Enkei RPF1 17x8.0 +35 on TheTongMan's Si

แชร์
ฝัง
  • เผยแพร่เมื่อ 17 ก.ย. 2024
  • Here are my Enkei RPF1 rims in 17x8.0 +35 offset on my 2008 Civic Si Coupe. The rims are only 16lbs compared to the stock rims at 23lbs. Great weight savings. People tell me that the RPF1s are overplayed, but I disagree. The RPF1 will never be overplayed. It's design is timeless.

ความคิดเห็น • 108

  • @TheTongMan
    @TheTongMan  11 ปีที่แล้ว

    Yes they are 17's. I said it wrong in the video.

  • @lynoj777
    @lynoj777 11 ปีที่แล้ว +1

    This is a nice video. Thanks for taking time to upload and share information. Very informative.

  • @TheTongMan
    @TheTongMan  11 ปีที่แล้ว

    I have had no rubbing problems. My stock camber is non-adjustable. When I had my wheels aligned, my rear camber was -1.8 & -1.5 degrees in the rears and -0.5 and -0.1 in the fronts.

  • @VinceFung
    @VinceFung 11 ปีที่แล้ว +1

    You should black out the front lower grill where the radiator/Front mount intercooler is located it looked awesome on your 370z.

  • @TheTongMan
    @TheTongMan  11 ปีที่แล้ว

    I agree. I was hoping the rear drops more, but I think that's as far as it goes.

  • @310chris18
    @310chris18 ปีที่แล้ว

    17x9 look better in my opinion because the 17x8 make you look like you have a +40 offset

  • @DylanGonzalez-yu7wo
    @DylanGonzalez-yu7wo หลายเดือนก่อน

    What center cap did u use bro?

  • @TheTongMan
    @TheTongMan  11 ปีที่แล้ว

    depends if you wanna be hellaflush (17x9) or hellafunctional (17x8). Plus with 17x9, you may have to roll your fenders.

  • @KiserSosei2U
    @KiserSosei2U 11 ปีที่แล้ว

    Thanks TM I now have the front and rear springs installed. 225/40R18 with 18x8 +30 going on this weekend

  • @evandooley6370
    @evandooley6370 11 ปีที่แล้ว

    thanks man. i ended up ordering the same as you. looking for function haha nothing crazy. can't wait to get them

  • @TheTongMan
    @TheTongMan  11 ปีที่แล้ว

    I'll give it a try. Thanks.

  • @TheTongMan
    @TheTongMan  11 ปีที่แล้ว +1

    which springs are you lowered on? I'm on Eibach ProKits so it doesn't lower too much which was why I can run 235/40 tires without any issues

    • @9321ilor
      @9321ilor 7 ปีที่แล้ว

      TheTongMan do u think it be possible to run 17/8.0x 35 offset rims on 235/40/17 tires on the eiback sportline springs on the koni yellow strut and shocks without any rubs and issues???

  • @TheTongMan
    @TheTongMan  11 ปีที่แล้ว

    With sportlines, you may need to do some fender work if you run 235/40 plus you may need a camber kit for the fronts.

  • @lincolnblack7923
    @lincolnblack7923 4 ปีที่แล้ว

    Very clean!👌

  • @1989alie30
    @1989alie30 11 ปีที่แล้ว

    Love it man have the same rims for my Si but mine is lower on eibachs sportlines wondering what tire to

    • @georgeparker555
      @georgeparker555 5 ปีที่แล้ว

      You have 17x8 with a 35 offset and it doesnt rub?

  • @TheSelfless1
    @TheSelfless1 5 ปีที่แล้ว

    I was looking into 215/50r17 tires but now I this convinced me otherwise, thanks Big T 🤙🤞

  • @TheTongMan
    @TheTongMan  11 ปีที่แล้ว +3

    it's 17x8.0 +35 offset

  • @Shelz650
    @Shelz650 10 ปีที่แล้ว

    This looks sick man! Gonna get the same setup on my 09' fg2 but with the HFP suspension. Hopefully it'll come out looking similar.

    • @TheTongMan
      @TheTongMan  10 ปีที่แล้ว

      With the hfp suspension, there will be more wheel gap

    • @Shelz650
      @Shelz650 10 ปีที่แล้ว

      TheTongMan Just saw a picture on 8thcivic of fg2 w/ these rims on HFP suspenion. Gap didn't look too bad, perfect for DD... I'll probably get HFP and if i wanna go lower down the road I'll put the pro kit springs on it.

    • @TheTongMan
      @TheTongMan  10 ปีที่แล้ว +1

      yep that's exactly what I did too..

  • @eyanvenom
    @eyanvenom 11 ปีที่แล้ว

    Very nice wheels!

  • @TheTongMan
    @TheTongMan  11 ปีที่แล้ว

    Enjoy them! Bet you can't wait for them to get delivered. I was constantly checking the tracking progress. LOL

  • @uome673
    @uome673 11 ปีที่แล้ว

    Nice car bro sick rims

  • @scuds03
    @scuds03 11 ปีที่แล้ว

    The front looks perfect, just need to drop the rear just a little bit to match. nice car man!

  • @evandooley6370
    @evandooley6370 11 ปีที่แล้ว

    looks sick bro. my si is lowered on pro kit as well. going to get these. do you think i should get the 17x8 also or the 17x9s?

  • @alexcrx60
    @alexcrx60 2 ปีที่แล้ว

    Suspension bro?

  • @oscarjsm24
    @oscarjsm24 ปีที่แล้ว

    Can I use that same tire spec on my fa5? I’m on coilovers. Worried about rubbing.

    • @oscarjsm24
      @oscarjsm24 ปีที่แล้ว

      I’m on 17x9 +30 mst wheels
      Or which tire size would you recommend?

    • @TheTongMan
      @TheTongMan  ปีที่แล้ว +1

      @@oscarjsm24 i would go with a 245/40 tire size, but with your lower offset, you may rub your fender

    • @oscarjsm24
      @oscarjsm24 ปีที่แล้ว

      @@TheTongMan Time to roll them fenders I guess lol. Thank you. I’m on 215 right now :/

  • @TheTongMan
    @TheTongMan  11 ปีที่แล้ว

    Hey man, glad you found my channel. Are you Eugene's bro?

  • @lynoj777
    @lynoj777 11 ปีที่แล้ว

    This is a nice video. How did you install the stock Honda center caps on the front wheels? There's a thing a the center that's hitting the cap. Back wheels fits really good though. Thanks.

  • @McDzy
    @McDzy หลายเดือนก่อน

    what suspension did you have on this one boss?

    • @TheTongMan
      @TheTongMan  หลายเดือนก่อน +1

      @@McDzy eibach pro kit springs

    • @McDzy
      @McDzy 17 วันที่ผ่านมา

      @@TheTongMan just the springs at the time? just stock suspension plus the eibach springs? any rubbing at the time?

    • @TheTongMan
      @TheTongMan  17 วันที่ผ่านมา

      @@McDzy no rubbing at all. Its only a slight drop.

    • @McDzy
      @McDzy 17 วันที่ผ่านมา +1

      @@TheTongMan would 2 inch drop from springs rub? haha
      mann,, you the best btw! just wanted to say that. truly an inspiration to us/me 8th gen owners, especially 8th gen civics. debating whether to get 17x8 +35 or +45.. got an 06 civic si Rallye red coupe.. used to have fa5 07 Rallye red before it got wrecked =(

    • @TheTongMan
      @TheTongMan  17 วันที่ผ่านมา

      @@McDzy depends on what wheels and tires you go with on a 2” drop. 17x8, you’ll be fine.

  • @VelvetThunder27
    @VelvetThunder27 11 ปีที่แล้ว +1

    what lug nuts do you have on here? looks great man

  • @dejaunbrown1142
    @dejaunbrown1142 7 ปีที่แล้ว +1

    what do you think about 18x8 with a 35mm off set? would the rims be flush with the fender? I have stock suspension right now on my 07 si

  • @KiserSosei2U
    @KiserSosei2U 11 ปีที่แล้ว

    TM, very nice! Are your tires rubbing at all and did you adjust camber? I have a very similar setup that I'll be going with in the next week or so.
    KrazyKanuker

  • @TheTongMan
    @TheTongMan  11 ปีที่แล้ว

    $940 shipped from LSD Motorsports

  • @splitskyex
    @splitskyex 11 ปีที่แล้ว

    Dang i'm loving those! i thought you had hfp side skirts as well?

  • @TheTongMan
    @TheTongMan  11 ปีที่แล้ว

    I had to buy the HFP lip kit and install it myself, it doesn't come like that.

  • @bumble144
    @bumble144 11 ปีที่แล้ว

    it be pimpin brah !!

  • @1982Rubencito
    @1982Rubencito 11 ปีที่แล้ว +1

    people the lower the offste # the more the rim sticks out not the other way around!

  • @1989alie30
    @1989alie30 11 ปีที่แล้ว

    Go for? Do you rub?? Was thinking 235-40 or 215-45 I just installed the full rave cat back on mine btw sounds awesome I will make videos after winter

  • @lorenzoornelas
    @lorenzoornelas 9 ปีที่แล้ว

    Hey how did you lower your rears? In the walkaround video of your SI it seems to be way less of a fender gap then in this video? I believe ur running the same setup too the pro kit springs!

  • @TheTongMan
    @TheTongMan  11 ปีที่แล้ว

    No, I'm not low enough to do any fender work.

  • @iivv_nn
    @iivv_nn 6 ปีที่แล้ว

    dope

  • @gilbertmaldonado950
    @gilbertmaldonado950 7 ปีที่แล้ว +2

    Where did you buy your rpf1 ?

  • @davidyang7290
    @davidyang7290 11 ปีที่แล้ว

    damn nice ride you got there... what kind of lug nuts of those? those are extended right? lol... what size are they? i got some blox one... width is 25 mm and thread is 12 x 1.5 but they don't fit fine... any ideas?

  • @kseriescosta
    @kseriescosta 11 ปีที่แล้ว

    Clean bro! What size tires you running? I think Ibsen your car before on the 8thgencivic FB page. LOL

  • @michaelpugsley1618
    @michaelpugsley1618 6 ปีที่แล้ว

    +TheTongMan what kind off of lug nuts are you using

  • @appleman812
    @appleman812 6 ปีที่แล้ว

    I have an 07 civic coupe. If I buy a 17x8 with the same offset as urs i can run them with no spacers ? And a 235/45/17 will work no rub?

  • @victorpla29
    @victorpla29 9 ปีที่แล้ว

    Hi there ! The 7 pound diference between stock rim and enkei made a difference? Do you feel it in acceleration or cornering ? Thanks a lot

  • @jovannygalvez8191
    @jovannygalvez8191 10 ปีที่แล้ว

    So 17x8.0 +35 will make it look flush or do you need spacers ?

    • @TheTongMan
      @TheTongMan  10 ปีที่แล้ว

      its already flush without spacers

  • @AbslutZr
    @AbslutZr 6 ปีที่แล้ว

    What size tires do you have? Nice honda bra

  • @ThePrestigeBeast
    @ThePrestigeBeast 9 ปีที่แล้ว

    Just to avoid the having the same wheels as thousands of other people i think im gonna get enkei raijins instead of the rpf1's

  • @Claytonphat1
    @Claytonphat1 8 ปีที่แล้ว +7

    18x8..not 17x8?????..

  • @spoonfixer
    @spoonfixer 9 ปีที่แล้ว

    Did you notice any difference in how the car felt after the rim swap? Nice choice btw!

  • @kxiong93
    @kxiong93 11 ปีที่แล้ว

    No I'm not. I'm just one of their co workers.

  • @Kpkenny96
    @Kpkenny96 11 ปีที่แล้ว

    if i get 18x 8.5 35mm would it be flush with my 09 si?

  • @heczrivz2390
    @heczrivz2390 6 ปีที่แล้ว

    How you fit the oem center caps in the front?

  • @Soua24
    @Soua24 7 ปีที่แล้ว

    what is the measurement of your car from the ground to the fender?

  • @EasternWeekender
    @EasternWeekender 7 ปีที่แล้ว

    Did you have to fender roll these? if not, did you rub at all? Would you recommend the 17x8 +45s?

    • @TheTongMan
      @TheTongMan  7 ปีที่แล้ว

      +Dean Baynon no fender roll was needed on my car. if you go with the +45 offset, you'll need spacers for the rear

    • @EasternWeekender
      @EasternWeekender 7 ปีที่แล้ว

      I have a 2008 si sedan. Did you rub or bottom out at all with +35?

    • @EasternWeekender
      @EasternWeekender 7 ปีที่แล้ว

      Also, I have the eibach pro kit.

  • @joseabarca9091
    @joseabarca9091 6 ปีที่แล้ว

    i have one honda civic si sedan wat size of wheels recomended 17x9 or 17x8?

  • @KiserSosei2U
    @KiserSosei2U 11 ปีที่แล้ว

    Same here

  • @hmoobkee
    @hmoobkee 11 ปีที่แล้ว

    I know some si comes with those kits, but wat is da name?

  • @SledTrax1
    @SledTrax1 11 ปีที่แล้ว

    did you put your HFP lips on or did it come that way ??

  • @red88alert
    @red88alert 8 ปีที่แล้ว

    Any idea how these might fit on a 7th gen Celica?

  • @shoyeuyang9198
    @shoyeuyang9198 6 ปีที่แล้ว

    Will this fitment work on the 2012 Honda Civic si coupe ( 9th Gen )?

  • @xmakeitrain24x
    @xmakeitrain24x 6 ปีที่แล้ว

    Did you have a camber kit?

    • @TheTongMan
      @TheTongMan  6 ปีที่แล้ว

      no. stock camber

  • @Bboyz916
    @Bboyz916 9 ปีที่แล้ว

    I have a 2008 civic n i want those rims but idk wat the 35+ offset means

    • @el-hp1lj
      @el-hp1lj 7 ปีที่แล้ว

      bboyz559 the higher the number the more pushed towards the suspension the wheel will be. the lower the number means the wheel will stick out further. the wider the wheel gets it typically comes with a lower offset so it will clear suspension parts but will stick further out the fender

  • @highspeedenthusiast6628
    @highspeedenthusiast6628 7 ปีที่แล้ว

    anybody know the lug torque specs for these specific Wheels by chance?

  • @mosesr4278
    @mosesr4278 11 ปีที่แล้ว

    That wheel look like it has a 43mm offset, , the 35mm is a deeper look

  • @kxiong93
    @kxiong93 11 ปีที่แล้ว

    I wanted those too for my type s. but I wanted the concave ones. Lol clean tho. Good job. I like your set up too. I'm Fongs co worker. Haha do I know a little about your car.

  • @Fingamyaz
    @Fingamyaz 10 ปีที่แล้ว

    Sexy. Rare to see the kit

  • @Claytonphat1
    @Claytonphat1 8 ปีที่แล้ว

    what sz tires..????

  • @KevDoesStuff
    @KevDoesStuff 11 ปีที่แล้ว

    I can only find these in +45 offset?

  • @mosesr4278
    @mosesr4278 11 ปีที่แล้ว

    Due look at box and read,, Im sure that your rims are 17×7 with a 45mm offset, and you just told us your tire size, a 17in size tire.

  • @Mr.AhDuuuuuu
    @Mr.AhDuuuuuu 11 ปีที่แล้ว

    Was your fenders rolled

  • @TheTongMan
    @TheTongMan  11 ปีที่แล้ว

    no i didn't..too poor now to get them

  • @jeffreycattelino3996
    @jeffreycattelino3996 8 ปีที่แล้ว

    there is no such thing as "street slicks" the tires have tread on them therefore not slick.

  • @Orangeman47
    @Orangeman47 11 ปีที่แล้ว

    Those are 17" not 18"

  • @mosesr4278
    @mosesr4278 10 ปีที่แล้ว

    Due those are 17s , not 18s

  • @kseriescosta
    @kseriescosta 11 ปีที่แล้ว

    I seen**

  • @heczrivz2390
    @heczrivz2390 6 ปีที่แล้ว

    Your tires are more expensive then the wheels lol im trying to go this route but im not balling like you man.

  • @MeatyFlush1
    @MeatyFlush1 11 ปีที่แล้ว

    Go home Chevy, your drunk. Lexus is still a better commercial.

  • @eduardocurvelo8607
    @eduardocurvelo8607 7 ปีที่แล้ว

    You said 18" rims and 17" tires lol

  • @MrRodillo123
    @MrRodillo123 11 ปีที่แล้ว

    Veryflush but not hellaflush,

  • @alexvieira7945
    @alexvieira7945 2 ปีที่แล้ว

    Did u roll ur fenders?

  • @sedanxrs
    @sedanxrs 11 ปีที่แล้ว

    Where did you get your rims from and how much?