15 EDC Utility Knives Compared: Which Is the Best?
![Best Damn EDC [Taylor Martin]](http://yt3.ggpht.com/C23xT4qXAgWe_wPaHXS9N0UNliYR1ZaNyf2qXLCt2WaRpVKD802vEiMatltiOU_6T3ohYkQK4g=s48-c-k-c0x00ffffff-no-rj)
ฝัง
- เผยแพร่เมื่อ 23 ก.ค. 2024
- My current EDC edcm.xyz/august-edc
Join the Discord server / discord
Submit your EDC! edcw.co
What's the best EDC utility knife? That's up for you to decide. But I spent the last several weeks acquiring and using a handful of the utility knives best suited for everyday carry. Here are my thoughts on all of them.
- Big Idea Design TPT (Titanium Pocket Tool) amzn.to/2xav4ns
- Big Idea Design TPT Slide edcm.xyz/tptslide
- Rexford RUT edcm.xyz/rexfordrut
- Gil-Tek RUK (Coupon code BESTDAMNEDC for 25% off) edcm.xyz/gil-tek
- Gerber EAB amzn.to/2NC9HWi
- Gerber EAB Lite amzn.to/2x91cI7
- WORKPRO Folding Utility Knife amzn.to/2p4DYzg
- Mossy Oak Folding Utility Knife amzn.to/2xcOaJD
- Milwaukee Fastback Flip amzn.to/2OcXnc5
- Milwaukee Fastback Compact Flip amzn.to/2x92l2o
- Outdoor Edge RazorLite EDC amzn.to/2NCaEhj
- Screwpop amzn.to/2x8Qhhv
- Backnife edcm.xyz/backnife
- OLFA 26B amzn.to/2OfX8wM
- Outdoor Edge Slidewinder amzn.to/2x929jG
- YEEYOU Utility Knife amzn.to/2x980W1
- Stanley QuickSlide amzn.to/2NCIKBJ
- Maker Knife edcm.xyz/maker-knife
7 Reasons Why You Should EDC a Utility Knife • 7 Reasons Why You Shou...
More EDC Weekly
www.youtube.com/watch?v=4qza3...
EDC Unboxings
www.youtube.com/watch?v=65DVr...
The Best Everyday Carry Gear
www.youtube.com/watch?v=szRl7...
Follow Best Damn EDC:
/ bestdamnedc
/ bestdamnedc
/ bestdamnedc
Follow Taylor:
/ caspertek
/ caspertek
~-~~-~~~-~~-~
Send interesting or new EDC gear:
Taylor Martin
P.O. Box 102
Concord, NC 28026
Due to overwhelming demand, sending gear does not guarantee coverage.
~-~~-~~~-~~-~ - แนวปฏิบัติและการใช้ชีวิต
I have used the Gerber for a while at work and love it. I use the back of the replacement blade to take the screw out.
I use the Gerber too, an at times break down boxes an it preforms great an love the poket clip
Idk why he’s complained about the screw to get the blade out when he has like 100 tools for that job hahah
Yeah, I suppose it's worth noting that blade replacement requires a tool, but....
Really, that's a minor downside at most, and probably worth it for the non-rattley blade.
Ok so I’ve used the gerber for years and after two years I found out if you push down on the pocket clip right on the hump where is has the GE in gerber and then push up as you push down with your thumb the clip will come out and you can use that as the screw driver for the blade and then it just pops back into place once you are done. I’ve been doing this every time I change blades for around 3 years now and the clip still goes back into place and doesn’t come out on accident.
You can get an aftermarket nub screw instead of the flathead screw it comes with.
THANK YOU!!!
Most comprehensive and informative utility knife review I've seen (and I've seen a LOT.)
The large fastback is amazing, I’m a plumber and use it probably 10-15 times a day, I liked it so much I actually bought 6 more just Incase they discontinue them. For tradesmen, the fastback is invaluable.
"I don't know why something you would use on a worksite would have a bottle opener"
*Laughs in Australian*
Laughs in America must have never been in on a job site
I don't know why anyone needs a bottle opener. The side of any table or hard surface is sufficient.
Laughs in Mexican 😂
You can tell he has never worked with his hands. They look baby soft and comments like that say it all.
@@basanistes359exactly what I was to write. Place edge of cap over edge of a hard wooden surface, slightly tilt the bottle away from table, light karate chop on the free side of cap and you can open any bottle in the world.
Thanks a bunch! Loved this! Ordered a TPT slide a while ago and I'm looking forward to it!
The eab lite might be inconvenient to change blades but that blade is held rock solid. Definitely my favorite of all of them.
If you're swapping out a blade on the Gerber then use the back of the utility blade you're swapping in to unscrew the screw.
My Fortress Construction I carry a NiteIze Dohickey on a necklace, so blade changes/flips are not a problem.
I almost never flip the blade with my Gerber. Idk why but I feel like part of the already used half will now be sticking out into the usueable area. But I'm picky and weird and razor blades are cheap. Also, in a pinch, although your ideas if using the new blade as a screw driver, a dime fits PERFECTLY.
You can also go to the hardware store and replace it with a knurled hex screw that looks like this [||||]======. That's what I did to my 99E and it was the best mod ever. Gonna do it to my EAG when it comes in.
@@gahbah274 cheers fam
I'm a lineman, so most of my tools are Klein. I was in a supply house a couple months ago and I was playing around with a Klein assisted opening utility knife, and needless to say it came with me. I carry it everyday at work, and it is absolutely my favorite tool. I love it so much, I ordered another one on Amazon to put in my personal tool bag at home.
I just watched a 35 min video of a guy talking about utility knives. WTF am i doing w my life...
Clearly watching informative videos on TH-cam. lol
Thanks bro, I love your EDC videos. Im a big EDC enthusiast myself. Keep pushing awesome content!
No one even notices that L I L P U M P himself is watching edc videos? He comments on such a channel?
what are you doing? Living the dream clearly
You call yourself "Lil Pump". You have bigger problems.
Damn! This is a really goood resource. I am timestamping this video.
Thank your Taylor.
1:11 Everything you will see in this video
Use the links in video description to buy.
32:26 TL;DW Recommendations
----------------
*Sensible*
2:16 Gerber EAB
3:48 Mossy Oak & Workpro Folding Utility Knife
4:56 Milwaukee Fastback
6:47 Outdoor Edge RazorLite
9:00 OLFA 26B
10:29 Stanley Quickslide
11:45 Yeeyou
13:12 Screwpop
14:41 Outdoor Edge Slidewinder
16:37 Backnife
----------------
*Are you Serious?*
18:38 Overview
20:34 Gil-Tek
23:00 Big Idea Design Titanium
25:20 Big Idea Design TPT Slide
----------------
*Burn your cash*
27:11 Rexford RUT
----------------
"Burn your cash" 😂
I found that smaller Milwaukee fast back at my local home depot for $15cad 2 years ago and picked it up immediately. I'd had the normal fastback knife twice before and loved it. I use it every night at work and it never let's me down. Works barehanded or with any size of glove. Small enough to not be intrusive but bit enough to be able to handle and use firmly. Love it.
Also, if you EDC a swiss army knife, even if it's just a little classic sd on your keys, you have a screwdriver to change blades on that gerber. Just a thought.
Keep up the vids man. They're awesome
As soon as the Prybrid became available, I jumped on two of them. This is one utility knife that can fill multiple rolls and never feel bad about doing it. Solid frame indeed. Pick one up. I carry my Prybrid now more than anything. My only gripe, they could have put a pocket clip on the back. I use to lanyard hole as its supposed to be. Para chord with a clip attached. Attach it to belt loop, set in pocket or, just let it hangout.
Hey man, glad you like the Razorlite EDC! I just got the Slidewinder in, and you're correct sir; an all metal version would be worth double the price.
Now tell us about the different blades! Someone mentioned the dual edge serrated blade was hard to find.
I carry the Gerber everyday because I prefer the screw over a quick release design. The stability is worth the extra time in my opinion. My frame lock is super stable and I have no concerns when using it.
I've carried the Gerber for several months and I love it. I always have a flathead on my leatherman so blade changes are not a problem. Definitely want to upgrade to the RUK and tbh I'd love to have them all 😍
Thank you! Just ordered the Gil-tek with your coupon. :D
Epic review, glad I stumbled upon your channel.
Watched a few of your videos today. Couldn’t not subscribe. Can’t wait for future videos 🤙🏻
On the gerber you can use the back of the blade for the screw since when your changing the blade you’ll have two one in the knife and the old or new one
Probably gonna try a RUK, the Cerakoted one. I have a Eab works good for me and I have a Screwpop for my keys. I do like carrying utility knives for simple chores which is usually all I need. I save my knives for when I'm going somewhere I see needing them. Great video looking forward to more. Cheers
I’ve used the Gerber for 2 years and love it, you can use your tape measure hook to loosen the screw
You think the “plastic” is going to wear out?
When’s the last time you wore out anything made of Zytel?
The button spring, the black slider, the main spring, the blade, both drivers, all the screws holding the thing together, and the pocket clip are going to wear out before that “plastic” does
The Outdoor Edge Razorlite is at the bottom end of a whole genre of knives - folding scalpels with various lengths and types of interchangeable blades. Havalon do the best and biggest range -- even a folding scalpel-holder incorporated into their own Leatherman-style multitool.
Great video BTW.
Great video, ordered my tpt slide the other day when i heard you mention quick in beginning of your last video, glad i went with the slide thanks
Great Video! Utility knives have put a big dent in my Spyderco EDC. If the day calls for breaking down boxes or cutting carpet the high end knives stay at home. Every time I knock the tip off a utility blade I cringe to think "glad that was not my ___________" fill in the blank $100+ blade. The other benefit is less time spent sharpening and my pocket knives are generally razor sharp when needed. Thanks for the video. (most carried utility knives Fastback in the larger version and Gerber EAB lite) : )
When I switched job, instead of the Milwaukee Switchback Gen 2 that I used to carry, I chose the Gerber Superknife. It's smaller, have better ergonomic, a deep pocket carry clip and use thicker utility blades. However, for normal days, I carry a Screewpop. Around the house, I will grab my Switchback or one of my Stanley Quickslide. Nothing fancy as it doesn't need to.
For blades, I use mostly Lenox Gold Titanium-Edge Utility Knife Blades but I recently tend to use more the Stanley Extra Heavy Duty Utility Blades. The later are 1mm thick as opposed to 0.6mm for normal blades.
Keep up your excellent work!
I use the Gerber all the time. I have used several others and the Gerber for me has been the most ergonomic and there for safer to use. I had issues either sticking my self or almost slipping forward and cutting mys self
Love the timex expedition, great edc watch and makes for a good beater too
Had to sit through my 8am class before I could watch this. Awesome video man! Now you have me looking forward to the V2 RUK, definitely agree about a needed prybar 👌
I just bought the smaller Milwaukee fastback 48-22-1906 today at Home Depot for $8.97. It was on the rack right beside the larger one and the pack you bought. I LOVE it and want to get a couple more.
Made my screwpop perfect... Put it in the oven until the oven reached 300 degrees and pulled it out. This reduced the magnet strength to the perfect amount where it wouldn't lift my flashlight (Fenix e15) like it did before but still holds the blade in place.
This video is so awesome. Nobody else ever reviewed all of them!
Really nice video! Showed some serious other options 👍
Got a Gil Tech RUK about 14 months ago and it lives on my keys, used almost everyday for something or another.
Just bought the Gerber EAB with the plan to replace the blade retention screw to one that is a hair longer to make it easier to replace the blade on the fly, and also double as a thumb stud. See how that works out. thanks for the great work and greetings from Sweden.
I was gonna do that, but I figured that would be "too close" and I wouldn't be able to bend my old thumb in that far. I opted to drill and tap a hole for a 6-32 cap screw and loc-tited it in. Works well. In the process, though I discovered the blade retention screw is a 3mm, 0.5 pitch FYI. Hardware store here didn't have that in a cap screw.
My Milwaukee Fastback 48-22-1502 in a nutshell is absolutely perfect for me, especially for the $10 price tag. I have the entire Fastback line and this is my favorite! Blade extraction is butter smooth, tape measure guide, 2 different wire/rope cutting locations so the blade doesn't dull in the same location, bottle opener, magnetic xtra 5 blade storage compartment, lanyard hole, metal outer shell. This Fastback utility knife is extremely rugged, ergonomic and its safety features never interfere with it's operations. It's now part of my EDC.
Job well done Milwaukee!
Man, I love this channel! 👌🏼
Just Ordered the Outdoor Edge Slidewinder in Blue... I actually like the look of the Plastic on the Side. Just a little knolife for opening Packages etc.
Good Review Bro. 🔪😎👍🏼
Taylor, great product review. Also check Havalon knives. They specifically use interchangeable blades. I got one years ago for under 50. Excellent knife to have.
I've been been using the Gerber eab for like 10 years, lost my 1st so bought another one. I live that thing
just ordered the TPT Slide with your Link, I also have some partially serrated blades coming for it
I like the little ones, like the plastic one. Titanium ones I bet they're awesome. Thanks for the heads up, first time seeing the tiny ones
I know I'm late to the party, I just ordered the RUK V2 in brass and I can't wait for it to get here. I think it will go great with my EDC Knife, the Kershaw Natrix in copper.
Ordered the TPT Slide this morning, went straight for the big bucks.
As someone who always carries a pocket knife I absolutely would love the EDGE RAZOR KNIFE WITH THE 3.5" BLADE!!!! Blade gets dull change it out! 👍
You're absolutely right about the slidewinder, if they made it a $20-$30 tool it could be so much better. My main issue is it takes no pressure at all on the button to retract the blade. I've since taken it apart, bent the leaf spring a tiny bit more and deepened the channel that the button falls into to keep the blade open, and that did make it much better.
I've had the full size Fastback for a long time, and use it in the shop a lot. I just picked up the compact fastback at Home Depot and have been carrying it the last few days. Love it. I am thinking about trying to make some custom scales for it though. I love Milwaukee, but the bright red is maybe a little too intense for everyday use.
I use the fastbacks strictly and I haven’t been able to find a decent machined one I like :/ I’ll just keep looking.
The smaller Milwaukee can be purchased separately. They are less then $10 at my local HD.
I was actually able to find the small fastback in store at a home depot near me I think it was 10 or 12 dollars on its own. I carry cause sometimes I prefer a thinner blade for fine cutting and opening packages and the a regular blade for heavier cuts or tasks.
Great video. My favorite so far.
Subbed a few days ago to be sure to see this video, am not disapointed. Have been enjoying your other vids in the meantime.
Enjoining your channel. I was carrying the Gerber EAB for years. And yes, used it as a money clip. I needed to change it up. I bought the Yeeyou. It felt sold. But also heavy. The discomfort in the hand with the glassbreaker was deal breaker for me. They should have made a flathead screw driver instead. I also have the Slidewinder. It’s my EDC. I like that it’s light weight and the tools. It does function as a money clip as well. I agree about changing to all metal. But would make it heavier.
Been waiting for this one!!!! Loving my Gil-Tek RUK!
How long did you wait from order to ship? It's been a week and no tracking for me yet.
WickdPerfekT Mine was fast but it was in stock. Owner just had s child so he’s catching up now.
I have been looking for a while as well and came across Everyday Blade by Korcraft LLC here on youtube. I haven't received mine yet, but it looks amazing! Slicey you and Best Damn EDC should try and get your hands on one to try it out.
I think the fastbacks defeat the purpose of of a utility edc knife. The point is to have a small discret non intimitading knife used for box cutting and very light duty tasks. If you know you'll be cutting carpet then bring a real utility knife. On the fastback you carry a very small blade in an unnecessary large handle (even worse than the PM2 in b:h ratio).
Gerber for me, only due to its cheap so your more likely to carry it and it's heavy enough to feel that it's still in your pocket, but then it's also cheap enough not to ruin your day if it's falls out.
Didn't know I needed one until now ! Damn you !!
thx for the video! hows the blade compatibility for the slidewinder? I've seen complaints about the variety it can handle
Thanks dude. Very informative.
Yes, do flashlights.
Do wallets (the EDC/slim/odd types)
Do a day/trip/life overview of how your use your EDC.
I mean there are people who carry EDC just as a hobby and there are some who carry for actually using/what they need everyday. I want to see how you use whatever you like to carry everyday not like how you would use it if it happens. Just like you most of the time I am working in front a PC except when I am out for meetings, client visits and my bike rides. My EDC for normal day vs EDC for weekends is a bit different especially if its a outdoor weekend which happens once in 4 - 6 weeks.
Currently carry the Gerber... but I backed the TPT Slide... so waiting for that to show... can't wait. Stoked that you picked it out of all those.
I can’t see myself spending over $30 for an utility knife... that’s me. $10 yes.
i agree, if im gonna spend over 30 bucks just gonna buy myself a nnice pocket knife
@@Phaminator525 i can see where youre coming from, i have expensive knives, bemchmades, Esee's, Spyderco's, Tops, ect and i actually just purchased a gerber prybrid because im in drywall and was ruining my para3 had to clean almost daily, so switched to my izula 2 and was sharpening almost daily, i needed a utility blade but wanted something decent, that said i think its under 30 in the usa but i paid 32 for it
I have this exact OLFA knife, bought it for leathercrafting. Must say that the thicker blade doesn't slice leather all that well. Would recommend something with a thinner blade for better cutting.
Gil-Tek made a version 2 of the RUK which does have a pry bar and a little string cutter slot.
They also made a prototype without a bottle opener and I'm waiting for it to be produced and be available in the market
I EDC as well the Gerber EAB. The liner lock can go a Little flimsy over time but in my case I have used the knife as well as an throwing knife. That gives some slack on the liner lock. Otherwise the Gerber EAB is definatelly the way to go. It's the compactest as well with about the most exposed blade edge of all of those.But the main Thing is the screw contributes to the most sturdy blade Fixation since even when using the blade as a flat head screwdriver (and belive me, there is a Point were you will use that as an flat head screwdriver) the blade will not come loose and is sturdy enough not to break eighter.As well the Gerber EAB is the safest. Nothing will come looser in your pocket and the liner lock makes sure the blade does not snap Close on your Hand while using.
I had the Milwaukee fast back and loved it. Just lost it two weeks ago.
from someone who isn't into blades I have to say Im really digging the workpro utility knife. So cheap and lightweight.
Really like the maker knife. Can’t wait for it to hit the market, never ordered anything on Kickstarter before so don’t feel comfortable will wait for it to hit market hopefully.
I know one shouldn't carry anything else in a pocket with a weapon, but, i like my clipped knife's point facing down. That prevents me from stabbing myself with a weak springed old knife. It also puts the thumb flicker right on my thumb when i pinch the top of knife out. Ready to open.
I use the Stanley for work. And I spend the extra buck and get the heavy duty blades for it. I really don't need them, but I like being able to push the tool a little bit more if I need too.
Cool beans man ..I love all those knives but honestly the one I have is the Gerber I like it .. does the job, would one of the crazy expensive ones be cool... Yes ,yea it would but I can't spend that kind of $$ o well another life I guess lol love your channel man! Thanks
Cool options but I'll stick to my Gerber eab it's the best I've found for me and what I do for work
Great work man!
I stopped using my Gerber when I had a blade slip out and sliced open my finger even though it was tightened down completely and properly with a screwdriver
I'd add the black and white plastic Scheffield folder. I got mine for $7 with a multitool. Granted, that multitool is the absolute worst you can possibly get your hands on but it's worked well for me in a pinch. The utility blade is great.
where do you get the copper replacement blades? Great video, as always
I just picked up a Gerber E.A.B. light and really like it
When was the RUK introduced to the market? I’ve seen SNECX MONO which looks similar in design with a lock bar to hold the blade while you slide it around.
I’m not sure who came up with that design.
Hey Taylor - love your stuff, you know that, but your videos of late seem to have something up with the framerate. I'm wondering whether they are exporting out in a weird bitrate, or fps as it seems rather jittery?
Slight correction. The gerber EAB is tool less. The trick is to use the new blade as the screwdriver. The screw extends above the surface enough to allow the back of the new blade to engage the screw. i have not use a coin/screwdriver in years.
The Outdoor Edge is a cool little unit, it is picky with the type of blades you use, some fit some don't
Keep the damn vids come YOU HUMAN BEING !!!!! you got good vids man. I juat got two new EDC!!!
I have the original TPT slide, got it on kickstarter when they first came out, however because they are so short and thin I don't use it that much, I use the workpro as I got better grip on it, but the blade do sometime pop out when I use it more repressively, which brings me to designing my own one, hence I'm looking these utility knife reviews for an inspiration. Once I develop it and be happy with it, I will send you one for honest thought on it. 😃
Nebo makes a utility knife I've been edc carrying for years it has a button lock and a single button blade release as well as a carabineer style clip/bottle opener I bought at my local hardware store for $9 great deal lasted for me about 7 years now!
I've been carrying the outdoor edge sidewinder for several years. It fits great in a pocket slip. My only problem is that with my huge hulk hands my thumb always finds the retract button when cutting. I do wish the pocket clip was on the other end though. I also carry the gerber prybrid it takes #8 or 10 xacto blades. It is a pretty good little prybar with a blade.
Great review! Where can we buy those colored blades for the TPT slide specifically the purple one?
I would love to see a comparison on two of the newer Outdoor Edge utility knives, the B.O.A and the Utilipro, both appear to be one handed folders. Otherwise love your vids.
The sidewinder is a cool little knife but I have yet to find a replacement blade other than the “outdoor edge” blade that came with it, that allows it to function the way that it is supposed to.
Fyi stone wash and tumble are the same thing. Thet rexford is acid washed and then stone washed or tumbled. Amazing video though. Thank you and keep up the amazing content.
Can anyone tell me what those gold serrated blades are called? And where I can get them?
Between the rut and the tpt or tpt slide which one of the three exposes more blade when fully opened? Also which one has the thickest prybar?
The small Milwaukee can be bought alone at Home Depot for 8.98 in store. I got one myself
I got the YeeYou, I really like it. It replaced a multi tool, and I wanted to add a utility knife. I'm not really bothered that you can't get a gorilla grip on the thing, because I kind of accepted that it's a multi tool, and with most multi tools, you can't really get a good grip/leverage/etc. on any of the attachments, whether it be because your hand is hitting the next tool over, or the tool tucks into another part so it's not super big, things like that. I've just grown really used to having a screwdriver, or a bottle opener, or whatever in a pinch. I wanted it on my keychain, takes up less space than my key fab and the multi tool it replaced. It works fine for box cutting, which is all I really wanted it for. I have a Husky utility knife that's very similar to that smaller Milwaukee that I don't EDC for everything else, and I do EDC a folder in case I'm out and need more beef. Oh, it's surprisingly very solid feeling, especially considering the price. So, add to that I really can't really justify more than say 20 bucks for a utility knife, it was perfect for me. Purely situational though, I totally get why you wouldn't like it.
how long ago did you order it? I was looking and it is currently unavailable.
@@quewerty8401 Two or three weeks ago. That sucks, hope they get it back in stock.
What is the actual blade you have put in the Gerber EAB?? It isn't stock.
Hey Taylor, Gil-Tek are sold out of there Titanium model, Can you find out if there making more ? There contacts not working,
I not sure if anyone suggested but may want to checkout Cristy made knives
American made a little much at $30
But blade can be resharpened but very light
No bells and whistles but perfect EDC knife for what most of us use a knife for.
Enjoying the channel thanks.
best edc blade really is the milwaukee fastback compact
Loew's has a 20$ utility knife pack, and the knife stores 4 extra blades plus a mini version with a keyring. You should check it out. It's my EDC knife.
$140 and blade-rattle? Crazy.
$140 an no blade rattle, crazy!
Long time watcher, first time commenter.
The clip on the Gerber EAB is removable and can be used to change the blade.
The frame lock on that gerber may feel flimsy at first but I can personally guarantee that if you didn’t get a factory defect, it’s strong…been using mine for years
Dude your videos are top-notch.. I don't even want one of these things and I watched the whole god damn video
I hope you get to review the "Maker Knife" looks awesome.