbone and I think that's the reason foe plastic instruments who would want to by a brass instrument just fore the kid to drop and dent it and it might be a bit heavy fore some kids with real brass I currently play euphonium an it is heavier then the tuba I played fore a few years.
I would entirely suggest plastic for novelty and durability purposes. If you're in a situation where you want to have loud brass sounds to you, also damages to an instrument or people are possible, I would recommend a plastic horn. Two situations where I wanted a plastic instrument, but didn't have one were: being part of a pep band for a soccer team (trombone was hit on the side and dented), and going to protests with a brass instrument (nothing happened, but in retrospect, something *could* have happened).
hey buddy, you can use tensile and compressive elements in structure to reduce resonance on the valves from mechanical movement. like you could push short bits of chopsticks between them, then tie it tight with string. if this damping is placed in the middle of the valve, harmonics on the plastic tube are cancelled in the same way as any other linear harmonics. (i've made synthesizers/acoustic models for decades, i'm still waiting for affordable instrument options, ty for vid).
Clef doesn't matter, but yes. I've seen a few examples of Euphoniums in 8'C. The only one that's really common is that goofy Jinbao Rotary Euphonium that everyone hates.
I use a plastic Trombone to teach my private students, but I would not use one of these for a performance. The valved plastic instruments have not been perfected yet and the valves stick like you said in the video. A slide is definitely easier to duplicate with plastic than a valve. The intonation of the plastic instruments is not good and the lower tones are more difficult to produce. A used brass instrument is the way to go for sure. Thanks for sharing this review.
As a newbie I wouldn't dare to buy a used brass instrument because I'm unsure if dings and dents will influence the playability or sound? Would be cool to see a video about 'damaged brass: what's tolerable or not'
Dents will only affect playability when they start significantly blocking air flow. Generally, if the instrument has "only a few minor dings and dents" then it's fine. It would have to be a huge dent that makes you go "wtf happened" for it to affect playability.
Gear4Music’s Playlite model makes a much better hybrid plastic Euphonium for $270. Sure it’s not too viable for soloing Euphonium, but if you’re like me and play Euphonium as a second instrument then go for plastic.
Buy a used instrument and then send it to a reputable repair shop to have it fixed up, if it needs to be. You can always find a used instrument online. I got two 1920s era King Baritones for $30 a piece. They need work, but they are still playable. Even if I spent $600 to have them fully repaired, Its still way less than the $2000-3000 for a new instrument.
Plastic instruments have their place, certainly. But for just a few hundred more, you can get $1000 Mack Brass euphonium. From China, excellent copy of the Yamaha 642 compensating horn. For some reason, euphoniums from China are much, much cheaper, then any other brass instrument from China. Chinese trimbones cost about 1/2 of the brand copied , while euphoniums are about a 6th!
From experience teaching plastic cornets, they also smelt very mouldy within a few weeks of use. I would never buy nor recommend a plastic brass instrument.
Plastic will never take-off in top-class bands. A player has to make changes (compensate) with the Embouchure just to accommodate the tuning in almost every range. Intonation can suffer (badly) and these are the kinds of things you don't want to have to worry about with the likes of Cory band et al! It may slightly improve tongue speed (marginally) and I don't understand that but overall, a good old 10+ year old brass/metal instrument (Besson et al) in good condition, will be a much better buy in any band in any section. Just to add, you covered the points wonderfully well young man, well done, particularly that you *do* need to push a higher-level of air through the instrument, with the consequent loss in overall tone/intonation?
A couple of more questions. 1) Is the Kaizer plastic euphonium the same instrument as the Cool Winds plastic euphonium? In photographs they appear to be identical, right down to the fine details. 2) The valve casings are plastic. Are the interior valve parts metal? Thanks.
1. I'm pretty sure it is the same as the Cool Winds euphonium, they do look extremely similar except for the color of the water keys. 2. Both the valves and the valve casing are actually made of metal. They're still not any good but they are metal.
@@Bennim I'm thinking about buying one. I already have a good brass 4 valve compensating euphonium, but a red plastic one might be fun to play at Tuba Christmas events, or outdoors in bad weather.
I think that's a fair reason for wanting a plastic instrument. They are pretty good for playing outdoors and the bright colors will certainly be nice for tuba Christmas!
Can little slanted pieces be put inside of all of the 90° turns to fix some of the sound issues? If someone had a new model (where the buttons arent stuck yet) could the buttons be replaced with brass ones?
Putting small pieces inside of the turns in the tubing would likely thin the air flow and cause more problems. As for the valves, you could probably replace them for ones made of a better material so they don't become slow, but that would require a LOT of modding for them to fit perfectly on the instrument
Well, it DOES put the "phoni" in euphonium, and I can certainly hear the tuning limitations, but if you had to carry a euphonium into battle or a swimming-pool situation, this would be the best choice.
I don't think you can find used ones of brass at a cheaper price that are higher quality....like compensating ones or 4th key sones though.....3 key normies are just as bad as this given same price but you get a plastic compensator no?
If your director approves of it, then yes. Plastic instruments are great for marching band because they are very lightweight and durable. The only thing is that they may not be able to produce as much sound as a brass instrument, which I've learned is very important for marching band.
but if youve never played one before and want to try it out its the best option you dont really want to spend the best part of a grand on a brass one and find out its not for you at least with this for 100 or so its the best option for a first time player, just like a guitarist the first guitar any guitarist gets is always a piece of shit but it gets you playing.
Besides this one particular instrument, which is clearly a POS, what other plastic instruments have you tried? Most plastic instruments are underrated. I've got a plastic clarinet from the JCPenney catalog. It plays better than my $4000 Buffet.
Personally, I dislike the color, it makes the instument looks like a toy. I think white is better and less disturbing. I myself learn flute and recorder. Plastic recorders are everywhere and high-quality one is always colored black, brown or something resembles wood, while the pink one is always the lower quality.
I have to agree with you on this one. Plastic brass instruments in general usually have very bright colors, and it's very hard to make them not look like toys.
I’m sure it’s not you but the instrument sounds like a middle school band. I don’t think I could ever get this instrument just cuz my love for euphonium is from the tone itself, and this one sounds yucky
I got mine used and it didn't come with a mouthpiece so I'm using my own metal one, I'm pretty sure if you got one new it would come with a garbage plastic mouthpiece.
Your presentation can be more exciting.Please follow the principle HEAR DO SEE....when introducing anything related to music...a demo on an unconventional instrument even more important ...play the damn thing first....let the instrument speak to your audience, we are not interested in your thoughts.Then follow up with a few of your own comments, experiences etc...then explore the range etc...have a threefold plan....sound , narration or talk , sound to conclude your presentation.Please it is very irritating listening to guys talking their way through a demonstration...of a musical instrument
I recently picked up a Yamaha YEP-201 with a case for $300 after shipping and buying a mouthpiece.
For that price it comes with a lot of extras that more expensive instruments don't include, such as a series of decorative dents along one side and a broken solder joint on one support brace.
Had us in the first half
Not gonna lie
i love the yep 201, we've got one at school and it's just amazing
They’re features, not bugs!
A broken solder joint on a bass brass instrument must cause a lot of buzzing! Do you have any problems like that?
Sounded a million times better than what I was expecting to be honest 😂😂
Same
I can definitely hear the tuning issues. To me it sounds like it's just not as full, like maybe the plastic just doesn't resonate quite as much as the brass, which is also probably why it takes more air to get a good, resonating sound.
kellanflanigan, as so many recent brass developments have pretty much shot down the "if it is made of plastic instead of brass, it won't resonate properly" BS. The air column inside the tube is what is supposed to resonate. Unless the material of overly elastic, absorbing too much energy, a lot of different materials work just fine. This euphonium's issues are to be found elsewhere.
I have more issues with the young fellow who made this videos. TH-cam unfortunately gives all manner of people a forum for saying anything they want, whether right or wrong, well done of garbage. And they pretty much all try to sound like experts. This fellow seems to be a high school kid, and as such is not likely to have enough knowledge or expertise to really evaluate instruments. I rather doubt that, even with his fancy microphone and headphones, he realizes that he is this badly out of tune when he recorded his multi-track closer. Having said all that, I don't want to discourage your people from contributing musically in this forum; they just should not present themselves as sage experts.
If the question includes “Kaiser-red Euphonium?” The answer is “Yes. Always, yes!”
Do you hate the Kaiser-red Euphonium?
Very well done video! I wanted a plastic euphonium but was able to find a fairly new silver-plated euphonium a a pawn shop in Northern Virginia about two years ago for about $89.00!! It sounds really nice and it's beautiful when it's clean! the oils in my skin put off leave fingerprints in so many places anytime fingerprints on it touch or use it! I wish I could stand to wear gloves so I could put on some black of white parade gloves
like I wore in marching band in HS because I'm sure my skin oils are gonna damage the finish if I don't keep cleaning it after EVERY use!
Those valves would give me a headache...
We bought one of these - within 2 months the valves stick so bad that you literally have to pry them out. Tried to talk to the company and just get the run around. We are not happy at all and would advise against buying one!
@LaserActiveGuy I've read that using actual vegetable oil out of your cabinet works really well, too.
Sorry this guy has only 150 subscribers? *I need an explanation*
Well maybe if he played it he would have more suba
@@bun-bun5623he did goofy
Thanks man! This really helped with my dicision between buying a new plastic or used brass, since they seem around the same price. I used to have a nice silver nickel 4button baritone before I sold it for college. Just want one to play around with at home again.
Thank you, my Euphonium Brother, may Brassedion bless your day ♥
For all of those who value time 6:16 is when he starts playing
Thank you
thanks
thank you I was getting tired of listening to this guy yap
That's a bit of a rude way to put it...
*clicks timestamp*
6:13 Finally! Play the damn thing! lol
I think it would take a fairly long constant exposure to dezincify brass to any degree. The issues I had with the cheap Chinese bugle was heavy green growth in a few areas that when buffed off actually left damaged metal/pits in a couple of areas that were not significant to the structural integrity of the metal but were quite cosmetically disfiguring. If I got a cheap $100 or less brass trumpet I would certainly never leave it outside even under the covered dodger like I have with that $20 bugle. It is so cheap even the mouthpiece is stamped metal. It's almost impossible to play well.
I don't think I would even think of bringing anything but a plastic euphonium onboard due to the higher cost/value and I couldn't just leave it strapped to a bulkhead for fear of denting it with other crap that sometimes gets tossed around in a small ocean-going boat. It would need to be in a real instrument case and those are so much bigger than the instrument itself.
I did get away with carrying my baritone bugle in a duffle bag for years going to practices strapped to my motorcycle back seat or sometimes using a shoulder strap. I never could find a backpack that would fit it well. The horn never got damaged on the motorcycle. Not like the typical wear and tear on a marching instrument.
I need that valve clonk sound on my mechanical keyboard
The timbre was impressive but the pitch even against itself is rough
I noticed that too.
Thanks as a Forced Euphonim player I enjoyed your videos showing my kids what I used to play. I'm thinking about getting one for my kids until I saw the price maybe I could 3d print it
when it was posted on April 1st I thought it was a joke
I live on a boat and want to get back into playing. I used to play trombone, bass trombone and euphonium in High School and college and also marched in the Madison Scouts drum & bugle corps where I played baritone bugle. I also picked up a borrowed trumpet a few times here and there to play with a pep band at ball games. Folks are a lot more willing to lend out a trumpet than a Euph or slide trombone to someone they don't know all that well.
Anyhow that is 25 years ago now but recently I picked up a cheap military knock-off bugle and have been playing around with it and now I want to get back into playing a brass instrument.
That brass bugle has already seen some cosmetic damage from saltwater apparently touching it so I'm a little bit concerned with a quality (expensive) brass instrument. I'm thinking trumpet because we really don't have much room although with a plastic instrument I could just strap it to a bulkhead as "artwork" and not have to worry about a case or any storage damage like that.
Then again if I buy a cheap used trumpet I could probably find one for under $100 easily or the Ptrumpet for about $150. If I really get back into it I could always buy a used plastic euphonium or trombone with F-key.
It's been so long it will be like starting from scratch again.
In your case, I would probably recommend a plastic instrument, as exposure to sea water can actually erode the zinc contained in brass. It would also be a good idea to get a metal mouthpiece along with a plastic instrument.
I'm here before this channel explodes.
I paid less for a used Jupiter student baritone than that plastic horn.
Today I learned! thank you
Bennim!
why do u only have 300 subs?u deserve more ngl
Thanks floppa
Honestly I would get it just to mess around with after having my own brass but I’m a trumpet player so I’m not sure if it’s the same
as long as you have a baritone/euph mouthpiece you'd be able to learn. The main difference is that you would need to relax waaaaaay more to play with a nice tone. If you want to, I say go for it.
Thanks for the tips about the horn. You have good enunciation! I could understand every word. That is rare these days.
Concerning your valve issue, you might want to carefully use a hair drier or some really hot water and apply some heat very directly to each tightening nut, with an eye toward getting the nut to expand ever so slightly. It should come loose.
I've recently gotten a Vibrato alto sax in a trade. It's clear acrylic with silicone pads, so I think it's suitable for use at a water park or during rain storms. But anyway, it does sound pretty good, surprisingly. There are other plastic instruments around, and other than the fact the colors cause them to stick out like a sore thumb, seems they would be OK for marching band, or due to weight, smaller children could handle them more easily. I've got 60 years of playing behind me. I'm not going to be too quick to turn my nose up at these instruments. But like you said... price. I also recently picked up a near new Selmer student alto sax for $150. No dents, no scratches.
I've played most of the brass instruments since I was 6 but when I was about 8 I got a plastic trumbone and I think that's the reason foe plastic instruments who would want to by a brass instrument just fore the kid to drop and dent it and it might be a bit heavy fore some kids with real brass I currently play euphonium an it is heavier then the tuba I played fore a few years.
I own a “StarTone” Bb euphonium and it is pretty much exactly the same but it is blue.
Cool video Bennim. The red is pretty though
Plastic valves are a disaster.
The valves and valve casing on this instrument are actually made of metal, but they are still a disaster.
I would entirely suggest plastic for novelty and durability purposes. If you're in a situation where you want to have loud brass sounds to you, also damages to an instrument or people are possible, I would recommend a plastic horn. Two situations where I wanted a plastic instrument, but didn't have one were: being part of a pep band for a soccer team (trombone was hit on the side and dented), and going to protests with a brass instrument (nothing happened, but in retrospect, something *could* have happened).
The valve cap issue is true for almost every plastic brass instrument lol
Man, those valves are crunchy
To help with those loud and less functioning valves, put some water on it, over yime it will make less noise and alide easier
hey buddy, you can use tensile and compressive elements in structure to reduce resonance on the valves from mechanical movement. like you could push short bits of chopsticks between them, then tie it tight with string. if this damping is placed in the middle of the valve, harmonics on the plastic tube are cancelled in the same way as any other linear harmonics.
(i've made synthesizers/acoustic models for decades, i'm still waiting for affordable instrument options, ty for vid).
As oddity2994 i can confirm that this is an oddity
6:14 if titanic 2 came this should be the next musician's in titanic two
There are technically euphoniums in C if the musician reads treble like myself.
Clef doesn't matter, but yes. I've seen a few examples of Euphoniums in 8'C. The only one that's really common is that goofy Jinbao Rotary Euphonium that everyone hates.
No, I would be 99.99% certain that your euphonium is in B-flat! Treble or bass, it’s just a different way of notating.
I use a plastic Trombone to teach my private students, but I would not use one of these
for a performance. The valved plastic instruments have not been perfected yet and the
valves stick like you said in the video. A slide is definitely easier to duplicate with plastic
than a valve. The intonation of the plastic instruments is not good and the lower tones
are more difficult to produce. A used brass instrument is the way to go for sure.
Thanks for sharing this review.
Does valve oil and slide grease eat away at the plastic
The valves on the inside are actually made of metal, and in my experience slide grease should be fine with the plastic slides.
@@Bennim thank you
he plays it at 6:15, for anyone wondering
As a newbie I wouldn't dare to buy a used brass instrument because I'm unsure if dings and dents will influence the playability or sound?
Would be cool to see a video about 'damaged brass: what's tolerable or not'
Dents will only affect playability when they start significantly blocking air flow. Generally, if the instrument has "only a few minor dings and dents" then it's fine. It would have to be a huge dent that makes you go "wtf happened" for it to affect playability.
I play the euphonium, it’s fun
And band teacher said we sounded the best in the whole brass band
lol the video was started with the most true statement ever 😂
Gear4Music’s Playlite model makes a much better hybrid plastic Euphonium for $270. Sure it’s not too viable for soloing Euphonium, but if you’re like me and play Euphonium as a second instrument then go for plastic.
I recently purchased a John Packer JP374s for $500.00. If you hunt around,you can find a great instrument at a great orice
every time i thought he was bouta play he puts it down and says more words
You know it they chrome plated the pistons and valve casing they might be on to something.
6:13 to hear it played.
Can't hear the valves when you're playing, but them getting stuck is an absolute dealbreaker.
ok I know it's a euphonium "in Bb" but euphoniums are either always or typically non-transposing
Buy a used instrument and then send it to a reputable repair shop to have it fixed up, if it needs to be. You can always find a used instrument online. I got two 1920s era King Baritones for $30 a piece. They need work, but they are still playable. Even if I spent $600 to have them fully repaired, Its still way less than the $2000-3000 for a new instrument.
Bro was just yapping for 6 minutes strait before he played it
i wonder if one could 3d print an euphonium...
Someone 3D printed an alto trombone before. It was awful but still.
This is where science goes too far
bro really said "🤖"
I have a concert pitch euphonium
Bought a King Baritone with case and mouthpiece for $150 on eBay.
Plastic instruments have their place, certainly. But for just a few hundred more, you can get $1000 Mack Brass euphonium. From China, excellent copy of the Yamaha 642 compensating horn. For some reason, euphoniums from China are much, much cheaper, then any other brass instrument from China. Chinese trimbones cost about 1/2 of the brand copied , while euphoniums are about a 6th!
Probably three quarters cadmium by weight!
Somebody should make a E flat or F euphonium just to make one.
In my school there was little euphoniums en D flat, but they have an other name 😶
They do. Called tubas if lower or tenor horns if higher!
From experience teaching plastic cornets, they also smelt very mouldy within a few weeks of use. I would never buy nor recommend a plastic brass instrument.
This guy gets everything I said
That sound way better than I though lol😅
Oh my - the intonation - or lack of it...help! (certainly not your fault)
I think it Might be lightweight and durable idk tho
I dare you too play Endearing Young Charms on it.
Plastic will never take-off in top-class bands. A player has to make changes (compensate) with the Embouchure just to accommodate the tuning in almost every range. Intonation can suffer (badly) and these are the kinds of things you don't want to have to worry about with the likes of Cory band et al! It may slightly improve tongue speed (marginally) and I don't understand that but overall, a good old 10+ year old brass/metal instrument (Besson et al) in good condition, will be a much better buy in any band in any section.
Just to add, you covered the points wonderfully well young man, well done, particularly that you *do* need to push a higher-level of air through the instrument, with the consequent loss in overall tone/intonation?
A couple of more questions. 1) Is the Kaizer plastic euphonium the same instrument as the Cool Winds plastic euphonium? In photographs they appear to be identical, right down to the fine details. 2) The valve casings are plastic. Are the interior valve parts metal?
Thanks.
1. I'm pretty sure it is the same as the Cool Winds euphonium, they do look extremely similar except for the color of the water keys.
2. Both the valves and the valve casing are actually made of metal. They're still not any good but they are metal.
@@Bennim Thanks.
@@Bennim I'm thinking about buying one. I already have a good brass 4 valve compensating euphonium, but a red plastic one might be fun to play at Tuba Christmas events, or outdoors in bad weather.
I think that's a fair reason for wanting a plastic instrument. They are pretty good for playing outdoors and the bright colors will certainly be nice for tuba Christmas!
Sure brass instruments are expensive, but have you seen saxophones?
yeah i play tenor sax but i recommend eastrock saxes b/c i got mine for only 350$
Baris are like 3k minimum lol
I play that instrument the metal one
Can little slanted pieces be put inside of all of the 90° turns to fix some of the sound issues?
If someone had a new model (where the buttons arent stuck yet) could the buttons be replaced with brass ones?
Putting small pieces inside of the turns in the tubing would likely thin the air flow and cause more problems. As for the valves, you could probably replace them for ones made of a better material so they don't become slow, but that would require a LOT of modding for them to fit perfectly on the instrument
just need stronger pop up springs in the valves! will be faster then
6:15
Is when he actually plays it.
Well, it DOES put the "phoni" in euphonium, and I can certainly hear the tuning limitations, but if you had to carry a euphonium into battle or a swimming-pool situation, this would be the best choice.
So basically like a modern-day bagpipe?
Where did u find one
I remeber this from my school marching band days. Do they have a real purpose for this instrument in professional settings
I hate almost all plastic instruments except for flutes the trumpet player. It looks like it's gonna break if it touches the floor.
I don't think you can find used ones of brass at a cheaper price that are higher quality....like compensating ones or 4th key sones though.....3 key normies are just as bad as this given same price but you get a plastic compensator no?
Would a plastic instrument be good for marching band?
If your director approves of it, then yes. Plastic instruments are great for marching band because they are very lightweight and durable. The only thing is that they may not be able to produce as much sound as a brass instrument, which I've learned is very important for marching band.
A lot of band directors would dislike that because the bright color would disrupt the uniformity of the band
@@bigfootsburneraccount9160 That is certainly true. Personally, my band director would have _never_ let us use a bright-colored plastic instrument.
It can only sound as good as the player.
Do big bands in China have a plastic section?
That's foul😭😭
but if youve never played one before and want to try it out its the best option you dont really want to spend the best part of a grand on a brass one and find out its not for you at least with this for 100 or so its the best option for a first time player, just like a guitarist the first guitar any guitarist gets is always a piece of shit but it gets you playing.
Besides this one particular instrument, which is clearly a POS, what other plastic instruments have you tried? Most plastic instruments are underrated. I've got a plastic clarinet from the JCPenney catalog. It plays better than my $4000 Buffet.
I also have a plastic trombone from pBone, it's honestly pretty good.
wait wait wait wait Wait... your telling us that if you slightly tighten the valves too much you can't untighten them??
French horn and trombone sound better try those
ITS CALLED A BARITONE
it has multiple aliases, good luck with that
Personally, I dislike the color, it makes the instument looks like a toy. I think white is better and less disturbing.
I myself learn flute and recorder. Plastic recorders are everywhere and high-quality one is always colored black, brown or something resembles wood, while the pink one is always the lower quality.
I have to agree with you on this one. Plastic brass instruments in general usually have very bright colors, and it's very hard to make them not look like toys.
Just think, a plastic band.
So the answer to the question is no, they are not viable.
IT’S A FUCKING TUBAAA
Isn’t that a baritone?
I’m sure it’s not you but the instrument sounds like a middle school band. I don’t think I could ever get this instrument just cuz my love for euphonium is from the tone itself, and this one sounds yucky
Why so many flats? Must you make my life depressing?
Who makes that plastic piece of crap and why would I want it?
too flat...ya these instruments out of brass are always too sharp lower down hmmmm
That’s a baritone. Not a euphonium
No, it is a euphonium.
audacity
Yes, jasper. I used audacity.
Referring to the computer screen?
God it sounds like a dying whale
Then what is the mouthpiece? Metal. Its not pladtic
I got mine used and it didn't come with a mouthpiece so I'm using my own metal one, I'm pretty sure if you got one new it would come with a garbage plastic mouthpiece.
It plays so grossly out of tune, worse than a valve/rotor bugle. Why would you want to practice playing out of tune?
Sounds like an out of tune French horn
Your presentation can be more exciting.Please follow the principle HEAR DO SEE....when introducing anything related to music...a demo on an unconventional instrument even more important ...play the damn thing first....let the instrument speak to your audience, we are not interested in your thoughts.Then follow up with a few of your own comments, experiences etc...then explore the range etc...have a threefold plan....sound , narration or talk , sound to conclude your presentation.Please it is very irritating listening to guys talking their way through a demonstration...of a musical instrument
what lame efforts did you have to get at the valves? are you incompetent?