วีดีโอ

pls share memory test for rx5000 up

Make sure to cut the PCIe data lines too.... Yes sir, thats really helpful. We all know exactly which lines and where to cut.

I have an AISURIX 580 8GB 2048SP, when i turn on my PC it will have no display, keyboard won't lit(RGB keybaord) looks like stuck or freeze by the time when i turned it on, but when I disconnect my GPU, it boots up smooth like a butter, RGB lights lit up(RGB keyboard) can someone help me.

no links...

Better than many paid courses, thank you very much.

Wat if all memory chips give 32K on error on writing? And onr 64K error on writing?

can you help me on xfx rx 470 i have short in the 4 and 5 pin

I have a similar card but it is from Asus. When I power on the PC, the fans spin for 1 s and the PC shuts down. In the beginning of the video, you measured resistence from pin 1 on the PCIEx connector to the ground? I am getting 0.0 ohm.

Hi Pal , Watched some of your videos. I am looking for a repair on a RTX 3080. How is best to reach you ,

where do we get the chip u took out and replaced from?

I tried adding you on discord. I think it went through?

thank you 😊

Brilliant, thank you.

mine has a short on R33

Will the card works if I just removed the memory and don't replace it?

Wish you were back on line and doing more vids..

such a good video

Hello how much to repair my gtx1070 xlr8 6:09

link?

Please do you have schematics for GPUS

Also my RTX 3070 is displaying green horizontal lines across with error 43, what do you recommend doing?

How did you find the parts to replace all the resistors and capacitors.

How do you know that's the A1 chip on the board?

How do you know that's the A1 chip on the board?

Is it this issues gpu is dying? What cause this issues

can you help me where to get rx 570 boardview

Can I get board view diagram for my sapphire nitro rx 470 ?

Hello brother, I am repairing the graphics card. Is it possible to convert an 8gb card to 6gb in the rx series? For example, the chip is faulty, even if the d0 and 01 vrams are changed, it still shows faulty. In this case, is it possible to disable d0 and d1 and run the card as 6GB?

Hello Sir Good day.. Can you make power sequence on video card it help a lot on beginners like me.. Thank you Sir.! God bless more power..

is this resistor 10k or 1k please friend advice thank you

What if the lines appear horizontally?

What is the name of your pcie x16 power feeding board? And desperately need this :D

Yes show how you changed the bios. What you need to do is show us how to use this card in ai. To prepare it to do ai, then to produce logical thought and save up a lot of dialogue with the huge source of memory, used for useful purposes, not useless substitute so called mining, when it is nothing of the sort but a useless waste of expensive resources to build fake money. Ridiculous except to scam the internet out of pennies.

What GPU fail alot. Nvidia or AMD. What is more, the most failin parts on those units. Thank you

Ok man apreciate it il try too on my card and see why it has artifacts after i open it and get to or small amount of time past lock screen .. i use atikmdag for drivers if you know why too ... i got it from someone and didnt say why i need that app !

Good job, what was the resistance on 12v pcie after replacement? above K or below

Sir, zotac gtx 1050ti mini here. Fan is spinning no display . 12 volt bus lane is showing resistance above 1000 ohms, but 3.3 volt lane is only showing the resistance value [>1000 ohms] for 1 second then goes to zero. What might be the problem. Havent runned mats till now.

No more video?

More videos please

Bro, Could you help me with that schematic or with a better quality photo of that section where you changed that resistance? I have the same graphics card but they hit it and I see that they removed several pieces but I do not know if it is capacitor or resistance. It would help me a lot

where can i get that python script

Please add repair for gpu no power draw from PSU..

Educational. Just so I understand. Code 43 in memory errors? This totally makes sense for me because I've looked into the game logs and I'm getting memory errors. I'm not getting a hard code 43. My card has been randomly crashing sometimes I'm able to get back to desktop and device manager shows code 43. Real bummer hopefully Gigabyte will RMA card. If they don't do you have a video on how to remove and replace a memory chip?

HELLO BROTHER CAN U HELP.???? I have powercolor rx 580 4gb gpu the problem is the display had went dark while playing game and is not waking up from that state, the pc turns on but no fans spin no display just the fans get a little jerk while pressing the pc power button for turning the pc on. should i be doing this heat up method of vram . could this solve the problem ? i guess the problem is with vram i had it repaired from a local repair shop but the issue is still there after 20 to 30 mins the gpu again goes dark no fans spin no display but the pc stays on. also what could be permanent solution to this problem.

Hi A.S.Repairs excelent video...thanks for that....i have a similar problem with a gtx660 2g with the controler i have no vcore no shorts of course the fan is at 100% no picture, i have 12v, 3.3v, and 5v the controler NCP5395G have the correct 5v vcc and the enable is 0.75v in the datasheet thei say the enable for VR11.1 Threshold is min 400 mV to max to 770mV and the Enable High Input Leakage Current in test conditions is (Pull−up to 1.3 V) so im confuse i dont know if this 0.75V are insuficient for enable the controler or if i have a death controler, some Help gone be very Much apreciated. Thanks. From Brasil.

Thanks for the video. I have some trouble with the same card. I changed the UP9511 because it was damaged and I had no 1.8V, no PEX and no Vcore. Now I have 1.8V, I also have PEX but Vcore is missing. What could be the error? A missing solder connection at the new UP9511?

Dude probably fried card if he inserted backwards....😢 That's impressive that it is "reparable" in some cases by modifying riser.

Hi, what temperature of the heat gun did you use in vram replacing?

I'm documenting my learning with repairing Nvidia graphic cards. In the hope of creating a decision tree, what are people's thoughts on how we can definitively say the core or processor of a card is at fault?

the enable for up9511p is very low like 0.5v ish..on my 1070ti