Did you come across a card that had all of it chips marked as bad? The same script is returning multiple results, all chips are detected as bad. BTW please put link to the script you used, there are multiple versions floating around.
I am getting very small memory errors on chip B0 on my GPU. I am still using the GPU however as the memory fault is tiny and I don't notice it. Do you think just reheating this chip would fix this error or do you think I would need to replace it? I've seen videos where people are using a heat gun to solve issues with their GPUs. Willing to try if this might help.
Any problem with GPUs that heating would solve, cooling would also solve not to mention it's safer. If your GPU isn't crashing anywhere then I'd say just keep it as is or replace it if you really want to
@@A.S.Repairs hello, I have the same problem with a nitro rx 580 4gb, most games run fine, but in some games the lens flare is exagerrated and it results in circle-shaped artifacts (not vertical lines). I tried running occt vram test and I got over 7k errors, I think one of the memory banks has gone bad.
you are amazing brother keep up the good work, btw i had a question can we get a display in proper mining edition card rx 580? or are they only meant for mining >|?
Some of those cards have the place on the pcb for HDMI and display port which you can solder on yourself and change/remove the i/o shield. So yes, it is possible.
@@glorioussounds6865 In that case I don't think it is a mining card, I might suggest flashing the BIOS to the original file, you can find it in TechPowerUp
@@glorioussounds6865 you need to solder capacitors and resistors before the hdmi port because its not conected to the cpu and than it will work On the back side you will see the hdmi port contacts and right next to it the soldering pads for capacitors and ressistors
Thanks for the guide video. I tried it with 6800xt. 10mb works fine with no errors. From 13mb onwards, there is noise on the screen and an error appears. Is any problem?
I have msi rx570, screen goes black sometimes green when drivers are loaded, also artifacts. But in safe mode or without display driver it doesn't artifacts
Hi i have followed your method on my Gigabyte RX 580 4 GB Model. And the results i get are Number of Faulty Chips: 4 chip 3 and/or 4 is faulty at address : 0 chip 1 and/or 2 is faulty at address : 512 chip 5 and/or 6 is faulty at address: 1024 chip 7 and/or 8 is faulty at address : 1536 Does this mean all the chips are bad ? The card gives black screen and 100% fan spin as soon as i try too Start Furmark or any type of load.It crashes out.
Wow amazing! Never knew about the Linux trick to find the exact memory issue. I have a GTX 1660 with what I believe to have a memory issue as it has artefacts. I got this GPU in a system from Amazon and it come DOA i checked the bios and it had a different flashed bios than what model it is strangely. It still artefact on the screen unfortunately so I don’t know what else try next? Any help is appreciated
For Nvidia cards, you need to use another memory test tool called mats. I will make a video about it in the future but there is a guide on repair.wiki for it already.
HELLO BROTHER CAN U HELP.???? I have powercolor rx 580 4gb gpu the problem is the display had went dark while playing game and is not waking up from that state, the pc turns on but no fans spin no display just the fans get a little jerk while pressing the pc power button for turning the pc on. should i be doing this heat up method of vram . could this solve the problem ? i guess the problem is with vram i had it repaired from a local repair shop but the issue is still there after 20 to 30 mins the gpu again goes dark no fans spin no display but the pc stays on. also what could be permanent solution to this problem.
thank you very much for shared this information, is very useful. I have a gtx 1060 strix oc wiht all voltages presents but no show image. I already checked all pci-e lines and are good, i cecked pex rst and is fine too, so, Why is it not showing video? I should mention that I bought this card with a short on vmem, I found it on a capacitor and removed it. the resistance in vmem is 65 ohms... pd: sorry for my bad english
I have rx 570 and stuttering in few games like a lot of stuttering just unplayable games like ac origins but odyssey running okay warzone 2 but warzone 1 running okay counter strike go 80 fps with stutter and this happening with every settings
I have rx 570 that sometimes throws black screen on driver install and when booting windows. But most of time it boots ok, games run but after a 10 min the colors start to get messed up and a little bit later the gpu throws black screen. Also the core frequency is lower than it should be. Bios is original, tried to reflash in case of corruption but its still same. Maybe its memory or its power controller or something? Is it even worth tryint to fix?
What is the maximum GPU temperature if you try to run Furmark for one minute or so (go for the 720p benchmark button). You may have bad thermal paste (dried up) or if the thermal paste is fine then you may have thermal pads a little bit too thick. This would be my first guess. Maybe the last time someone changed the thermal paste and/or thermal pads, it is possible to have one or more thermal pads missing (or it is very much possible to have them dried up). I'd say the VRMs can heat up a little bit too much if the pads are dried up and either blow up or the card is slowing down a bit. My other guess is that your card may have one or more solder balls ruptured and every time the card heats, it is happening to show weird colors, black screen or blue screen. It also can be a solder pad broken under one of the memory chips or even under the GPU itself and if this is the situation, a repair is not easy at all (this mean it can be expensive and it has to be a real professional who is doing the repair). Video cards usually have a tiny chip managing the video card's internal power supply. Components around that chip can be broken or even the chip itself can get broken or partially broken. There's not an easy answer to your question. The temperature of the GPU in the one minute 720p Furmark's benchmark should not exceed 80 Celsius. 75 Celsius should be the maximum. Sometimes the cooling fluids are gone from the heat pipes of the cooling system. I've seen this more often for the MSI RX cards. Like I said, there is no easy answer.
Hello please help me. I have run this script on my card i thought it shows correct but when i replaced the memories it still give same errors so i suspected that it is not working correctly when i put another card with no memories it was still giving same errors like with memories. So i am getting same errors all the time.
Hello brother, I am repairing the graphics card. Is it possible to convert an 8gb card to 6gb in the rx series? For example, the chip is faulty, even if the d0 and 01 vrams are changed, it still shows faulty. In this case, is it possible to disable d0 and d1 and run the card as 6GB?
I suffer from not running games and a problem with the graphics card, and I run it on another device and get an error message Error 0x887A0006 Unreal engine is exiting due to d3d device being hung and a problem with the graphics card itself. Is there a solution for Evga 1060 6g Ssc 6267 And I removed ddu the entire system and downloaded the latest version of NVIDIA and installed the latest version of DX12, and the problem still exists This error is in all new generation games and old generation games
Hi, what if all memory banks reads all error or failing, i dont think its the vram chips itself, the error reads same digits numbers, where could it be? The controller or the bios??
@@A.S.Repairs earlier i tried to replace the bios chip with different one, and the vmem is stabled in 1.5v now, and keyboard is now active, unlike previous it doesnt active the keyboard, took 30 secs to light the keyboard, now the problem is i cant flash it cuz i used a different model of bios chip came from rx 550,😅 do you think its the bios chip problem?
hello i have the sapphire rx 580 4gb which has vcore a dnd memory but no 1.8v no memory controller or pex any ideas or help would be appreciated excellent videos by the way very helpfull.
Nice Video Great Job I dont have PLL VCore Vrm voltages and not 1.8 voltage. I think my problem its APW 8722 its a protector comparator state for Pwm work and if gpu get any mal function this APW 8722 gone a helll.
wow very useful I have rx 560 4GB which have code43 crash on load when sometimes driver gets loaded and also vertical lines sometimes in bios when booting is it the core or the memory
@@A.S.Repairs it not good to do it that way. I do it before i buy board holder from bga station and preheater. With it u can desolder all mosfets or rams without interupting. Way easier work. All from ali 50e holder, 100e preheater
I have a rx 560 4gb which gives vertical lines artifacts only once in 10 boots and and when it does not I works 100% fine for indefinitely can you help me what might be the problem I have already tried your script and it was unable to tell what bank was faulty
Soy nuevo en este canal. Aunque solo hablo español, usted explica con detalles. Seguiré aprendiendo, gracias
Did you come across a card that had all of it chips marked as bad? The same script is returning multiple results, all chips are detected as bad. BTW please put link to the script you used, there are multiple versions floating around.
I am getting very small memory errors on chip B0 on my GPU. I am still using the GPU however as the memory fault is tiny and I don't notice it. Do you think just reheating this chip would fix this error or do you think I would need to replace it? I've seen videos where people are using a heat gun to solve issues with their GPUs. Willing to try if this might help.
Any problem with GPUs that heating would solve, cooling would also solve not to mention it's safer. If your GPU isn't crashing anywhere then I'd say just keep it as is or replace it if you really want to
@@A.S.Repairs hello, I have the same problem with a nitro rx 580 4gb, most games run fine, but in some games the lens flare is exagerrated and it results in circle-shaped artifacts (not vertical lines). I tried running occt vram test and I got over 7k errors, I think one of the memory banks has gone bad.
@@A.S.Repairsmy rx 580 in some case show green screen solid for a few sec and then back to normal, could this be potentially memory faulty?
Is this script working on other AMD cards that have VRAM chips (R7 xxx R9 xxx RX5600XT, RX5700XT, RX6800 etc)?
It's confirmed working on Polaris, I'm not sure about the others.
@@A.S.Repairs I'll give it a try on some of the others and let you know. Thanks.
Which linux distro are you using?
@@LearnElectronicsRepair Manjaro
Which program is this? İs ti different from tserver or dmmg??
you are amazing brother keep up the good work, btw i had a question can we get a display in proper mining edition card rx 580? or are they only meant for mining >|?
Some of those cards have the place on the pcb for HDMI and display port which you can solder on yourself and change/remove the i/o shield. So yes, it is possible.
@@A.S.Repairs their is a hdmi port already but it doesnt give any display but it gets detected and mines all fine any crypto..
@@glorioussounds6865 In that case I don't think it is a mining card, I might suggest flashing the BIOS to the original file, you can find it in TechPowerUp
@@Fagutv already tried that did not help
@@glorioussounds6865 you need to solder capacitors and resistors before the hdmi port because its not conected to the cpu and than it will work
On the back side you will see the hdmi port contacts and right next to it the soldering pads for capacitors and ressistors
Thanks for the guide video. I tried it with 6800xt. 10mb works fine with no errors. From 13mb onwards, there is noise on the screen and an error appears. Is any problem?
same for me but from 29 mb up the screen does look glitchy when i test look u described do u get error in chip 7 or 8?
mine is rx 6800
I have msi rx570, screen goes black sometimes green when drivers are loaded, also artifacts. But in safe mode or without display driver it doesn't artifacts
What GPU fail alot. Nvidia or AMD. What is more, the most failin parts on those units. Thank you
Awesome repair. Did the new memory chip needs to be formatted first to be working?
No it just needs to be the same model
@@graphicscardtech3167 ah i see. thank you.
Hi i have followed your method on my Gigabyte RX 580 4 GB Model. And the results i get are
Number of Faulty Chips: 4
chip 3 and/or 4 is faulty at address : 0
chip 1 and/or 2 is faulty at address : 512
chip 5 and/or 6 is faulty at address: 1024
chip 7 and/or 8 is faulty at address : 1536
Does this mean all the chips are bad ?
The card gives black screen and 100% fan spin as soon as i try too Start Furmark or any type of load.It crashes out.
Most likely vmem isn't even there when it starts testing. Check why vmem or vddci turns off under load first.
Hah bro its gives same with mine. 😁Even i tested with gpu with no memories on gpu and still same errors
Wow amazing! Never knew about the Linux trick to find the exact memory issue. I have a GTX 1660 with what I believe to have a memory issue as it has artefacts. I got this GPU in a system from Amazon and it come DOA i checked the bios and it had a different flashed bios than what model it is strangely. It still artefact on the screen unfortunately so I don’t know what else try next?
Any help is appreciated
For Nvidia cards, you need to use another memory test tool called mats. I will make a video about it in the future but there is a guide on repair.wiki for it already.
HELLO BROTHER CAN U HELP.???? I have powercolor rx 580 4gb gpu the problem is the display had went dark while playing game and is not waking up from that state, the pc turns on but no fans spin no display just the fans get a little jerk while pressing the pc power button for turning the pc on. should i be doing this heat up method of vram . could this solve the problem ? i guess the problem is with vram i had it repaired from a local repair shop but the issue is still there after 20 to 30 mins the gpu again goes dark no fans spin no display but the pc stays on. also what could be permanent solution to this problem.
How do you connect and read the external board and use the internal? Could you show the connections? Thanks
In the bios make the integrated GPU the main GPU and just plug in the card as normal but the HDMI cable in plugged in the motherboard
pls share memory test for rx5000 up
Are you using a microscope camera or not?
Right now I'm using a note 9
thank you very much for shared this information, is very useful. I have a gtx 1060 strix oc wiht all voltages presents but no show image. I already checked all pci-e lines and are good, i cecked pex rst and is fine too, so, Why is it not showing video?
I should mention that I bought this card with a short on vmem, I found it on a capacitor and removed it. the resistance in vmem is 65 ohms...
pd: sorry for my bad english
Post your problem on /r/GPURepair with more details and i'll help you there :)
I have rx 570 and stuttering in few games like a lot of stuttering just unplayable games like ac origins but odyssey running okay warzone 2 but warzone 1 running okay counter strike go 80 fps with stutter and this happening with every settings
I have rx 570 that sometimes throws black screen on driver install and when booting windows. But most of time it boots ok, games run but after a 10 min the colors start to get messed up and a little bit later the gpu throws black screen. Also the core frequency is lower than it should be. Bios is original, tried to reflash in case of corruption but its still same. Maybe its memory or its power controller or something? Is it even worth tryint to fix?
What is the maximum GPU temperature if you try to run Furmark for one minute or so (go for the 720p benchmark button). You may have bad thermal paste (dried up) or if the thermal paste is fine then you may have thermal pads a little bit too thick. This would be my first guess.
Maybe the last time someone changed the thermal paste and/or thermal pads, it is possible to have one or more thermal pads missing (or it is very much possible to have them dried up). I'd say the VRMs can heat up a little bit too much if the pads are dried up and either blow up or the card is slowing down a bit.
My other guess is that your card may have one or more solder balls ruptured and every time the card heats, it is happening to show weird colors, black screen or blue screen.
It also can be a solder pad broken under one of the memory chips or even under the GPU itself and if this is the situation, a repair is not easy at all (this mean it can be expensive and it has to be a real professional who is doing the repair).
Video cards usually have a tiny chip managing the video card's internal power supply. Components around that chip can be broken or even the chip itself can get broken or partially broken.
There's not an easy answer to your question. The temperature of the GPU in the one minute 720p Furmark's benchmark should not exceed 80 Celsius. 75 Celsius should be the maximum.
Sometimes the cooling fluids are gone from the heat pipes of the cooling system. I've seen this more often for the MSI RX cards.
Like I said, there is no easy answer.
Hello please help me. I have run this script on my card i thought it shows correct but when i replaced the memories it still give same errors so i suspected that it is not working correctly when i put another card with no memories it was still giving same errors like with memories. So i am getting same errors all the time.
El programa funciona para gpus que no dan video ?
Si, pero necesitas iniciar con vídeo integrado
What's the T server command?
in this case i tell this Chip is present on XFX 470 480 570 and 580 series
Great thanks 👍
very nice
Hello brother, I am repairing the graphics card. Is it possible to convert an 8gb card to 6gb in the rx series? For example, the chip is faulty, even if the d0 and 01 vrams are changed, it still shows faulty. In this case, is it possible to disable d0 and d1 and run the card as 6GB?
That is possible to do only on Fermi and Kepler Nvidia gpus
(400-500-600-700 and Kepler titan) using a modifier vbios called old Nvidia artifacts
I suffer from not running games and a problem with the graphics card, and I run it on another device and get an error message Error 0x887A0006 Unreal engine is exiting due to d3d device being hung and a problem with the graphics card itself. Is there a solution for Evga 1060 6g Ssc 6267 And I removed ddu the entire system and downloaded the latest version of NVIDIA and installed the latest version of DX12, and the problem still exists
This error is in all new generation games and old generation games
Did you remove the reply?
Hi, what if all memory banks reads all error or failing, i dont think its the vram chips itself, the error reads same digits numbers, where could it be? The controller or the bios??
Do you have vmem and vddci?
@@A.S.Repairs yup sir, all voltages are present, and it can be detected on device manager if on secindary
@@A.S.Repairs i noticed that of i probe the tester on vmem coil, once i press the power on, it reads 1.5v on vmem coil then after seconds it goes 1.3v
Yeah that's fine. Getting errors on all memories usually indicates either a power issue or the memory controller in the core is faulty.
@@A.S.Repairs earlier i tried to replace the bios chip with different one, and the vmem is stabled in 1.5v now, and keyboard is now active, unlike previous it doesnt active the keyboard, took 30 secs to light the keyboard, now the problem is i cant flash it cuz i used a different model of bios chip came from rx 550,😅 do you think its the bios chip problem?
Can this be repaired on laptop too?
does memory corruption has anything to do with hang on post in severe case?
edit : how to diagnose without a software my PC cant even POSTs
Yes sometimes it is related to memory
from whare can i get new memory
hello i have the sapphire rx 580 4gb which has vcore a dnd memory but no 1.8v no memory controller or pex any ideas or help would be appreciated excellent videos by the way very helpfull.
You can't have Vcore if you don't have 1.8V or Vmem or display rail.
Make a post on /r/GPURepair with as much details as possible.
@@A.S.Repairs ok thankyou very much will do.
Does this work on r9 GPUs?
Do any such memory test programs exist on windows?
Ones that tell you exactly which memory chip is faulty? Not really.
how to detect faulty memory on rtx 20 series??
Nice Video Great Job I dont have PLL VCore Vrm voltages and not 1.8 voltage.
I think my problem its APW 8722 its a protector comparator state for Pwm work
and if gpu get any mal function this APW 8722 gone a helll.
where can i get that python script
I have a vega 56 with same problem is it the same process?
Would appreciate any help
Unfortunately, Vega uses HBM memory that is on the same package as the core so replacing it is impossible without replacing the core as well.
@@A.S.Repairs do you mean the memory cant be replaced or reballed ?
@@amorzalek4306 it is possible but you are not replacing only the memory, you're replacing the whole core
@@A.S.Repairs oh thats bad ! So its better to get rid of it
link?
no links...
thanks
wow very useful
I have rx 560 4GB which have code43 crash on load when sometimes driver gets loaded and also vertical lines sometimes in bios when booting
is it the core or the memory
Most likely memory
what can i do when i have no picture
You can still run the script if the card is detected
if y can, post more videos about faulty cards
I will
We need more explain from you sir...😍😍😍😍
buy yourself preheater. without it u can heat it 10minutes. u damage board. it is WAY easy to solder on this thick boards with preheater
My hot air station is very good and i do have a preheater.
@@A.S.Repairs so why r u not using it. soldering rams or mosfet is job that reqieres preheater for good work and to lower temp damage to board
@@danielsatko- i don't show it on video but i heated the board to about 130c before removing the memory with the hot air.
@@A.S.Repairs it not good to do it that way. I do it before i buy board holder from bga station and preheater. With it u can desolder all mosfets or rams without interupting. Way easier work. All from ali 50e holder, 100e preheater
You don't really need preheater to solder / remove ram chips.
You mainly use a preheater for GPU chips.
your video is cut
I have a rx 560 4gb which gives vertical lines artifacts only once in 10 boots and and when it does not I works 100% fine for indefinitely
can you help me what might be the problem
I have already tried your script and it was unable to tell what bank was faulty
Visit repair.wiki there is a guide for memory damage on Polaris and how to detect faulty memory when you have vertical lines